Hi the new app Kernel Manager from HTC Aria Forums this Kernels Work with our Inspire 4G? this Kernels is For Desire HD and other devices but not listed exactly Inspire 4G
Any Testers Allready?
celtichazard said:
Hi the new app Kernel Manager from HTC Aria Forums this Kernels Work with our Inspire 4G? this Kernels is For Desire HD and other devices but not listed exactly Inspire 4G
Any Testers Allready?
Click to expand...
Click to collapse
Wrong section, questions should be in general.
Could you clarify you question a little better?
Its running on mines
Sent from my HTC Inspire 4G using XDA Premium App
Sorry Dude for post Here
Please Move This Post
and allready try this with the Kernel Manager:
I Flashed LorDmod V3.1.3 and OC to 1766.4 with Disabled Perflock
Update: DONT FLASH!! leppie Your touch Screen dont work and you need restore in recovery
other Config. Same Kernel
before 6-8 minutes in this config my phone crash, need put out battery to reset.
celtichazard said:
other Config. Same Kernel
before 6-8 minutes in this config my phone crash, need put out battery to reset.
Click to expand...
Click to collapse
I'd be EXTREMELY careful running your CPU at that speed. 1.5 has been considered "safe" by most people, but anything over that and you're tempting fate. Sure, it's cool to see your phone running at 1.8 or 1.9ghz, but your CPU is going to be forced waaaay out of its specifications and it's possible to damage it beyond repair. This is especially true if you are over-volting. Heat + Voltage = CPU Killers. However, even if you aren't over-volting, it could still draw more power than it was designed to do, thereby increasing heat, overstressing CPU and power supply...
So yeah, be careful.
Thanks man i just OC to this point to se what this phone can do i think this is the first and last High Quadrant can reach becauce later on the day i try to repeat the same benchmark and no reach the 3400 points. I think the CPU was enought stressed and now cant handle 1.9 Ghz. freq. but is cool. Right Now im running with LordMod 4 CFS clocked at 1.3 Ghz and works greathe. this give me 2700 +/- Quadrants and its enought power to make all kind of task and apps running a breeze.
Running any LorDMod kernel results in no wifi for me. I'm being lazy with manually pushing the .ko file though, so I dunno.
WiFi works fine here. Im. Use cyanogen mode 7 with lordmod 4.0
Sent from my Desire HD using XDA App
celtichazard said:
other Config. Same Kernel
before 6-8 minutes in this config my phone crash, need put out battery to reset.
Click to expand...
Click to collapse
what a terrible thing!
Hi guys,
I just flashed my Inspire to the RCMix3D ROM. Is there a way to overclock the Inspire? I've seen a few apps on the market for it, like setcpu, but I'm not sure where a good place to start is. That and underclocking to help save battery life. Sorry if this is a repeat thread. Couldn't find any relevant to the ROM I have.
Thanks in advance!
elijahpr said:
Hi guys,
I just flashed my Inspire to the RCMix3D ROM. Is there a way to overclock the Inspire? I've seen a few apps on the market for it, like setcpu, but I'm not sure where a good place to start is. That and underclocking to help save battery life. Sorry if this is a repeat thread. Couldn't find any relevant to the ROM I have.
Thanks in advance!
Click to expand...
Click to collapse
Imm on a similar ROM. RcMix Kingdom rom and I use CPU master free from the market. I underclock to: 245 and overclock anywhere from 1.2 to 1.7 usually with a conservative setting to save battery life. It works rele well.
*srry iff I typoed*
Sent from my HTC Desire HD using XDA App
Get setcpu from the Market, works great!
Just be careful when overclocking. Don't overclock too high. It can cause issues and if you have set on boot checked, it can a real pain if you set it too high. I usually don't go any higher than 1200 mhz.
Sent from my Inspire 4G using Tapatalk
coredroid is good
The newest version of Coredroid (v.8.1) allows for a 2ghz overclock! be careful tho, as running the processor that fast WILL make the phone very hot! and drain your battery. If for some reason tho you need the performance, its there.
I need it to overclock my phone, but I would rather not mess it up myself. Many thanks
Sent from my HTC Sensation Z710e using XDA App
Have U not been reading the Dec thread. Don't overclock. Set CPU limits the 2nd CPU to 1 ghz and only overclocks one core
Sent from my HTC Sensation Z710e using XDA App
Knucklessg1 said:
I need it to overclock my phone, but I would rather not mess it up myself. Many thanks
Sent from my HTC Sensation Z710e using XDA App
Click to expand...
Click to collapse
you do not need that text file. If the kernel supports overclocking, you're good.
nugzo said:
you do not need that text file. If the kernel supports overclocking, you're good.
Click to expand...
Click to collapse
I'm sorry if i was not clear. I meant i wanted to overclock my phone with SetCPU, but it requires a text file because it hasn't been added to the presets yet.
nugzo said:
you do not need that text file. If the kernel supports overclocking, you're good.
Click to expand...
Click to collapse
maybe i wasnt clear. you do not need that text file. If the kernel supports overclocking, you're good. If it doesnt not support overclocking, the text file wont help.
No point, dual-core overclocking has JUST come onto the development scene for the sensation, and it has lol-bugs and is definitely inconsistent for everyone. Until all that can get hammered out, there is no point to overclocking, unless you are one of those nightly guys (I am )
The first thing is that only 1 core gets overclocked, beyond that, only 1 core is active for the majority of the time on the Sensation.
Benchmarks aren't even accurate because benchmarks like Quadrant don't even activate the second core.
However, if you want dual-core active all the time, I recommend flashing ARHD 3.0.3 with the dual-core script. It does work.
Faux Kernel 0.0.8 has come out which offers dual-core overclocking, but it does come with it's own handful of problems. Many are reporting boot-loop issues (IMO it's due to the kernel being somewhat unstable as well as setting too high of an overclock for initial settings) You need to flash the kernel as well as the dual-core script and then manually edit the script in system/etc/dual-core/main_script to set your clock speeds.
I'm going to also repeat what the other said.
SETCPU AUTOMATICALLY DISABLES ONE CORE AND DOES NOT OVERCLOCK IT NONE of the overclocking apps are dual-core ready. Heck, Android OS isn't even ready for dual-core. There have been lots of workarounds to get dual-core supported on these devices from the "factory" itself.
With the stock rom on a rooted MT4GS, can SetCPU be used either to underclock or overclock? Or both?
And if so, what would be safe settings to use?
You can certainly underclock (or at least try) with setCPU; however, overclock cannot yet be achieved since HTC hasn't released the kernel source code yet so none of that can be manipulated.
unclespoon said:
You can certainly underclock (or at least try) with setCPU; however, overclock cannot yet be achieved since HTC hasn't released the kernel source code yet so none of that can be manipulated.
Click to expand...
Click to collapse
Great, thank you!
I've used SetCPU with the stock ROM because sometimes the max speed is set to 972MHz instead of the maximum 1188MHz. One problem though is that I get those 'SetCPU has been granted superuser permissions' every few minutes. Is the OS killing SetCPU or trying to prevent any changes to the clock speed?
Interesting...I haven't had that problem.
Sent from my myTouch_4G_Slide using xda premium
As some of you might know, the HTC Desire S overclocks very well.
I've done alot of research, and I've found no difference between the MSM8255 chipset our Desire S runs on, and the higher clocked MSM8255T (which runs at 1.4-1.5GHz).
I've created this topic to gather some information on what method you use to over/underclock (built-in, custom, app etc), how high you've clocked your device, what governor you're using, and what temperature you're at.
Right now my Desire S runs at 1.4GHz, incredibly stable, ive stress tested for hours (so far) without any errors, maxing at bout 36,5c temp.
My current method is SetCPU, using 245-1401 interactive scaling.
Please post your findings / preferences / device settings.
I never overclocked my Desire S. Ok sometimes he can be slow, but I don't like overclocking a CPU of a smartphone... Maybe it's because I'm scared to blow him up or something, dunno. I just leave it like it was, in my eyes, the best thing you can do
I'm using OC/UV Beater2 which came in Endymion ROM. My DS is overclocked to 1,2 Ghz and it is very stable, never freezes
But I have a question, what is default undervolt settings? Because I think when I set for example -25 undervolt settings, that will come default setting after a while..
So I dont know what is default voltage... So if someone could tell what is though 122Mhz voltage, I would be happy!
1ghz ondemand. Sometimes 245/768mhz and in games 1.2ghz
Raaert said:
As some of you might know, the HTC Desire S overclocks very well.
I've done alot of research, and I've found no difference between the MSM8255 chipset our Desire S runs on, and the higher clocked MSM8255T (which runs at 1.4-1.5GHz).
I've created this topic to gather some information on what method you use to over/underclock (built-in, custom, app etc), how high you've clocked your device, what governor you're using, and what temperature you're at.
Right now my Desire S runs at 1.4GHz, incredibly stable, ive stress tested for hours (so far) without any errors, maxing at bout 36,5c temp.
My current method is SetCPU, using 245-1401 interactive scaling.
Please post your findings / preferences / device settings.
Click to expand...
Click to collapse
Yeah, I've done some research too, and cannot find any differences about the 8255T vs 8255.
Ours are highly capable of going to 1.8Ghz stable.
What are the key differences?
-------------------------------
Sent from my HTC Desire S
How severely does overclocking affect battery life
Sent from my Desire S using xda premium
245-1200MHz, interactive governor, using CM7 built in performance control. Phone is very stable, never had any problems because of OC. The highest temp i saw was +34C.
Sent from my HTC Desire S using xda premium
Same CPU 'issue' with the Arc and Arc S ->
http://forum.xda-developers.com/showthread.php?t=1396071
That pretty much sums it up, why the Desire S (some - mine?) overclocks so well..
Same thing they do with desktop CPUs.
Like my old C2D E6600 2.4GHz OCs to 3.4GHz without adding volts and running only on air cooling, 48c after 10-12hrs of stress testing with SLI nvidia cards in the case.
All in all, the MSM8255 and MSM8255T could easily be the exact same chipset/CPU, just at different speeds, some tested more extensively than others.
Has anyone tried running speeds above 1.5GHz+ successfully? 1.5GHz should also be doable, as the HTC Flyer has the MSM8255T and runs at 1.5GHz.
Raaert said:
Same CPU 'issue' with the Arc and Arc S ->
http://forum.xda-developers.com/showthread.php?t=1396071
That pretty much sums it up, why the Desire S (some - mine?) overclocks so well..
Same thing they do with desktop CPUs.
Like my old C2D E6600 2.4GHz OCs to 3.4GHz without adding volts and running only on air cooling, 48c after 10-12hrs of stress testing with SLI nvidia cards in the case.
All in all, the MSM8255 and MSM8255T could easily be the exact same chipset/CPU, just at different speeds, some tested more extensively than others.
Has anyone tried running speeds above 1.5GHz+ successfully? 1.5GHz should also be doable, as the HTC Flyer has the MSM8255T and runs at 1.5GHz.
Click to expand...
Click to collapse
Ah!
Many thanks for that mate!
Been looking and couldn't find much info too!
Yeah, i guess the T stands for being tested more.
My Desire OC's very well. I can go to 1.8Ghz stable for very long.
(I don't usually OC though.)
I tried 2.0ghz too for about 10 minutes with no issues. but I quickly went back to 1ghz incase I had any issues.
-------------------------------
Sent from my HTC Desire S
My CPU clock is as in my siggy. I don't undervolt though.
I have overclocked my phone to 1.5GHz almost all time and I do not see any problem, it's very fast and snappy. I use Sense roms, CM7 and ICS without freezes or something like that. Battery life is nice for me, 1 or 2 days of use.
I've got mine oc at 1.2ghz and uv .75 on everything using ocuv and has been stable for weeks now with good battery life.
CM7.1 Stable
TIAMAT Kernel
SmartAssv2: 184mhz - 1017mhz
Screen Off: SmartAssv2 184mhz - 384mhz
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
Sent from my HTC Desire S
Do you use setcpu? Can i use it also on latest stock cm7. 1 for desire s? Or is tiamat necessary? I'm mainly interested in undervolting -> better battery life.
peters. said:
Do you use setcpu? Can i use it also on latest stock cm7. 1 for desire s? Or is tiamat necessary? I'm mainly interested in undervolting -> better battery life.
Click to expand...
Click to collapse
Hi there,
Yes I use setcpu. Tiamat kernel is Undervolted by default which is good.
I'm my experience, I'm getting much better battery life with Tiamat kernel.
Are you on the nightly build or the stable version? I heard a few issues with tiamat on nightly builds, but not too sure!
Also a small note; undervolting doesn't help massively with battery life... the battery gain is minimal. On sense based ROMs, I UV by about 125V and it doesn't make a HUGE difference.
I think tiamat has really good battery llife as it has been exclusively optimised for our 8255 CPU by the brialliant Devs
Hope this has been some help to you!
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
Sent from my HTC Desire S
I never overclock higher than 1.5 GHz, I dont want to melt my phone.
Sent from my HTC Desire S using XDA App
I'm on latest nighly, which doesn't work with tiamat 1.1.5 (no sound). Nightly fixed some bugs which were crucial for me, so no way going back to stable.
Reason i'm asking: on lowveld's hyperions i got 8-9mA consumption while idle, on CM i'm always at 10-15. The min freq on both is 245mHz, which was suggested as lowest stable so the next difference i thought could be the undervolting... From battery stats i see that phone was not awake...
peters. said:
I'm on latest nighly, which doesn't work with tiamat 1.1.5 (no sound). Nightly fixed some bugs which were crucial for me, so no way going back to stable.
Reason i'm asking: on lowveld's hyperions i got 8-9mA consumption while idle, on CM i'm always at 10-15. The min freq on both is 245mHz, which was suggested as lowest stable so the next difference i thought could be the undervolting... From battery stats i see that phone was not awake...
Click to expand...
Click to collapse
What bug fixes did the nightlies bring? Please share!
Hmmm... I guess you could just wait for CM 7.2, I think its coming very soon with the bug fixes, so I guess you could go back to stable from there, and use Tiamat.
My lowest CPU clockspeed is 184Mhz on CM (122Mhz on Endymion)
Its very stable for me. No freezes, etc
I use smartass2, so it will throttle up the speed in sleep if 184mhz is too low. When it has many tasks to load etc.
Not to sure how to Manually UV with CM, (as OC beater doesn't work - FC on me)
But on Endymion, OC beater app does the job.
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
Sent from my HTC Desire S
Mainly bugs with voip calls. After htc released kernel sources, Nexx included them into the cm and the voip audio hack was not needed any more... Hopefully cm9 will be out sooner than 7.2
peters. said:
Mainly bugs with voip calls. After htc released kernel sources, Nexx included them into the cm and the voip audio hack was not needed any more... Hopefully cm9 will be out sooner than 7.2
Click to expand...
Click to collapse
Yeah, hopefully!
Side note: on sense, i could OC easily to 1.5ghz, possbily more! And it was very stable.
But now with CM7, i OCed to 1.5ghz and it froze... I tried several times too ..
So does software depend on how much the CPU can clock?
Sent from my iPod touch using Tapatalk