[Q] Cant connect USB mass storage - T-Mobile LG G2x

I flashes faux 2.3.5 ROm but now when i try connecting USB cable , i cant transfer data from my computer ...
When i click on the memory card n my computer
"Please insert a disk into drive e is the error message i get "

enable usb debugging and mount, works for me.

But i dont have an external sd card ...My internal SD card isnt being read ...do we need to partition sd or something??

Try this:
http://forum.xda-developers.com/show...postcount=1465
[edit] Bad link. Try this:
http://forum.xda-developers.com/showpost.php?p=13636060&postcount=1465

did you install the lg drivers to your computer? if you haven't then that's your problem.

Related

[Q] How to change ROM without using USB Cable OR SD Card?

Hello there..
Previously i already rooted my phone HTC Desire. But after i change a few ROM's, have some error on progress. but i'm not sure what the actual problems. After that my phone can use BUT i cannot access my SD Card,i cannot use my camera/video,Bluetooth even when i plug my USB Cable,it NOT show DISK DRIVE for me to select. My question is, without access to SD Card and USB Cable, how to change my existing ROM's to another?..
*Hopefully the expert person can help me.
Please be advise.
Regards & Thank you Guys...
-faizal from Malaysia-
The simplest suggestion would be to remove the SD card from the phone and use a card reader to place a new ROM on it.
If this doesn't work for some reason, you can connect to your computer via Wifi and use ADB to push a new ROM onto the SD card. However, if your phone won't mount the SD card when you plug in the USB cable there is probably something wrong with the way it is communicating with the SD card.
An external card reader is your best bet.
Just to double check - can you access your SD card when you boot the phone in recovery mode?
AaronLMC said:
The simplest suggestion would be to remove the SD card from the phone and use a card reader to place a new ROM on it.
If this doesn't work for some reason, you can connect to your computer via Wifi and use ADB to push a new ROM onto the SD card. However, if your phone won't mount the SD card when you plug in the USB cable there is probably something wrong with the way it is communicating with the SD card.
An external card reader is your best bet.
Just to double check - can you access your SD card when you boot the phone in recovery mode?
Click to expand...
Click to collapse
The problem is, i can't access my SD card from my phone and recovery mode. and also when i plug in USB cable to PC,it just show can charge only. As i know, we ONLY can flash new ROM just from SD Card. is that have another way to do it?

USB wont connect to computer

When I plug the phone into the computer it says on the phone "There was a problem turning off USB storage. Check to make sure you have unmounted the USB host, then try again." Help?
anyone? i need help fast!
bump 10 chars
It connects if I click mount sd card and then mount usb storage through recovery, but I dont want to have to go to recovery just to connect to the pc.

[Q] Faves Pad - model yx10a03

I have a faves pad 10.1 model yx10a03, and i'm having trouble with storage.
When I go to settings and storage it says I have total space 0.00, even with an 8gb msd card installed. so I'm thinking the tab has lost all its mount points.
I have tried 6 different micro sd cards as well and none of them seem to be recognized, I get a message " preparing sd card then nothing registers.
What do I do? I can get apps to install , but anything that needs more space like google earth etc fails during install.
Some one help...I can't find a firmware update or a custom rom from anywhere.
Iv'e tried factory data reset, no joy. I need a total system reset but not sure how.
Scott
When you connect to your computer or using something like Astro can you see or navigate to the "external" memory card drive?
If I connect it without a Micro sd card inserted I get nothing.
But if I connect the pad to my P.C via usb cable with a Micro sd card in it, it registers as external 8gb drive which I can send files to etc.
If I use astro, it sees that the sd card as a mount but nothing inside. Also doesn't show any size or storage available.
I could do with rooting method and put a custom rom on it but can't find anything about it.
theyam_yam said:
If I connect it without a Micro sd card inserted I get nothing.
Click to expand...
Click to collapse
Phone/Tablet inits the device but it's OS (drivers?) can't read the format.
But if I connect the pad to my P.C via usb cable with a Micro sd card in it, it registers as external 8gb drive which I can send files to etc.
Click to expand...
Click to collapse
PC recognized the mounted initialized device and can R/W to the (fat32?) format.
If I use astro, it sees that the sd card as a mount but nothing inside. Also doesn't show any size or storage available.
Click to expand...
Click to collapse
Astro (AFAIK) ques the device's I/O system for file spec and info. It (again AFAIK) just sends commands through the Tablet's OS. Kinda like running LS might in IRIX or some other unix.
I could do with rooting method and put a custom rom on it but can't find anything about it.
Click to expand...
Click to collapse
I have no idea and I'm a total n00b but... I wonder if the Tablet uses a proprietary/virtual FS on the SD card instead of the direct embedded card driver?
Is there anything in the instructions about formatting the card? Did you try to format the card in the tablet yet?
So this would be like when I format an SD card on my Mac... It can no longer be read by any other device until it's re-formatted by a non-mac device... But if mounted by said external device acting as a "card-reader" then the connected Mac can perform I/O normally. Only in this case your tablet is like the mac in that situation. Errr, if that made any sense.
Anyway, try to format the card on your tablet and see if that works.

[Q] pleese help me !!! usb mass storage not recognize and phonutil not work ???

usb mass storage not recognize and solution for this problem is access the phoneutil app with *#7284# for change uart option to modem but in my device with slimbean rom 3.1(android 4.1.2 alpha 3) code for enter phoneutil not work !!! please help me that what i do???? !! sorry for my bad english speaking (
saeid_sds said:
usb mass storage not recognize
Click to expand...
Click to collapse
Have you tried making sure your SD CARD is mounted?
Go to: Settings->Storage
Look at the SD CARD section... If you see "MOUNT SD CARD" then your SD Card is not mounted... Press this MOUNT SD CARD button to mount it. You will now have sd card access and this may also solve your USB issues...
problem not solved !!! how access the phonutil in my rom ???

sdcard visible only via cwm "mount usb storage"

Sorry for the title but I didnt know how could I describe it more precisely.
Problem is. I rooted gf`s htc explorer and I didnt have sd adapter so I tried to format micro sd via minitool partition wizard while it was inside phone connected via usb to pc.
After that I lost possibility to change usb mode from charging to file transfer since my card doesnt show up on pc/mobile/cwm anymore. EXCEPT "mount usb storage" in cwm. With that I see the card in pc, I can reformat it or transfer files. But I cant use it its not visible at all..only in that cwm mount usb storage.
I was browsing web/xda for like 2 hours and im quite desperate.
Any help how to make it visible again?
Its only unlocked-rooted-stock..was preparing it for link2sd.
thank a lot for a help

Categories

Resources