Firon was nice enough to make sweet sweet magic. if im right, this will let you update to DI18 if you are on a custom rom/kernel and it will "do the deed" for you.
Firon said:
Here's a signed update that will not trash your recovery, kernel, or root. You do not need a stock kernel for this update.
It will restore only the required stock files/apps and update your modem, so as long as you're on DI07, it should successfully update.
I tested it already on my own phone, worked great.
This way you don't need to restore a bunch of random files to update.
His thread can be found here
Click to expand...
Click to collapse
Only use the attached .zip if you are fully stock!
so i pulled a copy of the DI07 to DI18 update off of my cache partition. anybody want it to mess with?
*edit*
no changes have been made to it. ill let someone else which more adept skills do what they do best. I simply just got the notification, grabbed it from cache and threw it up here.
*edit2*
gotta be 100% stock (minus clockwork)
simple fix? Flash This before you flash the update.
Would it install on its own? If so throw it up here.
Sent from my SPH-D700 using XDA App
Thanks. Installed just fine.
In regards to the upload speed fix alone (not tested much else yet):
DL UL
65 101
294 241
63 162
95 197
Well...those numbers suck but it does prove that the UL is no longer stopping below 170 UL (my highest ever). Will test later, too.
I went outside and ran it a couple more times and it's looking good.
DL 474, 959 UL 322, 241
Thanks, installed fine for me. Upload is still ify.
Sent from my SPH-D700 using Tapatalk
It installed fine for me. Still doesn't seem to be working right.
Do i have to install all my stuff again to install this? And is this the real update?
First off this is my first android phone and this is one heckuva community ! Still hadn't gotten any OTA update so I installed with this one. Installed perfectly with clockworkmod, speedtested on two different servers and it seems to have fixed the problem! Sending that screenshot to my e-mail was also much less painful Thanks newkidd!
davidrules7778 said:
Do i have to install all my stuff again to install this? And is this the real update?
Click to expand...
Click to collapse
i guess i should have said, this is the OTA update. no changes have been made to it. ill let someone else which more adept skills do what they do best. I simply just got the notification, grabbed it from cache and threw it up here. just trying to do my part
davidrules7778 said:
Do i have to install all my stuff again to install this? And is this the real update?
Click to expand...
Click to collapse
Yeah ull need to have the stock apps and odex files or wait for someone to take this and make ita zip file we can just flash through clocworkmod. I tried it and it aborted after it didn't find some odex file ...
Sent from my SPH-D700 using XDA App
Does this effect root or cwm? I'm unrooted at the moment because i only use root to remove apps, which would have pointless because i wanted this.
Guys, please report battery life with this update in the next few days. I know DI07 greatly reduced it (due to that DRM service it seems), but I'm hoping this one is better.
spitefulrain said:
Does this effect root or cwm? I'm unrooted at the moment because i only use root to remove apps, which would have pointless because i wanted this.
Click to expand...
Click to collapse
My root was kept through the update. I was running on stock with just joey's root fix and it is still rooted after the update.
I haven't rebooted, but I suspect I may have to reinstall recovery, though, because when I looked in the update.zip, they had the recovery-install in there again. Not confirmed, though.
The update came in OTA for me about 10 minutes ago. I went ahead and applied it, and with about 5-10% left on the status bar at the bottom (during the Updating modem phase) it seems to have hung. Most of the 10 minutes has been stuck in that spot. I'm afraid to pull the battery and brick it, but on the flip side it's doing me no good if it's just sitting here like this permanently, either. Anyone else see anything similar?
And I am currently running completely stock and NOT rooted, so I should be the perfect target candidate for the update. Haven't had the time or need yet to make those changes.
Worked beautifully. Make sure you flash back to stock DI07. This will delete your clockwork recovery, but not your root script.
It works
Installed using stock recovery (i.e. signature verification works).
I used noobnl's zip dump of DI07 to restore files I had removed/replaced.
I applied this update without removing root and had root after updating. (Verified with titanium as well as terminal emulator by running commands $su, # remount rw /system) note that I had replaced the oneclick busybox with titanium's download to keep it happy.
Note: I had rooted at DI07 since I used ODIN at this point in the past, so I was using a newer version of the one-click root.
3G speed test results:
Ping (ms)/Down (kbps)/Up (kbps)/Location
207/261/541/At my cubicle (top floor, but 500ft away from the nearest exterior wall/window)
325/307/547/In a breezeway (also top floor, exterior windows on both sides)
EDIT:
172/675/699/Courtyard ~100 feet from nearest building under a tree.
Still looking like upload is faster than download in my area... but it's definitely fixed.
Also: here's my tethered results (from my cube)
It doesn't affect root - I was rooted before and I still am. First thing I did once the update installed was remove junk apps after having to put them back for the update to work.
Recovery seems to be gone, though. I installed it through clockwork but I just tried booting into recovery again and it brought me to the stock recovery. So it seems you'll have to reinstall clockwork if you apply the update.
Speed test results are atrocious, but that's the norm in the middle of the day near my office. This morning I had 725/146, but I've run three tests since then, all AFTER applying the DI18 update:
82/10
283/16
221/29
Yes, 82/10. You read that right. That is what 3G is like where I am sitting right now. But I have 4G here so it doesn't matter. And 3G seems to be a little better in other places. I will test again in a different area and see if this improves uploads.
I take it from all of these positive responses that nobody else experienced it hanging near the end of the flash process?
Anyone with experience have any recommendations on what I do?
I just tried to flash this using clockwork, didn't like that I have the Galaxy MobileAP installed and not the Sprint one and aborted. Will have to wait until somebody else releases a version that will work anyways.
TurboFool said:
I take it from all of these positive responses that nobody else experienced it hanging near the end of the flash process?
Anyone with experience have any recommendations on what I do?
Click to expand...
Click to collapse
Pull the battery and flash to stock using odin would be one option.
FrumRoll said:
I just tried to flash this using clockwork, didn't like that I have the Galaxy MobileAP installed and not the Sprint one and aborted. Will have to wait until somebody else releases a version that will work anyways.
Click to expand...
Click to collapse
EDIT: see Firon's post on page 6 (#53) it will restore any modifications you've made (including MobileAP) as long as you have a stock (odexed) DI07 ROM, it won't even mess up recovery or kernel!
FrumRoll said:
Pull the battery and flash to stock using odin would be one option.
Click to expand...
Click to collapse
Unfortunately I'm nowhere I can do that right now. Also, won't that kill my data?
Related
I'm new to rooting and just rooted my Droid 2 Global and have no idea what to do next. Where do I find roms? What are the best ones? And how can I get rid of some of this junk moto has on here?
Google team defuse
Sent from my DROID2 GLOBAL using XDA App
I'm sorta new to this too. I rooted with Z4Root. I'd recommend going to the market and downloading Root Uninstaller. That helped me get rid of all the stupid crap verizon put on there, like Blockbuster, Kindle, CityID, etc.
Another thing you could do is look up "root" in the market. It will show you all the apps that require root access.
Becareful though, just like your home computer, uninstalling some software may have unintended consequences. Hope that helps.
marcort said:
I'm sorta new to this too. I rooted with Z4Root. I'd recommend going to the market and downloading Root Uninstaller. That helped me get rid of all the stupid crap verizon put on there, like Blockbuster, Kindle, CityID, etc.
Another thing you could do is look up "root" in the market. It will show you all the apps that require root access.
Becareful though, just like your home computer, uninstalling some software may have unintended consequences. Hope that helps.
Click to expand...
Click to collapse
Thanks a lot. Has anything you uninstalled caused you problems?
Not yet. But I only uninstalled the factory installed extra stuff. I noticed a slight pickup in speed and battery life (although it could just all be in my head... LOL). Let me know if you do anything else cool. Im still trying to build up enough balls to actually start flashing roms.
marcort said:
I'm sorta new to this too. I rooted with Z4Root. I'd recommend going to the market and downloading Root Uninstaller. That helped me get rid of all the stupid crap verizon put on there, like Blockbuster, Kindle, CityID, etc.
Another thing you could do is look up "root" in the market. It will show you all the apps that require root access.
Becareful though, just like your home computer, uninstalling some software may have unintended consequences. Hope that helps.
Click to expand...
Click to collapse
This is a bad idea, don't do it.
When you delete the bloatware that comes on the phone, you make your phone unable to receive OTA updates from Verizon. This includes any future updates to Android version 2.3 (Gingerbread). The updates run as a patch, they check for all of the system data to be present. This includes pre-installed apps like blockbuster, amazon, etc. If ALL of the system data isn't present, the patch can't run.
Instead, you should use Titanium Backup to freeze these programs. It does the same thing, but instead of removing the files, it changes their extension, so that they can't run. It has the same effect, but when you want an update, you just unfreeze your programs, update, and then refreeze them. It also lets you make backups of your apps and app data.
If you don't want to pay for TiBu, you can always manually change all the filenames from cityID.apk to cityID.bak, etc etc. This does the same thing, for free, but is more involved and less beginner friendly.
Do what ever you want......if you want to go back to stock to get offical ota updates just search for the sbf file and your all good. Just know what your doing before you do it. If you delete bloatware it will effect ota updates. But flash the sbf with rsd lite and you'll be fine
Sent from my DROID2 GLOBAL using XDA App
You could do that, yes. But freezing bloatware is more efficient. Flashing an SBF is more time intensive, and has a higher chance (not high, mind you, but highER) of not working correctly. Also, TiBU has the added benefit of being a backup utility that's easy to use and very functional and stable.
Ok.
Sent from my DROID2 GLOBAL using XDA App
Well I guess that shows how much of a dummy I am with this stuff. I ended up reinstalling the stuff I removed from the market and unrooting because I had to send the phone back. It had a really weird charging issue that was present when I bought it. Im on the new one now. (Rooted to try and fix the charging issue. It didnt work). I haven't rooted the new phone yet. Im reading through all the forums to try and gain a little better understanding of how to do this stuff without wrecking my phone or missing out on updates. Thanks for all the good info! I wont be screwing around with bloatware so soon this time.
Definitly do not go the uninstall route on the Blur stuff.
Freezing is better!
As for ROMs there is only one ROM that I know of and it is Fission.
Get the ROM manager here at XDA and flashing it is a snap. It even has the Stock Droid in the manager so you can easily go back to stock when needed.
The stock rom in the rom manger still has root, busybox and is deodexed. If sent back with these programs on it will void your warranty. So if you ever need to send back sbf 1st to be safe. The .sbf takes like 15 minutes. Maybe two minutes more then flashing a ROM. So I really don't get how flashing a .sbf is difficult. And it actually is the safest due to the locked bootlader and the drivers usually never fail if running Windows 32 bit.
so i'm assuming that all of the other "popular" ROM's (liberty, rubix, apex, etc.) that say they are for the DX and D2 wont work on the D2G? I've installed many ROM's on my D2G and all of them get stuck on airplane mode and wont unlock. I end up having to restore and revert back to stock...
Yep, pretty lame that all these devs havent taken numerous peoples' offers to test out d2g ports of the d2 roms. i mean i have no idea how to port it myself but theres people saying "if you try it, ill test it" and still no devs take anyone up on the offer.
So does ne one think that we are going to get ne roms ported over to us from the dx or the d2 cuz I was lookin forward to flashing liberty to my D2G so can some1 pm if they got ne idea or if they kno when we can expect a new rom
Sent from my DROID2 GLOBAL using XDA App
D2G Rooting
Hey Guys- I just rooted and installed Fission ROM on my D2G- WHEW!! My wife (the IT pro) and I rooted this past Sunday evening. We used Z4ROOT- this part was fairly easy. Then we spent the next 6 hours- with no luck whatsoever- trying to install a custom ROM. We finally found out that there aren't many out for the D2G just yet.
We finally found Fission ROM, but could not get it installed. You must have a bootstrap program to install the rom. I found this out by accident. Finally installed Fission on Tuesday night. Only used for a few hours, but so far so good.
BTW- there are several bloatware freezers on the market. I had read not to remove it, so I froze it. App Freezer for Root seems to be working fine.
Be careful, and good luck!
biknut1 said:
We finally found Fission ROM, but could not get it installed. You must have a bootstrap program to install the rom. I found this out by accident. Finally installed Fission on Tuesday night. Only used for a few hours, but so far so good.
Click to expand...
Click to collapse
There are instructions with everything you need to know (including koush's bootstrap) provided by team defuse on their website. The entire process shouldn't take more than 30 minutes tops.
And you can delete anything you want now that there is the D2 global SBF for recovery. Just make sure you know how to use it before things go awry so you don't panic and flood the forums with questions that have already been answered.
Sent from my DROID2 using XDA App
pfallin said:
so i'm assuming that all of the other "popular" ROM's (liberty, rubix, apex, etc.) that say they are for the DX and D2 wont work on the D2G? I've installed many ROM's on my D2G and all of them get stuck on airplane mode and wont unlock. I end up having to restore and revert back to stock...
Click to expand...
Click to collapse
how do you revert back to stock. yes i made a backup.
How do you get the OTA Update? I mean, you have to be on Verizon to get it, right? What if you unlocked the phone and use it outside the US with a different sim card from some other carrier? Can you still get the update? Please help.
And, if somehow I can find this precious update, then if I change my rom to Fission, I won't get updates anymore, right? Then what is the point of getting new roms? I'll have to be checking for newer roms with newer updates from Verizon all the time? Is this the idea?
Thank you,
hgrimberg said:
How do you get the OTA Update? I mean, you have to be on Verizon to get it, right? What if you unlocked the phone and use it outside the US with a different sim card from some other carrier? Can you still get the update? Please help.
And, if somehow I can find this precious update, then if I change my rom to Fission, I won't get updates anymore, right? Then what is the point of getting new roms? I'll have to be checking for newer roms with newer updates from Verizon all the time? Is this the idea?
Thank you,
Click to expand...
Click to collapse
Yes, you can get the update, no matter you are not on Verizon network. But update will not be 'pushed' to you, you have to go to system/about phone/system updates. Phone will check for update and let you know if one is available. If you are already running 2.4.330, you will get prompt no update is available. If you are on 2.4.29 - you must get the prompt update is available and will be downloaded.
Update will work only if you are using stock firmware (for me it worked fine no matter I had rooted the phone, you must make sure there are no 'frozen' apps before update is applied, or it will fail to install). On Fission, it will not show/work. Many users, including myself, have reported update does not seem to be adding anything benneficial to users on GSM/UMTS networks. On some networks (in Canada and Australia so far) update causes the phone to become unreliable when it comes to keeping connection to the cellular network. Another user (in Germany) reports no problems using the updated firmware. I suspect this is related to frequencies - in Canada and Australia we use bands that overlap with US bands which as we all know have some software restrictions imposed by the phone. In Europe (Germany, Greece) you guys use 2100Mhz.
Again - update addresses some CDMA issues, I find absolutely no different with/without the update in terms of battery life or call quality. (I am on Rogers Canada - GSM/HSPA 850/1900.)
Hi All,
I'm probably one of the few here who is still using HoneyComb instead of ICS on my Xoom. I've been on 3.2.4 for some time now, and started getting the 3.2.6 update notification which I blew off until the other day when I said screw it, I'll update and go through the trouble of re-rooting, etc.
However, I attempted to use Solarnz's universal root method which I've used numerous times before and never had an issue with until now. So after pushing the recovery.img via Fastboot, everything appears to have been completed just fine, except when I reboot into recovery I get the damn android with an error.
I've tried pushing a few versions of recovery and each time it seems to work just fine, but again on reboot, I can't get into recovery like it never got pushed or somehow has been erased. I can even revert back to 3.2.2 and update to 3.2.4 and root and re-install clockwork no problem. But I keep getting that damn update notification every 5 mins, and I'm sick of it, hence why I bothered to update in the first place.
I know most people have by-passed this altogether by jumping to ICS, but I've had too many issues with the beta ICS versions out there (WIFI handoffs and disconnects mostly) and need to reliable daily driver vice ICS goodness (fortunately I have a GNex for that).
Anyway, since I hadn't seen much on this, I decided to post and see if its just me, or if this really is an issue?
I can probably go old skool and use the manual root method of pushing the SU files via ADB, but something isn't right here, and I wanted to get some feedback.
Thanks
DANOinSD said:
Hi All,
I'm probably one of the few here who is still using HoneyComb instead of ICS on my Xoom. I've been on 3.2.4 for some time now, and started getting the 3.2.6 update notification which I blew off until the other day when I said screw it, I'll update and go through the trouble of re-rooting, etc.
However, I attempted to use Solarnz's universal root method which I've used numerous times before and never had an issue with until now. So after pushing the recovery.img via Fastboot, everything appears to have been completed just fine, except when I reboot into recovery I get the damn android with an error.
I've tried pushing a few versions of recovery and each time it seems to work just fine, but again on reboot, I can't get into recovery like it never got pushed or somehow has been erased. I can even revert back to 3.2.2 and update to 3.2.4 and root and re-install clockwork no problem. But I keep getting that damn update notification every 5 mins, and I'm sick of it, hence why I bothered to update in the first place.
I know most people have by-passed this altogether by jumping to ICS, but I've had too many issues with the beta ICS versions out there (WIFI handoffs and disconnects mostly) and need to reliable daily driver vice ICS goodness (fortunately I have a GNex for that).
Anyway, since I hadn't seen much on this, I decided to post and see if its just me, or if this really is an issue?
I can probably go old skool and use the manual root method of pushing the SU files via ADB, but something isn't right here, and I wanted to get some feedback.
Thanks
Click to expand...
Click to collapse
Depending on what ROM your flashing if your trying to do the update from OTA then you have to have a 100% no bloatware removed rom, my suggestion is to download the one @ motodev and then flash 3.1 and update all the way to ICS (if wanted) otherwise I believe that when you get the (!) in recovery you can press once pwr+up fast (don't hold) and it will display the recovery window with the error message that's preventing you from upgrading.
after flashing the recovery, did you reboot into android and then into recovery? if yes, don't!
you have to reboot into recovery right after flashing the recovery.
Hi All,
Thanks for the feedback, I finally got recovery pushed and booted, along with root on 3.2.6.
As llama points out you must reboot into recovery upon rebooting from fastboot. I don’t believe this was a requirement previously. But once I did that, all was fine.
I’ve done this a thousand times before and even in my old notes I couldn’t find any reference to booting into recovery immediately after pushing the recovery.img. Is this something new with this update or has it always been this way? Call me crazy, but I can’t ever recall scrambling to catch the reboot and get into recovery before re-launching Android. I always rebooted in Android and made sure it actually loaded to ensure something didn’t get hosed, then I would reboot into recovery and flash the root zip.
DANOinSD said:
Is this something new with this update or has it always been this way?
Click to expand...
Click to collapse
as far as I know, this is a 'feature' introduced with every ota-update. To my knowledge: get a xoom from a store and flash recovery right away-> everything is good; have the xoom install an ota-update and flash recovery afterwards -> do it this way
So I wasn't paying attention when I got the message from AT&T about the update being available, and I forgot that I had rooted my phone. I downloaded the update and it attempted to install, but I got the little android guy and the triangle with an exclamation point in it to let me know that there was no operating system installed. After a moment of panic, I was able to restore using CWM. But now I have this persistent notification at the top to let me know that the download is ready to install, and the clear notification button will not eliminate this particular notification. Any idea how to get rid of the nagging symbol or even delete the download altogether?
issues with att update.
kriswilliams03 said:
So I wasn't paying attention when I got the message from AT&T about the update being available, and I forgot that I had rooted my phone. I downloaded the update and it attempted to install, but I got the little android guy and the triangle with an exclamation point in it to let me know that there was no operating system installed. After a moment of panic, I was able to restore using CWM. But now I have this persistent notification at the top to let me know that the download is ready to install, and the clear notification button will not eliminate this particular notification. Any idea how to get rid of the nagging symbol or even delete the download altogether?
Click to expand...
Click to collapse
I had the same issue from att. I decided to get an ICS based rom. I decided on Virtuous infinity alpha2. was good but choppy and had a few small but annoying bugs. then i went for the alpha 3 rom with the inspire patch and everything works great. you do have to wipe phone and clear cachs. this did fix my issue as well i suggest getting ram manager pro. it helps the phone run much smoother. http://www.virtuousrom.com/ is their website. great site. Again Do Not forget the inspire patch. you can find both here http://rootzwiki.com/topic/30873-virtuous-infinity-v1330-alpha3-general/ the patch for camera fix is under the alpha 2 version.
Spaz84 said:
I had the same issue from att. I decided to get an ICS based rom. I decided on Virtuous infinity alpha2. was good but choppy and had a few small but annoying bugs. then i went for the alpha 3 rom with the inspire patch and everything works great. you do have to wipe phone and clear cachs. this did fix my issue as well i suggest getting ram manager pro. it helps the phone run much smoother. http://www.virtuousrom.com/ is their website. great site. Again Do Not forget the inspire patch. you can find both here http://rootzwiki.com/topic/30873-virtuous-infinity-v1330-alpha3-general/ the patch for camera fix is under the alpha 2 version.
Click to expand...
Click to collapse
i too had a brief lapse inn thinking and did the same thing, is there any way to get rid of the notification that anyone knows of, or how to update? (it's been a good bit since i've been on here and rooted my phone)
try this rom is...it might help you out
http://forum.xda-developers.com/showthread.php?t=1778202&page=811
I second this, this rom makes the phone live up to my expectations.
The Remedy said:
try this rom is...it might help you out
http://forum.xda-developers.com/showthread.php?t=1778202&page=811
Click to expand...
Click to collapse
So it look like the JB OTA update is here for the USA. Mine is rooted, and has already download the update, but I haven't applied it yet, as I'm rooted and I don't know if I have to do something special first.....
Any one have any info on this?
Same Boat !!
Me too in same boat with P3113.See the post below yours :crying: Hope experts replies soon.
I went ahead and installed it on my daughters tab. CWM protected itself, and root. I'm still poking around, but thus far no issues beyond it says "update failed" but clearly didn't.
I'm wondering if I should remove CWM and unroot it first...
Run a nandroid real quick, back it up to your computer, and let 'er rip. Like I said, it's working perfectly for me. Then again my daughter is 7, so losing all her data isn't really a problem.
Updated with Root ?
sheepdog elite said:
Run a nandroid real quick, back it up to your computer, and let 'er rip. Like I said, it's working perfectly for me. Then again my daughter is 7, so losing all her data isn't really a problem.
Click to expand...
Click to collapse
So if i understand correctly , you allowed the OTA with root and it wiped data ? I am suprised it installed with Custom recovery !!!
I have over 200 user apps. Will i retain those Apps (dont mind data being wiped)
No, it didn't wipe data. I wasn't worried about it "if" it did, because it's my daughters, and I have TIBU for all her games from like last week.
Just to be perfectly clear. NOTHING went wrong. It installed the new O.S., booted fine, said the update failed, but the update didn't fail. Probably because CWM preserved root, and bootloader, so verification failed.
I ran it..... It updated thru CWM... Once done said update failed, but I had a new agreement to agree too. Sys info says its running 4.1.1.
If I have and issue, ill update here.
Failed for P3113
Based on your experience thought I would try too... Unfortunately failed miserably... I have Cwm 6.0.2.3 and attached is the crash log... Maybe some experts can give their views..
I guess I'll post my successful config just for the sake of comparison.
I'm currently running CWM 6.0.1.1. The tab was rooted with a file called gtab2_jellybean_rooter (think I got it from XDA, but i'm not positive) and had no other modifications/roms/etc.
If you're running any sort of ROM you're definitely boned, gotta wait for a ROM update. Beyond that, I'm not really sure what to say
To do the proper update, you should un-root and then re-root once done. That way you get the full support with your update if needed.
I am rooted, running CWM 6.0.2.3. I accepted the update and hit the install thinking that it would fail just as it does on a rooted SIII. The notification said the install had failed, but as others here have indicated, it appears as though the install was successful. I retained root and all seems to be normal; with one exception: It appears that the Tab no longer "sleeps" but shuts down completely. Regardless of whether I turn it off with the power button (short press) or if the screen simply goes to sleep, I have to long press the power button and it goes through a full boot.
Is anyone else experiencing this? Is there a setting I am missing? I am not a noob at rooting, etc. as I have been doing it since my OG Droid on Verizon, but it surprised me when the update seemed to install (even Google Now is working), and I am stumped about this "shut down" that seems to happen.
I experienced the same thing. I was rooted and had installed CM10, went back to original backup, using latest CWM. I hit system update and it downloaded the update, asked me to continue. CWM asked me if I wanted to install unsigned zip, I accepted, and it went through. At first boot it said update failed, but like everyone else, it went through. I have had no issues at all. My tab goes to sleep correctly.
Have peace in mind.
I finished updating (unfortunately, the battery was 9%, so I had to wait for an hour to charge before doing anything) and I got "failed" error like everybody got, but the system shows 4.1.1 and the performance is improved, and I applied root again.
This is the stock US KitKat ROM for The Galaxy Tab 3 7" Tablet. Finally found it after a bunch of hassle online, and figured I'd post it here to make things easier for everyone.
When I Odin'd this ROM, it actually upgraded my tablet, and left all my items installed (not guaranteeing this will work the same for everyone else).
Afterwards, I just Odin'd TWRP to reroot using Chainfire's SuperSU (no other Superuser would work) and called it good.
Caution: if you are using a custom ROM, this may not work without reflashing stock 4.1.2 since the 4.4.2 ROM appears to be an update, rather than a full ROM.
Rooted devices and custom kernels that are otherwise stock should be fine.
The cache, and if possible dalvik-cache should be cleared before flashing. Some of those files can sometimes interfere with upgrades.
It might be necessary to pinpoint apps that are force closing, uninstall and reinstall them. Some apps, particularly paid apps, store their data differently on KitKat, and will automatically fail as a result.
If that fails, it might be necessary to factory reset the device.
The Stock 4.1.2 ROM for the T210R is available here: http://forum.xda-developers.com/gal...-stock-sm-t210r-4-1-2-jellybean-odin-t2958676
The T210R...XAR file is for the 210R:
https://drive.google.com/open?id=0B2iEgzRTFjrQTmI0ZjRBbWtOajQ&authuser=0
The ITV file is for the T210 (no R)
To download these ROMs, a torrent client is required (such as utorrent).
Anyone who wishes to contribute, please seed if you can after downloading ("Force Starting" the torrent will seed it indefinitely.)
Can I flash this on the SM-T210?
john410 said:
Can I flash this on the SM-T210?
Click to expand...
Click to collapse
I've seen both devices referenced together quite regularly, implying that they use the same ROM.
http://www.boeboer.com/samsung-galaxy-tab-3-7-sm-t210r-manual-guide-wifi/
And even use the same kernel from what I've read:
http://forum.xda-developers.com/showthread.php?t=2439564
I would take standard precautions, such as having a odin image of your original software available and performing a backup of your current system (if able).
Perhaps someone else has some insight to this question?
edit: Looks like I had my information wrong. Found where I obtained the ROM from, it is for the T210R model, and was not intended for the T210.
There are custom ROMs that have been patched for use on both devices, which is where my confusion came from, but this is an official ROM.
I have gotten my hands on the T210(no R) ROM file, and have update the Links above.
I am not responsible for any failed attempts at flashing to either device.
Greaper88 said:
I've seen both devices referenced together quite regularly, implying that they use the same ROM.
http://www.boeboer.com/samsung-galaxy-tab-3-7-sm-t210r-manual-guide-wifi/
And even use the same kernel from what I've read:
http://forum.xda-developers.com/showthread.php?t=2439564
I would take standard precautions, such as having a odin image of your original software available and performing a backup of your current system (if able).
Perhaps someone else has some insight to this question?
edit: Looks like I had my information wrong. Found where I obtained the ROM from, it is for the T210R model, and was not intended for the T210.
There are custom ROMs that have been patched for use on both devices, which is where my confusion came from, but this is an official ROM.
I have gotten my hands on the T210(no R) ROM file, and have update the Links above.
I am not responsible for any failed attempts at flashing to either device.
Click to expand...
Click to collapse
First, thanks for this. I have the T210R. I tried using this and had the same result, it updated the tablet instead of loading a completely new version. I did however run into a problem...the tablet had many for closes and reboots to a point it was unusable and so I reverted back to my backup. Did you see this? Maybe I had a bad download?
[email protected] said:
First, thanks for this. I have the T210R. I tried using this and had the same result, it updated the tablet instead of loading a completely new version. I did however run into a problem...the tablet had many for closes and reboots to a point it was unusable and so I reverted back to my backup. Did you see this? Maybe I had a bad download?
Click to expand...
Click to collapse
I did not have this problem, but I didn't have much on my Tab either. (Some apps don't play well with KitKat upgrades.)
Torrents have multiple segmented hashchecks to make sure you get an uncorrupted download, but it might still be possible. I'm reasonably sure my file is OK since I've used it (can't speak for the non R file though).
Did you clear your cache, and if possible your dalvik cache? I've read that some of those files interfere with upgrades.
If you can pinpoint the apps that are force closing, uninstall and reinstall them. Some apps, particularly paid apps, store their data differently on KitKat, and will automatically fail as a result.
Other option would be to try a factory reset and see if that fixes it. (I understand not wanting to do that though.)
One more thing, if your ROM isn't stock, or stock rooted (custom kernel should be ok too), you may have to flash 4.2 before the 4.4 ROM will work on the device.
Right guys, here i go, just joined and first question!!!
i have not ever rooted a sm-t210 but it was rooted when i bought it second hand!
i have linux installed on my p.c. and was wondering if there is a way to upgrade to and official KITKAT!
as stated i am having problems because my SM-T210 wifi only! and want to update to kitkat official release!
but was hoping also that there is a way/method to root via LINX and not via windows!!
if that is not possible how do i go about it on windows!! as i can use a friends WINDOWS-P.C. if i must!
ah also my SM-T210 does not have the options to change the function of the USB-function,,,
i.e.
it used to have an option to,, use as a mass storege, media transfer or use with samsung keis,,, or some thing of the sort
but this option has dissapeared! may have been my fault!!!! as i uninstalled some system apps,
now it crashes and reboots whenever i try to turn of USB-DEBUGGING options in DEVELOPER-OPTIONS !!!!
many thanks in advance,
Void.Naught
void.naught said:
Right guys, here i go, just joined and first question!!!
i have not ever rooted a sm-t210 but it was rooted when i bought it second hand!
i have linux installed on my p.c. and was wondering if there is a way to upgrade to and official KITKAT!
as stated i am having problems because my SM-T210 wifi only! and want to update to kitkat official release!
but was hoping also that there is a way/method to root via LINX and not via windows!!
if that is not possible how do i go about it on windows!! as i can use a friends WINDOWS-P.C. if i must!
ah also my SM-T210 does not have the options to change the function of the USB-function,,,
i.e.
it used to have an option to,, use as a mass storege, media transfer or use with samsung keis,,, or some thing of the sort
but this option has dissapeared! may have been my fault!!!! as i uninstalled some system apps,
now it crashes and reboots whenever i try to turn of USB-DEBUGGING options in DEVELOPER-OPTIONS !!!!
many thanks in advance,
Void.Naught
Click to expand...
Click to collapse
I do know that Heimdall is a multiplatform flashing tool substitute for Odin. Check out
http://forum.xda-developers.com/galaxy-tab-3/general/root-sm-t210-r-using-heimdall-t2936061
for more info. Hope it helps.
thank you for finding and posting the correct files for this tab
hi i have a galaxy tab kid t2105 rooted, is it possible to install any other rom after 4.1.2?
Greaper88 said:
Rooted devices and custom kernels that are otherwise stock should be fine.
Click to expand...
Click to collapse
Just to triple check, by the above quote you mean that if my tablet is currently rooted, I should still be fine to flash this update correct? [obviously it would become non-rooted once flashed and I'd have to re-root it as you mentioned you rooted after installing]
Also, how much space does this take up?
thanks
~J
ubuntujason said:
Just to triple check, by the above quote you mean that if my tablet is currently rooted, I should still be fine to flash this update correct? [obviously it would become non-rooted once flashed and I'd have to re-root it as you mentioned you rooted after installing]
Also, how much space does this take up?
thanks
~J
Click to expand...
Click to collapse
That is correct. I was rooted running the Werewolf custom OC kernel. I still had my tablet upgrade without wiping, and one other user has reported back saying the same. But I can not promise upgrade as opposed to overwrite.
The flash file once extracted, is about 1.4 GB, I don't know sizes beyond that. It does not repartition the tablet however.
Greaper88 said:
That is correct. I was rooted running the Werewolf custom OC kernel. I still had my tablet upgrade without wiping, and one other user has reported back saying the same. But I can not promise upgrade as opposed to overwrite.
The flash file once extracted, is about 1.4 GB, I don't know sizes beyond that. It does not repartition the tablet however.
Click to expand...
Click to collapse
Awesome, thanks!
~J
Could you upload the T210 ITV file? This torrent is going to take 10 hours
No system file
Well this is awesome, system won't mount and I don't have a backup. Samsung website does NOT have the stock firmware, and attempting to get it for another country just to get this to load so I can flash a ROM leaves me with having to download at 15kbs. I am in the process of selling this to someone for their kid... And there are ZERO seeders for these files. Lovely.
Sorry, m'y post an error
ragnaroksangel said:
Well this is awesome, system won't mount and I don't have a backup. Samsung website does NOT have the stock firmware, and attempting to get it for another country just to get this to load so I can flash a ROM leaves me with having to download at 15kbs. I am in the process of selling this to someone for their kid... And there are ZERO seeders for these files. Lovely.
Click to expand...
Click to collapse
Are you looking for the Stock Rom?
Darthlord064 said:
Are you looking for the Stock Rom?
Click to expand...
Click to collapse
I am, can you help?
Greaper88 said:
I do know that Heimdall is a multiplatform flashing tool substitute for Odin. Check out
http://forum.xda-developers.com/galaxy-tab-3/general/root-sm-t210-r-using-heimdall-t2936061
for more info. Hope it helps.
Click to expand...
Click to collapse
For some (unknown) reason, Odin3 nor JOdin3 doesn't seem to work for flashing my Samsung Galaxy Tab3 device. For that reason I tried Heimdall-Frontend, but to make that work you need to extract the content of a stock ROM first.
Anyways, it still didn't lead to get my device into factory reset yet.
But that's another story on which I still have not yet found the answers needed to get the device successfully back into factory reset.
My guess is that the 'system.img' file, of Android 4.4.2, successfully has been loaded from Heimdall-Frontend, yet by going into reboot right away after Heimdall-Frontend releases the connected device, the download may be deleted.
I read that the cause of that may lie in the fact that Android 4.4.2 is only an update and no full ROM.