I have a Verizon TP2 and have unlocked the SIM. I'm heading for Ireland next week and have purchased a prepaid GSM SIM for use in Ireland. Do I need to reset any of the Phone Settings on my TP2 or will it automatically make the changes when I insert the SIM and turn it on in Ireland. Thanks.
cgtayloriii said:
I have a Verizon TP2 and have unlocked the SIM. I'm heading for Ireland next week and have purchased a prepaid GSM SIM for use in Ireland. Do I need to reset any of the Phone Settings on my TP2 or will it automatically make the changes when I insert the SIM and turn it on in Ireland. Thanks.
Click to expand...
Click to collapse
i am using sprint TP2, easy switch to GSM network, just go to setting/connection management/phone setting/network
choose GSM ONLY, then system will search GSM network automatically
remember insert GSM SIM card in the phone first
You will have to get data connection setting for the prepaid provider if you want to use your data connection
Rhodium500 said:
You will have to get data connection setting for the prepaid provider if you want to use your data connection
Click to expand...
Click to collapse
That is what happend to me with my VZW TP2 in Greece.
Switching to GSM only worked for the phone but I need settings for SMS and Data.
Got the settings but VZW put some kind of lock on the connections settings app. My settings would always revert back to the vzw settings and I would always get connection failur pop up.
Got back home and found online some details about "CMGaurdian"
This program either locks the conection manager or imediately reverts changes back to stock. I think you may need to disable this in registry to enable data and out going sms reliably.
I got my lovely droid 2 global (white) today, which is amazing. However, when I turned on the phone, it required me to activate. How can I activate it in Toronto, Canada without in US? Thanks.
Exit that wizard, switch to GSM/UMTS and you are ready to go (assuming you unlocked)
hi all,
i've been using my lovely Droid 2 Global outside US for quite a while (unlocked and using GSM network), and it worked all fine till today...
i tried to install fission today, and it didn't work for me (it just won't boot up), so i restore to 2.3.29, and finally managed to boot it up...
but after i power up, and enter PIN for my SIM, it requires me to Activate the phone...when i hit Activate, it immediately show "Phone Activation not supported on this network"...any suggestion on what i should do? i think i have the unlock code that i got from the buyer, but the phone doesn't even give me a chance to enter it!!!
i don't need to use Verizon network, i just want to use my D2G under GSM!! Please help!
i should have asked: why i need to re-activate again simply bcs i restore from a SBF??? I thought it shall stay as activated and unlocked once it was done...am i thinking wrongly?!
Don't freak up. Activation is only for CDMA radio. Every time you do factory restore (wipe data) CDMA programming gets erased too. GSM radio doesn't need activation. Simply ignore this, switch to GSM/UMTS mode and start using your phone.
If you have US account and you want to reactivate so you can use CDMA roaming feature, you need to do manual activation, but you may need Verizon's support to help you with some numbers you need to put up in programming.
BTW - the boot loop happened because you didn't wipe data after SBF. Fission (and any other non-stock ROM) will cause boot loop if you don't wipe data after SBF flash. (SBF flash process does not wipe data as part of the flashing).
GSM radio need to activate to use outside USA ! You need to contact with Verizon to get unlock code or use some unlock sim
tigerboy said:
GSM radio need to activate to use outside USA ! You need to contact with Verizon to get unlock code or use some unlock sim
Click to expand...
Click to collapse
You are mistaking unlocking with activation process. On GSM you activate the SIM card (Subscriber Identification Module), while on CDMA the "SIM" is integrated in the radio, hence you activate the radio.
For Droid 2 Global since it has essentially 2 radios - a GSM and a CDMA one, for GSM you need active SIM card to activate and for CDMA you need to make sure phone's MEID is active on your Verizon account then you program it (activte) either automatically while on Verizon network by dialling *228 or manually by calling Verizon support.
For the GSM radio in D2G, in order to use non-Verizon SIM in it, you need to unlock the phone first. Once unlocked, phone remains permanently unlocked and no SBF or wipe or anything will change this status.
Hey guys. I just bought an unlocked D2G on ebay so I thought I would share my experiences.
I got to the same screen where I was told "phone activation not supported on this network" and it was extremely frustrating. my only option was to hit ok and go back to the "touch the android" screen. I tried everything including the menu button. Nothing worked. This was with my SIM card inserted.
So I took out my SIM card and tried again. this time the menu button worked; it brought up the wireless options menu. I wanted to switch to "GSM only" as I had a feeling that would fix the problem. But I was told "no GSM card, must use CDMA mode". So, feeling stuck, I called Verizon, and after waiting on hold with the first CSR, and getting about 30 seconds into the phone call with the high up tech guy, I was in the middle of telling him about how in CDMA mode the wireless options menu would come up, but not with a SIM card inserted, the wireless options menu actually did come up. So I switched to "GSM only" and I was in!
Well, sorta. I had to get the phone linked with my google account via wifi, because the phone had no internet at all. A quick search of the internet revealed that this was a common problem - "I can talk on my D2G, but no data!" I called Rogers and sure enough, there were some settings I had to change to make this work.
Go into wireless options, then mobile network settings, then GSM/UMTS options (I assume you have a D2G because you want a droid you can put your SIM card in, right?) and then to Access Point Names. As this phone is unlocked, there are no APNs listed and your phone is neutered until one is added. I had no idea because my last phone was straight from Rogers and was of course hardwired to know this stuff.
Setting up the APN is really easy. just give it any name, list the APN as internet.com, MCC is 302, and MNC is 720. That's all. Back out. You will notice nothing is showing there. Don't do it again. It's there, but it's not showing up until you reboot. On my first reboot I had the 3G icon pop up in the notification bar and just about filled my pants. finally, the phone I paid $400 for was fully functional! No issues since then. Smooth as butter.
Thanks for the information and sharing leobg and seventieslord!
Gingerbread's rolling out, I'm planning to update my dad's D2G, but we're outside the US with an unlocked phone using GSM. I was worried after updating to Gingerbread, the phone would ask for a reactivation. This thread put my mind to rest
seventieslord said:
Hey guys. I just bought an unlocked D2G on ebay so I thought I would share my experiences.
I got to the same screen where I was told "phone activation not supported on this network" and it was extremely frustrating. my only option was to hit ok and go back to the "touch the android" screen. I tried everything including the menu button. Nothing worked. This was with my SIM card inserted.
So I took out my SIM card and tried again. this time the menu button worked; it brought up the wireless options menu. I wanted to switch to "GSM only" as I had a feeling that would fix the problem. But I was told "no GSM card, must use CDMA mode". So, feeling stuck, I called Verizon, and after waiting on hold with the first CSR, and getting about 30 seconds into the phone call with the high up tech guy, I was in the middle of telling him about how in CDMA mode the wireless options menu would come up, but not with a SIM card inserted, the wireless options menu actually did come up. So I switched to "GSM only" and I was in!
Well, sorta. I had to get the phone linked with my google account via wifi, because the phone had no internet at all. A quick search of the internet revealed that this was a common problem - "I can talk on my D2G, but no data!" I called Rogers and sure enough, there were some settings I had to change to make this work.
Go into wireless options, then mobile network settings, then GSM/UMTS options (I assume you have a D2G because you want a droid you can put your SIM card in, right?) and then to Access Point Names. As this phone is unlocked, there are no APNs listed and your phone is neutered until one is added. I had no idea because my last phone was straight from Rogers and was of course hardwired to know this stuff.
Setting up the APN is really easy. just give it any name, list the APN as internet.com, MCC is 302, and MNC is 720. That's all. Back out. You will notice nothing is showing there. Don't do it again. It's there, but it's not showing up until you reboot. On my first reboot I had the 3G icon pop up in the notification bar and just about filled my pants. finally, the phone I paid $400 for was fully functional! No issues since then. Smooth as butter.
Click to expand...
Click to collapse
God damned life saver ...... It is such a small change.... Add a APN.....
THANK YOU !
Trying to switch from CDMA to GSM, sprint to tmobile and tried 2 ways that haven't worked. 1st way involved selecting preferred network to global ,swapping out SIM cards ,selecting APN . The 2nd way was dialing *#*#72786#*#*, swapping SIM cards, while phone is restarting select APN, restart.
Our phone came with a free 1 yr service from FreedomPop. I'm suppose to be able to cancel service at any time.
I also took the phone to a wireless repair store and they told me the phone can't be switched to GSM. I've read that it can. HELP!!!
The main problem is that the phone can't send texts or call out. It can receive calls and texts.
Hi I receive my idol3 today and I popped in my metropcs sim that I've been using for my S3. The phone recognizes the sim because it prompted me to choose an apn, but the phone remains in emergency calls only. I turned off, factory reset but the issue still occurs. Any help would be appreciated.
You may have to revise your APN settings for Metro PCS. Have you done a web search for the appropriate Metro PCS APN settings?
kevin6876 said:
You may have to revise your APN settings for Metro PCS. Have you done a web search for the appropriate Metro PCS APN settings?
Click to expand...
Click to collapse
Yeah and it comes to the same as one of the options in the apn screen
it's weird it recognizes my number but for
Network: Unknown
Service State: Out of service/ Data: Out of service
Signal Strength: 0
wifi works and it reads my sd card.
Metro
Whenever you switch devices on Metro pcs you have to call customer service and have them swap the devices in their system. It's how most CDMA carriers do it and Metro used to be just CDMA before Tmobile. So your device isn't activated on the account the sim card is on. It's really weird for GSM based carriers and I do hope Metro will change their system.
Hi, I used the ##3282# code to go to the data services menu to unlock DDTM and LTE but the service 000000 doesn't work. Neither does the one got from here :
https://www.whiterabbit.org/android/
My phone keeps trying to find network. I am on MetroPCS. The phone came unlocked and worked fine until I flew to a different state and came back.
Now.
- If it's on "Automatic (Recommended)" network mode selection I can recieve calls but cannot use data.
- If I select 5G / 4G (LTE) / CDMA only data works. Can't receive calls/texts.
Any help would be appreciated