Database Info

[ROM] eViL De-SiRe Barebone A2SD v2.01 & Kernels [6/4/10]

First off, thanks to the team the fixed the USB bricks, Kubino99 et al.
Big thanks to Paul from Modaco for root and A2SD.
YOU MUST FIRST HAVE ROOT! FOLLOW THIS GUIDE TO GET SETUP.
CURRENT RECOVERY DOES NOT FORMAT DALVIK CACHE, IT IS BROKEN! USE LINUX OR PARTITION THE MEMORY CARD VIA RECOVERY!
To Flash via Linux, you will need to boot to Linux to get to Recovery
Code:
Root Method 1
1. Your device should now be off. Unplug the device from your computer.
2. Turn it on again while holding down the 'volume down' button this time. The screen will look similar to before, but will say 'HBOOT' instead of 'FASTBOOT'.
3. Use the volume buttons and the power button to select the 'RECOVERY' option. You should then see a screen with a red triangle - at this point, plug it into your Linux or OSX computer.
4. From 'push files' zip that you downloaded you'll see a file called 'recovery-linux.sh' or 'recovery-mac.sh'. Run the one appropriate to your operating system and the screen of your device should change to display the green recovery image menu.
5. In the recovery image (moving around using the optical trackball), select 'Wipe -> Wipe data /factory reset', wipe cache, wipe dalvik.
6. Then 'Flash zip from sdcard' and choose the rooted update. Confirm with the trackball and the update process will begin. It'll take a little while, so go make a nice cup of tea.
When the flash has finished, reboot, and you are DONE!
Code:
Root Method 2
1- copy the ROM .zip to your SD card
2- boot off Paul's .iso, perform the first steps in the tutorial, without connecting the phone; skip 'sudo ./step1.sh'
3- put phone in Recovery mode as indicated in the tutorial, and connect it to your machine
4- run 'sudo ./step2.sh', wait until you get the green screen with the recovery options on the phone
5- wipe data/cache/dalvik cache
6- install the .zip you copied earlier (leave rootedupdate.zip alone)
7- once flashing is complete, reboot the phone and... you're all set
Thanks cezarL
To get to Recovery via Windows, download and extract this to your adb/tools folder. You will use the recovery-windows.bat in the pushfiles folder for your step 4.(thanks to nilezon via afiorillo)
I also recommend wiping cache & Dalvik cache before flashing. CURRENTLY DALVIK CACHE CANNOT BE CLEARED IN RECOVERY. Use Linux or Repartition in Recovery!
To configure A2SD (thanks to afiorillo)
Code:
While in Recovery, using the optical trackpad, now select "Partition sdcard" -> "Partition SD" and issue a SWAP=0, EXT2=512, FAT32=<remaining> partition command (read carefully the instructions provided on-screen by the procedure, you'll have to use the volume keys too, here).
Find and issue the "SD:ext2 to ext3" command.
Go back to the Recovery Console main menu and select "Reboot system now". While rebooting, unplug the Desire from the USB port.
*Note that this will format your whole SD card. Make a backup before doing this if you need.
*All builds include stuffs from previous builds unless noted in the change log.
Froyo ROM's are here: http://forum.xda-developers.com/showthread.php?t=705606
Sense kernel - 2.6.29
uv/oc up to 1.26ghz
8mb hack
optimized
ext 2,3,4
netfilter
tun.ko
*Wipe may be necessary
Froyo kernel - 2.6.29
uv/oc - thx Richardtrip
autofocus fix - thx deovferreira
8mb hack - thx coolbho3k
Optimized settings
No ext support
no netfilter
Flash via recovery & oc via setcpu. (max 1.26ghz)
*Wipe may be necessary
v.06 Froyo Test
Updated Richard Trips kernel
Autofocus fixed
Optimized apks
Semi-themed - modded manup456's work
Added Vatch White clock
Removed Maps, Twitter & Amazon MP3
Issues: Video Recording does not work, don't even attempt to use it
v.05 Froyo Test
Not themed
Richard Trips Froyo Kernel
Busybox, fix_permissions, sqlite
Built-in Adblock
ADW Launcher
In-app wifi
APN Backup & Restore
Some tweaks, edits & other mods
Issues: Camera Auto Focus hangs (use infinte focus or it will slow the device down)
v2.01 Barebone - A2SD Optional
Port of my NXSOne ROM (Change Log here)
Uses Richard Trips OC/UV kernel (doesn't everyone?)
Changed battery icon to Droid guy
v1.2.4 Bare - Final (for now)
Added back HTC Contacts
v1.2.3 Bare - Removed for Now
Removed Eclair deskclock
Added Acer Liquid alarm
Added HTC World Clock *DO NOT USE THIS FOR YOUR ALARM
Issues/bugs:
If you have a SIM PIN, disable it or you will get "incorrect PIN code"
power menu "looks odd"
Possible FC with accounts/sync, and sync contacts will not be available (gapps) try this fix here
No Contacts - Fix here
v1.2.2 Bare
Removed D2C script.
On first boot, free space is 123MB on data. Does not rely on cache partition.
v1.2.1 D2C Bare - Dalvik 2 Cache
Odexed system apps, so more free space on data. (144 on data, 23 cache) - thx for the epiphany Kali-
Removed HTC Worldclock
Added Eclair Deskclock - able to dismiss alarm
ADW launcher Themed Froyo-like - thx @bakageta
v1.2 A2SD Bare - A2SD Recommended
A2sd will split to sdcard & data unless you don't use a2sd, which will only go to data. (however, there is only 100mb of free space) *working on that
Rebase off of r1 - thanks Paul (even though you never answer me ;P)
Removed HTC Lockscreen
Added Android 2.0 Rotary lockscreen
Added Percent display in battery - thanks kubino99 here
Added back wired tether - please test
Added vpn modules (ie. tun.ko, openvpn)
Added ADW Launcher - thanks AnderWeb here
Added back live wallpaper support
Revert back to Stock MMS (AOSP does not work)
Added Google Maps 4.2
Added keyboard with voice
Issues/bugs: Rosie fc (ignore for now), HTC Alarm cannot be turned off.
v1.1 A2SD Split - Full Build
Alternate a2sd method - Dalvik will be stored in data/dalvik-cache (your internal memory will decrease as apps are installed, but some apps should open faster) and app data goes to SD. 140MB+ free space on Data after first boot.
Build is odexed, more space on Data (deodexed builds creates dex files in data/dalvik-cache, so you get less space on data)
Removed wired tether
Zipalign on boot
Added back HTC Weather
v1.1 D2C Bare - Dalvik to Cache
Experimental. THIS IS NOT AN APPS TO SD BUILD. Almost the same build as 1.0 except for the following changes.
Dalvik is moved to Cache instead of Data partition. Cache available is around 38MB. It may not seem like much, but I have around 42 apps installed and 14mb free in cache. Large apps will obviously eat up space faster. Also, you CAN boot w/o an SD card and access apps while disk is mounted.
Build is odexed, more space on Data (deodexed builds creates dex files in data/dalvik-cache, so you get less space on data)
Removed wired tether
Zipalign on boot
v1.0 A2SD Full - Official Release (Wipe REQUIRED!)
Alternate a2sd method - Dalvik will be stored in data/dalvik-cache (you will see less internal memory, but some apps should open faster) and app data goes to SD.
Deodexed, rooted with superuser rights
Left most of Sense apps and all widgets, only removed Footprints + widget
AOSP messaging & Fonts from Cyanogen
Custom battery Icon - credits to somebody here at XDA (I will find out)
Boot animation by Qtek modded by Nighthound (temporary)
Themed Google search widget and Analog clock (matches power control)
Mount usb and wired tether (untested)
HTC IME modded by jonasl & skinned by gimpsta (black with transparent black background)
Built-in Adblock, Voice Search, Voice Dial, Navigator, Amazon MP3 & Swype
VPN Ready, with tun.ko module & OPENVPN. Thx Richard Trip
Removed most sounds, but added my own personal ones
v1.0 A2SD Barebone - Official Release (Wipe REQUIRED!)
Alternate a2sd method - Dalvik will be stored in data/dalvik-cache (you will see less internal memory, but some apps should open faster) and app data goes to SD.
Deodexed, rooted with superuser rights
Removed lots of Sense apps and all widgets, including Rosie & setup wizard with Learn More
Kept Desire camera, contacts, Desk Clock, FM Radio, Gmail, HTC Mail, Voice Recorder, GTalk, YouTube, Market, HTC Album, Calendar, Music & contact social network integration.
Added Friends Stream (I believe this resolves the infinite sync icon)
AOSP messaging & Fonts from Cyanogen
Helix Launcher 2 by arctu
Custom battery Icon - credits to somebody here at XDA (I will find out)
Boot animation by Qtek modded by Nighthound (temporary)
Clear HTC lockscreen - thx ratcom
Replaced HTC Dialer with Dialer One
Themed Google search widget and Analog clock (matches power control)
Mount usb and wired tether (untested)
HTC IME modded by jonasl & skinned by gimpsta (black with transparent black background)
Built-in Adblock
Removed most sounds, but added my own personal ones
*Thanks to those who have donated and/or have offered support. It is sincerely appreciated!
Download Releases:
http://www.mediafire.com/?sharekey=3f0b4ef066c05120e5c3dee5769931ec7aa49526a32cff39b16e5c9d3b204475
http://www.4shared.com/dir/38765337/2f821406/ROM_Release.html
http://xda.b42.nl/evil/ (thanks for your FTP, rveupen)
Download Test Files:
http://www.mediafire.com/?sharekey=3f0b4ef066c05120e5c3dee5769931ec50fedf71cb3f7d12947708e37b913e74
http://www.4shared.com/dir/38765347/60c382c1/ROM_TESTING.html
Download Removed Barebone Odexed Apps - incompatible with v.095 *HTC Sync can be found in HtcSettingsWizard
http://www.mediafire.com/?sharekey=3f0b4ef066c05120e5c3dee5769931ecbf30f923b6dcbc896aab8f27f97f3d90
http://www.4shared.com/dir/38782354/c23664e2/Desire_APP.html
Kernels - Froyo & Sense
http://www.mediafire.com/?sharekey=3f0b4ef066c05120e5c3dee5769931ec36140b01a979e073292b492bd5edc68e
http://www.4shared.com/dir/Bgi66YgU/Desire_Kernel.html

Change Logs:
v.085 A2SD DEODEXED - Testing (Based on Daneshm90's Auto-Deodexer [SCRIPT] and modified by (crzyruski) for JF's baksmali / smali v1.2.1)
full deodex of original rooted update from PaulObrien
HTC IME from jonasl
some app builds replaced for functionality sake
Issues: Footprints doesn't work and neither does htc music widget
v.085 A2SD
Fixed no volume calls
Added different Gmail build
v.085 Barebone
Removed some xml that could cause issues.
v.084 Barebone
Added back Desire camera, album, music and lockscreen
Added different Gmail build
Added back some customization files
v.080 Barebone - Testing
Added music app! AOSP
Fix Camera - Gallery3d FC (I think)
Removed some other fluff
Removed HTC lockscreen (forgot about this - The lockscreen is jacked up. Slide up, yes up, to unlock.)
v.073 with A2SD - Testing
Replaced stock apps with AOSP Gmail, MMS, YouTube & AOSP Fonts(Thx Cyanogen)
Removed Car Dock, Weather & PDF
Added Incredible Swype
v.072 Barebone
Partially optimized
Themed battery icon
Removed HTC weather, calc, youtube, album & mms
Added AOSP calc, gmail, youtube, gallery3d & mms
Issues: Missing Music
v.062 with A2SD
Partially optimized
Themed battery icon
v.05 Barebone
Removed all HTC widgets and app dependencies
Removed Rosie
Added Helix Launcher 2 (thx arctu)
v.053 with A2SD
Added HTC Navigator (thx brut.all)
Added Voice Search & Voice Dial
v.04 with A2SD
Enhanced a2sd that moves cache and dalvik to sd
Root
v.03
1.15.405.4 based ROM that has Superuser access
Removed Peep, Stocks, RSS, News, Facebook, Maps, QuickOffice, Teeter and respective widgets.
Removed most sounds, but left in a few custom ones
Added Amazon MP3, Cardock, Geniewidget, Accessibility, built-in Adblock
Removed some fluff from the system
Cleaned up build.prop a little
Transparent black notification tray
Notification pull down modded, originally by Manup456
Issues:
No APN's (manually add it) - Work around: Download APN backup from market after you have entered or have good APN's, then restore it when flashing a new ROM.

Awesome that you are modding Desire roms! Have been following you on the Liquid scene and your roms rock

Very nice, is it possible to remove more sense apps?
Thanks for the first custom rom for desire

Please include apps2sd

Can you take out HTC sense from the ROm. I'd like to try vanilla Eclair

Paul will release cyanogenmod 5.0.6 today for the desire

lukaswat said:
Please include apps2sd
Click to expand...
Click to collapse
+1
hystryxen said:
Can you take out HTC sense from the ROm. I'd like to try vanilla Eclair
Click to expand...
Click to collapse
Why not just turn it off then? I know this was possible on the Hero... to be fair, I've not check on the Desire.
If there is one or two of the removed apps that we actually want, where can the apk's be found?

Awesome work)
We here in Russia are interested, which languages are present in this ROM?
And also +1 for A2SD

Nice, first custom ROM for the Desire I saw Congrats!

lukaswat said:
Please include apps2sd
Click to expand...
Click to collapse
...and yet again +1 for that

Yeah i installed this ROM after i'd done Paul's one, and all i'm getting is
"The application HTC Sense (process com.htc.launcher) has stopped unexpectedly. Please try again."
Everytime i retry i just get back through the same loop!

Re: [ROM-MOD] eViL De-SiRe v.03 (Bravo) [4/28/10]
Yeah i installed this ROM after i'd done Paul's one, and all i'm getting is
"The application HTC Sense (process com.htc.launcher) has stopped unexpectedly. Please try again."
Everytime i retry i just get back through the same loop!
Click to expand...
Click to collapse
did you wipe and clear caches?

Re: [ROM-MOD] eViL De-SiRe v.03 (Bravo) [4/28/10]
Very nice, is it possible to remove more sense apps?
Thanks for the first custom rom for desire
Click to expand...
Click to collapse
I could, yes. which specific ones do you not find useful?

Re: [ROM-MOD] eViL De-SiRe v.03 (Bravo) [4/28/10]
Awesome work)
We here in Russia are interested, which languages are present in this ROM?
And also +1 for A2SD
Click to expand...
Click to collapse
English, spanish, german, french, and I think Portuguese.
i'll look at a2sd, but i believe pauls addon will work. i have not tried.

Great to see a custom build like this, so soon after root was achieved.
eViL D: said:
I could, yes. which specific ones do you not find useful?
Click to expand...
Click to collapse
I could do without friendstream and footprints too.. (as stripped/lite as possible)
Do you have a screenshot of your "Transparent black notification tray"
Also: have you given any thoughts to a "wake screen with middle button" mod, and perhaps a silent switch on lockscreen?
Regards
-e

eViL D: said:
I could, yes. which specific ones do you not find useful?
Click to expand...
Click to collapse
I like to have the nexus dia-er (or even better, the moddded dialer by wysie) and the nexus mms.apk. I tried to push them but ended up in a bootloop
Any help would be great

Eddiemc said:
I could do without friendstream and footprints too.. (as stripped/lite as possible)
Click to expand...
Click to collapse
As I said before, give us an option to put these back in though, I use Friend Stream for example.

keeping htc widgets would also be nice

yep i wiped and cleared data using the recovery menu before i then installed the zip.

[Release] Stock FRG01 Deodexed + Extras

What is it? FRG01B, Deodexed, Rooted, Busybox, Stock Kernel + Extras
(Special thanks to Cellzealot for the leak!)
Where’d it come from? My Droid World
Why? I like clean and simple roms. This rom should be a great base to build on, theme or just run as an everyday rom. Going forward, any themes and kernels made for FRG01B or compatible with FRG01B will work for this rom. (You may run into trouble with the Mms.apk since I pulled it from CM, see FRG01B – Stock - Deodexed, no apk mods at all)
FRG01B Deodexed - Market Fixed - Update.zip
This is what I set out to do originally, for people that want an untouched, deodexed rom with a working market and a good version of busybox. I didn’t change anything else.
metiCkModV4.2 - Update.zip - Yay!! - If you are upgrading from a previous version of metiCkMod then you don't need to wipe
- Added Chrometophone app
- Added build name & base under About phone
- Added Wifi scan tweak to save battery life
- Removed weather channel logos from news & weather widget
See full list of tweaks and mods below…
What I did…
System Stuff:
- Fixed the market sync problem (All apps show up in market as 2.1-update-1)
- Installed busybox V. 1.16.2
- Stock kernel – Defaults to 600mhz but can be overclocked to 800mhz, also allows for wired & wireless
- Added notifications & ringtones from N1, DX and the Droid of course
- Removed unnecessary scripts from xbin
- Added wifi scan tweak to save battery life
- Added build name & base under About phone
- Removed weather channel logos from news & weather widget
App Stuff:
All the traditional apps are all included. I only removed Google Goggles and the VM stub
- Added Chrometophone app V1.1 (Credit to Google)
- Removed weather channel logos from news & weather widget
- Modded launcher (removed 60+ jpgs and added new ones)
- Download Crutch Lite (allows the download of any file type) (Kanged the idea from Team Chaos)
- File Manager (from the motoroi system dump, allows you to manage files on the sdcard) (Kanged the idea from Team Chaos)
- Updated Messaging App (Credit to Cyanogenmod) (includes tons of options including black background and different led colors)
- Rom Manager (Thanks Koush!) (Rom Manager Premium!)
- Wired Tether (Project Site)
- Wireless Tether (Project Site)
Recommended apps:
Flash Player (Beta 3)
Froyo Add-ons (Chrome to Phone V1.1 & Flash Beta 3)
SetCPU (Available on market or XDA)
HTC_IME (awesome keyboards)
As you can see I didn’t do much, but if you want a really clean stock 2.2 rom with the latest stuff, then this is what you want.
Clockworkmod Instructions: Place file anywhere on your sdcard, boot into recovery, select install zip from sdcard, choose zip from sdcard, and select the appropriate zip file.
SPRecovery Instructions: Rename file to update.zip, place on the root of your sdcard (meaning not in a folder on your sdcard), boot into recovery
Wipe or not? It is my recommendation that everyone wipes data & cache no matter what build they are coming from. Also, you should only use titanium to re-install apps without the data. It kinda sucks to re-enter all your info, accounts and bookmarks (especially with all these leaks) but in the end, if you run into problems you won't wonder if it’s because you didn't wipe data/cache.
For those of you that want to push and pull files to the droid. I did not edit the boot.img so before you type adb remount in adb you need to type adb root, wait for it to connect and run as root, then you can hit adb remount.

Do I have to wipe my phone? Or can I leave it and just download it?

How can I download this ROM?

Sorry guys, I didn't know XDA had an approval process. I haven't posted here before so I cant put links up. You can grab the downloads from Droid forums in the droid hacks section or google frg01 extras. The first link should be it. Sorry again about the lack of links. I will see if I can get an admin to let me post them.

I love it! It is a beest combined with things like black notification bar and Spare Tools. HTC IME download here doesn't work but getting it from another source creates beestly ROM! Thank you!

[ L ] said:
I love it! It is a beest combined with things like black notification bar and Spare Tools. HTC IME download here doesn't work but getting it from another source creates beestly ROM! Thank you!
Click to expand...
Click to collapse
You're welcome! I'm glad you like it. I'll try and update this thread as soon as I can. In the mean time you guys can follow the rom's progress at droid forums.

metickulous said:
Why? I like clean and simple roms. This rom should be a great base to build on, theme or just run as an everyday rom. Going forward, any themes and kernels made for FRG01B or compatible with FRG01B will work for this rom. (When applying themes you may run into trouble with the Mms.apk since I pulled it from CM, not I said may not definetly, see FRG01B – Stock - Deodexed if you do, no apk mods at all)
Special thanks to Cellzealot for the leak!
Where'd it come from? My Droid World
NEW!! - metiCkMod - Blackbar - Update.zip
- metiCkModV4.3 with Black notification panel (based on the Pl3x rom version)
- Completely based off of FRG01B
NEW!! - metiCkMod - Dark Glass - Update.zip - This is a FULL rom with a modified Smoked Glass theme port. As most of you know, I didn't create the original theme, that would be Adamz. All credit for the theme goes to him. he obviously worked really hard on it when he compiled it. This rom has a metiCkModV4.3 base, a blackbar notification panel and smoked glass widgets. I purposely didn't port the blue color scheme and the htc sense icons. I like the vanilla android base much better. There may be some things I need to theme that I didn't get to yet. If you see anything let me know. Questions, concerns, feedback? Post it up in this thread. Enjoy and thank you Adamz for your excellent work! If I get enough request I will port the whole theme for people to enjoy.
CAP2.jpg CAP3.jpg CAP4.jpg CAP5.jpg CAP6.jpg
Deodexed - Market Fix + Extras - Update.zipFRG01B - metiCkModV4.3 FROYO FRG01B Based - If you are upgrading from a previous version of metiCkMod then you don't need to wipe
- Updated Chrometophone app
- Removed my handle from About phone (It’s counterproductive the point of this rom)
See full list of tweaks and mods below…
FRG01B Deodexed - Market Fixed - Update.zip
This is what I set out to do originally, for people that want an untouched, deodexed rom with a working market and a good version of busybox. I didn’t change anything else.
What I did…
System Stuff:
- Fixed the market sync problem (All apps show up in market as 2.1-update-1)
- Installed busybox V. 1.16.2
- Stock kernel – Defaults to 600mhz but can be overclocked to 800mhz, also allows for wired & wireless
- Added notifications & ringtones from N1, DX and the Droid of course
- Removed unnecessary scripts from xbin
- Added wifi scan tweak to save battery life
- Added build name & base under About phone
- Removed weather channel logos from news & weather widget
App Stuff:
All the traditional apps are all included. I only removed Google Goggles and the VM stub
- Added Chrometophone app V1.1 (Credit to Google)
- Removed weather channel logos from news & weather widget
- Modded launcher (removed 60+ jpgs and added new ones)
- Download Crutch Lite (allows the download of any file type) (Kanged the idea from Team Chaos)
- File Manager (from the motoroi system dump, allows you to manage files on the sdcard) (Kanged the idea from Team Chaos)
- Updated Messaging App (Credit to Cyanogenmod) (includes tons of options including black background and different led colors)
- Rom Manager (Thanks Koush!) (Rom Manager Premium!)
- Wired Tether (Project Site)
- Wireless Tether (Project Site)
Recommended apps:
Flash Player (Beta 3)
Froyo Add-ons (Chrome to Phone V1.1 & Flash Beta 3)
SetCPU (Available on market or XDA)
HTC_IME (awesome keyboards)
As you can see I didn’t do much, but if you want a really clean stock 2.2 rom with the latest stuff, then this is what you want.
Clockworkmod Instructions: Place file anywhere on your sdcard, boot into recovery, select install zip from sdcard, choose zip from sdcard, and select the appropriate zip file.
SPRecovery Instructions: Rename file to update.zip, place on the root of your sdcard (meaning not in a folder on your sdcard), boot into recovery
Wipe or not? It is my recommendation that everyone wipes data & cache no matter what build they are coming from. Also, you should only use titanium to re-install apps without the data. It kinda sucks to re-enter all your info, accounts and bookmarks (especially with all these leaks) but in the end, if you run into problems you won't wonder if it’s because you didn't wipe data/cache.
For those of you that want to push and pull files to the droid. I did not edit the boot.img so before you type adb remount in adb you need to type adb root, wait for it to connect and run as root, then you can hit adb remount
Click to expand...
Click to collapse
There you go mate, PM me when there are updates so i can update this thread for you.

bmxrider4444 said:
There you go mate, PM me when there are updates so i can update this thread for you.
Click to expand...
Click to collapse
awesome, thank you very much. I will definitely take you up on that.

No problem, you'll be able to post link in another few posts if i am not mistaken, but i figured this would help people in a bit of a hurry, or lazy people lol.

Hey, is there an update that will stop the bootloops? I had to restore to when I first installed this. I also lost my 3G connection. Please fix ASAP!
Sent from my Droid using XDA App

bmxrider4444 said:
There you go mate, PM me when there are updates so i can update this thread for you.
Click to expand...
Click to collapse
Sent from my Milestone using XDA App

[ROM] [20/06] Pre-rooted Stock Froyo (2.29.405.5) [Optional mods]

Note: a pre-rooted Gingerbreak stock ROM is now available (see signature).
This is a rooted stock ROM, based on HTC 2.10.405.2, or 2.29.405.2/2.29.405.5.
For the basic rooted-only ROMs:
Added root (including busybox)
Superuser App - 2.3.6.1 (ChainsDD)
Boot sound disabled
The idea behind this is that you get a base ROM that is stock with root, and pretty much nothing else, and then get to choose which changes you want from a set of mods I've put together. I haven't tweaked or changed anything in the stock ROM, no apps are removed or updated (see mod below to restore the boot sound). Choose this first ROM if you don't want to change anything at all, and you simply want a rooted stock ROM, or see below for more options.
You should do a full wipe in recovery before installing the ROM. If you are coming from an official (unrooted) stock ROM, this may not be necessary.
Download 2.10.405.2 Stock ROM with Radio (2.0) - updated
Changes: 2.0 - remove bash from base, update to latest Superuser app, fix file permissions to be an exact copy of stock.
2.10.405.2 INIT.D ROM v2.0
This version is mostly identical to the first except it has a minor mod to enable init.d scripts. No scripts are included, so this won't affect anything in itself. However, it gives much greater flexibility for mods, and is required if you want to make some of the changes below. This version of the ROM doesn't include the radio, so you must flash an up to date version yourself if you don't have one already. You do not have to install the first ROM before this. Updates: latest Superuser app and new boot image (closer to stock).
Download ROM with init.d Support (2.0)
Radio 32.44.00.32U_5.09.05.30_2
2.29.405.2/5 INIT.D ROM v3.0 | v3.1
This is the latest HTC unbranded release. The base ROM is as described above, including init.d support, with no other modifications. Choose this if you want to install the latest rooted stock ROM. The mods below are not all compatible with this newer ROM, so it is important to install only those that are marked as compatible. The 2.29.405.5 is a very minor update from 2.29.405.2; you can install this directly, you do not need to install 2.29.405.2 first.
If you are upgrading from an earlier pre-rooted ROM you may be able to do this without wiping your data, though a wipe is recommended as usual if you experience any problems. To upgrade without wiping you must re-install your previous mods immediately following the ROM's installation. For example, if you have updated your system apps, by installing the new ROM these will be replaced with older versions, and so you must first run the update apps mod again before booting the phone. If you do not, you will certainly get problems. However, if you perform a full wipe, you do not need to worry about any of these things.
The radio supplied by HTC with this ROM is 32.49.00.32U_5.11.05.27 and so is the recommended one for you to flash.
Download 2.29.405.2 ROM
Download 2.29.405.5 ROM (the name on the download is mislabelled.)
Download radio
OPTIONS
Below are some mods to this ROM. They are purely optional, and of course take you further away from the stock ROM. Remember that all of these mods are designed to work with this ROM specifically, and not others.
POWERSAVING MODPACK (1.6) - v3 compatible - updated || 18/10
This update works only with the second ROM with init.d. It adds a few things to the ROM:
Perflock disabler - lets your phone consume less power when idle
Ondemand governor - for good power/performance
Undervolt - reduces the overall power your phone uses
Screenstate scaling - scales down CPU usage depending on battery level and screen state
CFQ scheduler - improved general performance
This modpack will improve battery life over stock, and also improve performance a little. 1.4: new CPU scaling. 1.5: size reduced by over 5 times, no functional change. 1.6: switch to ondemand, less performance drop with battery life reduction.
For the v3.0 ROM you must download version 1.6 of the mod from here.
HIGH POWERSAVING MODPACK (1.0)
This works as an alternative to the above powersaving modpack. Flashing this will replace the other and vice versa. This version conserves more power by using the conservative governor (new) instead of the interactive, and cuts the processor maximum speed to 800MHz when the battery reaches 80%. Thus performance will suffer a little (unless you are running while charging), but battery life will be increased. Download here.
FLASH PLUGIN SYSTEM REPLACEMENT (1.7) - v3 compatible - updated || 20/06
This will completely replace the system version of Flash with the current market version (10.2.156.12). It will install both the app and the system plug in, meaning it won't use any space in your available internal storage. If you have installed the market update yourself, the phone will automatically remove it when you next boot. Since this update requires additional system space, it is advisable to install a mod that clears some space (e.g. the tweaks mod) before you apply this. 1.1: Update to new Market version. 1.2: New Market version. 1.3: New Market version (10.1.105.7) 1.4 New Market version (10.1.106.15). 1.5 New Market Version (10.1.106.16). 1.6 New Market Version. 1.7 New Mark Version (10.3.185.24). Note: There may be a problem with this latest update and video, see here to revert the update.
FLASH PLUGIN REMOVE/UPDATE (1.3)
This mod will remove the system installed version of Flash, freeing up some space for other mods. You can then install the updated version from the market (i.e. taking up data storage, not system). If you have an older version of this mod installed, it will restore your system plugin back to stock, and you may need to reinstall Flash from the market afterwards. If you just want to update the system-installed version of Flash (as with the app update mod), you want the previous mod rather than this one.
MINOR TWEAKS (1.2) - v3 compatible
This mod will enable wake on optical joystick press (as well as the power button), and will install the default boot animation to the data area, where you can replace it with a custom one if you want to. It also allows hosts modification (you can use the AdFree Android app - do not use the symlink option in it). You will need to re-apply this mod if you do a full wipe. 1.2: Update bash.
RESTORE BOOTSOUND (1.0) - v3 compatible
You really like that sound? Ok, you can put it back with this mod. This is suitable for both ROMs.
A2SD+ (1.4) - v3 compatible
This requires the second ROM (v2.0) with init.d. Take a nandroid backup before enabling this. Activate the feature by adding an ext2/ext3 partition to your sdcard (ext4 is not currently supported). It must be formatted and ready to use before adding this. If you have apps on an existing partition it may cause problems if you don't perform a full wipe, but a full wipe is very strongly recommended if you want to use this. This version is safe to use with USB disk mode. Please read this post for important information and the download link.
UPDATE APPS (2.3) - v3 compatible - updated || 20/06
This will update your system Google apps to the following versions: GMail 2.3.2, Maps 4.7.0, Google Search 1.1.2. These are unmodified official versions (the same as market updates). They replace the system installed versions. 1.6: Google Maps 4.7.0. 1.7: GMail 2.3.2, Google Voice Search 2.1.0, include YouTube 2.1.6. 1.8: Maps 5.0.0, Voice Search 2.1.1. 1.9: Maps 5.1.0. 2.0: Maps 5.2.0, GMail 2.3.4.1, now removes Teeter from system. 2.1: Maps 5.2.1. 2.2: Maps 5.3.1. 2.3: Maps 5.6.0, remove Voice Search update.
UPDATE MISC APPS (1.6) - v3 compatible - updated || 20/06
Update system apps - Facebook 1.4.1 and YouTube 2.0.26. 1.3: Facebook 1.5.0, YouTube 2.1.6. 1.4: Facebook 1.5.1. 1.5: Facebook 1.5.3. 1.6: Facebook 1.5.4.
SD READAHEAD (1.0) - v3 compatible - new || 13/12
This will increase the readahead value for the sdcard from 4 to 128, which may improve performance. This small patch does not involve installing a new kernel or boot image. See this post for the download.
Deodexed Mod (1.3) - v3.0 available - updated || 18/12
If you don't know what this is, don't install it. This mod will fully deodex the ROM. It's best to apply this immediately after installing the base stock ROM, and it will remove any changes you've made to the system apps. After applying this mod the first boot will take a long time, this is normal. You will also lose a large amount of the phone's internal storage. There is no way to reverse this mod without reinstalling the base stock ROM. Note that framework-res is already deodexed in this ROM. Update 1.1: fix for deleting old files; 1.2: fix for updated Superuser app. 1.3: now available for v3.0 ROM Download here for v2.0 only. Read this post for the v3.0 version. This mod is currently not supported with the 3.1 ROM.
Super Circle Battery Mod (external) - v3 compatible
Download this file and upload it to http://circle.glx.nl/ where you can choose your style and receive a flash file. Note that you do not have to deodex the ROM for this mod. See this thread for more information. Since I am not responsible for this mod, I am unable to help with any problems with it.
Reboot in Power Menu (external)
Deodexed only: Gain the ability to reboot and not just shutdown from the power menu with snq-'s mod. The download package is here and discussed here.
Compressed dalvik-cache (1.0) - v3 compatible
This mod will compress the dalvik-cache, typically saving around 30% of space. This is especially useful for deodexed ROMs. This mod is compatible with the A2SD+ mod, which moves your dalvik-cache to the sdcard. It may also improve performance very slightly. You MUST wipe your dalvik-cache in custom recovery if you install this mod. If your ROM is not deodexed you should apply the Flash or tweak mod to free up some system space before adding this mod due to its size. Install with the fusecompress attachment. Requires init.d support. See here for v3 version.
teppicify (1.1) - v3 compatible
In case you forget you're not running unrooted stock any more? This will alter the information under 'Software information'. This will also prevent you from getting future OTA HTC update notifications, which are very unlikely to work on a custom ROM anyway. See this post for link.
CIFS + OpenVPN modpack (1.1) - v3 compatible
With this you gain CIFS support to connect to Windows/Samba shares transparently, and OpenVPN support. The WiFi module is also updated to prevent very low speeds when the phone is sleeping. Download here or here for the v3.0 link.
Suggested Installations
Totally Stock: base ROM + restore bootsound.
Rooted Powersaving: base ROM with init.d + powersaving modpack.
Rooted and Updated: base ROM with init.d + tweaks + powersaving modpack + system Flash replacement + updated apps.
_____
Apply the updates in custom recovery. You can apply them immediately after installing the ROM, you do not have to reboot each time. Most mods can be applied at any time, and can be applied over the top of earlier versions.
If you have any problems with the ROM and want help, you must say which one you installed, which mods you've installed, and whether you did a full wipe before you installed the ROM.
Credits: dsixda for kitchen, FloHimself, Myshkinbob and iscaela for kernel modules
If you find my development work useful, please consider a small donation.

better to add a2sd+
and peep for twitter is already fixed?

ghmail2 said:
better to add a2sd+
and peep for twitter is already fixed?
Click to expand...
Click to collapse
Start adding things like that and it's no longer stock. I put this together for people who just want stock + rooted.
edit: A2SD+ is now an optional add-on.

teppic74 said:
Start adding things like that and it's no longer stock. I put this together for people who just want stock + rooted.
Click to expand...
Click to collapse
i agree...
love stock rom
exatly how i wanted!

thanks stock roms are the best
once more, thanks for your work

What the difference with the 32.44.00.32U_5.09.05.30_2 posted on the forum ?

Flashed rom, running great so far, thanks for leaving rom as standard as possible.
And peep/twitter is working again i'm happy now.

Dj Sky said:
What the difference with the 32.44.00.32U_5.09.05.30_2 posted on the forum ?
Click to expand...
Click to collapse
That is a radio, this is a Rom including that radio.

Does it have sense?
Sent from my HTC Desire using XDA App

Of course.

i think it uses sense .. how is the bechmark results(quadrant) and battery life?
Sent from my HTC Desire using Tapatalk

Skimi said:
Does it have sense?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Yes. It's a stock HTC ROM.

Just installed, great stable rom! Thanks!

In fact, it's a HTC official rom with the latest radio ? Is Exactly ?

good work. Thanks

hw to install
hi..i'm using htc desire in malaysia..i juz updated OTA Froyo 2.13.707.1...is there any chance that i can use urs?? and how to install it??i'm new here..plss help..i dont noe hw to root also

rusty27 said:
hi..i'm using htc desire in malaysia..i juz updated OTA Froyo 2.13.707.1...is there any chance that i can use urs?? and how to install it??i'm new here..plss help..i dont noe hw to root also
Click to expand...
Click to collapse
@rusty
Could you please check what kernel and radio are in your ROM? People wrote about it but nobody uploaded a full version so far (it's under Menu / Settings / About / Software). Thanks!

mmaacc said:
@rusty
Could you please check what kernel and radio are in your ROM? People wrote about it but nobody uploaded a full version so far (it's under Menu / Settings / About / Software). Thanks!
Click to expand...
Click to collapse
@mmaacc
kernel version: 2.6.32.15-gd96f2co
radio: 32.44.00.32U
can i use tat rom?? i didn hv goldcard...can i install this new rom simply or wat??

rusty27 said:
@mmaacc
kernel version: 2.6.32.15-gd96f2co
radio: 32.44.00.32U
can i use tat rom?? i didn hv goldcard...can i install this new rom simply or wat??
Click to expand...
Click to collapse
Thanks, so this has the new kernel also.
For you it actually depends what bootloader you have and if you have a SLCD phone. If you updated through OTA I assume you now have something like HBOOT 0.92. That makes it a bit more difficult to root the phone, which you need to do first. Please have a look around here, there are some guides on how to downgrade/root these newer versions. And after this you should be able to flash this ROM; or any other .
Here is a start http://unrevoked.com/

Can you add a version without radio update?

[ROM]SparksMod-1.1.2 Apps2Ext+LauncherPro - Dream/Sapphire[32b] (09/12/10)

Update: There seems to be a popular slang term "cook" going around on this thread as well as pm's. If you are having a issue because you didn't read the OP, I will not take the problem seriously. All I will tell you is wipe and reflash! Call me whatever you will, but I DO NOT USE KITCHENS. Things I do use:
1. My brain
2. My computer
3. Autosign script
4. XDA obviously
That's it!
New things added and removed, check the changelog below. If you have a g1, please rate and comment on my g1 thread here: http://forum.xda-developers.com/showthread.php?p=7656698#post7656698. This way I know what devices are having issues. So far no major issues have been reported, and I would like to keep it that way.
After flashin the rom and gapps, Set your phone up the way you want it. If you want to use Compcache instead of swapper2, then select "deny" when prompted from superuser. Also if you want to remove Swapper2 completely with adb:
adb devices
adb remount
adb shell
cd /system/app
rm Swapper2.apk
It should be gone instantly. This app is only 82.4kb large in size, so if you think you are going to be saving a lot of space on your phone, then you will be dissapointed. If you just can't stand it being in your app drawer you can also remove apps with titanium backup for free on the market, or Astro file manager (also free on the market).
If you want Swap instead of compache, you will need to select "allow" when prompted. You will need to disable Compcache in CM Settings and reboot.
Once you boot up open the swapper2 app and set it up the way you want. I have mine set to 32mb for the size, and 20 swappiness for my swap file, but I may go back to using compcache. Also select safe unmount for mounting sdcard so that your swap is safely unmounted before your sdcard mounts. Once you unmount your sdcard, you can go to swapper and select the on button to enable it again.
Then go to CM Settings > application settings, and select "Allow application moving". Don't change the install location. That's it, now your all ready to install as many apps as you want to your ext partition. It seems that people are having good luck with flashing from v1.1.1-v1.1.2 with no wipe at all. This is a good sign that my no wipe options is working for now, we will see with future updates, but I'm confident that no wipe should be necessary at all from here on out.
You will need to flash the new gapps 20100912 If you want things like chrome2phone. You also need to install the chrome to phone extension on your chrome browser here: https://chrome.google.com/extensions/detail/oadboiipflhobonjjffjbfekfjcgkhco
Thank you Cyanogenmod, Firerat, ChromerSmith, Dumfuq, and anyone else I'm forgetting for making this all possible. If you like our work, buy us a beer.
Requirements: This rom supports G1/Dream/Magic/Sapphire [32b] devices only. You need the Danger SPL. If you want apps2ext partition then you need a ext3 or ext4 partition on your sdcard. I am not responsible for broken phones or sdcards!
Changelog
1.1.2
-Removed ADW and added LauncherPro, seems to run better!
-Added Chrome2Phone to gapps (You must download the new gapps if you want this)
-Added Swapper2 to rom for people who want swap instead of compcache.
-Added CMTheme folder, and LauncherPro Backup folder. If you wish to use these, you must extract the zip files to the root of your sdcard. Go to restore theme in CM Settings > User Interface > Tweaks extras, and then select a theme. There will be a option for SparksMod theme, select this and it will change the colors to white. For LauncherPro just restore settings in the settings for LauncherPro.
Download ROM:
All Downloads: http://www.mediafire.com/?1vh6itlcpdxdj
Rom MD5: 097bfafbc715594f634ca7b7ce9ec067
ROM OC'd MD5: 703cab98497b1c774d505b750ed4c1f5
Gapps MD5: 22eb062054bd18c7b5410d7271b21c26
1.1.1
-Added the latest dumfuq's overclock kernel to the rom as a separate option
-removed the newest gapps from the rom, seems to run better this way, I was having some force close issues with gmail, plus it's much much faster!
-The newest ADW Launcher is included with this, it's much faster now!
1.1 Stable, built on CM-6.0.0-DS
- Added new firstboot.sh method for apps2ext partition. Install as many apps as you want after first boot and never have to reboot or use any terminal commands to move apps!
-Moved boot animation to /data/local/
-New gapps not themed, speed seems to be better
-Added black keyboard back
-Removed Wallpapers, Cyan has some really nice new ones I thought I would use for awhile
ADW v1.3.4 is included
v1.0 Stablish, built on top of the 08/25/10 nightly build:
ADW v1.1.3 is now included in the nightly builds
-Redid the theme again. The theme is final this time, with a lot more icons in the app drawer, and newly added liquid battery icons. I optimized all the icons for better performance and speed with the help of Lithid.
-Removed unnecessary themed stuff that could of been slowing the rom down, like the black keyboard and a few other things
AMS v0.3.3
-Added Chromersmith's Script kanged
AMS v0.3.2 Built on nightly build 08/22/10
ADW Launcher v1.1.1!
-Added Wireless tethering
-Fixed black background on launcher from previous version
-Added gapps to rom so as not to have to flash separately anymore!
-Changed the whole theme!: Changed battery icon to blue with 6 lines and turns red when battery is low. Also changed all app drawer icons to a black darker theme and removed settings menu icons. Changed half the wallpapers again lol. Let me know what you think of them.
-Removed some ringtones and added about 5 of my own, hope you like them.
-Added firerat's patch to rom so as not to have to download and place on sdcard anymore. see instructions below.
AMS v0.3.1 Built of off the latest nightly build 08/19/10
-Optimized all wallpapers
-Stuff added: New Ubuntu Launcher icon, all stock ringtones are back
AMS v0.3 Completely overhauled from RC3
-Stuff added: Everything except for the launcher: Boot animation, all wallpapers, theme. Themed gapps (quick search web box, and genie widget)
-Stuff removed to save more system memory: Google voice (available on the market for download onto external storage), and a lot of ringtones.
v0.2.1
-removed blurred vision 2 boot animation (just wasn't running well), and replaced with droid (boots much better)
-Added Black Keyboard
v0.1 from latest nightly 081310:
-Removed Rom Manager to save on space, download it from the market
-Added HTC ADWLauncher
-Added VatSense 1.6.1 Framework
-Added 15 wallpapers
-Added Blurred Vision 2 boot animation
I am open to feedback on any changes or ideas anyone has for future improvements.
Instructions:
Full wipe required if coming from anything other than SparksMod-1.1.1 I can not guarantee that the no wipe thing will stick. These roms are changing constantly since they are still in the development stage, or at least until Cyanogenmod is completed with cm6 development for the dream/sapphire.
Apps2ext partition is now automatic. Make sure after first boot, go to CM Settings > application settings, and select "Allow application moving". Don't select a different install location. That's it, feel free to install as many apps as you want worry free from reboots to move apps, slow boot times, or running terminal commands to move the apps to ext when you get low on space.
You will need to change the clock color and date color as with any blackbar mod in CM Settings, or use the xml folder from my downloads folder. Extract the contents of the zip file to the root of your sdcard, then restore theme as usual in CM Settings.
LauncherPro Settings: Instead of listing my current settings, feel free to download and use the LauncherPro backup settings from my downloads folder. Extract the contents of the zip file to the root of your sdcard, then restore settings in LauncherPro.
I recommend downloading or installing SetCpu so you can control the speeds if you are using the overclock kernel to see what works good for you as far as battery life and speed combined. I set mine at 596mhz and it's still fast without too much battery drain.
-Spare Parts settings: Set transitions windows and animations to fast
-Set CM Settings > Performance to "disable surface dithering", "lock home in memory", enable "JIT".
For future theming and modding development: https://www.paypal.com/cgi-bin/webs...bn=PP-DonationsBF:btn_donate_SM.gif:NonHosted

My father just installed this on his phone and is very happy with it. THANKS!

Ok. Been using this Rom for a couple days. So far everything is smooth and fast. Did a no wipe upgrade to the oc'd version second day. Had one time that a reboot deleted my apps and one force close when I went to settings>sound (settings force close). May have to do with no wipe upgrade? Battery drain is normal for froyo. That's it so far.
Going to nandroid back to standard version since I will never go over 576 anyway.
Everything is super fast and responsive. Very stable so far. Best screen rotation time on froyo. Liking the launcher pro as well. Thank you for the cm ui and LP settings zips btw.
Mt3g. No swap. CC enabled. Set CPU at 245/576. Everything else set up normal.
Great job. Keep it coming. Thanks for your hard work.
Sent from my HTC Magic SparksMod using XDA App

Installed it on my wife MT3G and working like swiss watch, no problem whatsoever, been running it for more than 48 hrs allready. Everyting works, no FC's no reboots at all. Excellent work. Waiting for the new improved version. Thanks a lot.
Sent from my HTC Dream SparksMod using XDA App

is there any possible way to update the Launcherpro to v0.7.8.1??? I've tried force closing it, and install over it, but it just fails, and it won't let me uninstall it... any help would be greatly appreciated.

What was your method
Sent from my HTC Magic SparksMod using XDA App

johnson8cyl said:
What was your method
Click to expand...
Click to collapse
not sure what you mean

Method of uninstalling and installing. Or attempted method
Sent from my HTC Magic SparksMod using XDA App

DaMyth said:
is there any possible way to update the Launcherpro to v0.7.8.1??? I've tried force closing it, and install over it, but it just fails, and it won't let me uninstall it... any help would be greatly appreciated.
Click to expand...
Click to collapse
you can remove it via terminal emulator
su (enter)
mount -o rw,remount /system (enter)
rm -r /system/app/appname.apk. this way you can remove any app that is in the system. good luck.

cesarbric said:
you can remove it via terminal emulator
su (enter)
mount -o rw,remount /system (enter)
rm -r /system/app/appname.apk. this way you can remove any app that is in the system. good luck.
Click to expand...
Click to collapse
If I'm right if you have the new launcher.apk in your sdcard then after you do this you can copy the new one to its spot from your sdcard.
cp /sdcard/appname.apk /system/app (enter)
reboot (enter)
Let it reboot and you should have the old removed and replaced with the new.
Correct me if i'm wrong.

Ni
johnson8cyl said:
If I'm right if you have the new launcher.apk in your sdcard then after you do this you can copy the new one to its spot from your sdcard.
cp /sdcard/appname.apk /system/app (enter)
reboot (enter)
Let it reboot and you should have the old removed and replaced with the new.
Correct me if i'm wrong.
Click to expand...
Click to collapse
Sent from my HTC Dream SparksMod using XDA App
If you have the new apk in your sdcard you can use that command to installe it or any file manager apk like astro or any of your choice.

cesarbric said:
Ni
Sent from my HTC Dream SparksMod using XDA App
If you have the new apk in your sdcard you can use that command to installe it or any file manager apk like astro or any of your choice.
Click to expand...
Click to collapse
Also make sure to do a nandroid backup, just to be in the safe side.

Please refer to the g1 android development link on the OP, this thread is out-dated, and I don't have enough time to manage both threads right now.

[All ROMs] [Debloat] [Optimization] Android Acceleration Strip - Performance

What does this do?
This flashable ZIP file attempts to speed up Android OS by implementing tweaks and removing programs that the average Android user may not utilize. It also adds build.prop tweaks, init.d tweaks and a hosts file all aimed at one goal, to reach Android's maximum performance.
Before doing anything, be sure to backup with recovery since things might go wrong.
How to install/update:
First things first, YOU HAVE TO DOWNLOAD A 3RD PARTY LAUNCHER AS THIS MOD REMOVES THE DEFAULT LAUNCHER. I recommend Nova Launcher
1. Download ZIP and transfer it onto your phone's downloads folder (much easier if you download it through phone)
2. Boot into recovery mode and make a BACKUP first before flashing!
3. Flash the downloaded ZIP file.
4. After the process, wipe dalvik-cache and cache partitions (you do not need to format data)
5. Done! Now boot into the system and wait for the boot process to take you to lock screen (should take longer than usual, maybe about 1-10min. Don't be scared if your phone is taking longer than usual)
6. Open Settings > Apps > ::: (3 dots on the top right corner) > Reset app preferences (If you do not have this step, you can skip)
7. Done! After flashing, I recommend calibrating battery (you do not need to do this every update!)
NOTE: For a while, it may seem that Android's performance is worse and the battery is slower. Give it some time to adapt to the new changes
For updates, just download the updated ZIP and follow the installation steps again! Easy peasy.
Common Issues:
Boot Loops
Black Screen on Startup
Phone won't boot
Settings do not respond when opened
Certain apps lost functionality
Spam messages saying: "Unfortunately android.app has stopped working"
Notifications not working
Any issue that comes up, restore it from backup. Usually, uninstalled system apps are what cause these issues. To prevent them, you will need to remove some lines in the updater-script in my ZIP and reflash it. Be sure to report any bugs you find so they can be fixed right away!
Compatibility:
This ZIP file should be compatible with all ROMs (stock-based, AOSP-based and even stock), mods, devices and Android versions, but it was specifically tested and built around an S7 Edge (G935W8) running stock-based ROM (Superman ROM v3.0.1).
Tested on:
- LineageOS 16.0 ROM Android P
- Superman ROM v3.0.1
- The Galaxy Project
Changelog:
1.5.2
- Added more programs to debloat list
- More ads blocked in the hosts file
- Added more build.prop tweaks
1.5.1
- Tested and working
- Programs in updater-script are now sorted in alphabetical order for easier finding
1.5beta3 *UNTESTED*
- Added a LOT more BuildProp tweaks (115+ lines!)
- Added mxt224_ts_input.idc (makes touch screen better and responsive)
- System apps are now included in Doze
- Added sysctl.conf (extra protection)
- Added a LOT more init.d tweaks
- Added local.prop (values for performance)
- For older versions, visit - https://forum.xda-developers.com/s7-edge/themes/roms-android-acceleration-strip-t3841643
1.5beta2 *UNTESTED*
- Fixed the HOSTS file
. - Remove invalid rows
. - Added 13,000 new lines (now containing over 61,000 lines!)
. - Removed useless lines
. - Sorted alphabetically
. - Removed empty lines
1.5beta *UNTESTED*
- Added a LOT more Init.d tweaks (increases performance by managing cpu and ram better and many more)
- Added a LOT more BuildProp tweaks (increase performance)
- Added a hosts file (contains over 48,000 lines!) that blocks malware and ads, thus increasing speed
1.4.1
- Tested and fixed some issues. Includes all changes below.
- Ignore the error, "failed to mount /cache". It will function regardless
1.4beta3 *UNTESTED*
- This version has not yet been tested so it might not work and will probably give an error 7 in TWRP (if it does not give an error, please let me know)
- Included v1.3.3 changes
1.4beta2 *UNTESTED*
- This version has not yet been tested so it might not work and will probably give an error 7 in TWRP (if it does not give an error, please let me know)
- Added buildprop tweaks
- Does not include v1.3.3 changes
1.4beta *UNTESTED*
- This version has not yet been tested so it might not work and will probably give an error 7 in TWRP (if it does not give an error, please let me know)
- Added init.d tweaks
- Does not include v1.3.3 changes
1.3.3
- Added ADAPT SOUND and PRINTERS to debloat list
1.3.2
- Added a build prop tweak to utilize hyperthreading
1.3.1
- Added more apps to debloat list. Expect more apps to be added in the future
1.3
- Added more to debloat list
- Added buildprop tweaks
- This should fix error 7 in TWRP
- COMING SOON: Init.d tweaks
1.2.1
- I'll add build.prop and init.d tweaks when I can
- More apps to added to debloat. BACKUP
- After flashing be sure to wipe cache and dalvik
1.2 - DO NOT DOWNLOAD. ERROR IN UPDATER-SCRIPT. FIXING IN v1.3
- Added init.d tweaks
- Added BuildProp tweaks
- Added more to debloat list
1.1
-Added more to debloat list, be sure to backup just in case anything goes wrong!
1.0
- Init
Permissions:
- Feel free to take anything from the zip file, however, you must credit me as creator.
- If you are reuploading this on another website, add a link to this xda thread.

123keelos said:
1. Download ZIP (much easier if you download it through phone)
Click to expand...
Click to collapse
It is better if a mirror link also available...
Thanks

HemanthJabalpuri said:
It is better if a mirror link also available...
Thanks
Click to expand...
Click to collapse
I'll try to get a mirror up. Also, how does a mirror link being available make it better?

123keelos said:
I'll try to get a mirror up. Also, how does a mirror link being available make it better?
Click to expand...
Click to collapse
Since I cant able to download the attachment.. it shows error..
Thanks

HemanthJabalpuri said:
Since I cant able to download the attachment.. it shows error..
Thanks
Click to expand...
Click to collapse
I see. Check the description, I uploaded a mirror link

Hi it's really efficient for battery and performance or not? I've a custom kernel and custom stock rom. I use ex Kernel manager for tweaking my kernel with naptime and servicely too, thx in advance. In deepsleep my phone loose only 4% in 8 hours.

narco14 said:
Hi it's really efficient for battery and performance or not? I've a custom kernel and custom stock rom. I use ex Kernel manager for tweaking my kernel with naptime and servicely too, thx in advance. In deepsleep my phone loose only 4% in 8 hours.
Click to expand...
Click to collapse
- Battery Life: Will be a bit better since it removes aps that would run in the background. It also adds performance settings that would drain the battery a little bit, but overall, it would be better
- Performance: It will improve since not as many apps are running in the background as opposed to stock
I, too, use a custom ROM and kernel.

Can I flash by Magisk Manager? or TWRP only?
My device arch is x86. can I use?

Hi! I have a problem, I can't access system or any data from TWRP, so I can't flash your zip even through sideload.
Can you make a Magisk version? It would be great!

dhampire said:
Can I flash by Magisk Manager? or TWRP only?
My device arch is x86. can I use?
Click to expand...
Click to collapse
I dont know about flashing with Magisk so I think it's best that TWRP is used.
No devices (are known) are incompatible with this zip file so you can flash it on any Android

evilarthas said:
Hi! I have a problem, I can't access system or any data from TWRP, so I can't flash your zip even through sideload.
Can you make a Magisk version? It would be great!
Click to expand...
Click to collapse
I dont have any experience with making a Magisk version.
Go to TWRP, click on Mount and check System then press BACK (dont click mount system). This probably would fix your issue.

Hi, first of all thank you for your effort.
I can't get your mod working on my phone. I removed some essential lines from update script, then I even formatted data in order to have access to my system and data and then flashed. It says that it can't get access to /cache. However, as I can observe, the patch is applied. I boot up my phone and have another welcome application, I proceed and then it is stuck on "Android is starting". Very disappointed, wanted this mod to work and to get the bloat out of my phone.
My phone is sm-935s. TWRP is installed, as well as Magisk.
Stock oreo 8.0.0

evilarthas said:
Hi, first of all thank you for your effort.
I can't get your mod working on my phone. I removed some essential lines from update script, then I even formatted data in order to have access to my system and data and then flashed. It says that it can't get access to /cache. However, as I can observe, the patch is applied. I boot up my phone and have another welcome application, I proceed and then it is stuck on "Android is starting". Very disappointed, wanted this mod to work and to get the bloat out of my phone.
My phone is sm-935s. TWRP is installed, as well as Magisk.
Stock oreo 8.0.0
Click to expand...
Click to collapse
For me, it says that cache cant be accessed after I flash it. It still works for me even though. This error can be ignored
As for the Android starting stuck, it means that the updater-script is removing some applications that are necessary for a functioning phone. You will have to do some experimenting and remove lines until you find the issue.

Hi, 1.5.1 working without issues and without deleted some lines in updater script ?

It works on S7 Edge ?

dawidk750i said:
It works on S7 Edge ?
Click to expand...
Click to collapse
man, did you read OP???
Compatibility:
This ZIP file should be compatible with all ROMs (even stock), mods, devices and Android versions, but it was specifically tested and built around an S7 Edge running stock-based ROM (Superman ROM v3.0.1).
Click to expand...
Click to collapse

I tried v1.5.1 on my Moto X4 (Android 9) and have error 7 in TWRP..

My phone just become worse

In the first message, there are so many errors written that unfortunately the human is hesitant to install.
For this reason, many people may think again when they want to install it.

Error in flashing on GT-N7000
Failed to mount '/cache (No such file or directory)'