Is it possible to remove that big black screen with 1 button in the middle that appears as soon as i connect the usb cable ?
it would help to know what phone you have...
Related
So I've got a Sensation phone that won't start. Bootloader menu can't be accessed as well. When I plug it in, the orange LED lights up, stays on for about 3 seconds, then goes off for about a second and finally lights up again and stays on permanently. Tried with a different battery - no luck. When I connect it to the pc via micro usb cable, the computer recognizes the phone (installs drivers for htc sensation). And there's something more - when I connect the charger in a completely dark room, the display backlight becomes visible. The screen doesn't light up but it also doesn't remain completely dark. It's like the screen is on but completely black.
So what can I do? Thought that the power button might be defective, so I removed the black tape over the button and short circuited the two small pins on top of the button. It didn't work. I can't fire it up through abd, because usb debugging is off. So do I have any options beside selling it on ebay or giving to a service technician?
Hi
Greetings
try this it might be your last option
http://forum.xda-developers.com/showthread.php?t=1522351
Thanks for the suggestion
I haven't tried this solution yet because the problem does't seem to be a QHSUSB_DLOAD issue.
Upon connection with pc it identifies with hardware id USB\VID_0BB4&PID_0FF9&REV_0228 as a mass storage device...
Hi! I have a problem with a brand new phone i bought the Thl T11.After i unbox it i open the back cover, remove the stickers from battery's contacts and insert it back to the phone.Pushing the power button and nothing happen, neither when i put the charger on, no led light indicate that the phone is charging only a small blinking of the screen.
So far i have made this conclusion(test it):
Charger: OK i put it on other phones and its working
USB Cable: Same as above
Trying with another charger and cable: Nothing happen
Connect to pc: It recognize it as preloader MT65xx and trying to load drivers for the device (no further testing here)
Trying To Hold Power button For few seconds still nothing
Trying key combinations to go to recovery mode (power + volume up etc) still nothing.
So anyone knows what is faulty?I'm plan to buy a new battery, is there any possibilities the seller root the phone and mess up the OS?
Is there any program for pc to connect my phone and see if the software is ok?
Thank you!
tzimaniGr said:
Hi! I have a problem with a brand new phone i bought the Thl T11.After i unbox it i open the back cover, remove the stickers from battery's contacts and insert it back to the phone.Pushing the power button and nothing happen, neither when i put the charger on, no led light indicate that the phone is charging only a small blinking of the screen.
So far i have made this conclusion(test it):
Charger: OK i put it on other phones and its working
USB Cable: Same as above
Trying with another charger and cable: Nothing happen
Connect to pc: It recognize it as preloader MT65xx and trying to load drivers for the device (no further testing here)
Trying To Hold Power button For few seconds still nothing
Trying key combinations to go to recovery mode (power + volume up etc) still nothing.
So anyone knows what is faulty?I'm plan to buy a new battery, is there any possibilities the seller root the phone and mess up the OS?
Is there any program for pc to connect my phone and see if the software is ok?
Thank you!
Click to expand...
Click to collapse
Well, I think you should go to the service centre or to the shop where you bought this device. They should give you a new one, as you have still warranty!
Hi all
I Have a GT-N8000 today i worked with it some
and locked the screen.
after ye while when in press the power button the screen does not turn on
i Plugged-In the charger but no battery icon or Plug-In sound
i connected the tablet to a pc but no statement from pc for a usb device
i am very sad pls help me((((
Could be a dead battery or power button stuck .
No!
When i locked the screen it was 50%
and i plugged-in the charger from night to morning i don't think it is for battery
(No Download Mode-No Recovery)
Well if you say no then it could be the USB port fried or the mainboard .
PC - usb i presume you have swapped the usb cable and have installed Samsung drivers .
But when i plug in the charger after a while the device will be hot:|
Is the problem still form USB cable?:S
My xperia z1 unfortunately fell on the floor that the display is kinda dead now. When I charge it, the notification light still lights up and turns to green when fully charged. The display however, only leaves a white straight line when I turn it on and I think the touch is also dead.
All I want to do now is to extract the data from the phone, but the USB debugging is not turned on and the phone has a password protected lock screen.
As I don't really wanna fix it or use Dr fone(if not necessary), I want to buy a micro USB to HDMI/usb adaptor to connect the phone to an external display and a mouse to control it, but I just don't know whether otg mouse and the hdmi can work properly when connected simultaneously.
Please help or please give me other suggestions.
hi pls help me. i just flashed my samsung tab 2 gt-p3110 cannot enter recovery/download mode cannot do the combination buttons due to my buttons are not functioning, whenever i try to press POWER ON + VOL BUTTONS it only shows up battery icon and it stuck in there. it is not charging and turning on.. my computer cannot recognize it though it does have a sound like plugging and unplugging my cord to the computer. pLS help ...
What if you try to boot without plugging in usb cable
LR7875 said:
What if you try to boot without plugging in usb cable
Click to expand...
Click to collapse
i already did.. but it only shows the battery icon.. it doesnt show the samsung logo. when the battery icon shows it stucks in there it will be gone for about a minute. then when i press a button again same things happen
The battery logo ****ing appears even if no cable plugged in?
LR7875 said:
The battery logo ****ing appears even if no cable plugged in?
Click to expand...
Click to collapse
no , when i tried to connect ,y tab again to my computer it says that no OMAP 4430 installed .. luckily i have installed the OMAP 4430 to my pc.. but then i dont know what to do next..
I mean what if you pull out the cable and press power button