*6.35 radio and 1.76 spl only*
I've been posting a few kernels in different threads, time for it's own thread now.
This kernel has been tested on several of the 2.1 rogers releases, currently on Seo's rom cause I like minimalist and can add what I want.
It has ext2,3,4, squashfs, tunneling, compcache is available if the rom supports it as is swap.
Right now I have freq tables up to 710, the default boot is 528mhz and min is 122, use set cpu to set up what you want, I personally use 480/672 and have no battery problems at all.
(don't forget to detect freq on first start in setcpu)
-----------------------------------------------------------------------------
*Flash from recovery*
carz-2.6.29-710 kernel This is a new compile with max default at 528 on boot, 710 max with setcpu.
*NEW*
Here are some perflock kernels, screen off 245/245 screen on 480/ * , 528 is same as htc settings. I've eliminated all freq between max and min to minimize switching on each kernel. No setcpu needed!
MD5: 0c7f19441794a0ce27c5eed37baf18f0
carz-2.6.29-528-perflock-v1.0
MD5: 4a3024dbc3333970222d68efb6237903
carz-2.6.29-595-perflock-v1.0
MD5: bc88fdf6f26eb8f1ce7f735622e66b1a
carz-2.6.29-672-perflock-v1.0 < my fav
MD5: d245534b7aad9fa1b85b2cc4e3749077
carz-2.6.29-710-perflock-v1.0
MD5: 49fcf0cdecad0ddf3692d5d211598e96
I found I have to wipe cache and dalvik-cache when going from 710 no perflock to any perflock kernel, also the other way around
-----------------------------------------------------------------------------
I have also put together a recovery for our new radio magics, it's AR's 1.7.0.1 for hero built with my kernel, this new recovery takes care of the slow sd mounting and fixes several issues. It also makes our magics appear as a magic for roms now I believe, I have to check.
recovery-AR-magic+-1.7.0.1
MD5: 762f4272f8d7172e49483d76c8ea91cb
Test it out with fastboot:
Code:
fastboot boot recovery-RA-magic+-v1.7.0.1.img
Flash with fastboot:
Code:
fastboot flash recovery recovery-RA-magic+-v1.7.0.1.img
Thank you Amon-Ra for the recovery work.
-----------------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*NEW*
H3llSp4wN said:
hy folks,
i would like to make a request, i'm stuck at cm6 beacause of psfreedom, but i would like to get back to 2.1 beacause i love sense interface and T9 keyboard,
is it possible to include the psfmod (psfreedom) option in the recovery rom like these -> http://www.psfmod.klutsh.com/ ???
tks in advanced
Click to expand...
Click to collapse
WIN!
Will try it definitely. Thanks for your work man
Thanks.
I`ll definitely try it right now.
Wiping everything an flash it...
thank you for your great work man
[Q] I've built rom that's porting from hero device on your 2.6.29 kernel
and htc 2.6.29 original kernel too and kernel that moded by capychimp but
leds ____ not working
buttons light ____ not working
every thing except above working fine
any idea about that problem?
This Recovery is different from "recovery-RA-hero-v1.7.0.1.img"? They this dont work with Magic 32A.
Thanks.
ferrarinews said:
This Recovery is different from "recovery-RA-hero-v1.7.0.1.img"? They this dont work with Magic 32A.
Thanks.
Click to expand...
Click to collapse
yes, it works now, i put my kernel in the image, works great
senbad said:
thank you for your great work man
[Q] I've built rom that's porting from hero device on your 2.6.29 kernel
and htc 2.6.29 original kernel too and kernel that moded by capychimp but
leds ____ not working
keyboard light ____ not working
every thing except above working fine
any idea about that problem?
Click to expand...
Click to collapse
Keyboard? on a magic? anyways, no idea, it's rom related not kernel.
carz12 said:
Keyboard? on a magic? anyways, no idea, it's rom related not kernel.
Click to expand...
Click to collapse
sorry for my english
i mean buttons home, menu, search and back
anyway thank you for your reply
senbad said:
sorry for my english
i mean buttons home, menu, search and back
anyway thank you for your reply
Click to expand...
Click to collapse
Hey no problem, have you tried any of the drivers in the 2.1 rogers release?
carz12 said:
Hey no problem, have you tried any of the drivers in the 2.1 rogers release?
Click to expand...
Click to collapse
of course but does not change
senbad said:
of course but does not change
Click to expand...
Click to collapse
got a link to your rom? i'll take a look
carz12 said:
got a link to your rom? i'll take a look
Click to expand...
Click to collapse
thank you for your interest
I sent the link in pm
I've added a few perflock kernels in OP
In linpack i get only 2.1 mflops. Why? Im using first of your kernels.
Sent from my HTC Magic using Tapatalk
Does perflock mean that I don't have to install/use setcpu to use OC?
This kernel is for flashing through the recovery, if I want to put in ROM, as I do?
Thanks.
psfmod for 32A
hy folks,
i would like to make a request, i'm stuck at cm6 beacause of psfreedom, but i would like to get back to 2.1 beacause i love sense interface and T9 keyboard,
is it possible to include the psfmod (psfreedom) option in the recovery rom like these -> http://www.psfmod.klutsh.com/ ???
tks in advanced
hi carz12,
great work man!
I've flashed your kernel (first in the list) and setCpu 480/672...and my linpack score is only 2.54
can this be related to the recovery? I'm not using recovery-AR-magic+-1.7.0.1, but instead the old and reliable recovery-RA-Magic32A-6.35-v1.6.2NewRecovery.
please let me know what you think...
alex_canada said:
hi carz12,
great work man!
I've flashed your kernel (first in the list) and setCpu 480/672...and my linpack score is only 2.54
can this be related to the recovery? I'm not using recovery-AR-magic+-1.7.0.1, but instead the old and reliable recovery-RA-Magic32A-6.35-v1.6.2NewRecovery.
please let me know what you think...
Click to expand...
Click to collapse
Hmm, I'm getting 2.85 with that kernel, I have noticed a reboot after loading completely the first time helps.
The recovery doesn't load at all on a normal boot so it it shouldn't affect the rom at all as far as I can see.
cypis said:
In linpack i get only 2.1 mflops. Why? Im using first of your kernels.
Sent from my HTC Magic using Tapatalk
Click to expand...
Click to collapse
did you install setcpu? it defaults to 122/528 if not
mastermid said:
Does perflock mean that I don't have to install/use setcpu to use OC?
Click to expand...
Click to collapse
no need for setcpu
ferrarinews said:
This kernel is for flashing through the recovery, if I want to put in ROM, as I do?
Thanks.
Click to expand...
Click to collapse
you can take the zImage and combine it with your ramdisk and make a boot.img, use my wlan.ko and ramzswap (if you want to enable compcache)
H3llSp4wN said:
hy folks,
i would like to make a request, i'm stuck at cm6 beacause of psfreedom, but i would like to get back to 2.1 beacause i love sense interface and T9 keyboard,
is it possible to include the psfmod (psfreedom) option in the recovery rom like these -> http://www.psfmod.klutsh.com/ ???
tks in advanced
Click to expand...
Click to collapse
Hmm' I'll have a look
Related
As usual I replaced wlan.ko and included Rogers AudioPara4.csv (thanks bcrook).
See original thread for changelog thanks and disclaimer!
See this thread to get information about the kernel reverse engineering procedure!
JACxHEROski v1.7r2 32A Devices with Amon RA's v1.1.0 Kernel (rapidshare) (mediafire)
[md5 sum: ad09700cbd31e8e3b0e20a29ea12af25]
LOCKSCREEN Wallpapers
To change lockscreen wallpaper, first download and unzip the file somewhere then cd to it and use this command:
Code:
adb push wallpaper_file_name_here.jpg /system/etc/lockscreen/port/htc_wallpaper_01_lockscreen.jpg
Note that we are replacing a file so the destination filename must always be htc_wallpaper_01_lockscreen.jpg
If you want to use your own lockscreen wallpaper, then use an image editing software (like GIMP) to resize the image to 455x320 pixels. Then push it using the command shown above.
Older Versions:
JACxHEROski v1.6r2 32A Devices with Amon RA's Kernel v1.1.0 (rapidshare) (mediafire)[md5 sum: 460d06ab60db1895ec60eefa9f26b48c]
JACxHEROski v1.4 32A Devices (rapishare)
JACxHEROski v1.4 32A Devices with Amon_RA's Kernel v1.0.1 (rapishare)
Special thanks to: Amon_RA for his porting instructions and for fixing the kernel bugs, JAC and ccyrowski for their excellent rom, TigerTael rayman84 and gboddina for Kernel reverse engineering and building!
p.s. As with all Hero roms, bluetooth and LEDs (only green one works) may not work properly!
really tempting, i was use 1.2 for 32A, fast enough..
[ROM][PORT] JACxHEROskiv1.3 for 32A [8/19/2009]
is the BT working??
L10nH34Rt said:
p.s. As for all Hero roms, bluetooth and LEDs may not work correctly!
Click to expand...
Click to collapse
i guess not..
I can not install this ROM
I installed JacXHero 1.2 before but I can not install this ROM,
I wiped my data before install new ROM but my device did not boot after apply update.zip
Do you have a 32A device? Is it MT3G? Sorry I have an HTC Magic 32A device and cannot test MT3G devices.
p.s. Notification LED on twitter is working for me, but not when charging or missed call etc. But still that's sth right?
H and E icons working?
Are Hsdpa/Edge icons present in this rom? Previous one only shows G/3G in I remember.
I think not, though I can't really test because I don't have HSDPA in my area. But its just an icon! If you know where it is located then you can push it via adb I suppose...
what is the difference between this jacheroski and jacheroski 2.7.4r2.. is that just someone elses additions to jachero1.2
i installed this on my mytouch and everything seems to work fine, except for bluetooth and for some reason the home screen takes for ever to load.... any one know why this happens? or what's the BEST hero rom for a 32A mytouch?
Double post. Delete plz.
Howler62 said:
what is the difference between this jacheroski and jacheroski 2.7.4r2.. is that just someone elses additions to jachero1.2
Click to expand...
Click to collapse
Yes its JAC with ccyrowski's help (check original thread)
mixer5911 said:
i installed this on my mytouch and everything seems to work fine, except for bluetooth and for some reason the home screen takes for ever to load.... any one know why this happens? or what's the BEST hero rom for a 32A mytouch?
Click to expand...
Click to collapse
Try Drizzy's no name Hero v3 (ported by bcrook). Here you are!!
That's the best hero rom for me atm. I bet most optimization in this rom is done in the kernel which we can't use if HTC doesn't release the source...
I just found one that all works for me (32A)
I'm in love for my hero
Search myhero-08 and you'll get it
somebody please include this lock scren in the build..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Or make a tutorial how to push this Hero Lock Scren into this rom..
i would really apreaciated..i see this lock screen on Fatality and MyHero 0.1.0
thanks
1.4 Up Already
1.4 is up here: http://forum.xda-developers.com/showthread.php?t=534479
Yes I will port tomorrow (currently not at my linux box). JAC says this has fully working LEDs Yay!!
@lesjow: I will find the solution. Its just some jpgs needed to be pushed from other roms
i see the original firmwares are getting all these new kernel and kernel mods.
Are we missing out on anything since ports are done by replacing the kernel with rogers version?
Wipe/flash wont boot
i recovery boot, wipe the handset, flash this rom, reboot
and IT HANGS AT THE MAGIC SCREEN
THATS IT.
i tried 1.4 by the way HTC MAGIC 32A 288MB
L10nH34Rt said:
Yes I will port tomorrow (currently not at my linux box). JAC says this has fully working LEDs Yay!!
@lesjow: I will find the solution. Its just some jpgs needed to be pushed from other roms
Click to expand...
Click to collapse
Please include that lockscreen in your next port...btw, i believe its not just some jpegs, the curve box seem integrated with the lockscreen app, coz if your change wallpaper of lockscreen, the curve box (with carrie and date in it) will still exist...
i just hope you find a way to push it..
thank you..thank you..thank you...
mack said:
i see the original firmwares are getting all these new kernel and kernel mods.
Are we missing out on anything since ports are done by replacing the kernel with rogers version?
Click to expand...
Click to collapse
Yes and that's sad... We don't have a choice until HTC releases source.
ftg888 said:
i recovery boot, wipe the handset, flash this rom, reboot
and IT HANGS AT THE MAGIC SCREEN
THATS IT.
i tried 1.4 by the way HTC MAGIC 32A 288MB
Click to expand...
Click to collapse
1.4? But it hasn't been ported yet! Did you flash the dream version? Flash the version I posted here and be sure to wait quite a while (at least 3 mins) on first boot!
lesjaw said:
Please include that lockscreen in your next port...btw, i believe its not just some jpegs, the curve box seem integrated with the lockscreen app, coz if your change wallpaper of lockscreen, the curve box (with carrie and date in it) will still exist...
i just hope you find a way to push it..
thank you..thank you..thank you...
Click to expand...
Click to collapse
Yes i think there are some files that control the lock/unlock images of the lockscreen but not the wallpaper.
Here is the latest Ziggy471 kernel for the Bravo, this is a sense kernel. I will be maintaining this thread on behalf of ziggy471 as I worked with him in the development of this kernel. I will be taking most questions and support within this thread.
Code:
Changelog:
Added LZMA compression for the kernel image, makes it uber small. This should help with the few non-booters still left. Also, since it’s so small, EVERYTHING is built in, except wifi and on the EVO, wimax.
Moved the default boot speed back down to 998MHz, didn’t realize that some couldn’t run 1.113GHz, sorry about that.
Removed ALL debugging support in the kernel, this will speed it up and also makes it smaller.
Everything else is still the same, ck2, BFS357, BFQ, SLUB, CIFS, EXT4, gpu+, sd card speed up, etc…
Until I figure some things out with the AOSP kernels, I will not be releasing anymore, sorry.
Finally, for those that asked about the tweeks script I posted, it’s set for 1.113GHz max, if you want something different, edit the script and reboot. It’s the same script I had included in previous kernels, but had taken out for reasons.
Download Here
Source: http://github.com/ziggy471
Just a screen of the bench i got on my personal built rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yay awesome! Thank you for sharing
I'll also be dropping in from time to time to help Jugs out.
Z
is there a chance to get this kernel for AOSP Rom´s?
golf60 said:
is there a chance to get this kernel for AOSP Rom´s?
Click to expand...
Click to collapse
He may do one, as of right now i think his plate is full.
it will be nice when we can get such a kernel with AOSP Code. It runs very good on the aurax rom....
thanks for that kernel Jugalo but somehow its not working for me, its just get stucked at the splash screen after i flash it! can you please help me solve the problem?
opened as sources available now.
And we're back
drivers/undervolt
avs also there
golf60 said:
is there a chance to get this kernel for AOSP Rom´s?
Click to expand...
Click to collapse
Juggalo_X said:
He may do one, as of right now i think his plate is full.
Click to expand...
Click to collapse
golf60 said:
it will be nice when we can get such a kernel with AOSP Code. It runs very good on the aurax rom....
Click to expand...
Click to collapse
I'll eventually try and get to the AOSP too, but as Jugs said, my plate is full right now.
Z
I have test it for LeeDroid 2.2d,wifi not work,can't open
It would be nice a aosp ROM Kernel with this Features.
miyu-hitori said:
I have test it for LeeDroid 2.2d,wifi not work,can't open
Click to expand...
Click to collapse
hi,
i had the same prob.
i copied the wifi module bcm4329.ko from the kernel.zip manually into /system/lib/modules.
i also had to copy the screenstate-scaling script manully into /etc/init.d
than it worked like a charm.
have fun.
m.
Hi thanks for this great mod of Kernel but it doesn't work for me, I'm under AuraxTSense 7.9 with Richardtrip Kernel V5 and all work well. After to have flashed my phone with your "[KERNEL] Ziggy471 Bravo 26 Oct" my Desire stay freeze in the splash boot and don't want to boot...then i have re flashed my phone with richardtrip kernel and all is good again.
Can you help me or what I'm doing wrong ?
Regards, Oijkn.
juberg said:
hi,
i had the same prob.
i copied the wifi module bcm4329.ko from the kernel.zip manually into /system/lib/modules.
i also had to copy the screenstate-scaling script manully into /etc/init.d
than it worked like a charm.
have fun.
m.
Click to expand...
Click to collapse
That's really odd, since those lines are in the the updater-script, so idk what the issue was.
Oijkn said:
Hi thanks for this great mod of Kernel but it doesn't work for me, I'm under AuraxTSense 7.9 with Richardtrip Kernel V5 and all work well. After to have flashed my phone with your "[KERNEL] Ziggy471 Bravo 26 Oct" my Desire stay freeze in the splash boot and don't want to boot...then i have re flashed my phone with richardtrip kernel and all is good again.
Can you help me or what I'm doing wrong ?
Regards, Oijkn.
Click to expand...
Click to collapse
Did you verify the downloaded file against the md5sums I posted, I know I had a few people that had bad downloads before.
Z
Oijkn said:
Hi thanks for this great mod of Kernel but it doesn't work for me, I'm under AuraxTSense 7.9 with Richardtrip Kernel V5 and all work well. After to have flashed my phone with your "[KERNEL] Ziggy471 Bravo 26 Oct" my Desire stay freeze in the splash boot and don't want to boot...then i have re flashed my phone with richardtrip kernel and all is good again.
Can you help me or what I'm doing wrong ?
Regards, Oijkn.
Click to expand...
Click to collapse
You posted same problem on Ziggy's site and here and in both places you didn't take the trouble to read previous post talking about the same issue...
ziggy471 said:
That's really odd, since those lines are in the the updater-script, so idk what the issue was.
Did you verify the downloaded file against the md5sums I posted, I know I had a few people that had bad downloads before.
Z
Click to expand...
Click to collapse
I verified it, and don't know any ppl with aurax and this kernel working ok
PS- Sorry about double posting.
ziggy471 said:
That's really odd, since those lines are in the the updater-script, so idk what the issue was.
Did you verify the downloaded file against the md5sums I posted, I know I had a few people that had bad downloads before.
Z
Click to expand...
Click to collapse
+1
Having same problem, bootloop @ splash screen...
Any idea/solution?
Sent from my HTC Desire using XDA App
@ziggy471 : Thanks for quickly reply, yes i have checked if the md5sums is the same and all is good. I don't know really why your moded kernel don't work. If you need some informations about the AuraxTSense ROM i can help you if you want, i can understand that you don't want to re flash your phone every day ^^
@Broquen : Hi, I have posted in both site and what is the problem mate ?? It's forbidden ?? And yes i have read the previous post but I have not found any solution to my problem, sorry.
Hi, I've compiled for my HTC Magic the Cyanogenmod rom from source.
I want to share it, maybe someone want this on his magic.
I want to thank yoshi, looking at his rom helped a lot! And farmatito for his kernel!
Thank to sada23 for the testing and the support and bug fixing!
For the Dream you need DangerSPL.
07.08.11 UPDATED!
- Updated to Android 2.3.5 and the various bugfixes of the Cyanogenmod
04.07.11 UPDATED!
- More compcache dimension values (66 max)
02.07.11 UPDATED!
19.06.11 UPDATED!
-videos now work (thanks to sada23)
18.06.11 UPDATED!
-bluetooth now it's working also on dream and 32b (Thanks to sada23)
15.06.11_2 UPDATED!
-Jit Enabled
-heap size 24m to avoid out of memory
-Working also on 32b and Dream (except for bluetooth)
ROM:
update-cm-7.1.0-Jordan-DS-07.08.11.zip
farmatito's Kernel:
auto-boot-2.6.35.13-farmatito-pershoot-ds-BFS%2B-20110518.zip
Gapps:
gapps-gb-20110307-signed.zip
Some Dream photos:
PHOTO 1
PHOTO 2
PHOTO 3
Some Magic 32a photos:
PHOTO 1
PHOTO 2
HIGHLY EXPERIMENTAL AND UNSUPPORTED AND ALSO UNOFFICIAL.
flash it at your own risk and all comments are useful!
-Do a Wipe
-Flash the rom
-Flash gapps
-Flash the farmatito's kernel or ezterry's one, it depends on what works for you
-Reboot
When I'll build new version I'll upload here.
Very interesting!
It will fill a gap in the Old Radio section. It's the only based on CM. I will test it and as soon as i can i will give some feedback.
Greetings
Thank you,
Updated the .zip .. su wasn't working
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have one question. This kernel is made by you or can i use farmatito's or pershoot's kernel?
Unkjcr said:
I have one question. This kernel is made by you or can i use farmatito's or pershoot's kernel?
Click to expand...
Click to collapse
I have not compiled any kernel. I've used the kernel from yoshi rom because it worked well with my compiled system and radio/spl.
I'm new to the Magic's XDA room because I have bought this phone a couple of days ago. If you can mention to me who thanks for the kernel I will append their names to the first post, I don't want to stole anyone's work.
Also for the question, I don't know the answer.. I'm new to this phone and it's not my main phone so I don't use it so much.. If you can do some experiments I think it will be useful also for others.
Jordan5222 said:
I have not compiled any kernel. I've used the kernel from yoshi rom because it worked well with my compiled system and radio/spl.
I'm new to the Magic's XDA room because I have bought this phone a couple of days ago. If you can mention to me who thanks for the kernel I will append their names to the first post, I don't want to stole anyone's work.
Also for the question, I don't know the answer.. I'm new to this phone and it's not my main phone so I don't use it so much.. If you can do some experiments I think it will be useful also for others.
Click to expand...
Click to collapse
Ok. I will test those two and after that i'll give feedback. Does it feel faster or stabler than Ginger Yoshi in your opinion? I know that the a creator always think that his work is the best, but i can't help it to ask anyway.
I've used ginger yoshi for about 5 minutes just to see if angry birds runs also on others rom so slow...
I don't know what rom it's faster sorry
Hi again!
I can confirm that both farmatito's and pershoot's kernel works with this ROM. The ROM boots ok, but it seems a little slow. Not slower than Yoshi, but slower than carz's CM7. I don't think yoshi is a good ROM for you to look at in order to enhance your ROM. I don't know why, and it could be something that i do wrong, but Ginger Yoshi is the slowest GB ROM for Magic right now.
About your ROM itself. I think multi-language should be a priority in your list. I get some FC here and there, but nothing unbearable. In short, it's a pretty good ROM for a first try! Although i think it still needs some work on it.
I'll keep an eye on this thread. Keep up with this work. It as potential. Good luck!
Greetings
Fantastic work!
Brilliant Rom, I couldn't find any GB Roms that would work on my phone and then stumbled upon this one ;-).............fantastic.
One issue though...........I have the same radio and spl as the creator but whenever I try and use live wallpapers they all force close, except maps?!?
It may be the kernel but I thought I would ask if any one has has similar issues.
I will take a look to live wallpaper crashes today, maybe I can find what is wrong.
Sent from my Nexus S using XDA Premium App
One issue though...........I have the same radio and spl as the creator but whenever I try and use live wallpapers they all force close, except maps?!?
It may be the kernel but I thought I would ask if any one has has similar issues.
Click to expand...
Click to collapse
I get it work. Go to the Settings menu, Cyanogenmod, Performance, and put the VM size to 24 mb, and also turn on the JIT Compiler.
We were running out of memory with the bitmap of the wallpaper. In the next release I'll try to hard code this options into the rom.
Also if you're not using live wallpaper that things will help with performance.
Now with the cpu at 614 mhz I'm doing 360-370 on Quadrant
I'm downloading your rom now. I'll try it soon. Thank you for your job!
Feedback soon....
Bye
acronimo said:
I'm downloading your rom now. I'll try it soon. Thank you for your job!
Feedback soon....
Bye
Click to expand...
Click to collapse
don't forget to change the settings as I said in my previous post to avoid out of memory
Hi Jordan thank for your tips!
The ROM CM7.1 is very fast compared to Yoshy ROM and everything seems to work perfectly. I'll try this rom in next days.
Thanks thanks thanks a lot!!!!
Does it work with SPL & Radio shipped on 32A?
ajejebrazorf said:
Does it work with SPL & Radio shipped on 32A?
Click to expand...
Click to collapse
Sorry, I don't know. I have not tested it or better, I don't even know what are the original SPL and Radio because I've bought the magic used.
ajejebrazorf said:
Does it work with SPL & Radio shipped on 32A?
Click to expand...
Click to collapse
I have SLP 1.33.2010 and Radio 3.22.20.17 MAGIC 32A TIM
This Rom is faster and faster, finally my phone is a rocket ;-) !! Tips from Jordan (put the VM size to 24 mb, and also turn on the JIT Compiler) are perfect.
I use also AUTOKILER whit setting "STRICT 60,70,80" and my battery now at 8:00PM has 60% charg!!! WOW ...
Best rom in shappire section in this moment!!!
It seems everything work, but I'll have to test the rom for at least 5 or 6 days...
Thanks Jordan!
I have:
SPL 1.33.0008
RADIO: 3.22
Best rom on my 32b..a little bug..wifi doesn't work..it says me Error when i try to turn on it..
Fix this bug..
!_Ale13star_! said:
Best rom on my 32b..a little bug..wifi doesn't work..it says me Error when i try to turn on it..
Fix this bug..
Click to expand...
Click to collapse
I don't have a 32b to test on it. Can you help me to find the bug in private message?
UPDATES available on: www.infinimod.com !
Click to expand...
Click to collapse
Of course, this rom is in beta right now, it is working, but you may encounter lag, or long loading times, or running out of data errors. This will be fixed in future releases by either xillius200, infinimint, or e334.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Gingerbread 2.3.3 with Sense 2.1
Basic Informations:
Benefits:
- Changable Sense Design
- Gingerbread Base
- Great potential ^___^
- HVGA
- Newest HTC apps and widgets
- Pretty
Newest Updates:
- Booting
- Basebuild from sebastianFM 1.1
- Removed incompatible files
- Added init.d, via ramdisk /sbin/ (thanks to ezterry)
- Added "Audiohack" from ezterry builds (thanks to ezterry)
- Squashed framework and fonts
- zRam (big thanks to ezterry again!)
- Sense 3.0 lockscreen (thanks SebastianFM!)
- Optimized Ramdisk
- Custom MTD required. - 190 mb system partition
- Apps2SD (thanks to villain rom's)
- Updated host file
Working:
- WiFi
- Data Connection
- Sensors (Rotation)
- Superuser
- GPS
Not Working:
- Camera/Camcorder
- Bluetooth
- What else.. tell me or xillius200
Click to expand...
Click to collapse
How To: Flash & Register for HTC Sense:
Flash:
#1: Push this file on your sdcard - root directory: mtdpartmap.txt
#2: Flash the MTD Dream Recovery (only if you still have not flashed it): AmonRA 1.7 MTD Recovery ***
#3: Flash Ohsaka Superwipe: Ohsaka Superwipe
#4: Reboot into recovery!
#5: Flash Recovery Patch: FR - Recovery Patch 1.5.9
#6: Flash Ohsaka Superwipe and reboot into recovery.
#7: Flash ROM! Download here:(Current = Test12_GBV1): (Click Me for Mirror Download)
#8: Flash Kernel!: .36 2708/ebi0/ebi1 compatible kernel;Mirror Download
#9: Flash Bootpatch: FR - Boot Patch 1.5.9
#10: Do the setup, open task killer and set to moderate, and reboot into recovery.
#11: Flash WiFi-Fix: WiFi-Fix signed;Mirror
#12: Sit back and enjoy Gingerbread Sense!
Click to expand...
Click to collapse
Register for HTC Sense: (Completely Optional)
#1: HTCSense.com
#2: Register there
#3: Put "Desire Z" as your device.
#4: Verificate your account via email
#5: Log into this account via phone
#6: Say "yes" to: That's another phone as you mentioned in register formular!
#7: You're done
Click to expand...
Click to collapse
!!!CREDITS!!!
e334 (Developer), xillius200 (Developer), Infinimint (Developer), EZTerry, jcarrz1 (for starting the gingerbread sense craze and making the first 2.3.3 gingerbread sense port ) sebastianFM (32A Port), Rushness (Screenshots & Threaddesign, Mental help ), pulser_g2, Roalex (For his d/s version of test 8), Effdee, Firerat, Cyanogen, and Neopeek!
Also, thanks to everyone who tested in the WIP Sense test thread! Located here>>http://forum.xda-developers.com/showthread.php?t=979088<< If you like this rom, don't forget to press "thanks" for jcarrz1 also!
Screenshots (Thanks Rushness! ):
Click to expand...
Click to collapse
Troubleshooting through logcat: -shows /system/bin/sh error: You did not flash custom mtd correctly, please double check your procedures and follow directions closely!
-nothing shows in logcat after 5 min: You did not flash kernel
-libsurfaceflinger/etc/etc has died: Possible that you have not partitioned sdcard correctly. You need a fat32 partition, 512mb ext4 partition, and a 64mb swap partition.
-phone reboots into recovery for no reason: Please fastboot wipe and closely follow the procedures again.
-I did everything correctly but my phone still won't boot! There is a chance that you did not remove your old 1.5.6 Custom MTD Before flashing Custom MTD 1.5.9 alpha3. Please remove your old version 1.5.6 Custom MTD and then boot into bootloader and type in 'fastboot erase system -w' and then re-flash custom MTD 1.5.9.
Click to expand...
Click to collapse
roalex said:
Code:
[COLOR="Red"]***[/COLOR] [B]Optional recovery for Dream 32B ONLY available here:[/B]
Code:
[B]Experimental[/B] and not [B]recommended[/B] for people who know what they are doing and have no other questions to ask ;)
[B][URL="http://www.multiupload.com/U9YEZQ6276"]For HTC Dream 32b ONLY[/URL] [/B] - ClockworkMod Recovery v3.0.2.4
[U]THIS IS NOT FOR SAPPHIRE, MAGIC, ROGERS DREAM, 32A devices ![/U]
NOTICE for S-ON ppl :
Best to have a working rom before messing with this, that way you can easily flash an older recovery without having to flash the .nbh (as in boot up the rom, flash_image recovery name.img)
Can view the unpacked img [URL="https://github.com/roalex/HTC-Dream-Recovery"]Here[/URL]
Click to expand...
Click to collapse
To do list-Include 2708 710mhz overclock kernel for 32B devices
-App Data to ext
-Fix bluetooth or camera
-improve speed
-decrease system size (190 is too much :S)
Click to expand...
Click to collapse
Postholder ^^
great..this is great...
e334, why don't just integrate the wifi fix into the rom directly? cause i tried that before with test12 and wifi is working properly for me even during setup screens.
xillius200, go change ur link in the signature
edit : e334, i thought you are going to release new version with this thread, thats why said bout the wifi fix..lols..anyway the download rom link should be in the step by step after "flash the ROM" cause it will be easier to find.
It was slow for me if I flashed rom, kernel, boot patcher, wifi, and then reboot.. Next version will be better, with xillius200's optimization
e334 said:
It was slow for me if I flashed rom, kernel, boot patcher, wifi, and then reboot.. Next version will be better, with xillius200's optimization
Click to expand...
Click to collapse
oh,thats not what i meant, i meant include the wifi fix directly inside the rom zip. and after that just flash the rom. but of coz this can be made with next release
Yeah, I or xillius200 will do that next time
e334 said:
Yeah, I or xillius200 will do that next time
Click to expand...
Click to collapse
already added in xD hope it works gotta check later lol
Nice job Xillius200 and e334 i will be flashing this tonight! Wanting to the the HTC Sensation whenever it gets to the states!! so this will be fun to play with!!
Edit: Not bad speed it slows at times, but then speedy at others. love the UI!! really makes me want the htc sensation lol
Yay! My Thread
Whoever made this cool signature, gimme one, cause fonts are from me <3
Best ROM ever <3
OK this is a dumb thing to ask but why do we have to signup and give our fone number to HTC for this rom?
But I must say this looking very very nice. Thanks for your hard work
EDIT=I see it's for apps used in HTC Sense...or have I got it wrong...
EDIT-2=I tried all what was on the OP and nothing worked so I flashed ezBiffTestKernel20101031-ebi0_S.zip now it's booting.
I don't have a ram hack or anything like that so that could be the problem..will post back when it's done.
Rushness said:
Yay! My Thread
Whoever made this cool signature, gimme one, cause fonts are from me <3
Best ROM ever <3
Click to expand...
Click to collapse
xD if your on about the signature in mine and e334 that woulde be me I just modified yours a tiny bit made it longer and chnaged colours xD your signature was awesome!!!! just a bit to big height wise lol
think made too long though xD my screen resolution is 1920x1080 so looks ok for me lol at work it's off the damn screen xD
So far so good after flashing ezBiffTestKernel20101031-ebi0_S.zip
For anyone else flashing this rom I would get Droid Explorer and use it's log cat console so you can see when the rom has finished installing
as it takes a long time.
Going to put some apps on now and see(it only shows 6.4MB free in settings)
it won't sign into my gmail account says "can't establish a reliable Data connection" wireless is working ok.
No lights on the keyboard when you open it and no virtual keyboard showing.
And when I call the phone it lights up but no sound untill about 30 secs after.
This will be a great rom when the beta is over.
deuse said:
So far so good after flashing ezBiffTestKernel20101031-ebi0_S.zip
For anyone else flashing this rom I would get Droid Explorer and use it's log cat console so you can see when the rom has finished installing
as it takes a long time.
Going to put some apps on now and see(it only shows 6.4MB free in settings)
it won't sign into my gmail account says "can't establish a reliable Data connection" wireless is working ok.
No lights on the keyboard when you open it and no virtual keyboard showing.
And when I call the phone it lights up but no sound untill about 30 secs after.
This will be a great rom when the beta is over.
Click to expand...
Click to collapse
see the extra ram from 2708 may help that lol may be the kernel or the lack of ram doing most of that xD except no light son keyboard lol but blah ^^ it will get sorted eitherway lol btw if you aint already suggest setcpu and 128mhz/614mhz or soemthing xD
how is battery going?
does new farmatito's kernel works with this rom?
thanks for answers, cheers
mat0122 said:
how is battery going?
does new farmatito's kernel works with this rom?
thanks for answers, cheers
Click to expand...
Click to collapse
Not sure ain't been tried but.... should work just fine ^^
xillius200 said:
see the extra ram from 2708 may help that lol may be the kernel or the lack of ram doing most of that xD except no light son keyboard lol but blah ^^ it will get sorted eitherway lol btw if you aint already suggest setcpu and 128mhz/614mhz or soemthing xD
Click to expand...
Click to collapse
How about putting info on what you need to do if you have a normal G1 with out a ramhack in the OP as it don't say
this will stop people(like me)getting confused
deuse said:
How about putting info on what you need to do if you have a normal G1 with out a ramhack in the OP as it don't say
this will stop people(like me)getting confused
Click to expand...
Click to collapse
xD I didn't have any part in the OP lol ^^ but yeah ill get e334 to add about non-2708 users lol na probably didn't add cause non-2708 users are pretty rare now lol but ill get him to add ^^ Most likely will say upgrade to 2708 or soemthing not sure lol depends how optimizing keeps going ^^
lol ill send him a message once home from work.....ahhh another 25 mins :S
Thanks mate...Looks like I will have to do the ram hack now as I like this rom.
You got a link to th epost for it?
deuse said:
Thanks mate...Looks like I will have to do the ram hack now as I like this rom.
You got a link to th epost for it?
Click to expand...
Click to collapse
here you go ^^
http://forum.xda-developers.com/showthread.php?t=831139
btw where abouts in UK are you from lol
xillius200 said:
here you go ^^
http://forum.xda-developers.com/showthread.php?t=831139
btw where abouts in UK are you from lol
Click to expand...
Click to collapse
Solihull in the west mid's mate...Thanks for the link I will look at it now.
I ported Cyanogenmod 9 for the Hero build by Jordfaz. (Thanks to him!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloadlink: Cyanogenmod 9
Installation:
- Flash Lights_format_all (See other thread!)
- Flash CM9
- Reboot
- 32B: Flash a 32B kernel after flash of the ROM
After installation
- After boot: Go to ADWSettings - system - advanced - enable wallpaper hack and scroll cache: low quality --> This will fix your UI.
- To disable CRT-animation: Displays - animation OFF (Thanks toi SaySpaceman! ;p)
Working:
- Calls/SMS
- Data
- Youtube!
- Screenshot!
- Perfect rotation!
- ...
Not working:
- Bluetooth
- GPS
Changelog:
Code:
-- Cyanogenmod 9 --
v1.0
* Initial release
Hit the THANKS button, if you use this ROM!
I will complete this thread at a later time, but for the next month I'll have to study a lot , so maybe no time for uploading and completing thread.
You can disable the CRT animation. You go to Settings->Display->You turn off the Screen off animation.
I haven't found any bugs yet, everything works very smooth and even YouTube works! :good:
I think this is the best ROM for our "legacy" device
SaySpaceman said:
You can disable the CRT animation. You go to Settings->Display->You turn off the Screen off animation.
I haven't found any bugs yet, everything works very smooth and even YouTube works! :good:
I think this is the best ROM for our "legacy" device
Click to expand...
Click to collapse
Thank you! Didn't know you could manually enable/disable it.
i really want to try this rom in my old htc magic!
I would like to know wich recovery do you use and recommend to flash your rom.
another question is the funcionability of the apps with this rom
thank you for all your work for "our" device.
stiker said:
i really want to try this rom in my old htc magic!
I would like to know wich recovery do you use and recommend to flash your rom.
another question is the funcionability of the apps with this rom
thank you for all your work for "our" device.
Click to expand...
Click to collapse
I think you can only flash it with CWM recovery.
All apps that work on GB, will work in ICS.
But the Play Store will show a lot more apps, but a lot of them will force close when you try to open them.
But in general, everything should be smoother.
ok. This rom is good. But it is slow when download from playstore. Thanks!
Thanks for CM9, i was looking for some stable rom
I will try this ROM and will let u know my findings
Thank you for porting this over. I have neglected my HTC Magic for quite some time now, finally got it out, dusted it and went through the flashing bits for this. Stable and much smoother than I expected to have on a (relatively) dated device. Are the processor options under 'Performance' settings disabled or is it meant to be on 'ondemand' all the time?
Yanguang said:
Thank you for porting this over. I have neglected my HTC Magic for quite some time now, finally got it out, dusted it and went through the flashing bits for this. Stable and much smoother than I expected to have on a (relatively) dated device. Are the processor options under 'Performance' settings disabled or is it meant to be on 'ondemand' all the time?
Click to expand...
Click to collapse
You can't change any options in Performance. I'll see if I can change that, because now, if the displayed CPU speeds are right, the CPU is constantly running on 710 Mhz when you used it.
Default cpu frequence 710MHz is not stable enough to bootup my phone, could you please lower down to 650MHz please?
jejer said:
Default cpu frequence 710MHz is not stable enough to bootup my phone, could you please lower down to 650MHz please?
Click to expand...
Click to collapse
Did you try to flash it? My phone doesn't run on 710 either, but it does boot.
Yes, I flashed it. During boot, cat /proc/cpuinfo get 710MHz and boot failed. After set it to 620MHz, it bootup success.
Your ROM works great, thanks!
jejer said:
Yes, I flashed it. During boot, cat /proc/cpuinfo get 710MHz and boot failed. After set it to 620MHz, it bootup success.
Your ROM works great, thanks!
Click to expand...
Click to collapse
Ok, thanks! I'll set it to a lower speed in next version.
I would really advise against overclocking by default. The majority of these devices can overclock to acceptable speeds, but others can't do much at all. My mytouch 3g, for example, would freeze at anything above 595mhz, and it was most stable at 537 or below. So even with that lower overclock you decided on, I still wouldn't be able to use this without modifying the rom.
There are plenty of ways to make this recommended, but optional. You could put an oc script in a separate zip to flash. Or you could start using the fancy Aroma installer. Ezterry's yesno binary is really easy to implement.
tvall said:
I would really advise against overclocking by default. The majority of these devices can overclock to acceptable speeds, but others can't do much at all. My mytouch 3g, for example, would freeze at anything above 595mhz, and it was most stable at 537 or below. So even with that lower overclock you decided on, I still wouldn't be able to use this without modifying the rom.
There are plenty of ways to make this recommended, but optional. You could put an oc script in a separate zip to flash. Or you could start using the fancy Aroma installer. Ezterry's yesno binary is really easy to implement.
Click to expand...
Click to collapse
I didn't know the cpu was running at a higher speed. I thought it was a bug in performance section, who was showing the wrong speed, since my HTC Magic normally freezes at 710 Mhz.
It's been years since I last flashed a MyTouch3G (32B)... Just got back one that I'd gifted away two years ago, it decided not to boot around Christmas and I brought it home to wipe/reflash.
Glad to see work still being done on this old device! It's ahead of my G2X in Roms.. That's effin sad.
Now if I can just remember how you flash a kernel on this thing....
EDIT:
I'm a bit confused about the kernel.... the thread linked doesn't actually seem to be any specific kernel??? More "how to flash a kernel safely" and hboot/radio files. I already have the required hboot/radio! So which kernel do I use??
EDIT 2:
N/m.... can't be assed to sit here all night trying to figure out which kernel to use on an antique phone. Went with Gingerbread instead.
tutorial and links - SPL/radio/ROM
lotherius said:
It's been years since I last flashed a MyTouch3G (32B)... Just got back one that I'd gifted away two years ago, it decided not to boot around Christmas and I brought it home to wipe/reflash.
Glad to see work still being done on this old device! It's ahead of my G2X in Roms.. That's effin sad.
Now if I can just remember how you flash a kernel on this thing....
EDIT:
I'm a bit confused about the kernel.... the thread linked doesn't actually seem to be any specific kernel??? More "how to flash a kernel safely" and hboot/radio files. I already have the required hboot/radio! So which kernel do I use??
EDIT 2:
N/m.... can't be assed to sit here all night trying to figure out which kernel to use on an antique phone. Went with Gingerbread instead.
Click to expand...
Click to collapse
<<Check my signature below!>>
<<Goog flashing>>
Edited post (correction below)
Sorry for the wrong info on flashing your 32B device, I did not notice that your device was not a 32A sapphire but the 32B instead!
I think the answer you're looking for is here:
[ROM][WIP] United ICS - http://forum.xda-developers.com/showthread.php?t=1647493
"kernel -
ezterry's kernel + ics patches and some performance tweaks (enabled 710mhz overclock and other things) http://www.mediafire.com/?py8asp6ab109dyl
ezterry's ezgb 1.5.2 http://sandbox.devnull.name/android/ezgb-kernel/ezgb-2636-v1.5.2_S.zip "
<< info from tvall - http://forum.xda-developers.com/member.php?u=3038499 >>
lotherius said:
It's been years since I last flashed a MyTouch3G (32B)... Just got back one that I'd gifted away two years ago, it decided not to boot around Christmas and I brought it home to wipe/reflash.
Glad to see work still being done on this old device! It's ahead of my G2X in Roms.. That's effin sad.
Now if I can just remember how you flash a kernel on this thing....
EDIT:
I'm a bit confused about the kernel.... the thread linked doesn't actually seem to be any specific kernel??? More "how to flash a kernel safely" and hboot/radio files. I already have the required hboot/radio! So which kernel do I use??
EDIT 2:
N/m.... can't be assed to sit here all night trying to figure out which kernel to use on an antique phone. Went with Gingerbread instead.
Click to expand...
Click to collapse
You have to take a working 32B kernel, preferably a flashable zip. The link in the opening post isn't directing to a kernel, but search for it in the G1 section and you will find a lot kernels.
ICS is much faster, so I would suggest you try it.
Can you point me into the right direction? My dad has an old Magic 32B with Radio 27.08. What Kernel should i use? Or what ICS Version are you talking about?
Thanks in advance.
when is out the final version?