i have done some searching around, and i have yet to figure out exactly what I did wrong... i posted a question in another thread, however due to hostilities being the more prominent things that I am seeing in that particular thread, I am not expecting any kind of reply... therefore since I haven't been able to come across this particular issue in the threads, i'll post it here...
i seem to have gotten myself into a pickle. and i'm not sure what to do about this. maybe someone here can help. it took me quite a while, but i was FINALLY able to get the mt3gs rooted. i'm missing half of the hair on my head after sucking down 3 packs of cigarettes.
I had to use slideroot.zip from another thread but basically followed the directions here, because i continually got the "e: no signature verification failed" errors every single time. I'm assuming its because the ota.zip and the update.zip didn't match up but who knows. as soon as i used the slide_root.zip package it ran smoothly. it worked for me in the end, clockwork recovery loaded, mounted, loaded slideroot.zip from the sd as well as update.zip applied and did all the adb push etc worked great. i now have root. superuser installed, its going on asking permissions for things here and there such as when i installed quickboot from the market for a fast way to get into clockwork recovery so I can flash roms here as soon as I am able. however, clockwork recovery isn't there.... just the basic bootloader and recovery. am i missing something? why didn't it stick....? how can i permanently get it to show up??
Has anyone successfully cooked on Swift Star??? I am super familiar with UOT KITCHEN and for some reason every time I try to flash it goes through says its applying the framework but the end result is always a bootloop...I have used the kitchen on virtually every other rom with no issues Im super confused
is like he said you have to put the zip on the the clockwork/backup on your sd card then reboot into recovery full data wipe and cache wipe then go to restore and choose the zip file there enjoy !!
Ek07 said:
is like he said you have to put the zip on the the clockwork/backup on your sd card then reboot into recovery full data wipe and cache wipe then go to restore and choose the zip file there enjoy !!
Click to expand...
Click to collapse
this post makes no sense. you don't seem to understand the OP or know what you're talking about (you don't install zip files through the restore function in cwm).
to the original poster, I have only used the UOT Kitchen to customize the boot animation on my Swift star ROM but it worked fine for me. Maybe try changing one category (like just battery icons or fonts) at a time and see if you can get any further.
Good luck
hmm ok thats a good idea.Ill give it a go and see if that works.Thanks for your post..hopefully I dont get another boot loop..I heard others getting boot loops as well I will post my results as soon as I cook and flash again.
Same result..Stupid Boot loop..If anyone could give me the details of what they are doing different to get it to work I would appreciate it..its frustrating to say the least...
frescoraja said:
this post makes no sense. you don't seem to understand the OP or know what you're talking about (you don't install zip files through the restore function in cwm).
to the original poster, I have only used the UOT Kitchen to customize the boot animation on my Swift star ROM but it worked fine for me. Maybe try changing one category (like just battery icons or fonts) at a time and see if you can get any further.
Good luck
Click to expand...
Click to collapse
well i was talking to androidDude21 about why he got a boot loop u seem not to understand his question , thats how you intall that rom he is asking about ok
Sorry eko7 but i think he already has installed the ROM and just needs to know why when he alters it with UOT kitchen he is getting boot loops. Didn't mean to offend. I admit I came off sounding like an ass.
androiddude- I just tried changing the battery icon with UOT kitchen on my swift ROM and also got the boot loop. wish I was savvy enough to debug the issue. Let us all know if you make any progress. I would really like a battery icon that also shows the % of charge in this ROM.
Running out of Ideas
Yeah I definitely already installed the rom..lol I dunno how that was even in question...not to be rude.. but yeah I have tried numerous times the only thing I can think of is maybe I have to upload the touchwiz files too even though I dont use it..its a long shot but when someone asked about it the Dev said that any mods can be made in UOT kitchen..Unfortunately I don't have enough posts to post a direct question to the Dev in that forum . I like Swift Star a lot but at this point I might just give weapon 2.6 a go because I know you can definitely take that to the kitchen..Its a shame though cuz I really Like this Rom.
ok sorry im new at this but im learning sorry i dont speak all that geeky language lol but my question is are ya tryna customize the rom you own way right??
frescoraja said:
Sorry eko7 but i think he already has installed the ROM and just needs to know why when he alters it with UOT kitchen he is getting boot loops. Didn't mean to offend. I admit I came off sounding like an ass.
androiddude- I just tried changing the battery icon with UOT kitchen on my swift ROM and also got the boot loop. wish I was savvy enough to debug the issue. Let us all know if you make any progress. I would really like a battery icon that also shows the % of charge in this ROM.
Click to expand...
Click to collapse
i know how to change the battery icon is easy just use seven zip the png icons are on the system\framework\framework-res.apk\res\drawable-hdpi\
yeah basically i just wanted my overscroll glow to be blue, change my download bar and loading icon to blue as well to match the rom but every time I try even one at a time I run into a bootloop so I PM'd the Developer hopefully he gets back to me and ill post what he says..
The darn thing just started nagging me with an update notice that comes back every ten minutes. I read somewhere that updating is going to stop me from doing certain advanced things, so I finally got the last push to go for either CM10 or CleanRom, depending on which one gives me the most advanced and pleasant experience.
But before doing so, it's recommended to get some kind of flash info file or something from it that doesn't come out when upgraded to the latest firmware but does on the old 4.0.3. What would be the best way to go from now on?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Found something myself, thank me very much!
http://androidroot.mobi/t3_nvflash/
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
do yourself a favor if you gonna go with a custom rom, Energy rom and TWRP recovery!
What are their advantages when compared to CM10 or Clean?
Sent from my Galaxy Nexus using xda app-developers app
This is really annoying... The guide I found really isn't n00b-proof. I have to figure everything out from scratch here. I hate this as much as I love it...
Other helpful stuff I found:
http://www.youtube.com/watch?v=J3ypzUaKxvo
http://forum.xda-developers.com/showthread.php?t=2034866
Going to edit this post along the way to help me remember what I did...
Edit:
Got the APX drivers installed, but now the device isn't getting the USB icon when I go into Fastboot... Wish me luck...
The Universal Naked stuff does not install ADB drivers for me...
Edit2:
So I tried the 'Have disk...' option, now I got to install ADB drivers. Used the Prime drivers, I hope these are the right drivers. The thread below got me to do this:
http://forum.xda-developers.com/showthread.php?t=1830108
Went and installed JDK and SDK as shown in that thread. Because (no **** sherlock) you need ADB stuff to use ADB stuff.
Edit3:
This is really pissing me off and I give up... It says I already have installed ADB, but ADB is nowhere to be found. I guess I'm an idiot and I can't figure this out on my own, time to go to bed. I hope someone with intelligence drops by here in the meantime. Thanks in advance...
Edit4:
I lay here wondering, is my bootloader unlocked? How can I check? Does this have to be unlocked before I go and try the link I posted in my first reply? Stupid questions of course, but I'm learning here...
Lex_Michdeandroid said:
This is really annoying... The guide I found really isn't n00b-proof. I have to figure everything out from scratch here. I hate this as much as I love it...
Other helpful stuff I found:
http://www.youtube.com/watch?v=J3ypzUaKxvo
http://forum.xda-developers.com/showthread.php?t=2034866
Going to edit this post along the way to help me remember what I did...
Edit:
Got the APX drivers installed, but now the device isn't getting the USB icon when I go into Fastboot... Wish me luck...
The Universal Naked stuff does not install ADB drivers for me...
Edit2:
So I tried the 'Have disk...' option, now I got to install ADB drivers. Used the Prime drivers, I hope these are the right drivers. The thread below got me to do this:
http://forum.xda-developers.com/showthread.php?t=1830108
Went and installed JDK and SDK as shown in that thread. Because (no **** sherlock) you need ADB stuff to use ADB stuff.
Edit3:
This is really pissing me off and I give up... It says I already have installed ADB, but ADB is nowhere to be found. I guess I'm an idiot and I can't figure this out on my own, time to go to bed. I hope someone with intelligence drops by here in the meantime. Thanks in advance...
Edit4:
I lay here wondering, is my bootloader unlocked? How can I check? Does this have to be unlocked before I go and try the link I posted in my first reply? Stupid questions of course, but I'm learning here...
Click to expand...
Click to collapse
Your tablet will say it is unlocked in the upper left part of the screen when The Asus logo appears at boot.
Sent from my Transformer Pad TF300T using Tapatalk HD
Hi, if your tablet is still on stock 4.0.3 (ICS bootloader), I recommend doing NVflash first
http://forum.xda-developers.com/showthread.php?t=1894867
If you have already updated to JB bootloader it won't work.
It doesn't say Unlocked, so I guess that's why I don't see the USB option when I try to get into Fastboot?
I'm also not able to get ADB commands recognized on my win7x64... Am I doing it wrong? What's the proper method/order of events here? Isn't there a really n00b-proof version of a guide here, or is it something I should write as soon as I get out of this mess and get it working?
Sent from my Galaxy Nexus using xda app-developers app
Have a look here for ICS bootloader unlock tool
http://forum.xda-developers.com/showthread.php?t=1667596
pjc21 said:
Have a look here for ICS bootloader unlock tool
http://forum.xda-developers.com/showthread.php?t=1667596
Click to expand...
Click to collapse
Perhaps I'm not really looking in the right location, but the Asus website says I need to choose an operating system and gives me no option to choose. This way I'm not able to download the apk...
Edit:
Tried clicking the links with the tab and it started the download... Device now has an unlocked bootloader. On to the next one...
Edit2:
Ah, now I get it. Pay attention to where that Android SDK stuff is being installed. Mine got installed in the folder I unpacked the installation files! So somewhere 256 folders deep on the Desktop was the right 'adb.exe' file. Make sure the tf300_nvflashpack files are in the same directory and open the command prompt there. After that I got back to the http://androidroot.mobi/t3_nvflash/ website and entered the commands. One moment please, back in a flash!
Edit3:
Now I have 5 files in /mnt/sdcard/AndroidRoot and I uploaded them to my Dropbox. I'm guessing they are the right files...
blob.bin
blob.log
bootloader.ebt
create.bct
recovery.bct
To be sure I uploaded them all.
Copied these files into the SDK folder, along with the other zipped files for nvflash so the nvflash command works to get the other three backup files.
Edit4:
Went on following the guide and checked the video to see if I was really going the right way. Finally I have all files backed up. Goddamn what a journey, but it makes you grow a pair of balls. Now on to the next hurdle, getting a proper ROM, because stock is really getting on my nerves.
So CleanRom, CM10 or Energy ROM? Should I first upgrade to JB? Without or with the popup I'm constantly getting?
Lex,
You have alot of the same questions I do/did, and I have your original post open in another window to respond to all your questions. I'm working on writing a guide for all this stuff so this is rather helpful. If I respond to a question twice, please forgive me as I'm literally just going down the list and answering em as I read em.
In your first post, the file you're referring to is gathered via NVFlash. I haven't used NVFlash yet, but what I understand is that if you use this tool it basically backs up your ICS (4.0.3) bootloader information. The newest firmware change is to Android Jelly Bean (4.1.1) and that re-locks your bootloader. Once you go to JB, you cannot go back. So this servers as a backup (again, this is just how I interpret the information from their website. I don't know how correct my interpretations are, and have actually opened a thread to ask for clarification about this program).
For the drivers, all I did was download the android SDK and install the 'android tools' and "extra - google drivers' from the list. My laptop was just recently wiped-out so I have no prior drivers installed, nor have I connected my tablet to my computer yet (just got a replacement tablet last weekend). I didn't use the universal driver or any other add-ons. Just use the SDK, it will install drivers, and then it will detect your device. I verified this by typing "adb devices" in command prompt and it detected the serial # of my device.
Within that same post, you had some confusion about ADB. It's just an executable, and you have to use the command prompt window from whichever directory it is installed to. So once you unzip the Android SDK or wherever you installed ADB to, use the command line commands "cd directory/where/adb/is/installed" to navigate to it, or use shift + right click within that folder and it will have an option to "open command prompt here" with admin privileges. That makes life a bit easier. Other people also install their SDK to C:\android\SDK or something similar, so it's less to type.
In order to determine if your bootloader is unlocked, look at your tablet in the top left hand corner when it boots up. It will say "Device is unlocked" and list a bunch of numbers (which if I remember correctly would just be the firmware information). Your device will not be unlocked until you actually download the unlock tool from asus' website and push the file via adb to your tablet and install it. That is, you have to take a very specific, very advanced overt action to unlock it. Nothing else and no one else can do it for you nor can it be done accidentally.
Next post (#8 in the thread): You are correct that fastboot will not show unless you are unlocked. I just verified this on my not-unlocked, not-rooted new tablet, and cannot enter fastboot mode. Your ADB commands wont work if your drivers are not correctly installed.
Post #10: You have to select "Android" under the OS drop-down box to find the unlocker app. As for the location of the ADB.exe, mine was found in this subfolder within the android SDK: <whereveryouunzippedit>\Android SDK x86_64\adt-bundle-windows-x86_64\sdk\platform-tools
That folder contained the correct (and I think only) adb.exe I needed.
For your last part, I think you should try out a number of ROM's to see which you like best. I've tried all the major ones (CM9, CM10, CleanRom, Hydro, Blackbean, and some of the stock rooted/de-odexed) ROMs and used Blackbean for the longest time because of how slick it looks (all black) and how easy it is on my eyes.
Make sure you document the steps you took so you can remember them in the future. I'm working on writing a guide right now and documenting my steps to go from a stock, locked, and not-rooted tablet to a rooted unlocked and custom flash tablet.
I really hope I was able to clarify some things. I am by NO MEANS an expert but I've spent many hours experimenting and think that I wish I had someone to answer my questions when I was first learning, rather than learning by mistake.
Hopefully this helps,
Opethfan89
Hi, I use Energy rom which I find pretty good, you will need to update to JB first as Energy, CM10 & Clean rom are all JB bootloader compliant. My tab came with JB pre installed so not sure what the best way to update is but would assume since you still have stock recovery would be with OTA update (popup notice). Here is a guide to update to JB but I think this is if you have already installed a custom recovery as it looks like you flash back to stock recovery first, thats why I think if your getting update notice and still have stock recovery, go with that.
http://forum.xda-developers.com/showthread.php?t=1845377
Once you have updated to JB stock here is a guide to install custom recovery (CWM or TWRP), root & install custom roms.
http://forum.xda-developers.com/showthread.php?t=2041627
Here is link to TWRP recovery (I had issues with CWM).
http://forum.xda-developers.com/showthread.php?t=1672108
Hope this helps.
opethfan89 said:
Lex,
You have alot of the same questions I do/did,
[..]
Hopefully this helps,
Opethfan89
Click to expand...
Click to collapse
I can only click the thanks button once, but I clicked the f- out of it that one time. Although I already got to the point where my stuff is backed up, it is really good for my/our fellow adventure-seekers to have an answer to these FAQuestions. It's awesome you took the time and effort to type that much words to help out someone you don't even know. Thanks again!
pjc21 said:
Hi, I use Energy rom which I find pretty good,
[..]
Hope this helps.
Click to expand...
Click to collapse
Same goes for you! Tomorrow I will be trying as much ROMS as I can to see which one suits me best. Also repeating this process is the best way to learn something and since I'm unbrickable, I am going to flash the hell out of it for a few days. I'll try to post my steps and findings here so I (and perhaps others with the same trouble) can benefit from it in the future.
Also I think when you update to JB your bootloader will be locked again (new bootloader), the above guide on root, customs roms also has info and links on unlocking JB bootloader. Glad I could help, have fun :good:
pjc21 said:
Also I think when you update to JB your bootloader will be locked again (new bootloader), the above guide on root, customs roms also has info and links on unlocking JB bootloader. Glad I could help, have fun :good:
Click to expand...
Click to collapse
It's upgrading now. Of course I forgot I lost root with the last OTA update and I forgot to make sure I rooted the thing so it was able to use the rootkeeper after upgrading to JB. I hope there is some documentation on rooting JB, because at the time this all happened root was not possible yet. It's past 1 AM over here, so I guess it's best to save this quest for later when I had some sleep.
Edit:
Just for kicks I tried 'Root Checker' and it said 'no root'. Then I saw 'Rootkeeper' was installed. Opened it up, tapped the restore button... Device rooted! Guess my memory is really failing big time... One down, # to go.
Edit2:
Installed TWRP:
Just downloaded the .blob from their website and
put it in the platform-tools folder.
Then renamed it to TWRP.blob.
Turned off tablet,
plugged in USB cable in the tablet ONLY,
hold volumeDown button,
plug into laptop holding button,
waiting...
choose USB logo,
open cmd-line in the platform-tools folder,
run command: "fastboot -i 0x0B05 flash recovery twrp.blob"
waiting...
Done. Let's see if it works...
Edit3:
At first I didn't understand how to get into TWRP (DOH!),
Hold volDown, power on, choose RCK.
Edit4:
Been having a fight with TWRP when I try to install CM10.1 (latest nightly: 20130121). Gives me an error status 7 or something...
Code:
Verifying update package...
assert failed: getprop("ro.product.device") == "tf300t" ||
getprop("ro.build.product") == "tf300t"
E:Error in /external_sdcard/CROMS/****.zip
(Status 7)
Error flashing zip ' /external_sdcard/CROMS/****.zip'
Of course, ****.zip is a long filename I didn't want to type completely here.
Will try to figure out whats wrong later today, first I'm going to try restoring the backup I made earlier, just to see how a complete backup works when the tablet is wiped back to factory settings.
Edit5:
The backup stuff is really cool! My tablet is back the way it was even though I wiped it completely!
Back to the ROM rumble... baked_tf300t_blackbean-6_jb-bl_b6.zip gives me the same error. Starting to get annoyed again... Let's try something different, CleanROM. Download is taking ages... I'm restoring again, so I can use the tablet for the rest of the day. As soon as I feel like it I will try again, for now I'm giving it 'the finger'.
Edit6:
Cleanrom is installing now. I guess CM (baked is CM based right?) was causing some trouble...
Done installing...
Wipe Cache/Dalvik...
Reboot...
Android is upgrading...
Might need to choose the small font, my screen is really clogged up with stuff. Didn't expect to keep my settings etc., thought it would be completely wiped. I'm going to restore and then reinstall with the highest DPI setting first, then I'll wander around the rom to check if I like it.
Edit7:
I think I'll stick with this one for a few days, runs fine if you ask me, maybe take the time to finally update my Galaxy Nexus to CM...
i don't know if this questions have been asked 'coz there are more than 1000 pages of questions and to look on all of them means to lose prolly more than a week...
well,i did install that rom,T.R.I.D rom on my gt-s6310,thing is that now when i was trying to push the the other 2 files i got into a problem,i entered in the download mode and when i typed adb devices....suprise,no way to find my device conected to usb,i tryed many times and still nothing,so how can i push that file if the device is not seen ? i have to say that i didn't had that problem be4 installing that rom,so i will like to know if there i missed something or not,i do have installed all in my pc to can make those changes but for some reason i can't see my phone connected,i have in my phone those 2 options activated too...
the other problem i've found was when i did installed the new icons zip file thru the CWM as it said i have to do it and wow,my phone remained stuck on the recovery loop,every time i was rebooting,the phone was getting back in recovery...
i thank very much if someone can help me solve those 2 problems...
i do like very much that custom rom on my phone,it's pretty amazing.
or maybe is another way to push those files without the adb ? maybe using kitchen somehow ? i'm not an advanced user in those things,but maybe someone can explain it to me how to do it if can be done that way...
thank you very much for any help