When I tried instal Angry Birds on My Galaxy S 2.2 froyo I've got a message-application not installed.I tried few times and always same message.Please help.
Try downloading the file again, it might be corrupted during downloading.
I was tried so many times.
Robin2 said:
Try downloading the file again, it might be corrupted during downloading.
Click to expand...
Click to collapse
I've back toandroid 2.1 and...Angry Birds installed fine.So must be something wrong with Froyo.Thanks.
uhhhhhhh
What Galaxy phone are you running with 2.2?
Android 2.2 (JP6). The game runs without any problems !
Samsung Galaxy S
I have the same problem with this Rom
JPM/JP6 "GoodBye RFS" ROM 0.2 (pre rooted, pre lagfixed)
With "official" JP6 I had no problem , only that after reboot the short cut in home screen was missing.
I think something wrong with sd card
sebakid said:
Samsung Galaxy S
Click to expand...
Click to collapse
HAHAHAHAH of course its a Samsung Galaxy S but which one......???
works great on my i9000M (bell) on 2.2
I have the same problem on my Droid 2. I tried installing it from the first market's site they put it on, on both my pc and the phone, and then again from AppBrain. It just won't install.
I had the same problem but already solved.
Unmount SD card and install the apk
Related
I have a Galaxy S 4G Rooted and Unlocked. I tried to install a special lock screen tweak, and all of the sudden upon booting, the Android System imemdiately force closes. The screen stays totally black after the T-Mobile splash screen and Galaxy S logo come up.
I've erased all my data, but what i really need to do is flash the phone (i think...)
What should i do?
Thanks.
danstheman7 said:
I have a Galaxy S 4G Rooted and Unlocked. I tried to install a special lock screen tweak, and all of the sudden upon booting, the Android System imemdiately force closes. The screen stays totally black after the T-Mobile splash screen and Galaxy S logo come up.
I've erased all my data, but what i really need to do is flash the phone (i think...)
What should i do?
Thanks.
Click to expand...
Click to collapse
If your phone appears to be bricked what you may have to do is flash your phone with one of the three or four Stock Roms that can be found on the DEV site. Check here to see how to use ODEN. For flashing Roms ODEN is the process that is being used on the SGS4G until CWM is working. There may be another way to fix your issue, but if you can get into download mode ODEN should work to get you back to working order. Just make sure you don’t check Partition when using ODEN.
danstheman7 said:
What should i do?
Thanks.
Click to expand...
Click to collapse
You are in luck!!! Check Here http://forum.xda-developers.com/showthread.php?t=1061093
Samsung just released an update using Kies Mini. It's just bug fixes, but it addresses your blank screen. Kies Mini Updates your system Over The Air (OTA). read up on it before you do it. It can be done with the data connection from your phone, but you may want to have a WiFi backup to download the ROM. You don't want it to get interupted during the download process.
nwpro3 said:
You are in luck!!! Check Here http://forum.xda-developers.com/showthread.php?t=1061093
Samsung just released an update using Kies Mini. It's just bug fixes, but it addresses your blank screen. Kies Mini Updates your system Over The Air (OTA). read up on it before you do it. It can be done with the data connection from your phone, but you may want to have a WiFi backup to download the ROM. You don't want it to get interupted during the download process.
Click to expand...
Click to collapse
I ended up using ODEN like you said, and installed 2.2.1 FROYO KC1.
Phone works fine now, thank you
Oh, and I tried clicking "Software Update" and it says "No Firmware"....
Maybe because i'm unlocked on AT&T?
danstheman7 said:
I ended up using ODEN like you said, and installed 2.2.1 FROYO KC1.
Phone works fine now, thank you
Oh, and I tried clicking "Software Update" and it says "No Firmware"....
Maybe because i'm unlocked on AT&T?
Click to expand...
Click to collapse
I don't think Kies recognizes the KC1 firmware since it was never an official release. Hopefully someone will get a firmware dump so that Whitehawk can give us a Deodexed version soon.
danstheman7 said:
I ended up using ODEN like you said, and installed 2.2.1 FROYO KC1.
Phone works fine now, thank you
Oh, and I tried clicking "Software Update" and it says "No Firmware"....
Maybe because i'm unlocked on AT&T?
Click to expand...
Click to collapse
Good to hear you got your phone back up and working. Whether you use KC1 or the new KD1 that was just released won’t make all that much difference. When you clicked on Update Software it is looking for the Over The Air Update firmware. That update is selectively distributed to phones from TMO as the bandwidth allows. Your phone hasn’t received the OTA update yet. That is why you got the No Firmware message. The other way you can download the KD1 firmware is by using Keis Mini software from Samsung. I did that update last night and now have the KD1 Firmware. If you are on AT&T you would have to get the OTA update from them if you are on that network. That is if they decide to send it out.
Ah, great.
Well either way I removed the bloatware apps on my phone with TitaniumBackup, so no OTA for me anyway, correct?
danstheman7 said:
Ah, great.
Well either way I removed the bloatware apps on my phone with TitaniumBackup, so no OTA for me anyway, correct?
Click to expand...
Click to collapse
Tmo is in the process of scheduling OTA updates. If you are on ATT, the update will have to come from them if they are sending them out. You can also use the Kies Mini application to get the KD1 update from Samsung Here Check the OP. There is also a Deodexed version On the Dev page. http://forum.xda-developers.com/showthread.php?t=1063696. Note: The Deodexed version needs to be flashed using ODEN or Heimdall.
Yeah just follow the steps in this guide http://forum.xda-developers.com/showthread.php?t=1001759
to flash the deodexed rom in the post above me.
Hey guys, ive got this device http://www.dhgate.com/p_ff808081302a1f95013031661a3c70a1.html anything I have tried to install on it does not work. Any advice on how I can fix this? It also looks like theyve loaded the Samsung Galaxy tablet's firmware onto this tablet. Thanks.
saa044 said:
Hey guys, ive got this device http://www.dhgate.com/p_ff808081302a1f95013031661a3c70a1.html anything I have tried to install on it does not work. Any advice on how I can fix this? It also looks like theyve loaded the Samsung Galaxy tablet's firmware onto this tablet. Thanks.
Click to expand...
Click to collapse
I don't know why. You said that "It also looks like they've loaded the Samsung Galaxy tablet's firmware onto this tablet." This is not true. If this was done, then it would have been bricked. Have you tried checking for an update?
theonew said:
I don't know why. You said that "It also looks like they've loaded the Samsung Galaxy tablet's firmware onto this tablet." This is not true. If this was done, then it would have been bricked. Have you tried checking for an update?
Click to expand...
Click to collapse
Well why I say it looks like the Galaxy Tab's firmware is because its got cell functions in it, and this tablet can not take a sim card. And its got Samsung Galaxy tab hardware, but I dont know. About the rom, I would actually look for a downgrade instead, Android 2.2, I prefer that over 2.3 as some of my apps does not work on 2.3
Is the latest system, really good
Is the latest system, really good
Yes very goog system, everything works now. I wanted to enable something under settings (cant remember now) and required my gmail login, logged in, took me directly to market and everything installs now. I see now when I install something it only installs to the usb internal storige, and my sd card is under a tf card directory on usb storage, so not sure how to fix that part yet, but will figure something out soon hopefully.
Now the system is not a 3.0 it?
Now the system is not a 3.0 it?
This is the latest system, good
This is the latest system, good
Систематическое сравнение 2,3 и 2,2 балла, что l
Систематическое сравнение 2,3 и 2,2 балла, что лучше?
Nice screen
Nice screen
Hi everyone, this is my first post and I recently bought my first Android device (yes, yes, I'm a 100% noob). BTW, I also did the search (google and xda) for this problem, without results.
This is the story:
- I few weeks ago I bought my new Samsung Galaxy Tab wifi (p1010), with Android 2.2 Froyo, and it is not rooted or flashed with some rom.
- Search on the market for an official version of Skype, but no, at this time there was no one.
- Then, I find one on getjar, works ok, but only audio.
- A few days ago I uninstalled the getjar version an install another one, version 2.0.0.45-signed, from villanrom, announced with video support, but at the moment of accepted a video-call the application always fails and closed.
- After that, I uninstalled it, and wait for a new and better one.
- Here is the problem: I have tried with another versions (villanrom 2.0.0.47sig, xda-Froyo-droidrx, the first one from getjar, and others, even the "official one" 2.0.0.47 from the market) but always I got the same error "Out of space: Skype could not be installed. Free up space and try again"
- I can instal other apps (apk and market) without any problem.
- My Summary is: Program 438MB/1.87GB, Personal data 10.00MB/69.77MB, Internal memory 4.38GB/12.74GB", with NO External SD card.
Please, I need some help to resolve this problem, before doing anything drastic, like an hard-reset
Best regards and thanks
Jerome
[note. sorry for my regular english... ]
Please. I need some expert help with this problem.
Best regards
Jerome
You can try to run Titanium Backup, to see whether there still is some kind of skype installation on your tablet. If Titanium Backup can find something, then try to uninstall/wipe data/force remove app (all in Titanium Backup).
Another thing u could try is to use Root Explorer, and browse to data/app/ and see if there is still some skype in there (com.skype.raider-1.apk?). If there is, delete it. Also go to data/data/ and see if there is still something from skype there (perhaps com.skype.raider?). If there is, delete it.
Finally you could try to clear your dalvik cache. Usually that's done in clockworkmod, but as I'm not sure if you have that on your tablet, check here.
If none of that helps, I would backup some important stuff and then do a factory reset. Or better yet, put a nice new rom on there (either official or unofficial, no idea what's out there for the galaxy tab). At least go to gingerbread (android 2.3.x), or honeycomb (android 3.x) if that's available for your tab.
good luck!
PS; as for skype, i would recommend to use droidrx's mod. He's making great progress and most likely very soon there will be some kind of "final" and bug-free version.
Many many thanks.
My tab it´s not rooted yet (I think if I do that then lose guaranty)... I will try to do a factory reset or firmware update first... Only if that fail, then I will apply the root solution... BTW, wich one it is the better method/app for root a g-tab (with the un-root option included)??
Best regards
Jerome
Just did a 5 minute research, and apparently for some people there is already an official gingerbread update available. I would rather do that then a factory reset at this point. Gingerbread is a much better version of android than you have at the moment.
Rooting your galaxy tab is dead easy apparently, read here.
If you're thinking about installing a custom rom, see the Galaxy tab android development section.
Yep, but the update it's not available for everyone... I got installed the lastest version of Kies (2.0.1.11053_99), and it's shows "Current fw version = Latest = PDA:KB4 / CSC:KB4 (CHO)".. May be because my country (Chile).
SuperOnceClick looks fine, but with this issue
Note:
I have tried unrooting the device and rooting it again and this is not working. so this is to let you know that you will have to reflash the firmware to root the device if you unroot it again using this software and try to root until some one finds a solution
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=812367
Thanks again, I hope that's Gingerbread will be available soon for me.
Best regards
Jerome
Yea, that means that you can still get your tablet back to the factory state (including root), in case you wanna bring it back for warranty. Which is probably never going to happen anyway.
So my advice would be just to flash a gingerbread 2.3.4 rom, as i've noticed you don't even need to have root to do this. Who knows how long chile will wait with distributing a new android version?
no te preocupes!
EDIT: just be careful with one thing, i've noticed not all customs roms will work on your tablet since you have a wifi only tablet. keep that in mind when looking for a rom and make sure that the rom will be compatible.
Apparently I'm not the only one with this specific problem... It's look like some bad install/uninstall process with the "VillainRom" version on the GTab.
Google search:
villainrom Skype with Video Support for Various Devices... #55
(Sorry, but the system says that I'm too noob to publish external links.. )
Sadly, they have not released a solution yet
Best regards
Jerome
EDIT: Searching a little bit more, find this:
http://forum.xda-developers.com/showthread.php?t=857334
http://forum.xda-developers.com/showthread.php?t=1156569#15398287
OK, I´m not the first one with this specific problem, but some says even with root they can´t delete skype directory from system.
Jerome
Solution:
Run terminal and type:
"rm_-R_/data/data/ com.skype.raider" _ = space
i failed the oparation a few times until i got it..
After that i'v downloaded Skype again, but this time it installed successfully,
Im very disappointed with Skype team failing to fix the problem and having there paying customers to Root there devices !
Jerome,
I guess you are in the same boat i am.
I went to Chile in June and bought a P1010 at Falabella store. My FW is the same as yours and there's no ROM to upgrade (official or custom).
There's no development for it here. Also the video skype is for the GB not froyo.
The only tweaks i could do was the root (z4root) and the OCLF.
Sorry for this bad news... But at least i loved to visit your country. The Piscosawer, the "CONGRO" fish and the "Cafe con Piernas" 8))
{}s
CreativeBR
Jerome_xda said:
Yep, but the update it's not available for everyone... I got installed the lastest version of Kies (2.0.1.11053_99), and it's shows "Current fw version = Latest = PDA:KB4 / CSC:KB4 (CHO)".. May be because my country (Chile).
SuperOnceClick looks fine, but with this issue
http://forum.xda-developers.com/showthread.php?t=812367
Thanks again, I hope that's Gingerbread will be available soon for me.
Best regards
Jerome
Click to expand...
Click to collapse
Well, i just updated my tablet GT P5113 TSYXAR with 4.2.2 android version and my tablet become a zombie (lol), i cant turn it off ... the tablet start all over again after "shut it down" ...
1) How can i fix it? Anyone got the same problem?
2) How recover back the original rom?
Thanks...
be_quick said:
Well, i just updated my tablet GT P5113 TSYXAR with 4.2.2 android version and my tablet become a zombie (lol), i cant turn it off ... the tablet start all over again after "shut it down" ...
1) How can i fix it? Anyone got the same problem?
2) How recover back the original rom?
Thanks...
Click to expand...
Click to collapse
I updated my 5113 and it did the exact same thing. It worked but I could never turn it off (always restarted). I tried everything I could think of; hard reboot, reset..etc
I finally gave up and rooted my device and installed CyanogenMod 10.1.3 (5110) and I am back up and running. I know that doesn't give you an easy fix but this is what I ended doing. Its not the same as the factory ROM but at least I could use my tablet.
adamff said:
I updated my 5113 and it did the exact same thing. It worked but I could never turn it off (always restarted). I tried everything I could think of; hard reboot, reset..etc
I finally gave up and rooted my device and installed CyanogenMod 10.1.3 (5110) and I am back up and running. I know that doesn't give you an easy fix but this is what I ended doing. Its not the same as the factory ROM but at least I could use my tablet.
Click to expand...
Click to collapse
Thats unbelieveble, i thought i was the only one with that stupid problem, i made a downgrade to 4.1.1 and work out ... unhappy as hell ... lol
As in the title states I have the galaxy tab 2 7.0 and recently I installed CWM and a ROM and everything looked like it went right however after I reloaded my tablet nothing seems different it jus seems to return to stock setting and now I cant do the OTA software update which means now certain apps and games I can no longer uses as it says my device isnt compatible. My goal was to simple update from Jellybean to at Least Kitkat.
Can someone help me. where did I go wrong?
Fleacore210 said:
As in the title states I have the galaxy tab 2 7.0 and recently I installed CWM and a ROM and everything looked like it went right however after I reloaded my tablet nothing seems different it jus seems to return to stock setting and now I cant do the OTA software update which means now certain apps and games I can no longer uses as it says my device isnt compatible. My goal was to simple update from Jellybean to at Least Kitkat.
Can someone help me. where did I go wrong?
Click to expand...
Click to collapse
Go to sammobile and flash the latest stock firmware for your device .
Newyork! said:
Go to sammobile and flash the latest stock firmware for your device .
Click to expand...
Click to collapse
Well after a short research I found a ROM called Resurrection Remix, loaded with 5.0.2 (or Lollipop) however now everything is force closing and I barely got my laptop to see it as MTP again after installing a new Binary (glad that did that trick for that) but I cant get it to boot into CWM Recovery bc I cant access the app the only thing it will let me do right now is change the Binary.
How can I fix this issue?
Edit: Okay so I got that solved with doing a factory reset twice, booted in CWM, loaded up the GApps. Now just wondering if there is away to make it not seen with phone options like the dialer or msgs as its jus a plan old tablet, doesnt take a sim card and has no carrier. I do have the source code but I am not tweaking that til I get a better understanding of it.
After a lot of research and tries (amazingly without bricking) I am now running an even newer version of a CM 13 Marshmellow