[Q] Mytouch 3g Brick - General Questions and Answers

hey, Im really stuck with this and im at my witts end and could really use some help. After numerous attempts at running cyanogen 6 on my phone it failed. Im not going to run through the entire process just to where Im at now. The phone boots into both fastboot and recovery, but the recovery is a rom that I had downloaded previously because I had no recovery (•recovery-RA-sapphire-v1.7.0G.img - MD5Sum: 8b3b5ff90575eba0c5bfc13c0fa6b8ea) is the rom that i downloaded. I am unable to successfuly flash any rom over and I cant load SAPPIMG.nbh from fastboot. also in fastboot my led light turns blue im only including this info because I read someone mention it in a forum. So can I get some help please

DeadlyArr0w said:
hey, Im really stuck with this and im at my witts end and could really use some help. After numerous attempts at running cyanogen 6 on my phone it failed. Im not going to run through the entire process just to where Im at now. The phone boots into both fastboot and recovery, but the recovery is a rom that I had downloaded previously because I had no recovery (•recovery-RA-sapphire-v1.7.0G.img - MD5Sum: 8b3b5ff90575eba0c5bfc13c0fa6b8ea) is the rom that i downloaded. I am unable to successfuly flash any rom over and I cant load SAPPIMG.nbh from fastboot. also in fastboot my led light turns blue im only including this info because I read someone mention it in a forum. So can I get some help please
Click to expand...
Click to collapse
What is your hboot and radio? if you can still boot into fastboot, then you can use fastboot to flash a recovery. Did you interrupt any process or flash a rado or spl/hboot?

UberMario said:
What is your hboot and radio? if you can still boot into fastboot, then you can use fastboot to flash a recovery. Did you interrupt any process or flash a rado or spl/hboot?
Click to expand...
Click to collapse
Hboot-1.33.006 (sapp30000)
CPLD-10
Radio-2.22.19.26i

DeadlyArr0w said:
Hboot-1.33.006 (sapp30000)
CPLD-10
Radio-2.22.19.26i
Click to expand...
Click to collapse
Just install the Android SDK (search XDA)
and do this in command prompt (Windows Instructions)
cd C:\< the android sdk folder name>\tools\
then follow the fastboot instructions

Related

HTC Magic keeps rebooting, unlike other posts, PLEASE HELP, thanks in advance! :):)

Hello All,
I've tried my hardest to search all over the forums but I still can't figure this out. I'm highlighting all I've tried to eliminate all that junk.
I have a 32A magic and I tried updating the ROM via this post.
I actually installed the radio 6.35.08.29 a little bit lower on the post using recovery mode while it was on my SD.
My device is rooted via theunlockr.com's one click rooting.
I think this was the problem because I was supposed to install the radio 6.35.10.18 because as soon as it was finished installing and rebooting, it keeps rebooting and doesn't even get past the splash screen
Here's where the issues start making me want to pull my hair out.
The good news (from what I'm hearing) is that I can still boot into fastboot and HBoot modes, but I can't get to restore mode at all
I'm getting better with the sdk so I'm understanding fastboot etc now but the main problem I believe is that it won't recognize my device.
I am on windows 7, but yes I've installed the latest drivers and device manager is recognizing it but when I try in cmnd to type adb devices it shows "List of devices attached" and it's emtpy.
I try to type something like adb bugreport and it comes back "error: device not found"
So clearly it doesn't seem to be recognizing the device.
What I was trying to do what push another radio to the device or something but at this point I have no idea what I am to do, especially since I can't get to restore!! Grr!
Any ideas?
p.s.
I thought I'd mention that I think this may be because I didn't (and cannot) select USB debugging from the menu as I can't load the device...
May be bricked... Oh well lol
update
It's only going into fastboot mode when plugged in now.
kob123 said:
It's only going into fastboot mode when plugged in now.
Click to expand...
Click to collapse
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery-RA-hero-v1.5.2.img
fastboot erase system -w
fastboot reboot-bootloader
make sure those files are in your tools folder
Thanks,
The files recovery-RA-hero-v1.5.2, Radio_HTC_PVT_32A_6.35.10.18, as well as hboot-1.76.2007 are all in the tools folder.
For fastboot flash radio:
I keep getting:
sending 'radio' ... okay
writing 'radio' ... INFOsignature checking...
FAILED (remote: signature verify fail)
Same thing happens for flashing hboot and recovery as well...
fastboot erase system -w
fastboot reboot-bootloader
both work fine.
Like I said, thanks HUGE so far, but still not working...
im also having the very same problem i cant even flash the sappimg or anything i dont even get the recovery
sapphier pvt 32b ship s-on h
hboot-1.33.0009 (sapp30000)
cpld-10
radio-3.22.20.17
thats all i get please help
ok i got it check it this is what i did i put the engineering-spl-hboot 1.33.2005on to sdcard and rename to update...
then turn on to recovery holding home n power...
then when the triangle picture pops up press home & end call buttons again just press it no need to hold....
once done updating place sappimg.zip on to sdcard...
power on to hboot ...
phonewill load zip file.....
let it do its thing again after done reboot and you got it!!!!!!
i had a card adapter sou will need on let me know if it helped you out....also i formatted my sdcard before i started because phone had problems mounting card when in recovery
http://forum.xda-developers.com/showthread.php?t=530527
download the update.zip
fastboot boot recovery-RA-sapphire-v1.5.2.img
(make sure you use sapphire unless you have the hero radio and spl installed otherwise the hero recovery is needed if you have the cursorsense radio which effectivly makes the magic a hero)
apply the update.zip
then you should be able to fastboot the prev instructions
just fyi make sure u check your radio on the fastboot screen before using the hero or sapphire recovery - make sure you use the proper one!
update
Hey all my problem was also with the spl as well for some reason. I also loaded the newest rogers update instead which the combination did the trick...
kob123 said:
Hey all my problem was also with the spl as well for some reason. I also loaded the newest rogers update instead which the combination did the trick...
Click to expand...
Click to collapse
yeaaa the spl is what my above tricck woulda fixed but if you loaded the latest rogers update you got no root access for now which kinda sucks

I might have bricked my Sensation. Please help.

I have a Sensation S that I was trying to install a custom rom onto. I messed it up a bit though. I unlocked it trough htcdev.com but never got S-off. I also didnt make a backup. So now I have this:
SAGA PVT SHIP S-ON RL
HBOOT2.02.0002
RADIO-3831.19.00.110
eMMC-boot
And I'm getting nowhere. I am not able to install any roms (they all get error messages or just doesn't work) and I'm not able to install a RUU. I have tried taking the recover image from several RUUs, flashed them and then installed the RUUs after I locked the bootloader. No luck there so far. Innstall gets errors halfway trough.
I really need to fix this and I've been trying for 4-5 hours now. I really hope anyone has some solution to this. Right now I would be very happy just to be able to use my phone again no matter the rom.
Sensation S? You mean Desire S, right?
Download: http://www.4ext.net/ddl/saga/recovery.zip
Unpack the image.
Boot your phone into fastboot mode.
Code:
fastboot flash recovery recovery.img
Leave fastboot mode, go to recovery.
What happens?
Aquous said:
Sensation S? You mean Desire S, right?
Unpack the image.
Boot your phone into fastboot mode.
Code:
fastboot flash recovery recovery.img
Leave fastboot mode, go to recovery.
What happens?
Click to expand...
Click to collapse
Well, naming is confusing here, but yeah. Desire S. Ive seen it called Sensation S alot as well.
When i do as you say I boot into 4Ext touch. Was already using the nontouch-version.
What now?
Pivotalia said:
Well, naming is confusing here, but yeah. Desire S. Ive seen it called Sensation S alot as well.
When i do as you say I boot into 4Ext touch. Was already using the nontouch-version.
What now?
Click to expand...
Click to collapse
Now you can flash a ROM
I recommend ViperSaga: http://forum.xda-developers.com/showthread.php?t=1983604
After flashing the ROM, open up the zip on your computer, extract the boot.img, and flash it via fastboot.
So:
1. Wipe data/factory reset from within recovery
2. Flash the ROM (you can use adb to push it to your sdcard even while you're in recovery; e.g. adb push rom.zip /emmc/)
3. When done, reboot; immediately after pressing 'reboot' in your recovery hold down VOL- or you'll be stuck on the white HTC screen and have to wait until the battery runs dry
4. Go to fastboot
5. Extract the boot.img from the rom zip on your computer
6.
Code:
fastboot flash boot boot.img
7. Done
Hi,
If it failed several times after RUU and it got stuck on the HTC Logo screen and bootloader is accessible then please try the solution in this thread
http://forum.xda-developers.com/showthread.php?t=1488672
Hope it might help and please leave feedback

Inspire 4g MAJOR Problem !

I am SO Freaking lost..... My problem is my phone will freez at the HTC splash screen, and the only things I can get into is bootloader and 4ext recovery. I can't flash any images they don't want to be flashed with the PD98img.zip I can't do anyting my phone is empty with no android os.. I am stuck. I can't seem to do much with fastboot with images either.
AlphaOmegaPrimus said:
I am SO Freaking lost..... My problem is my phone will freez at the HTC splash screen, and the only things I can get into is bootloader and 4ext recovery. I can't flash any images they don't want to be flashed with the PD98img.zip I can't do anyting my phone is empty with no android os.. I am stuck. I can't seem to do much with fastboot with images either.
Click to expand...
Click to collapse
can you give some background as what you did to get the phone into this state?
http://forum.xda-developers.com/showthread.php?t=1208507 I tried this to restore my phone thinking it would fix all my problems instead I must have messed something up, and now i'm pretty sure my phone is a paper weight. I managed to run fastboot oem rebootRUU and installed htc_inspire4g_att_RUU_3.20.502.52_US.exe but it hangs at white screen with HTC logo.
Did you try both flash packages?
Sent from my SAMSUNG-SGH-I527 using XDA Premium 4 mobile app
jzsidebott said:
Did you try both flash packages?
Sent from my SAMSUNG-SGH-I527 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm a NOOB, I have no idea what you mean by that. Sorry
AlphaOmegaPrimus said:
I'm a NOOB, I have no idea what you mean by that. Sorry
Click to expand...
Click to collapse
In the link you provided, on the first page, there were two seperate downloads, depending on when the phone was developed. "Download (restores to official Froyo 2.2.2) (315MB)" and also "Download (restores to official Gingerbread 2.3.3) (309MB)". Was just wondering which one you tried if any at all.
The only thing I can boot into is the 4ext Recovery Touch & hboot Can someone send me stock inspire 4g rom 4ext backup files they are *.tar files [email protected] Or [email protected]
Would that restore my system ?
the phone is
*** Unlocked ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0030
MICROP-0438
RADIO-26.17.14.11_M
eMMC-boot
If this helps
The 4ext Touch Recovery says under info
system ext3 549.2mb 504.9 free
data ext3 1.1gb 1.0 free
cache ext3 140.4mb 127.6 free
sdcard fat32 1.9gb 1.9 free
http://forum.xda-developers.com/showthread.php?t=1208507
4.Reboot to HBOOT: Shutdown completely (disconnect USB if connected and pull battery if necessary) then while holding down the VOL-DOWN key, press the POWER key for about half a second. The phone should boot into HBOOT, check the PD98IMG.zip for consistency, then prompt you to install. Select VOL-UP to install.
5.Once installed, HBOOT will prompt you to reboot by pressing the POWER button. Do this
I can get to step 4 and instead of flashing the PD98IMG.zip is says parsing and just goes back to hboot. I can't flash anything.
I have been making some MAJOR progress on my phone.. after messing around with a lot of fastboot commands, I found this with helped .. fastboot -c "lge.kcal=0|0|0|x" boot customrecovery.img if forces some images to boot.
Also the link I posted above only will work if my phone is relocked. I can't even make post in the Inspire 4G Android Development , because i'm "too new " to ask a question. But I managed to get his program to run again and I've noticed something. on step 7
7.Once successfully completed, the phone will automatically reboot to HBOOT and begin the process of installing the RUU. The only thing you have to do at this point is acknowledge the prompt to install by pressing VOL-UP. (Note: the RUU install may skip a couple of images during the install but this is normal.
IT FAILS to copy the RUU to the sdcard. and that's what has left my phone without an OS. I've also got the stock RUU htc_inspire4g_att_RUU_3.20.502.52_US.exe to run and complete But my phone hangs after the HTC logo..
So i'm headed in the right direction. Any ideas ???? ~ T
SO I've made a HUGE step in progress yesterday, I installed JellyTime rom and inspire mod and gapps. and forced the boot.img file to boot using fastboot -c "lge.kcal=0|0|0|x" boot boot.img it made the boot.img to run and start JellyTime. I've got android installed on the phone now. The only problem is I need to S-OFF so I can fastboot flash boot boot.img. It won't do it right now, As of now the phone will bootup and hang on the White HTC logo screen, Every attempt to S-OFF the phone has failed so far. Any Ideas ?
Your phone is bricked?
Try flashing this ROM
http://forum.xda-developers.com/showthread.php?t=996368
AlphaOmegaPrimus said:
SO I've made a HUGE step in progress yesterday, I installed JellyTime rom and inspire mod and gapps. and forced the boot.img file to boot using fastboot -c "lge.kcal=0|0|0|x" boot boot.img it made the boot.img to run and start JellyTime. I've got android installed on the phone now. The only problem is I need to S-OFF so I can fastboot flash boot boot.img. It won't do it right now, As of now the phone will bootup and hang on the White HTC logo screen, Every attempt to S-OFF the phone has failed so far. Any Ideas ?
Click to expand...
Click to collapse
You don't need S-Off to fastboot flash boot.img. Just an unlocked bootloader.
bayartiesto said:
Your phone is bricked?
Try flashing this ROM
http://forum.xda-developers.com/showthread.php?t=996368
Click to expand...
Click to collapse
This is not at all helpful. He is asking for boot.img or S-Off help. If he can't do that his ROM is irrelevant.
OMG. this is the worst place for help ever. I have Jelly time installed and I can get into it But only AFTER forcing the boot.img to boot. I CANNOT boot into jellytime by it's self normally. BECAUSE I cannot flash the boot.img file I get an error message. Because I need S-OFF to be off. right now it's on. Everything I've tried has failed.
AlphaOmegaPrimus said:
OMG. this is the worst place for help ever.
Click to expand...
Click to collapse
This is just about the worst way to start a post where you're asking for help.
AlphaOmegaPrimus said:
I have Jelly time installed and I can get into it But only AFTER forcing the boot.img to boot. I CANNOT boot into jellytime by it's self normally. BECAUSE I cannot flash the boot.img file I get an error message. Because I need S-OFF to be off. right now it's on. Everything I've tried has failed.
Click to expand...
Click to collapse
Did you even read what I wrote before??
bananagranola said:
You don't need S-Off to fastboot flash boot.img. Just an unlocked bootloader.
Click to expand...
Click to collapse
Also, you haven't told us what error message you get when you try to flash the boot.img. And is your bootloader unlocked??
AlphaOmegaPrimus said:
OMG. this is the worst place for help ever. I have Jelly time installed and I can get into it But only AFTER forcing the boot.img to boot. I CANNOT boot into jellytime by it's self normally. BECAUSE I cannot flash the boot.img file I get an error message. Because I need S-OFF to be off. right now it's on. Everything I've tried has failed.
Click to expand...
Click to collapse
What does forcing the boot.img means? there is no other way to flash a boot.img that in fastboot if you are S-ON. There is no need to be S-OFF to fastboot flash. In fact, having S-OFF is not enough to enable flash commands in fastboot (you actually need ENG S-OFF for that).
I suggest that you give detail information about the errors and what you are doing if you want to get helped.
Hello,
I have htc inspire. My phone was new sept 2011 and worked until july 2012. My phone was set to charge only and usb debug disable and was never rooted. One night I put the phone to charge and the next day it I turned it on but it never made past the white screen. I have tried to put the rom on sd card as PD98IMG. I tried RUU. The phone lists:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024 MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
Apr 12 2011,00:55:45
When I try using RUU it gets stuck on reloading bootloader
When I try the PD98IMG method using a goldcard, it gets stuck:
parsing...[SD ZIP]
[1] BOOTLOADER -UPDATING
[2] BOOT
[3] RECOVERY
etc
Please help
Not sure but What helped me get past the HTC logo screen is just recovering the old Stock of the phone.
The link provided is to return back to old stock AT&T Roms.
http://forum.xda-developers.com/showthread.php?t=1385016
Boot your phone in Bootloader mode (PWR + VOL DOWN).
Run the RUU Installer.
For S-Off, Advanced Hack Kit (AAHK) was quite a big help to me.
My problem is I have s-on. Phone freezes when I try pd98img on sd goldcard. I can connect with fastboot but I am not sure how to use it. The phone was in charge only & usb debug off when it use to work.
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024 MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
Apr 12 2011,00:55:45
Any help would be greatly appreciated

HTC Sensation stuck at htc screen

Hey Guys,
I post early the same topic but i didnt had my phone then, and now i have him.
Ok, my phone stuck at the htc screen and does not want to boot, i tried first the android 4.4 rom but without luck, then i tried android 4.2.2 with cm 10.1 (http://forum.xda-developers.com/showthread.php?t=2115520) and without luck. Here is my Hboot etc:
*** UNLOCKED ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34
I got ClockworkMod Recovery v5.8.0.9
I dont have the fastboot and adb files anymore on my pc!
Thanks already,
Friso Kort
Friso_HK said:
Hey Guys,
I post early the same topic but i didnt had my phone then, and now i have him.
Ok, my phone stuck at the htc screen and does not want to boot, i tried first the android 4.4 rom but without luck, then i tried android 4.2.2 with cm 10.1 (http://forum.xda-developers.com/showthread.php?t=2115520) and without luck. Here is my Hboot etc:
*** UNLOCKED ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34
I got ClockworkMod Recovery v5.8.0.9
I dont have the fastboot and adb files anymore on my pc!
Thanks already,
Friso Kort
Click to expand...
Click to collapse
since you are on S-ON you have to flash the boot.img of the rom via fastboot command
or flash 4ext recovery and enable smartflash from it before flashing the rom
as you understand in any case you need sdk tools(adb and fastboot) on your pc
Friso_HK said:
Hey Guys,
I post early the same topic but i didnt had my phone then, and now i have him.
Ok, my phone stuck at the htc screen and does not want to boot, i tried first the android 4.4 rom but without luck, then i tried android 4.2.2 with cm 10.1 (http://forum.xda-developers.com/showthread.php?t=2115520) and without luck. Here is my Hboot etc:
*** UNLOCKED ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34
I got ClockworkMod Recovery v5.8.0.9
I dont have the fastboot and adb files anymore on my pc!
Thanks already,
Friso Kort
Click to expand...
Click to collapse
You need to change your recovery to 4ext 1.0.0.6 RC 1
sent from HTC Sensation 4G
rzr86 said:
since you are on S-ON you have to flash the boot.img of the rom via fastboot command
or flash 4ext recovery and enable smartflash from it before flashing the rom
as you understand in any case you need sdk tools(adb and fastboot) on your pc
Click to expand...
Click to collapse
Do you now where i can download that?
Friso_HK said:
Do you now where i can download that?
Click to expand...
Click to collapse
4ext recovery or sdk tools?
rzr86 said:
4ext recovery or sdk tools?
Click to expand...
Click to collapse
I download Universal Naked Driver 0.72 but i dont now how it works, i need the driver for my htc sensation z710e
rzr86 said:
4ext recovery or sdk tools?
Click to expand...
Click to collapse
Forgot that question, i have fastboot and adb and i want to flash boot.img thats in my rom (or do i need 4ext?) but i need the driver of my htc sensation z710e, i have pdanet and universal naked drive 0.72 but i do it in fastboot usb.
Friso_HK said:
Forgot that question, i have fastboot and adb and i want to flash boot.img thats in my rom (or do i need 4ext?) but i need the driver of my htc sensation z710e, i have pdanet and universal naked drive 0.72 but i do it in fastboot usb.
Click to expand...
Click to collapse
HTC Sync.
nlooooo said:
HTC Sync.
Click to expand...
Click to collapse
I do i form fastboot usb so can i then at htc sync?
Friso_HK said:
Forgot that question, i have fastboot and adb and i want to flash boot.img thats in my rom (or do i need 4ext?) but i need the driver of my htc sensation z710e, i have pdanet and universal naked drive 0.72 but i do it in fastboot usb.
Click to expand...
Click to collapse
put the boot.img in your adb and fastboot folder
open in that folder a cmd window and type
fastboot flash boot boot.img
for htc drivers see here
http://forum.xda-developers.com/showthread.php?t=2217396
rzr86 said:
put the boot.img in your adb and fastboot folder
open in that folder a cmd window and type
fastboot flash boot boot.img
for htc drivers see here
http://forum.xda-developers.com/showthread.php?t=2217396
Click to expand...
Click to collapse
i works i looooooooove youuuuuuuuuuuuuuuuu
What about those of us that have no USB connectivity, meaning when USB cable is connected, you get no "Fastboot USB" on the bootloader screen?
I'm S-on, so flashing recoveries from the SD card isn't possible.
Try this...
PoXFreak said:
What about those of us that have no USB connectivity, meaning when USB cable is connected, you get no "Fastboot USB" on the bootloader screen?
I'm S-on, so flashing recoveries from the SD card isn't possible.
Click to expand...
Click to collapse
Try following method 2 in this guide( through updating via PG58IMG.zip file) http://forum.xda-developers.com/showthread.php?t=1599816. Be carefule about the md5 checksum of the recovery image. Double check before flashing!!
After this, boot into recovery(from the bootloader menu, select appropriate superuser.zip file(for rooting, search xda ...there are many options) and flash root. You now have a custom recovery and are rooted. Now you can flash any custom rom.
All the above assuming you can somehow transfer files to your SD card through a card reader or any other means...
NOTE: Delete the PG58IMG.zip after flashing recovery.
ushmal said:
Try following method 2 in this guide( through updating via PG58IMG.zip file) http://forum.xda-developers.com/showthread.php?t=1599816. Be carefule about the md5 checksum of the recovery image. Double check before flashing!!
After this, boot into recovery(from the bootloader menu, select appropriate superuser.zip file(for rooting, search xda ...there are many options) and flash root. You now have a custom recovery and are rooted. Now you can flash any custom rom.
All the above assuming you can somehow transfer files to your SD card through a card reader or any other means...
NOTE: Delete the PG58IMG.zip after flashing recovery.
Click to expand...
Click to collapse
Still won't work. I have tried flashing stock firmwares, stock and non-stock recoveries, reflashing root.zip, restore from known good backups, nothing has worked. Phone is stuck at first HTC logo screen and will go no further, and with no USB connectivity, it's impossible for me to flash even PG58IMGs' because the phone is S-on.
Maybe this could work for you...just a suggestion
PoXFreak said:
Still won't work. I have tried flashing stock firmwares, stock and non-stock recoveries, reflashing root.zip, restore from known good backups, nothing has worked. Phone is stuck at first HTC logo screen and will go no further, and with no USB connectivity, it's impossible for me to flash even PG58IMGs' because the phone is S-on.
Click to expand...
Click to collapse
Ok, from your reply i gather that even though you transferred the PG581MG to your SD card, the phone did not update when your got to the bootloader menu. I do not think being S-ON will prevent you from installing from the zip file...but maybe i am wrong. Hey now all i can think is this:
Turn off your phone, remove the battery, wait for some time(~10seconds), then put the battery back in. Now press Power +Vol down switch together. Now at the boot loader menu select Fastboot and press Power button. Connect your phone to your PC now and wait. The check if the next screen shows 'FASTBOOT USB'.
If you get 'FASTBOOT USB' in the next screen, then you have multiple options, but for you i would suggest that you download the latest RUU for the phone depending on your region and cid. Then run the ruu while the device is still in FASTBOOT USB mode. This will restore your phone's firmware recovery and rom back to stock.
But if your phone does not show fastboot usb then i'm stumped dude...maybe the experts here in our sensation community will be able to help out....
All the best ...and report if anything improves...

[Q] HTC One Mini not booting up fully and no access to recovery

Hello,
My phone was updating and crashed. The phone turns on but only the HTC logo appears and then goes to a black screen. I can't fastboot into the device as it is not recognised. I can't access TWRP recovery any more and goes to a downloading screen and then restarts again. While in the bootloader the phone shows the following:
***TAMPERED***
*** RELOCKED***
M4_UL PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.19.0000
RADIO-1.22.40e.00.07
OpenDSP-v19.2.0268.0927
OS-1.31.401.1
eMMC-boot 1024MB
Aug 7 2013, 17:37:54.0
Please help me, any help greatly appreciated!
Update:
The phone is working and has an update but it can not update on the device, is there a way i can get the downloaded OTA file on to my PC?
CoolAndroid1 said:
Hello,
My phone was updating and crashed. The phone turns on but only the HTC logo appears and then goes to a black screen. I can't fastboot into the device as it is not recognised. I can't access TWRP recovery any more and goes to a downloading screen and then restarts again. While in the bootloader the phone shows the following:
***TAMPERED***
*** RELOCKED***
M4_UL PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.19.0000
RADIO-1.22.40e.00.07
OpenDSP-v19.2.0268.0927
OS-1.31.401.1
eMMC-boot 1024MB
Aug 7 2013, 17:37:54.0
Please help me, any help greatly appreciated!
Click to expand...
Click to collapse
Hi,
What do you want to flash stock sense 6...??
greets
shivasrage said:
Hi,
What do you want to flash stock sense 6...??
greets
Click to expand...
Click to collapse
Hello,
Yes I would like to go back to Sense 6 or any stock firmware preferably 4.4.2
Thanks
CoolAndroid1 said:
Hello,
Yes I would like to go back to Sense 6 or any stock firmware preferably 4.4.2
Thanks
Click to expand...
Click to collapse
Ok
First I recommend you to unlock your bootloader.
So if you are in bootloader and your device is not recognised I think it´s a driver issue.
If you allready checked it check it once more or update your tools (ADB, fastboot)
If nothing helps you could go to recovery and format your device (not only wipe format) should be clear that all data on device is lost.
Try different recoverys some people report that philz also works fine on M_4. (try install new rom option on philz).
DONT flash stock sense 6 ROM (wrong partition layout for this hboot) with this hboot rather take 5.5.
I´m sorry but without get connectet via ADB or fastboot I think there is no chance to get it working again.
greets
shivasrage said:
Ok
So if you are in bootloader and your device is not recognised I think it´s a driver issue.
If you allready checked it check it once more or update your tools (ADB, fastboot)
If nothing helps you could go to recovery and format your device (not only wipe format) should be clear that all data on device is lost.
Try different recoverys some people report that philz also works fine on M_4. (try install new rom option on philz).
DONT flash stock sense 6 ROM (wrong partition layout for this hboot) with this hboot rather take 5.5.
With out get connectet via ADB or fastboot I think there is no chance to get it working again.
greets
Click to expand...
Click to collapse
I can not access recovery to wipe anything out, on bootloader if i choose to wipe it attempts to load recovery which goes into download mode. The device comes up as "Device failed emulation" on Windows 8
CoolAndroid1 said:
I can not access recovery to wipe anything out, on bootloader if i choose to wipe it attempts to load recovery which goes into download mode. The device comes up as "Device failed emulation" on Windows 8
Click to expand...
Click to collapse
Ok
I tell you in short terms:
If you can´t get a fastboot connection to your device it looks very bad to bring your device back.
For wiping something you need recovery for flashing new recovery you need fastboot.
For flashing a new firmware to fix messed up partitions you need fastboot.
And first of all to unlock your bootloader you need fastboot.
You see all ends up with fastboot.
As what the device is shown in the manager of windows?
Better to use Windows 7 there are much driver problems people reporting on win 8
greets
Ok, I will use a win 7 pc and let you know
shivasrage said:
Ok
I tell you in short terms:
If you can´t get a fastboot connection to your device it looks very bad to bring your device back.
For wiping something you need recovery for flashing new recovery you need fastboot.
For flashing a new firmware to fix messed up partitions you need fastboot.
And first of all to unlock your bootloader you need fastboot.
You see all ends up with fastboot.
As what the device is shown in the manager of windows?
Better to use Windows 7 there are much driver problems people reporting on win 8
greets
Click to expand...
Click to collapse
After i fix my drivers issue what can i do afterwards?
shivasrage said:
Ok
I tell you in short terms:
If you can´t get a fastboot connection to your device it looks very bad to bring your device back.
For wiping something you need recovery for flashing new recovery you need fastboot.
For flashing a new firmware to fix messed up partitions you need fastboot.
And first of all to unlock your bootloader you need fastboot.
You see all ends up with fastboot.
As what the device is shown in the manager of windows?
Better to use Windows 7 there are much driver problems people reporting on win 8
greets
Click to expand...
Click to collapse
I can now do the fastboot command from CMD
CoolAndroid1 said:
After i fix my drivers issue what can i do afterwards?
Click to expand...
Click to collapse
If you have a connection via fastboot you first have to decide what ROM you want, search for the matching firmware.
for example flash the latest firmware for M_4... 4.09.401.3 from here (new partition layout for e.g. sense 6):
https://docs.google.com/file/d/0BzCFBBNdXagdcEMybkdBME5iUE0/edit
After that flash TWRP 2.7.1.1 or philz and format all you have to try one of this recoverys should work.
Next push or sideload a ROM via adb I recommend you one them:
http://forum.xda-developers.com/htc...-official-stock-sense-6-rom-firmware-t2817921
You can decide what you want rooted or not it doesn´t matter.
After installing with succsess try to reboot that´s it.
greets
I encountered a similar issue when playing around with returning my device to stock. I flashed stock recovery, then re-locked my bootloader. What is the downloading screen you're seeing? Is it the stock recovery screen?
To fix, i had to change CID back to stock (for me that was, CWS__001)
Unlock bootloader again, using HTC unlock.bin (unlock.bin wouldn't work when i was on super cid)
Flash custom recovery TWRP 2.6.3.0 (I'm not sure if 2.7.1.1 works with the old partition layout, so i used this version until i had upgraded to hboot 2.22, then I flashed 2.7.1.1. This may be an unnecessary step, but it always worked for me)
Once twrp was working again...
Flash stock hboot 2.22 found in the dev section
Flash TWRP 2.7.1.1 (again, might be an unnecessary step)
Boot to recovery
From TWRP, adb push the sense 6 rom i wanted to flash (IC 3.07 in my case)
After the push completed, flash ROM and reboot and all was good
As you can see, the steps i took require that fastboot and adb drivers work flawlessly, especially when pushing ROM to the device using abd.
If any of this seems unfamiliar, then don't do these steps. Again, this is just what i did when i flashed stock recovery and re-locked bootloader with a ROM that wouldn't boot.
jollywhitefoot said:
I encountered a similar issue when playing around with returning my device to stock. I flashed stock recovery, then re-locked my bootloader. What is the downloading screen you're seeing? Is it the stock recovery screen?
To fix, i had to change CID back to stock (for me that was, CWS__001)
Unlock bootloader again, using HTC unlock.bin (unlock.bin wouldn't work when i was on super cid)
Flash custom recovery TWRP 2.6.3.0 (I'm not sure if 2.7.1.1 works with the old partition layout, so i used this version until i had upgraded to hboot 2.22, then I flashed 2.7.1.1. This may be an unnecessary step, but it always worked for me)
Once twrp was working again...
Flash stock hboot 2.22 found in the dev section
Flash TWRP 2.7.1.1 (again, might be an unnecessary step)
Boot to recovery
From TWRP, adb push the sense 6 rom i wanted to flash (IC 3.07 in my case)
After the push completed, flash ROM and reboot and all was good
As you can see, the steps i took require that fastboot and adb drivers work flawlessly, especially when pushing ROM to the device using abd.
If any of this seems unfamiliar, then don't do these steps. Again, this is just what i did when i flashed stock recovery and re-locked bootloader with a ROM that wouldn't boot.
Click to expand...
Click to collapse
I cant unlock my bootloader as its relocked and fails, I cant install TWRP either
CoolAndroid1 said:
I cant unlock my bootloader as its relocked and fails, I cant install TWRP either
Click to expand...
Click to collapse
Did you get fastboot working yet? Does "fastboot devices" show your device? You can't do anything until fastboot works...but I imagine it worked at some point, since you unlocked and re-locked your device.
You can't install recovery because your bootloader is locked. And you can't unlock your bootloader until you change your CID back to whatever it was when you created the unlock.bin file on the HTC website.
Are you getting this error when you attempt to unlock?
FAILED (remote: unlock token check failed)
jollywhitefoot said:
Did you get fastboot working yet? Does "fastboot devices" show your device? You can't do anything until fastboot works...but I imagine it worked at some point, since you unlocked and re-locked your device.
You can't install recovery because your bootloader is locked. And you can't unlock your bootloader until you change your CID back to whatever it was when you created the unlock.bin file on the HTC website.
Are you getting this error when you attempt to unlock?
FAILED (remote: unlock token check failed)
Click to expand...
Click to collapse
Hello,
I did have the error code above but i used FUU to flash back to stock and all is fine now!!
CoolAndroid1 said:
Hello,
I did have the error code above but i used FUU to flash back to stock and all is fine now!!
Click to expand...
Click to collapse
Cool. Did you use fuu from here?
http://forum.xda-developers.com/showthread.php?t=2659109
jollywhitefoot said:
Cool. Did you use fuu from here?
http://forum.xda-developers.com/showthread.php?t=2659109
Click to expand...
Click to collapse
Yep! Windows 8 sucks with drivers and didn't work so had to switch to a different laptop!
CoolAndroid1 said:
Yep! Windows 8 sucks with drivers and didn't work so had to switch to a different laptop!
Click to expand...
Click to collapse
That's what i had to do when i first tried to root my phone. I was on Windows 7, but it was an old install and had all kinds of software on it that might have been preventing usb from working (iTunes, HTC Sync, some other random software, etc.) Sometimes, I would even have trouble connecting an external HD!
I ended up installing a clean copy of XP on an old computer that i now use strictly for flashing stuff to my phone.
New problem
I have 4.3 on my HTC now and have received an update for 4.4.2, however when I try this it goes a quarter of the way then comes up with a red triangle and exclamation point. The device is still rooted somehow. Can you help me update?
CoolAndroid1 said:
New problem
I have 4.3 on my HTC now and have received an update for 4.4.2, however when I try this it goes a quarter of the way then comes up with a red triangle and exclamation point. The device is still rooted somehow. Can you help me update?
Click to expand...
Click to collapse
I don't think OTA will work on unlocked/tampered device with custom recovery.I think you need to run ruu.exe if one is available for you to get 100% stock before OTA will work again.
jollywhitefoot said:
I don't think OTA will work on unlocked/tampered device with custom recovery.I think you need to run ruu.exe if one is available for you to get 100% stock before OTA will work again.
Click to expand...
Click to collapse
Hello,
I found an FUU for 4.4 Kitkat on the link you posted earlier, It does all the necessary actions with no failures and completes with a Congrats screen but the firmware is the same?

Categories

Resources