Database Info

[Flashable .ZIP] Users WHO DO NOT WANT TO USE ODIN to return to stock DI18 for 2.2.1

http://forum.xda-developers.com/showthread.php?t=786266
Download the stock DI18 rom from http://www.sdx-downloads.com/devs/noobnl/stock.epic.DI18.rom.update.zip and move to sdcard
Flashable .zip - You can flash this alternatively Flashable DK28.zip after wiping you phone and flash any DK28 Rom you wish instead of the steps below
Make a nandroid and wipe data/cache 3 times and flash the stock rom and reboot
reboot, go back into clockwork and flash the update.zip for 2.2.1
All you gotta do is flash. I havent tested it myself[in the process] but just wanted to share the info with other who dont trust odin
I take no credit but all goes to noobnl and Firon for the flashable modem
*EDIT*
Confirmed that this method worked..will post a pic later
WHOOOOOOOOOOOOOOOOOOOOOOOOOOO

Zei said:
http://forum.xda-developers.com/showthread.php?t=786266
All you gotta do is flash. I havent tested it myself[in the process] but just wanted to share the info with other who dont trust odin
I take no credit but all goes to noobnl
Click to expand...
Click to collapse
This does work for the ROM itself, if you want to use the OTA. (The modem, probably not.) Good reminder, that thread's buried.
You can also use this if you like.

k0nane said:
This does work, if you want to use the OTA. Good reminder, that thread's buried.
You can also use this if you like.
Click to expand...
Click to collapse
I knew it was a stock DI18 rom out there from the early days of using OTA's to update...just went to the Wiki to find it.
Good looks on you guys ROM

You MUST Odin to DI18 modem to update your modem successfully. Alternatively, use Odin to flash the DK28 modem.
There is no update.zip that can flash you back to DI18 modem!

Firon said:
You MUST Odin to DI18 modem to update your modem successfully. Alternatively, use Odin to flash the DK28 modem.
There is no update.zip that can flash you back to DI18 modem!
Click to expand...
Click to collapse
But didnt you make the updater .zip to return to DI18? I just downloaded your file for it....
*Edit* im on DI18 already but just for the other users who do not wanna brick their phone...using odin for some users have caused brick...I was one of them

My current Baseband version is S700.0.5S.DI18 - so I assume that means I wouldn't need to sue Odin to revert the modem back? I could just apply these .zips and then apply today's OTA afterwards?
Thanks guys!

bagelicious said:
My current Baseband version is S700.0.5S.DI18 - so I assume that means I wouldn't need to sue Odin to revert the modem back? I could just apply these .zips and then apply today's OTA afterwards?
Thanks guys!
Click to expand...
Click to collapse
It works my man

Zei said:
It works my man
Click to expand...
Click to collapse
Thanks for posting this - I'm downloading the stock.epic.DI18.rom.update.zip right now. You guys rock!

Awesome, thanks Zei for this. I was looking for a way to avoid Odin. Three quick questions:
1 - I'm on DI18 (baseband S700.0.5S.DI18), but not quite stock - I have the deodexed DI18 installed, but no custom ROM). Will this method work for me?
2 - In your link for the stock DI18 ROM in the first post, I'm assuming you're talking about downloading the first file in the linked thread (there are 4 downloadable files in the first post in the linked thread)
3 - What's the best way to restore data after this process - I've made many nandroid backups but never had to restore - can I do a custom nandroid restore and restore just user app data? Should I do a Titanium backup/restore for data?

I wouldn't restore data from Eclair to Froyo... likely will lead to endless force closes and errors.
Sent from my SPH-D700 using XDA App

rsage said:
Awesome, thanks Zei for this. I was looking for a way to avoid Odin. Three quick questions:
1 - I'm on DI18 (baseband S700.0.5S.DI18), but not quite stock - I have the deodexed DI18 installed, but no custom ROM). Will this method work for me?
2 - In your link for the stock DI18 ROM in the first post, I'm assuming you're talking about downloading the first file in the linked thread (there are 4 downloadable files in the first post in the linked thread)
3 - What's the best way to restore data after this process - I've made many nandroid backups but never had to restore - can I do a custom nandroid restore and restore just user app data? Should I do a Titanium backup/restore for data?
Click to expand...
Click to collapse
1. Id flash the stock rom for just in case purposes. No need todo any extra work for no reason
2. Yes, the 1st link is the correct link
3. TBH, I wouldnt recommend a nandroid data restore for this. Seeing as this is a brand spanking new rom I wouldnt risk it then have to start the process over again. Titainium Backup is the safest way togo for now

Thanks to all the Devs who worked on this.
DOes anyone know how to access the TV out function? Or if it is available in this release?

I am up and running after using this version. Seems almost too good to be true so far! Thanks again you guys.

I'm still on the di18 modem but a 2.2 early leak..do I have to do anything or can I just flash the roote dk28...I'm so lost in all this atm

imtjnotu said:
I'm still on the di18 modem but a 2.2 early leak..do I have to do anything or can I just flash the roote dk28...I'm so lost in all this atm
Click to expand...
Click to collapse
You need to be on stock DI18 because the OTA will not flash unless it has certain stock apps to recognize

Zei said:
You need to be on stock DI18 because the OTA will not flash unless it has certain stock apps to recognize
Click to expand...
Click to collapse
Can the ota be rooted

imtjnotu said:
Can the ota be rooted
Click to expand...
Click to collapse
yes the current oneclick method works just fine. Make sure you have the phone in debug mode

http://firon.net/xda/stock.dk28.modem.update.signed.zip
For anyone on DI18, you can use this to upgrade your modem to DK28, then flash any ROM you want. This will probably NOT work on other, newer modems, but you can try it!

Firon said:
http://firon.net/xda/stock.dk28.modem.update.signed.zip
For anyone on DI18, you can use this to upgrade your modem to DK28, then flash any ROM you want. This will probably NOT work on other, newer modems, but you can try it!
Click to expand...
Click to collapse
Ill add this to the post

Firon said:
http://firon.net/xda/stock.dk28.modem.update.signed.zip
For anyone on DI18, you can use this to upgrade your modem to DK28, then flash any ROM you want. This will probably NOT work on other, newer modems, but you can try it!
Click to expand...
Click to collapse
Sweet Ill test it right now.....

[ROM]FOTA 8.2.3.9-20110423 | Root | Stock

This is the Official UK FOTA with root added and the Recovery/Boot update removed. These will not work on a non UK Device. I plan to add updates from other locations so if you have these official FOTA's available, please pm me.
I haven't changed anything else in the update so future upgrades should in theory work with this rom.
Install this with cwm and enjoy the new features that the FOTA update brings without having to worrying about losing root. This rom will only work if you are running the stock rom that the transformer came with. This will only install on top of the previous firmware update and will fail if you are using any other rom.
Root is not required to install this rom
Thanks to MoDaCo for the custom recovery that makes this rom possible.
First FOTA
R1_TF101_FOTA1_Root.zip
Alternative Link
Second FOTA:
R2_TF101_FOTA2.zip
Alternative Link
These are cumulative updates that can only be installed on top of stock HRI66.WW_epad-8.2.2.6-20110325 using custom recovery.

Reserved...

any way u can get a sys dump for us?
like use root explorer and just copy that sys folder and stuff or ADB?

No need for me to do this, as someone already did.
You can get it from this post here:
http://forum.xda-developers.com/showthread.php?p=13028129#post13028129
Good work on the deodexing btw.

thanks man a full rom will be up tonight o and i found this guy and his pet tree in GalleryNew3D.apk
just so we can have some laughs.

Great work. Can I flash this over the Modaco rom?

i dont think so i think u would need to delete app and framework in the system folder then flash my rom
ill be working on the recovery once i get on to help out on the scripts

im uploading a fixed rom go to my topic and u can post there since we r getting OT here.

Thank you for taking the lead on this. We - the new Transformer user base - are in your debt.
My unit, one of the first in the US release, is on its way to me from PC Richard. I'm hearing that it's likely to update its firmware automatically on switch-on. I'd prefer to use your update with root built in, so my questions are:
1. Is there a way to block the auto-update on a new Transformer - e.g. by not setting up its Wi-Fi till I've installed your rom? Or will it update from a version stored in its flash memory regardless?
2. If it is possible to block the initial update, will installing your rom prevent the official OTA from taking place afterwards? Or is a subsequent clash likely to occur?
3. The MediaFire link isn't currently working for me. That's a first! Do you have another link?
Thank you again for all your work.

if u want my rom was based off this just deodexed and a few things were fixed to use less ram etc. if u flash my rom the OTA wont happen. because it will already think u have the latest running since u would.
when the next OTA comes out when it trys to install it will fail most likely just like all other rooted devices.

dc13 said:
if u want my rom was based off this just deodexed and a few things were fixed to use less ram etc. if u flash my rom the OTA wont happen. because it will already think u have the latest running since u would.
when the next OTA comes out when it trys to install it will fail most likely just like all other rooted devices.
Click to expand...
Click to collapse
Thank you for this. So the deodexed rom (V.2) is the latest ASUS firmware with root?

yes everything about it is in the op/changelog area and i will keep that up to date

I really want to try your rom, but i want to know if i can restore the stock and remove clockwork recovery. In case of a warranty

jibril.r6 said:
I really want to try your rom, but i want to know if i can restore the stock and remove clockwork recovery. In case of a warranty
Click to expand...
Click to collapse
The current clockwork is a "soft" recovery - i.e the physical recovery image isn't overwritten.
Therefore, assuming with the new roms you can still use the same clockwork recovery you can backup pre-flash ("factory") flash the new roms. Any issues, boot back into recovery and restore from the Nandroid.

Highland3r said:
The current clockwork is a "soft" recovery - i.e the physical recovery image isn't overwritten.
Therefore, assuming with the new roms you can still use the same clockwork recovery you can backup pre-flash ("factory") flash the new roms. Any issues, boot back into recovery and restore from the Nandroid.
Click to expand...
Click to collapse
thank you very much!
tonight i'm going to flash!!!
The Transformer it's a very good device... it's a pity that honeycomb is still so... experimental!

Anyone else getting 403 Forbidden error from MediaFire when you actually go to download FOTA2.zip?

New links added...

Also, I've tried searching for this, but haven't found anything yet. Maybe you can shed some light. In my build.prop, the fingerprint shows US_pad instead of WW_epad, so it doesn't pass the checks in CWM recovery when I try to update using your ZIP files.
I'm guessing the US_epad signifies that it is the US build, and WW_epad is the UK build? My transformer came with build 20110325, and System Update says that there are no updates available.
Sent from my Transformer TF101 using Tapatalk

I figured they would be different, If anyone can get me the US updates from /cache I can mod these and add these to my first post.

Somehow I don't think the US version has updates pushed out yet. I keep hitting Check Update and it always comes back no updates available.
Sent from my Transformer TF101 using Tapatalk

[ROM][STOCK][CWM] Stock Deodexed ROMs

Not sure why anyone would really need these versus a debloated ROM, but here they are. These are the stock ROMs, just deodexed and zip aligned. They won't flash the kernel, only system.
Download - ED1
Download - ED2
Download - EE4

Updated OP with deodexed EE4

will you be releasing a debloated ee4?

asenduk said:
will you be releasing a debloated ee4?
Click to expand...
Click to collapse
Yes, slowly working on getting the debloated ROM updated.

Can I flash this in odin with lagfix enabled???? Rooted my charge last night worked great, woke up this morning and stuck on samsung logo
Sent from my SCH-I500 using XDA Premium App

No, these are meant to be flashed in CWM and you will want to have Voodoo disabled before flashing any of the packages here.

Ok im so glad you posted these, imnuts. These files basically got my baseband modems back.?
Sent from my SCH-I510 using XDA Premium App

Does the EE4 include the new Radio? Thanks!

Doing this gets rid of root?
This will put back to factory correct?

Jessberto said:
This will put back to factory correct?
Click to expand...
Click to collapse
Deodexed factory, which isn't stock. These are primarily for anyone looking to create a ROM, or looking for a particular file, or files, that aren't in a ROM. That, or someone who is fine with Stock, but would like to use a theme.

Jessberto said:
This will put back to factory correct?
Click to expand...
Click to collapse
No, you need the real stock ROMs here:
http://forum.xda-developers.com/showthread.php?t=1108115

Unfortunately, I have an issue with the EE4 deodexed ROM, and it is reproducible.
After installing it for the first time, I get an error in CWM stating "Can't mount /sdcard." Reflashing CWM with ODIN did not fix the issue. Note that on this install, I had installed the PBJ kernel prior to installing this deodexed ROM.
At this point, I had to restore the full stock ED2 and do the OTA to EE4. This time I installed this deodexed EE4 first, rather than installing the kernel first to see if that made a difference. After installing this deodexed EE4 once again, it went back to the default android recovery. After reinstalling CWM, I once again got the same error of "Can't mount /sdcard." This is a problem since I am no longer able to do any updates in CWM.
This EE4 deodexed ROM will boot, but I have problems accessing the SD card when hooked to the computer. It can't read many files, and won't write at all. I have no problems accessing the SD card outside of this ROM.
Any help or suggestions are greatly appreciated!

BeefJerky9 said:
Unfortunately, I have an issue with the EE4 deodexed ROM, and it is reproducible.
After installing it for the first time, I get an error in CWM stating "Can't mount /sdcard." Reflashing CWM with ODIN did not fix the issue. Note that on this install, I had installed the PBJ kernel prior to installing this deodexed ROM.
At this point, I had to restore the full stock ED2 and do the OTA to EE4. This time I installed this deodexed EE4 first, rather than installing the kernel first to see if that made a difference. After installing this deodexed EE4 once again, it went back to the default android recovery. After reinstalling CWM, I once again got the same error of "Can't mount /sdcard." This is a problem since I am no longer able to do any updates in CWM.
This EE4 deodexed ROM will boot, but I have problems accessing the SD card when hooked to the computer. It can't read many files, and won't write at all. I have no problems accessing the SD card outside of this ROM.
Any help or suggestions are greatly appreciated!
Click to expand...
Click to collapse
I have the same problem. Does anyone have a solution to this issue?

scamish76 said:
I have the same problem. Does anyone have a solution to this issue?
Click to expand...
Click to collapse
you could try mounting it manually in CWM under the mounts and storage option

unfortunately this didnt work. I decided to use imnuts debloated rom and then downloaded the deodexed rom for the apks that i wanted to install. This method seemed to fix the sdcard issue. I'm curious as to why flashing the deodexed rom would affect the scdard while the debloated rom works???
Thank you for helping anyway.

scamish76 said:
unfortunately this didnt work. I decided to use imnuts debloated rom and then downloaded the deodexed rom for the apks that i wanted to install. This method seemed to fix the sdcard issue. I'm curious as to why flashing the deodexed rom would affect the scdard while the debloated rom works???
Thank you for helping anyway.
Click to expand...
Click to collapse
if I'm not mistaken the deodexed roms were early packages that had an sd card write issue, the debloated one should include the fix, hence no issues
blazing through on my 4G Droid Charge

that must be it. Thank you for responding.

{ROM}{STOCK}{ICS} Rogers Official UXLF3 - UNTOUCHED - CWM5 flashable

THIS IS NOT A CUSTOM ROM. THIS IS STOCK OFFICIAL ROGERS ICS UXLF3 FIRMWARE. PLEASE DO NOT ASK FOR MODS, I HAVE PROVIDED THIS UPON REQUEST.​
INTRODUCTION
Click to expand...
Click to collapse
This is the Stock Official ROGERS/Samsung Released Firmware for the SGH-I727R (Skyrocket) based on Android Platform 4.0.4 aka ICS. It is targeted for:
* Anyone who wants to be on the stock release, doesn't want to use ODIN.
* Wants to build a custom rom, and needs an official base. (see post #2)...
* Or, you just want a baseline.
PACKAGING
Click to expand...
Click to collapse
Well it is Stock, untouched, except for the deodexing and zipaligned. Your kernel and radios will be updated as in the official update. The only thing I have left out is the recovery, and I can provide a flashable one later, if you really really want to be stock for any future OTA update. See the optional flash if you need busybox and su.
- DeOdexed as per my stringent process, no using Kitchen or any other nonsense. Every apk get's what it needs in the classpath.
- zipaligned.
- all ownsership and permissions exactly as in stock install.
- Untouched UXLF5 boot image (i.e kernel + ramdisk).
- Your radio/modem will be updated to UXLF3.
- [OPTIONAL] If you want to flash busybox/su see the ADD-ONS. This will effectively root your install.
- [OPTIONAL] If you want the modified boot.img that enables init.d scripts, bootanimation, insecure boot, then flash the boot.img listed in the add-ons
INSTALLATION
Click to expand...
Click to collapse
Pretty straight forward. The only requirement is you need CWM 5 and above (I have tested with the touch recovery). NOTE: THIS WILL WIPE DATA.
1) Backup, Nandroid preferred.
2) Download and Copy the ROM to your device. (Please make sure you check the MD5SUM, the dowload link has the correct one).
3) Copy any additional add-ons you want to your devices, internal or external sdcard.
4a) Boot into CWM recovery (remember that is the requirement).
4b) In your recovery format /system (in touch recovery it is under: "mounts and storage)
4c) wipe data and cache partition
5) Flash the ROM.
6) [OPTIONAL] If you want busybox and su (binaries only). This will ROOT your phone. Flash it now.
7) [OPTIONAL] If you WANT the modified boot.img (modified ramdisk + stock kernel) flash that.
8) [OPTIONAL] If you want to flash a *different* radio, flash it now.
9) reboot
DOWNLOADS
Click to expand...
Click to collapse
* [15-JUL-2012] CWM 5 Flashable Offifical ROGERS UXLF3 FULL STOCK ROM. PLEASE CHECK THE MD5SUM. THE LINK HAS IT. ROGERS-ICS-UXLF3-cwm5.zip
RECOVERY
Click to expand...
Click to collapse
WARNING I HAVE NOT TESTED THIS. OBVIOUSLY YOU NEED TO BE ON A CWM recovery
* [07-AUG-2012] CWM flashable Stock Recovery, obviously you will lose CWM after this. Download
ADD-ONS
Click to expand...
Click to collapse
* [10-JUL-2012] Busybox and SU binaries ONLY (you can download SuperSu or Superuser from the Play Store). busybox-su-pack-cwm5.zip
* [10-JUL-2012] UXLF3 modified boot image). This is basically the Stock UXLF3 Kernel with modified ramdisk image to support adb root/insecure/bootanimation. kernel-skyrocket-UXLF3-cwm5.zip
* [10-JUL-2012] RADIOS: Instead of listing everything here: my custom rom threads OP in the Radio Section has all the RADIOS, without RIL, so it is safe to flash. Thread Link.
ISSUES
Click to expand...
Click to collapse
Unless there is a flash issue, folks this is as Stock as it gets. This is NOT a CUSTOM ROM, see my other thread on ATT STOCK, I will post some modding guide there.

reserved
reserved

thx. this will come in handy.
+rep

thanks mohan,i can now post this in my post
remember i was talking to u about rooting a short while ago so i could post a tutorial, its done and they made it a sticky.
one question, is there a way to unroot without flashing stock
edit: im guessing that there is no stock recovery in this rom, making it a stockish firmware
edit: i answered my own question about unrooting, just delete su from /bin and /xbin directories

downloading

vincom said:
thanks mohan,i can now post this in my post
remember i was talking to u about rooting a short while ago so i could post a tutorial, its done and they made it a sticky.
one question, is there a way to unroot without flashing stock
edit: im guessing that there is no stock recovery in this rom, making it a stockish firmware
edit: i answered my own question about unrooting, just delete su from /bin and /xbin directories
Click to expand...
Click to collapse
Yup just deleting the binaries is enough to "unroot". I may update the op with the revert script (busybox and su) and the respective stock recovery, when i get chance..

mohan_kr said:
Yup just deleting the binaries is enough to "unroot". I may update the op with the revert script (busybox and su) and the respective stock recovery, when i get chance..
Click to expand...
Click to collapse
oh great, i just finished detailing a newb guide to explain a temporary unroot and permanent unroot methods, a script would of been easier to use, btw that su/bb file works like a charm on any firmware

kinda missed the touchwiz smoothness... too bad there isnt a 14 toggle compatible with this. hopefully one day soon.

NIKEstickER said:
kinda missed the touchwiz smoothness... too bad there isnt a 14 toggle compatible with this. hopefully one day soon.
Click to expand...
Click to collapse
Flashing the UCLF6 toggle zip worked for me.

Very nice work, Maybe I should give it a try lol.

i have installed this on my SGH-i727 ATT handset.
By far this rom gives the best battery and performance...
Thanks op...
But this rom is having shutdown/reboot freeze issue.
Embryo 4.1 is discharging battery than any other roms, otherwise it is also ok.

Can I use Twrp to flash this? Sorry for the noob question
Sent from my SAMSUNG-SGH-I727 using xda premium

i see in your op about providing a flashable stock recovery, can you, this guy fracked up his usb port and cant use odin to return to stock for warranty repairs

vincom said:
i see in your op about providing a flashable stock recovery, can you, this guy fracked up his usb port and cant use odin to return to stock for warranty repairs
Click to expand...
Click to collapse
In the OP...

I would just like to ask if I would lose my root if I flashed this?

Crinkypops said:
I would just like to ask if I would lose my root if I flashed this?
Click to expand...
Click to collapse
YES

One last thing: Will the 15-toggle mod work for this ROM? Because I have heard of success from others and I just wanted to confirm with you, the dev.
Sent from my SGH-I727R using xda premium

Hi mohan,
Is there any way you could do the same for Rogers GB? It would be a great help for me. As ICS is crap I get RR and freezes. It doesn't get the right time zones and etc.

Incredible rom! Just had my skyrocket for 2 weeks, flashed 5-6 jb roms, vincoms the best imo, seanscreamz close behind.
I thought I'd come back to stock for a couple reasons. One, to get a baseline and see how good stock Rogers ics is battery wise, two, I can't seem to get nfc figured out and want to see if stock will do it. A co-worker has a stock ics sgs3, we can transfer apps, web addresses etc., but where he transferred a feature film to a different co-worker with a stock Rogers ics sgs3, via nfc in about 30 seconds, it fails with my skyrocket. I notice that their phones have sbeam in addition to nfc and android beam, maybe that's the difference. But I was wondering if there's issues transferring between ics and jb?
Thanks!
Sent from my SGH-I727R using xda app-developers app

Sorry to double post but I thought this would be as good a place as any to post this. Went in to Rogers today to get my lte SIM card, to my surprise they didn't even charge me! I can't believe these speeds the screen shot shows the speed is double my Wi-Fi speeds at home! And look at the comparison to the 3g or H+ too, that's just sad. I'm expecting to pay for it battery wise but I can live with that for these speeds!
Sent from my SGH-I727R using xda app-developers app

[ROM BML GB 2.3.6] HebrewBarebone

What is it ?
Plain BML stock Gingerbread 2.3.6 AntonX Barebone ROM.
Deodexed, so can be applied with tweaks.
Fully added Hebrew translation (in addition to English), applied with Right-To-Left tweak (when needed).
Debloated : WiFi Calling, T-mobile my acount and my device, Talkback, ThinkDroid Office, Android Keyboard (put Samsung keyboard instead), Voice dialer.
Added : Audio DSP Manager, Memo, Sidekick KD1 modem, ICS boot animation.
Optional Odexer script attached.
Why ?
If you speak Hebrew and you want the latest stock firmware for SGH-T959V with full Hebrew support and UI, this is the ROM for you.
To get even faster results flash the odexer script right after the ROM and you'll get your ROM odexed.
It should be more stable, clean and reliable than HebrewValhalla.
Oh, and WiFi tethering, TV Out, soft keys - all work...
How to apply
Requires BML file system with GB bootloaders.
If you're on MTD file system (CM7/ICS/JB) or Froyo - use Heimdall One Click back to stock with Root and flash via CWM (followed by the odexer script).
Please note : if you booted to the deodexed ROM without flashing the odexer script later
and you want to odex the ROM now - wipe dalvik cache before applying the odexer.
Hebrew Instructions - http://iandroid.co.il/forum/post491182.html#p491182
Downloads
Hebrew BareBone ROM
Odex-Your-ROM
Credits:
AntonX - Barebone ROM.
eollie - One Click Heimdall package.
Ericwgarza1 - Odexer script.

Tried to flash your rom like this :
1. flashed stock kg4 via odin
2. rebooted
3. Flashed AntonX 1.1.3 kernel via odin
4. Rebooted while partition were converted
5. got into cwm and flashed your rom
Wifi does not work. Tried it AT LEAST 3 times.
Please advise,
Thanks
Update : also tried it with the KJ6 you posted on iandroid and the wifi still doesnt work
The wifi DOES WORK with stock rom
Update #2 : flashed antonx 1.1.3 barebone rom with the rtl patch i kept from while ago and the wifi works
BTW after flashing the Heimdall package - in it's CWM menu you cant delete dalvik cache (it like fast reboots/restes the CWM mwnu)

Just checking... have you tried flashing the rom again after wifi fails?

Hi
Yes, But not on top of the non wifi working rom, but of fresh stock rom installation

Reflash it on the non-wifi working. Sometimes the wifi module doesn't flash quite right the first time, and it takes another go. Since everything else basically sticks around, as long as you don't wipe between your non-wifi-working and the reflash, sometimes that makes it work... when that happens, it usually ends up being that your recovery turned off the system mount before it actually was done. Oops.

Hi Fish
I have been using this ROM for weeks. You are doing things wrong. Leave Odin aside.
Use Heimdall package posted in OP (verify everything works) and just flash the ROM (you can skip the Voodoo lagfix procedure, it's automatic).
It will all be to your satisfactory.
sent from me

itzik2sh said:
Hi Fish
I have been using this ROM for weeks. You are doing things wrong. Leave Odin aside.
Use Heimdall package posted in OP (verify everything works) and just flash the ROM (you can skip the Voodoo lagfix procedure, it's automatic).
It will all be to your satisfactory.
sent from me
Click to expand...
Click to collapse
Ok Itzik,
Although i did it, I will do it now once again and will let you know wazzup.
Update : After flashing heimdall - wifi does not work Will try to flash some other stock or find other rom as a base
Update 2 : I give up for now.I'll try to make the cm9.1 work since it's really frustrating to me and I can mess too much with the phone and miss sms and calls. maybe will try it late at night in one of the upcoming days.
Thank you

Hi Fish
OK, we know now that the ROM is not the problem. I'll tell you what you can do; try to remove the battery, press the power button for 10 seconds and then leave phone untouched for 15 minutes. Return the battery and get to download mode.
Now make a 2 steps Heimdall. The one by Lumin (stock unrooted) and the AntonX kernel Heimdall package. Verify that you have WiFi and flash this ROM (followed by the odexer). Good luck!
sent from me

Well....What i did is :
1. Flashed stock KG4 2.3.6 rom via odin
2. rebooted system
3. Flashed Antonx 1.1.3 Kernel via odin
4. Rebooted
5. Flashed via CWM one after the other : anotnx deodexed 1.13 rom AND 0.93 hebfix patch itzik2sh made a while ago which i kept
Now it's on antonx 1.1.3 rom + hebrew support and wifi WORKS

Hi Fish
You keep doing things not according to instructions and what you post here is not even this ROM.
This ROM is full UI Hebrew enabled, already includes RTL fix and I do not recommend using Odin any more.
You can now take a nandroid backup and flash this ROM (and odexer), otherwise I don't see the relevance of this post.
sent from me

itzik2sh said:
Hi Fish
You keep doing things not according to instructions and what you post here is not even this ROM.
This ROM is full UI Hebrew enabled, already includes RTL fix and I do not recommend using Odin any more.
You can now take a nandroid backup and flash this ROM (and odexer), otherwise I don't see the relevance of this post.
sent from me
Click to expand...
Click to collapse
I'm sorry if i strayed away from the subject, But the reason i'm posting what i did is because what was suggested didn't worked for me and I wanted people that experienced the same problem to know i found a solution.
Thank you for your help

fish72 said:
the reason i'm posting what i did is because what was suggested didn't worked for me and I wanted people that experienced the same problem to know i found a solution.
Thank you for your help
Click to expand...
Click to collapse
Hi Fish
You said the problems you had came on Heimdall flash, even before ROM flash itself.
fish72 said:
Update : After flashing heimdall - wifi does not work
Click to expand...
Click to collapse
Then, You say what "worked" for you is flashing another ROM after an Odin..
fish72 said:
Now it's on antonx 1.1.3 rom + hebrew support and wifi WORKS
Click to expand...
Click to collapse
So, I saw no relevance to that post, unless you now back up and flash this ROM (and optionally the odexer), as I already suggested and find a problem there.