I can't access the two drives that show up under My Computer when I plug in my captivate. I've one click rooted and Device Manager has:
Disk Drives:
Samsung SGH-I897 Card USB
Samsung SGH-I897 USB
Modems:
Samsung Andoird USB Modem
Portable Devices:
G:\
H:\
USB Controllers:
Samsung Android USB Composite Device
Am I supposed to have access to these drives?
Thanks,
JOe K.
You need to mount the drives, slide the top tray (notification area) down and you will see an option to mount the drives. do the same to unmount before disconnecting. Also make sure usb options are set to mass storage under settings->applications->usb
Should USB debugging be on?
JOe K. said:
Should USB debugging be on?
Click to expand...
Click to collapse
it doesnt matter. mount the drives as indicated
Sweet, I got it rolling (Cog2.2B6). Thanks!
Related
Hello,
I know USB mass storage is disable in ICS.
But how to do to use USB mass storage on galaxy tab 2 ?
Not about MTP.
Thanks
philippe734 said:
Hello,
I know USB mass storage is disable in ICS.
But how to do to use USB mass storage on galaxy tab 2 ?
Thanks
Click to expand...
Click to collapse
I just plug usb end in to my pc running windows 7 and it auto detects, if that is what your asking! You might have to get the usb drivers from samsung site or google it.
philippe734 said:
Hello,
I know USB mass storage is disable in ICS.
But how to do to use USB mass storage on galaxy tab 2 ?
Thanks
Click to expand...
Click to collapse
When I plug my tab it, I get a "Connected as a Media Device" (or something along those lines) and my computer will automatically open/view the files on my tablet. If this doesn't happen, you can download Kies (software from Samsung to help install drivers and sync media) and that might help you.
Kies link: http://www.samsung.com/us/kies/
USB mass storage mode is being phased out, if your in windows this is not a problem as the default "media transfer protocol" will work just the same for transferring files (albeit only one transfer at a time)but if you really must have USB mass storage, google is your friend.
usb working in ics
If you are asking for USB storage in tab then you should download nexus media importer from web.....
Your USB drive also should be on Fat32 format. Or tab will not know that USB drive is connected....
I know MTP is working, but my question concern the UMS (USB mass storage) protocol. After searching long time on internet, apparently, UMS will never work on tab under stock rom. Thanks but no solution.
Hi guys, I am trying to recover deleted sms's and photos on my Samsung S2, using Tenorshare Android Data Recovery software on my laptop. The problem is that you have to connect to your pc via usb cable through the USB storage in settings with USB Debugging switched on. This I find is impossible, when you connect to your pc via the usb storage and then tick the box to turn on debugging, it tells you, you have to remove the usb cable, and of course, then you loose your usb storage connection. And if you try to connect doing the reverse you are also called to remove the cable. So you can only connect to the pc with the usb debugging switched on when your are connected in MTP mode. some urgent help please
paulhark said:
Hi guys, I am trying to recover deleted sms's and photos on my Samsung S2, using Tenorshare Android Data Recovery software on my laptop. The problem is that you have to connect to your pc via usb cable through the USB storage in settings with USB Debugging switched on. This I find is impossible, when you connect to your pc via the usb storage and then tick the box to turn on debugging, it tells you, you have to remove the usb cable, and of course, then you loose your usb storage connection. And if you try to connect doing the reverse you are also called to remove the cable. So you can only connect to the pc with the usb debugging switched on when your are connected in MTP mode. some urgent help please
Click to expand...
Click to collapse
i dont quite understand your problem but you tick usb debugging then connect it to your pc.
Trozzul said:
i dont quite understand your problem but you tick usb debugging then connect it to your pc.
Click to expand...
Click to collapse
Thanks for your reply, if you tick usb debugging and then go and click on usb storage to connect to pc it tells you to remove cable, when you do this to connect the usb storage it un ticks the debugging mode.
paulhark said:
Thanks for your reply, if you tick usb debugging and then go and click on usb storage to connect to pc it tells you to remove cable, when you do this to connect the usb storage it un ticks the debugging mode.
Click to expand...
Click to collapse
You are saying "go and click on USB storage". I didn't get where you are trying to click.
Wherever it is, that's not needed. When you are at MTP, go and tick USB debugging and then plug in USB.Thats it.
You don't need to do anything else, your device is already connected to pc with USB debugging on....
Hi,
I have the OTA update 59 applied, unlocked bootloader and rooted. USB debugging is enabled. When I connect the Shield to my PC through USB, I cannot select another mode than MTP (the setting is greyed out). Is there a way to activate USB mass storage currently?
Cheers!
try this
Try this:
http://www.wugfresh.com/faq/how-do-...-4-2-the-developer-options-menu-item-is-gone/
This should bring up developer menu
rbdhack said:
Try this:
http://www.wugfresh.com/faq/how-do-...-4-2-the-developer-options-menu-item-is-gone/
This should bring up developer menu
Click to expand...
Click to collapse
Please read carefully my question, what I'm after is "USB mass storage" not "USB debugging", which as I stated, is already turned on.
Nikojiro said:
Hi,
I have the OTA update 59 applied, unlocked bootloader and rooted. USB debugging is enabled. When I connect the Shield to my PC through USB, I cannot select another mode than MTP (the setting is greyed out). Is there a way to activate USB mass storage currently?
Cheers!
Click to expand...
Click to collapse
Try this
https://play.google.com/store/apps/details?id=com.mohammadag.samsungusbmassstorageenabler
Do not try to do mass storage with the built in storage. Long story but it will cause more headaches than it's worth it, this is the sd media only.
When I was connecting my sgt2 p3110 to the PC on win 7, it was instantly shown as removable disk. On Mokee based on cm 10.2, it doesn't. How can I connect it as USB mass storage again?
usb debugging enabled?
Android-Andi said:
usb debugging enabled?
Click to expand...
Click to collapse
No, disabled
what happens if you enable it and connect to pc?
Could anyone help me?
I can not transfer files from my computer to the Micro SD of LG G Flex 2 through a USB cable. The transfer begins but halfway to appears the message: "device has been disconnected." I have android 5.1.1.
Try a different USB cable or a different USB port on your computer.
Tikerz said:
Try a different USB cable or a different USB port on your computer.
Click to expand...
Click to collapse
Didn't work...
Me too
I have not been able to do this either. MTP IS enabled and everything, but my device won't mount on my computer.