Related
So I waited for the GB update and I like it but I think it is time to root this phone. I want to stress that I have had this phone since a little bit after it came out about two weeks after and it has run like a champ from day 1. No problems at all so when I updated to gb it was actually a downgrade in some ways like the camera but I definitly like gb because of the text editing but I havent noticed any improvement in battery life or speed or signal or GPS but All thouse things were great before and they are great now.
So I am running GB 2.3.3 withthe july 15 baseband and kernel 2.6.32.9 and I know it is different to root but I dont fully uinderstand it so if someone can post a detailed guide with as much explanation as possible so I understand what I am doing I would greatly appriciate it. I assume you cant get NV flasher from the market (I Havent looked) and what is cwm or cmw and if I flash a new rom will I loose the new baseband? Or can I get root permissions and keep stock GB? Tahnk you for all your help
First read the sticky at the top of the Android Development page. That sticky basically explains everything you will need to know, step by step.
In summary though....
Step 1 - NVFlash (http://forum.xda-developers.com/showthread.php?t=1056847)
Step 2 - Download Xboarders Rooted OTA.zip (http://forum.xda-developers.com/showthread.php?t=1179748)
Step 3 - Boot into Clockwork Recovery
Step 4 - Install Zip from SD Card - the Zip you downloaded above
Voila you have rooted GB 2.3.3 with new baseband.
An alternative that I would suggest would be Eaglesblood 1.06 GB 2.3.3 though, smoothest ROM on the boards IMO and based on GB 2.3.3
jabhome said:
An alternative that I would suggest would be Eaglesblood 1.06 GB 2.3.3 though, smoothest ROM on the boards IMO and based on GB 2.3.3
Click to expand...
Click to collapse
I've tried both Roms and I would have to sway that Xboarder's Tweaked Rom is the best GB update 2.3.3 Rom.
pdxmatts said:
I've tried both Roms and I would have to sway that Xboarder's Tweaked Rom is the best GB update 2.3.3 Rom.
Click to expand...
Click to collapse
Did not try Xboarders tweaked, maybe I will give it a try.
Does swype work on that rom as phone just took a dump with swype beta. First reboot in over two months just now.
Sent from my LG-P999 using Tapatalk
Follow the advice above. I flashed a rom for the first time today.
Does the Netflix app work on xboarder's rom? I'm having issues with HDMI on CM7 going out about every 5 minutes but coming right back. I really need the netflix app for travel.
+1 on xboarders. Runs smooth and has all of the stock features
Sent from my LG-P999
thanks guys that was what I thought. So it really is that easy? What actually gives it the root? is it the xboarders rom? I am going to ask alot of questions because I want to understand how it actually works so please bear with me. It sounds like it actually got easir to root with this update no? It seems like NVflash is a app or program that lets me put the rom on my sim card should I go internal or external? I have a whole bunch of external cards with diffewrent capacitys and the one i use now is 16 gig. Then clockwork recovery is a program that is already on the dvice I dont know if it is part of android or what but it is alrady there right? It lets me choose wether I want to recover or make a backup of roms or install new ones correct? Then when I put the tweeked rom on it has something in it hat roots the phone magically.
Please let me know what I am right about and what I am not right about and give me the correct answers because I really want to know I am a nosey motherfer
Charlie
So According to the thread in this forum titles "how to get the new baseband" the rooted version of the new rom does not contain the new baseband. Or is that the leaked gingerbread that came out a few months ago way before the update came out? He is not talking about xboarders rom right? If I do what was suggested here I will in fact have the new baseband and 2.3.3 rooted right?
Charlie
correct
mojorisin7178 said:
So According to the thread in this forum titles "how to get the new baseband" the rooted version of the new rom does not contain the new baseband. Or is that the leaked gingerbread that came out a few months ago way before the update came out? He is not talking about xboarders rom right? If I do what was suggested here I will in fact have the new baseband and 2.3.3 rooted right?
Charlie
Click to expand...
Click to collapse
If you have the new baseband now no roms will change that.
The roms do not include the baseband .
mojorisin7178 said:
thanks guys that was what I thought. So it really is that easy? What actually gives it the root? is it the xboarders rom? I am going to ask alot of questions because I want to understand how it actually works so please bear with me. It sounds like it actually got easir to root with this update no? It seems like NVflash is a app or program that lets me put the rom on my sim card should I go internal or external? I have a whole bunch of external cards with diffewrent capacitys and the one i use now is 16 gig. Then clockwork recovery is a program that is already on the dvice I dont know if it is part of android or what but it is alrady there right? It lets me choose wether I want to recover or make a backup of roms or install new ones correct? Then when I put the tweeked rom on it has something in it hat roots the phone magically.
Please let me know what I am right about and what I am not right about and give me the correct answers because I really want to know I am a nosey motherfer
Charlie
Click to expand...
Click to collapse
I flash from my external SD Card. You just need to decide where you want to install from, and then make sure you set up NVFlash with the correct support, external or internal.
Not sure of the exact terminology, but I think the procedure itself would be called to NVFlash ClockworkMod. NVFlash is the procedure to install CWM, while CWM is the program that you will run via Volume Down + Power when you boot up. CWM 4.0.0.2 will boot up and from there you will be able to flash roms, backup and restore Nandroids.
Ah that makes sense Now I see CWM stands for Clock work mod. See I was thinking CWM is a rom I actually thought it stood for cyogen mod I just couldnt figure out the W. So when I flash CWM it contains the root permissions already is that how it works?
So I should use nvflash to install cwm then I should probally make a backup of my stock rom. Also If I just install or flash CWM and not flash a new rom then Will my phone be rooted stock? or do I have to flash the xborders rom to gain root?
Thanks alot guys
Charlie
mojorisin7178 said:
Ah that makes sense Now I see CWM stands for Clock work mod. See I was thinking CWM is a rom I actually thought it stood for cyogen mod I just couldnt figure out the W. So when I flash CWM it contains the root permissions already is that how it works?
So I should use nvflash to install cwm then I should probally make a backup of my stock rom. Also If I just install or flash CWM and not flash a new rom then Will my phone be rooted stock? or do I have to flash the xborders rom to gain root?
Thanks alot guys
Charlie
Click to expand...
Click to collapse
CWM doesn't "contain" root permissions, it just allows you to flash any ROM into the phone, rooted or otherwise. The Xboarder ROM is pre-rooted, along with most of the others.
THANK YOU!
I too am a noob and was a little confused. I'd search the forums and come up with too much info. Plus, some terms used on this forum are slightly overloaded (in the C++ context) from the classic meanings, like "ROM" and "baseband". Those terms as used here do not mean exactly what they meant 20 years ago.
I'm sure I need to read more on app dev (but I have too many hobbies already), but I'm confused about the layers of s/w. As a noob, I would think the layers would be BIOS or maybe BSP, Linux, Android. So I don't understand:
1) where does the clockwork mod fit within the layers?
1a) nvdia nvflash installs new drivers in the Linux layer?
2) what is contained in the ROM image? A new version of Linux, andriod, nvdia drivers, baseband?
3) Is there a BIOS/BSP, or is all register access done in Linux drivers?
I'm not looking for a developers level answer to these questions, more of the readers digest version of the answers.
Since I'm having black screen of death (I believe referred to here as "SOD"), on two phones, I'd like to understand more, to figure out if this problem is h/w or s/w. I am definitely leaning towards s/w problems and my wife and I would love to keep these phones.
Thanks again.
-Bob
mojorisin7178 said:
Ah that makes sense Now I see CWM stands for Clock work mod. See I was thinking CWM is a rom I actually thought it stood for cyogen mod I just couldnt figure out the W. So when I flash CWM it contains the root permissions already is that how it works?
So I should use nvflash to install cwm then I should probally make a backup of my stock rom. Also If I just install or flash CWM and not flash a new rom then Will my phone be rooted stock? or do I have to flash the xborders rom to gain root?
Thanks alot guys
Charlie
Click to expand...
Click to collapse
Continuing off of what Spyvie said, you do need to flash xboarder's rom to gain root, (more like repeating what he said). As for nvflash, this should make things a bit easier. tgagunman made a nice one click feature that if you follow the directions, should be easier to follow. You will get clockwork mod recovery, it will be nvflashed, but it's a lot easier for a non-techie to use.
http://forum.xda-developers.com/showthread.php?t=1056847
I want to thank everyone who chimed in you guys have been really good to me Bob has some really good questions also and I hope this thread can help you out bob. That is why I started this thread for people like me who are really good with computers and like to mess around but don't quite understand phones. Every time something goes wrong with my PC I go to the forums and I fix it myself then I feel good. (And I have had some real disasters on my PC I have come back from)
Anyway I will be doing this procedure soon as I feel confident that I can do it and I see there is a fix for unbricking phones. One last question before I hit the green light: Can it be unrooted just in case I have to send it back for warantey issues and can CWM be uninstalled? I suspect that since the ROM is pre-rooted that all I would have to do is format and install my original ROM then uninstall CWM is that on point or no? And Again THANKS TO ALL WHO CHIME IN WITH THE ANSWERS AND I WOULD LIKE TO INVITE OTHERS TO CHIME IN WITH THERE QUESTIONS.
Charlie
Okay so I checked out the links. So I gather that step 1 has to be skipped now because super1click does not work. So we can just NVflash CWM which looks easy enough. Now I have winzip on my computer will that work for extracting .rar files? I am pretty sure it will but I want to make sure. And I am going to shut off user control permissions and I use MS security essentials for my Anti virus so I am thinking of shutting that off for this procedure would that be a wise thing and is there anything else that I should do. I am not a computer expert but I am not a idiot either I am just inexperienced. Thank you guys
Charlie
mojorisin7178 said:
Can it be unrooted just in case I have to send it back for warantey issues and can CWM be uninstalled?
Charlie
Click to expand...
Click to collapse
You can restore you Nandroid of the preroot OTA, or you can unroot with the unroot zip that Xboarder provided in his link.
mojorisin7178 said:
Okay so I checked out the links. So I gather that step 1 has to be skipped now because super1click does not work. So we can just NVflash CWM which looks easy enough. Now I have winzip on my computer will that work for extracting .rar files? I am pretty sure it will but I want to make sure. And I am going to shut off user control permissions and I use MS security essentials for my Anti virus so I am thinking of shutting that off for this procedure would that be a wise thing and is there anything else that I should do. I am not a computer expert but I am not a idiot either I am just inexperienced. Thank you guys
Charlie
Click to expand...
Click to collapse
no, there is nothing else you need to do to your computer. The link provided by the brother above (http://forum.xda-developers.com/showthread.php?t=1056847) is where you need to be. Skip the one click root and go straight to NV flash. It will guide you through installing the nvidia drivers you need. TGA_Gunnman has is laid out really nice and easy to follow and the program he put together (one click clm recovery nv flasher) is really simple to understand and use. he also has another post out there (http://forum.xda-developers.com/showthread.php?t=1060715) that is also helpfull. Once you get nv flash done make sure you copy the rom you want on your sd card. IMO Xboarders is very nice and smooth. You will hold down volume down and power together until you see the android screen. Then in the menu use vol keys to move to backup and restore and use power to select. Then move to yes and run the backup. then you can wipe data/factory restore. Then wipe cache. Then go to advanced and wipe dalvic and batt stats. Then go back to "choose zip from sd" and find your rom zip and select it. It will run for a while and tell you when its done, Then go to advanced again and fix permission. After that just go to reboot option and let it reboot. It may take a little longer the first time, just let it go. When it reboots you will have a rooted 2.3.3 with the new baseband you just updated to. After that go to the market and get Titanium Backup and run a backup of all your apps and data. From there your pretty much good to start flashing away. Have fun, Good luck
Guys,
Been reading all night so i appreciate your help and patience. I just picked up a charge (coming from thunderbolt - finally gave up) and am trying to root and flash some of the roms here.
I am very familar with adb and tried to root but it hung at gingerbreak. from what i understand in order to root, i need to downgrade my firmware to ed1. i am trying to figure out how to do this on a mac.
i downloaded heimdall which looked to be the right solution, but when i load the package in hemidall i get the following error: firmware.xml is missing from the package.
once i am rooted, do i have to use heimdall/odin or can we download zips to sdcard as with the thuderbolt?
also not finding a clear way to install cwm without odin either.
any help would be greatly appreciated.
sincerely
eric
The ADB method is completely wrong. We use custom kernels to root. They are included in all custom ROMs but if you want to just stay stock, flash them in Heimdall (I don't know how to use it, as I use a REAL computer). And most of the time you can just flash new roms in CWM, the only time you can't is when you upgrade GB-Froyo etc. Or when the developer says it's odin only. People have had luck emulating Windows within OS X and using odin from there.
Sent from my Droid Charge running GummyFroyo 1.9.1
Eric, the vast majority of users here use Odin for flashing. I have a Mac and a PC but have not used Heimdall simply because Odin was available, so I can't directly answer questions about Heimdall unfortunately (although I suppose I should learn about it eventually since I'd be able to use my laptop to flash).
There are multiple ways to get rooted, I guess the first question is where you want to end up? Were you looking at Froyo or Gingerbread based ROMs?
Please use the Q&A Forum for questions Thanks
Moving to Q&A
charlie_c said:
Eric, the vast majority of users here use Odin for flashing. I have a Mac and a PC but have not used Heimdall simply because Odin was available, so I can't directly answer questions about Heimdall unfortunately (although I suppose I should learn about it eventually since I'd be able to use my laptop to flash).
There are multiple ways to get rooted, I guess the first question is where you want to end up? Were you looking at Froyo or Gingerbread based ROMs?
Click to expand...
Click to collapse
I pulled out an old XP computer and was able to load a new kernal for root and get CWM installed. Now i have to figure out which ROM!
pnd4pnd said:
I pulled out an old XP computer and was able to load a new kernal for root and get CWM installed. Now i have to figure out which ROM!
Click to expand...
Click to collapse
Gummy 2.0 is gonna hit today!!! its gonna be the ultimate rom
anoninja118 said:
Gummy 2.0 is gonna hit today!!! its gonna be the ultimate rom
Click to expand...
Click to collapse
Agreed! At least until we see Cyanogen(which shouldn't be too long) so we can compare, I've never used Cyanogen before and I'm pretty interested to see what all the hype is about.
Heimdall doesn't work on the Charge
I know your pain, I am a fellow Mac owner. Mac's are sick computers, but I wont touch the portable products.
Anyhow, grab VMWare and get yourself some Windows XP. If you found yourself to XDA Forum, I asure you can figure those out.
One item to mention though, if you use the integrated version on VMWare, and you share files between the PC and mac, the file that you plan to flash with Odin must be in the PC area. You can unzip it on the mac, you can download it on the mac, but when it comes time for Odin, it must be on the PC.
I found this all out by trial and error.
Hey everyone. First of all, thank you very much for your help here if you're able!
Now, on to this:
I have a Droid 2 Global right now, rooted and running Fission ROM. (Recovery is ClockworkMod v5.0.2.3) Fission is, well, out of commission as it would seem, and I'm looking to upgrade to some Gingerbread.
Thing is, I haven't flashed more than one ROM onto this phone before and I'm coming from the HTC EVO 4G -- so I'm a little nervous about messing anything up as there was a much heavier amount of steps involved in rooting and flashing to this D2G than there was for the EVO!
Needless to say, I'm terrified of messing up. Here's my question:
1. If I load a new ROM onto my SD card, do a factory data reset, clear cache and dalvik, can I flash a new ROM from the recovery, no problems? Or would there be more steps needed?
2. This isn't as relevant I guess, but is it possible to unroot this phone safely and update to the VZW OTA Gingerbread? I'm probably not gonna worry about this if it's possible to just flash another ROM as asked in my first question, but it's worth noting.
Thank you guys so much, I've been super antsy with this phone lately. Any help is completely appreciated!
If you really want Gingerbread, with corresponding kernel patches and stuff, you have to update to VZW's latest firmware (4.5.608) as all modern Gingerbread ROMs use it as the base. They won't work on Froyo base.
The safest and cleanest way to get the phone to update is to flash an SBF image and then update to 4.5.x. Do note that this will clear any CDMA programming you probably have done to get it to work on Sprint Nextel. You'll need to reprogram the phone while still running 2.4.x.
Please also note that using custom ROMs is always a risk as there's always chance you'll need to flash an SBF to recover from a bad build, etc., so if to flash the phone to Sprint you need to contact Sprint themselves (i.e. you cannot do it yourself), this might turn into a real hassle.
Stock 4.5.608 is very stable and fast, especially with bloatware frozen.
Ah, sorry, I should have clarified further! It's on Verizon Wireless right now, so it's operating on Verizon still and has not been flashed to Sprint. (I had to go and change my provider logo -- if only I could have two!)
Also, thank you for your quick reply! I do have two more questions now, though;
1. If I flash another Froyo ROM, would I be able to do so in recovery off of the SD card? Rather, is it only Gingerbread that would need to be done with an SBF?
2. I was reading about SBFs earlier and was about to try the process, but I found that it was in .exe format. Would I need to be using a PC to do this? I have a Mac currently, though I would have access to a PC certainly if it were necessary (since it seems like this might be my best bet).
Regarding the OS question: there's sbf_flash utility available for both Linux and MacOS X. It's more easy to use, and is overall more “sturdy” (no problems with missing drivers leading to SBF process aborting in the middle).
Going through SBF is only required to update to Gingerbread (which is indeed highly recommended; Froyo ROMs are mostly outdated), because for that, you need a clean 2.4.330 system. If you can access ClockworkMod on your Froyo ROM, you definitely can install any Froyo-based custom ROM.
Thank you again. I think I will flash an SBF and update through VZW, it sounds like my best plan!
I'm searching to see if I can find the right SBF utility to download (for MacOS X), but I'm having a bit of trouble--do you happen to know where I can find it or have a link? In the meantime I will keep going through the forums!
http://blog.opticaldelusion.org/2011/04/universal-binaries-running-same.html
Hi everyone,
Noob here, looking for some phone specific info. After extensive research I have not found exactly what I'm looking for thus the reason for this post. Thanks in advance.
I'm looking for help finding the safest, simplest, most reliable way to root my 959v. I want to root so that I can a) delete preloaded browser bookmarks b) delete preloaded bloatware c) file share with my PC over WIFI (with Samba?) and d) block pop up ads (adfree). I need to be able to undo this in case of a warranty issue and I don't want to lose any of the function of the phone (i.e. front face camera, contacts sync, wifi).
Couple questions: Will factory reset take care of the bloatware and bookmarks?
Also, has anyone found a way to put a 4g toggle switch icon, like the power bar that comes with the phone, or do I need a new ROM to do this, and what does everyone recommend as for an O.S. / ROM. Thanks!
Firmware: 2.2.1
Kernel: 2.6.32.9
Build: FROYO.VUVKD1
i would suggest you flash ravers odin kj6 rom. then flash drhonks kj1 kernel with odin too in order to root it. both go in pda section. then flash through cwm soma's simplysimple rom wich is debloated or just use titanium backup to remove bloat from your rooted stock kj6.
I consider myself pretty technical but I don't completely understand Roms and kernels. By flashing a ROM, are you changing the OS and/or GUI? Does it overwrite the old OS or just make an amendment to it? Will any old Roms be left taking up useless space in memory? What about kernels? Thanks,,
Joe
Flashing a new rom is like re-installing windows on a PC. you need to backup your data before you flash.
The best way to root, is to either use ODIN to flash a new kernel that already had root (doesn't replace the whole rom), or use the latest superoneclick to root. Rooting does not erase your data. Then you can use a program like titanium backup to remove bloatware.
check out the dev form, and look for the bible thread, there are links to roms and guides on how to safely flash your phone. You are going to have to read up a bit to become familiar with how this phone works.
good luck.
Normally, I follow FB's ext4 guide.
But since my phone has been UnBrickable Modded, I've made a kj6 Back-To-Stock One-Click. This oneclick will basically get your phone to where it would be if you got your phone new with kj6 preloaded. RaverX3X tested for me, so I know it works well. After you run the one-click, odin kj1 from drhonk or extract the zImage and Heimdall it to KERNEL and RECOVERY partitions.
If you run the One-Click a second time, you will also get the right bootloaders for GB.
What if I have the KD1? What is all this KJ6/KJ1 about? Do I have to find and manually reinstall drivers for my device? Does a ROM need to be compatible with a Kernel or vice versa? How do I know what ROMS/Kernels will work with my device?
Farlander said:
What if I have the KD1? What is all this KJ6/KJ1 about? Do I have to find and manually reinstall drivers for my device? Does a ROM need to be compatible with a Kernel or vice versa? How do I know what ROMS/Kernels will work with my device?
Click to expand...
Click to collapse
Well, KJ6 was just released (leaks and source).
KJ1 (kernel) was the last voodoo kernel that drhonk made.
There isn't a KJ6 voodoo kernel, yet.
KD1 is Froyo.
Drivers... If the drivers you have now work, then don't change them
The roms and kernels we are all talking about will work with your device, because they are modified leaks for your device.
Just don't go off flashing stuff from other device forums. That is stupid.
You're basically safe if you mix froyo kernels with froyo roms, and gingerbread kernels with gingerbread roms.
Ok thanks a lot that I can understand. I'll need to brush up on differences between gingerbraed vs. froyo, and whether or not ice cream sandwich is going to be worth the headache. I'm actually happy with the stock rom, it's just that I hate bloatware, and any spy programs, and I want total control over my file access, wifi file sharing, bookmarks/etc. So really all I need to do is root the phone, I was thinking of superoneclick, but I'm not sure the device is supported.
Okay. You NEED to READ. Really dont know if SuperOneClick works with our phone? Come on. Do some research first.
There's a lot of techno jargon babble out there I'm trying to sort through, I'm not 100% literate on everything smartphone yet. When you flash a new kernel, say, KJ6, what happens to your applications? In a windows system they would stop working, but their data files would still exist. Are programs unchanged, do they leave useless data files, or can they somehow be reactivated, like the installer package and the data are in the same folder, just need a little help filling in the blanks Thanks
I know how you feel, but there is not "do it just like this and you will get this result," because development has been fast and furious, even a little ad hoc. The Bible is useful to a point, but in the end you are just going to have to read and cautiously test. If you stick with stock KJ6, your phone should work as intended. If you move to a custom ROM, some things may be buggy and other things may work even better than stock. For instance, battery life is improved via a couple roms I have tried, but wifi (dynamic dhcp) suffers. You just have to proceeed CAUTIOUSLY. Tha's the best advice I can offer.
Farlander said:
There's a lot of techno jargon babble out there I'm trying to sort through, I'm not 100% literate on everything smartphone yet. When you flash a new kernel, say, KJ6, what happens to your applications? In a windows system they would stop working, but their data files would still exist. Are programs unchanged, do they leave useless data files, or can they somehow be reactivated, like the installer package and the data are in the same folder, just need a little help filling in the blanks Thanks
Click to expand...
Click to collapse
If you are looking to JUST ROOT your SGS4G then I would recommend SuperOneClick. Version 2.2 worked for me running stock 2.3.6.
I'm rooting my phone as we speak using superoneclick 1.6.5 shortfuse. I enabled usb debugging, download samsung drivers to pc, installed drivers to pc, then started superoneclick and plugged in the phone. Clicked rageagainstthecage, "ROOT", then after about 10 minutes my girlfriend called me, which I had to answer, only to find out that she was breaking up with me, then it got to the part where it says "running rageagainstthecage" and now it's basically frozen after 30 minutes, superoneclick icon saying "(Not Responding)" Great...
Update: No combination of rebooting and rageagainstthecage was compatible with my device/os/version of superoneclick. I used SuperOneClick 1.6.5, my OS is stock 2.2 froyo, and the with usb debugging enabled, it froze every time. Using psneuter, it worked ok, the superuser icon is there... so, for a test. I went to the browser, still cannot delete those annoying bookmarks. Ok, so now to try and delete some bloatware.... still cannot delete any factory installed programs. So, that seems a bit pointless, I'm going to play with wifi filesharing, file explorer, and see what I can access, will report back.
My ultimate goal is to have a fast as **** phone, complete functionality, no bloatware, all custom apps, I want to be able to shortucut ANYTHING to the desktop, especially a 4g toggle switch. How close am I? So far the phone runs a lot slower than before I rooted.
<< Another wierd glitch, when I went to the market without rebooting the phone first, the screen went black, it vibrated in sets of 3 pulses, and I had to hard power down to reset. Went back to market and problem did not reoccur>>
Ok so I installed Titanium Backup, umm yay now for some fun, started deleting everything that didn't look familiar including those pesky sec.android.acore.blahblahblah and now my phone does that 3 vibe thing and I have to reboot. Ok so next chore is reflashing the rom I guess....
Glad you got it working... ummm, sort of?
From what I understand about where you are, I would
1. Use odin 1.8.5 to flash KJ6 stock.
2. Let it reboot and do its thing for a bit (say, 5 minutes?)
3. Check to see if everything is working, stock--4g, wifi, browser, market etc.
4. Use SuperOneClick 2.2 (after setting usb debug in settings-->applications) to root. May take a few tense minutes, but it works. Least it did for me.
5. Load your titanium and uninstall stock apps as you desire.
6. Get a full charge and calibrate your battery.
7. Lust after the roms (especially the great looking 2.3.5 based one by Raverx3x) that require CWM, but cry over your fear of a no-stock recovery.
Should get you where you want to go.
Farlander said:
Ok so I installed Titanium Backup, umm yay now for some fun, started deleting everything that didn't look familiar including those pesky sec.android.acore.blahblahblah and now my phone does that 3 vibe thing and I have to reboot. Ok so next chore is reflashing the rom I guess....
Click to expand...
Click to collapse
Well, I'm officially the master of this sheeet box. DAAAAANG SKIIPPPY FOLKS I had a soft brick condition, didn't know what the f to do, started getting lost on google and good old you tube led me home, can you believe I was bout to cut my usb wire to make a jig no no no not necessary, just hold both volume button and plug in usb, it goes to download mode. Next I couldn't get odin to recognize the phone but eventually went straight to pc (not through my usb hub) and it popped up, I flased the zip of the closest thing I could find to my stock 2.2 froyo, now I have KB5, kernel 2.6.32.9 wtf wow it almost the same but noticeably different, the settings menu is different, it came pre-rooted, but video skype works perfectly and on front facing camera booyah
been fun fellas talk again soon
I am glad you are where you want to be, but DUDE! I assumed you knew how to get into download mode up vol+down vol+plug in usb. Jeeez! That's frickin' basic! Anyway, glad you're sailing. You should be able to Odin 2.3.6 and root it with SuperOneClick 2.2 now, if you want. I am still trying to get upo the nerve to load CWM and try Raverx3x's Octane. It's a downgrade from 2.3.6, but the screenshots look tasty!
Farlander said:
Well, I'm officially the master of this sheeet box. DAAAAANG SKIIPPPY FOLKS I had a soft brick condition, didn't know what the f to do, started getting lost on google and good old you tube led me home, can you believe I was bout to cut my usb wire to make a jig no no no not necessary, just hold both volume button and plug in usb, it goes to download mode. Next I couldn't get odin to recognize the phone but eventually went straight to pc (not through my usb hub) and it popped up, I flased the zip of the closest thing I could find to my stock 2.2 froyo, now I have KB5, kernel 2.6.32.9 wtf wow it almost the same but noticeably different, the settings menu is different, it came pre-rooted, but video skype works perfectly and on front facing camera booyah
been fun fellas talk again soon
Click to expand...
Click to collapse
Really wtf. Download phone drivers, Odin program, Ravers Odin Kj6 ROM and drhonk KJ1 kernel. You need nothing else.
SOC 2.x
How many times and in how many (slightly) different ways can one say the same damn thing? If he has flashed KJ6 already and wants to keep that kernel, then I still say SuperOneClick 2.2 will root his device. Am I wrong? Why do people keep using SOC 1.x then complain about not getting it to root their gb 2.3.6 successfully?
SOC 2.x...use it!
http://shortfuse.org/
chris31jct said:
Really wtf. Download phone drivers, Odin program, Ravers Odin Kj6 ROM and drhonk KJ1 kernel. You need nothing else.
Click to expand...
Click to collapse
I'm currently on 4.2.2 and plan to root my phone for the first time.
I'm sure there's enough written about how to do it so i will find my way in that.
Before i install any rom, there's a few questions I have though.
1. I plan to install [4.4.2][UNOFFICIAL]Cyanogenmod 11 by cooldevelopment. Does this rom contain modified radiodrivers,
or are the drivers untouched? If i have problems with the radiodrivers, is there a place where i can download untouched radio drivers?
Or maybe i can extract radio drivers from my current rom if i take a backup?
The reason i ask is because i dont mind modifying my phone but i like to leave the drivers responsible for radiotransmission intact, radiation and stuff.
2. If i decide to go back to stock rom and download an official 4.4 OTA (which probably wont ever come),
it is possible to flash with stock rom and unroot my phone, right?
Thanks a lot people
I am also interested in an answer to this question due to the bluetooth issue.