[Q] My JAMIN ROM Disk had been formated ,Help Plz - JAMin, XDA Neo, S200 Software Upgrading

Please help me i by mistake formated the Rom Disk using my PC where in WM5torage i selected the Chip Disk to be mounted as USB Flash and with my PC i formatted the flash Disk, after that the message ''' cant reach to the host,'' from WM5storage software and i hard reset the device but the device now in Boot mode/RedGreenBlue screen shows IPL1.00 SPL2.13 with USB word at the end of the screen and the USB cable plugged from the device to the PC but the PC dont regonize that a usb device pluged in at all , so what can i do , is there is a way to setup new WM5 Rom from the SD card , PLZ Help me soon as the battery now about 80% and i removed it away from the device, thanks in advance .

Related

Reg Issue?

Hi guys,
I have a T-Mobile Ameo 16Gb but im unable to see the internal storage on the device. All i have in the memory options are Storage Card. Not the internal storage.
Anyone got any ideas?
Presumably you don't have it connected to the PC in 'disk drive ' mode do you?
If that's the case then the drive is demounted from the mobile OS.
Have you tried a soft reet? It may also be worth going Start/settings/connections and tapping USB to PC and making sure Activesync is selected.
If none of that works then I'd try a hard reset and if that doesn't work the device is probably faulty .
Or... somebody has uploaded a rom from X7500/X7501, which does not have drivers for 16Gb Flash Drive.

[Q] Help my Qteck 9000 is dead !

hay guys i have problem ;(( my Htc Universal is dead. When i try to reinstal my rom my pocket was be excluded from my pc and now it stay without windows and i cant get connec with my Pc computer does not recognize my device and i cant flash new rom.... Can i install new rom on my Sd card or other withou active sync ((( Without USB cable... i can upload files to SD card with Card reader)))
Yes you can either install from SD card or try using MTTY or Doc format tools
Have a deep read on my signature link, you´ll find all you need
Good luck,

[Q] Cant connect USB mass storage

I flashes faux 2.3.5 ROm but now when i try connecting USB cable , i cant transfer data from my computer ...
When i click on the memory card n my computer
"Please insert a disk into drive e is the error message i get "
enable usb debugging and mount, works for me.
But i dont have an external sd card ...My internal SD card isnt being read ...do we need to partition sd or something??
Try this:
http://forum.xda-developers.com/show...postcount=1465
[edit] Bad link. Try this:
http://forum.xda-developers.com/showpost.php?p=13636060&postcount=1465
did you install the lg drivers to your computer? if you haven't then that's your problem.

[Q]

Hi, im vroya and still new here. When i connect my phone (GT-S7500) to pc via USB mass storage, my pc only detect my ext SD only. And when i tried to disconnect from pc, my phone doesn't detect my ext sd again. but after i reboot my phone, my ext detected again. What is the solution? Pls help me.Sorry for bad english.
Vroya said:
Hi, im vroya and still new here. When i connect my phone (GT-S7500) to pc via USB mass storage, my pc only detect my ext SD only. And when i tried to disconnect from pc, my phone doesn't detect my ext sd again. but after i reboot my phone, my ext detected again. What is the solution? Pls help me.Sorry for bad english.
Click to expand...
Click to collapse
use original data cable !!
and secondly install kies for best driver support!!!
vickyg.coolest said:
use original data cable !!
and secondly install kies for best driver support!!!
Click to expand...
Click to collapse
I use original usb cable. Maybe my usb cable have some problem? Thanks for your advice
Vroya said:
Hi, im vroya and still new here. When i connect my phone (GT-S7500) to pc via USB mass storage, my pc only detect my ext SD only. And when i tried to disconnect from pc, my phone doesn't detect my ext sd again. but after i reboot my phone, my ext detected again. What is the solution? Pls help me.Sorry for bad english.
Click to expand...
Click to collapse
1.It is recommende to install kies so that your phone drivers are installed properly.
2.If it fails you can use kies air via wifi to connect
3.if the problem is not gone try restore factory settings

[Completed] lenovo vibe p1m40 usb stuck in charge only

hello
when i plug my phone to any pc just charge only..no storage mass >>nothing happend in pc ....
i noticed alos that the charging ampere getting very low ....
i made factory reset and same problrm
please heeeeeelp
Any heeeeeelp
Hi !
Do you have the MTP drivers correctly installed for your device ?
Connect your device to a PC using the USB cable.
The device will automatically pop up as a USB computer connection. Tap Open the USB storage device.
If the USB computer connection does not pop up automatically, drag the Notification bar downward.
Choose the connected USB device and open USB storage. You will not be able to access the SD card in your device while the device is connected as USB storage. Set the SD card as USB mass storage to copy files between a PC and the SD card.
Cheers !
The problem in the phone ...cause i plugged the phone in many laptops and same problem ...
Is there any update or patch i can fix this ?
The only way i can fix is through recovery start up ....
My phone charging ampere is 400 ma after this bug
Heeeeeeeeeelp

Categories

Resources