Database Info

Touch Diamond Replacement Housing!! Help!!!!

I just dropped my diamond by accident while running to my car to avoid the rain =="....
It was in a PDA case, but it still somehow popped out of the case and got scratched up...
So I am in DIRE NEED OF A REPLACEMENT HOUSING!!!
lucky for me, the only damaged parts were the metal rim around the front side of the phone and the battery cover...
I am thinking of just getting an extended battery so i can get a new battery cover with it as well.
But I can't find the Replacement part for the rim around the front of the phone...
I took a lot at the phone and it seems easy enough to replace the rim....but i need to find the part first....
Please guys, any help will be very much appreciated....
Really need this housing replacement...can't stand looking at my scratched up diamond =(

phones still in its early stages so gonna be hard to get hold of housing so quick. Usually best place is here
http://cnn.cn/shop/touch-diamond-c-277_533.html
but they only have screen and back plate at the moment
just be patient a little bit longer.

does that shop deliver quickly??
would it be possible to ask for oem parts directly from htc...?
i talked it over with htc canada today and it may cost upwards 100 CDN to fix the cosmetic damage =(

no insurance?

uh no...i've never insured a phone before....
never thought it would the belt clip would break and let the phone fall and get scratched =="
argh...
any ideas on what to do...
should just take out the rim and touch it up myself ^^"....

oh i've got an idea =D!!!!
I can buy a dummy phone and replace it directly that way...
right.....?

pizzachips said:
oh i've got an idea =D!!!!
I can buy a dummy phone and replace it directly that way...
right.....?
Click to expand...
Click to collapse
In a very rare occasion you can use dummy phones.
Mostly the inside is completely different, no way of using those dummies for housing parts.
Haven't seen a dummy Diamond yet, so I can't tell if it is usable, but mostly HTC dummies aren't usable.

the-equinoxe said:
In a very rare occasion you can use dummy phones.
Mostly the inside is completely different, no way of using those dummies for housing parts.
Haven't seen a dummy Diamond yet, so I can't tell if it is usable, but mostly HTC dummies aren't usable.
Click to expand...
Click to collapse
i'm just lokoing to replace the outer rim on the front side of the phone and the battery cover....?
so maybe its possible...
ill drop by a local mall and see if its possible i guess....

loads of dummy diamond phones on ebay the last time i check it out.

i wouldn't say loads...
i saw a total of 4 =P lol
average 20-30 dollars CDN
which is fine for me if i can use it as housing and battery cover replacement
anyways heading out to check the dummy model =)

it doesn't work =(
its one giant piece, so i can't really take it apart to replace the piece i want...

How hard is it to take apart the diamond?
The invisible shield really stuffed up my screen. I can see parts flaked off the screen (looks like a thin protection layer) which is believe is the touch sensor itself. It has not affected the use of the phone but looks ugly.
EDIT: Home from work and did a search and found this: http://www.pdacenter.ru/razborka/razbor-htc-touch-diamond/
Looks like a lot of work to get to the digitizer.

wow amazing find...was looking for a page like this...
aw man...the housing is one whole piece from what i can tell from the last picture...guess a DIY housing replacement is not really gonna be easy....
i'm gonna ask HTC for an estimate....
just minor cosmetic damage on mine on the corners so nothing too huge but it pains me to see it every time =(
at least this seems a bit easier than fixing the iphone....its so much work to put in a new digitizer cause of the way the housing is built

Looking for the Telus Black rear cover
If anyone finds a place that is selling the black rear battery cover for the CDMA version of the phone i would be interested.

anyone have any lucking finding a replacement housing?

I can provide the replacement housing
It cost about 36 euro

Like this??
http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=350260913226&ssPageName=STRK:MEWAX:IT

[Q] Bezel around the screen - replacement??

Hi
I have damaged the metallic black bezel around the screen at a few places (especially the part above the micro usb port). I guess it is called Faceplate.
What I wanted to know is if I can replace this part somehow. If I look at the region under the screen after opening the slider, it appears as if it can come off.
If it is possible to replace it, does anyone know where can I buy one of these?? I have googled but could not find anything.

I have found only a full cover. Try searching milestone 2 housing on eBay.
Or here is the link:
http://www.ebay.de/itm/Cover-Housing-for-Motorola-A955-Droid-2-Milestone-A-955-/300572186204

---UFO--- said:
I have found only a full cover. Try searching milestone 2 housing on eBay.
Or here is the link:
http://www.ebay.de/itm/Cover-Housing-for-Motorola-A955-Droid-2-Milestone-A-955-/300572186204
Click to expand...
Click to collapse
Thanks dude. Now I have to find someone who can deliver it to India. BTW are you sure Droid 2 is physically exactly same as Milestone 2. They do appear same. Just wanted to know if someone has used this cover etc. Plus anything on the quality??

sahilarora911 said:
Thanks dude. Now I have to find someone who can deliver it to India. BTW are you sure Droid 2 is physically exactly same as Milestone 2. They do appear same. Just wanted to know if someone has used this cover etc. Plus anything on the quality??
Click to expand...
Click to collapse
I've ordered one from the link above and I should receive it in the next 7-14 days so I'll let you know how I go but I'm 100% confident that the physical housing between the MS2 and D2 are identical.

I have received the housing (from the eBay link above) and fitted it last night. The case is a Verizon stamped unit and is 100% perfect, next time I think I'll just live with the worn look. Very fiddly job but does give you an appreciation of the engineering ... They use a lot of adhesive, pita.

Well I have managed to knick the display input cable and now have a one centimetre row smack in the middle of the screen that won't respond to touch. My fault, I thought I'd taken care to ensure no damage to some of these fragile cables but alas no
So, just ordered a SGII Stick that where the sun doesn't shine Motorola! Yeah, I know you couldn't care less but I feel better

Well thanks for the info. I won't have the luxury of buying a new one if I ruin my MS2 so I guess I'll stick with a little wear and tear. BTW nice buy!!

Or just take it to your nearest phone repair shop and they'll sort it out. =D

MegaBubbletea said:
Or just take it to your nearest phone repair shop and they'll sort it out. =D
Click to expand...
Click to collapse
Funny bugga, this is BrisVegas!

nurofenplus said:
Funny bugga, this is BrisVegas!
Click to expand...
Click to collapse
Haha true
Sent from my MotoA953 using xda premium

nurofenplus said:
I have received the housing (from the eBay link above) and fitted it last night. The case is a Verizon stamped unit and is 100% perfect, next time I think I'll just live with the worn look. Very fiddly job but does give you an appreciation of the engineering ... They use a lot of adhesive, pita.
Click to expand...
Click to collapse
How does the housing attach to the digitizer/glass? Because the tutorial I found on iFixit didn't detach the digitizer from the housing.
My housing cracked badly, I "fixed" a corner with superglue, but I think it permeated through the digitizer, so there's a strip in the left side (the one with the MENU button) which is insensitive. Another drop and the whole top part fell off and I don't intend to glue this one. Probably I'll buy a new front panel and a new digitizer, but I need to know if I'll be able to attach them at home or if I'll need some adhesive (yuck).
Thanks in advance! :fingers-crossed:

Just a question on replacing the digitizer

Something has been confusing me for a while. When you purchase a digitzer without a housing, how do you attach it to said housing?
I'm planing on buying a white lg digtizer + new housing (as i dented mine after a few nasty drops), but noticed the white ones are only the digitzer, and do not come with any adhesive. Do I just "force it in"
Edit: Damn, Had multiple threads open, will ask to have it moved to Q & A
EDit2:
Found some adhesive. Would this "kit" work?
http://www.ebay.ca/itm/Frame-Front-...608?pt=LH_DefaultDomain_0&hash=item2c657e56d8
http://www.ebay.ca/itm/Touch-Screen...212?pt=LH_DefaultDomain_0&hash=item4ab648c8cc
http://www.repairsuniverse.com/adhesive-strips-for-touch-screens.html

Anybody?
I have 85 views and zero replies

The digitizer i bought for my brothers galaxy s2 only required me to attach the little ribbons and screw it down. I'm sure it's similar on our phone.
Sent from my Steel Blue Phoenix.

Blazing angel said:
Something has been confusing me for a while. When you purchase a digitzer without a housing, how do you attach it to said housing?
I'm planing on buying a white lg digtizer + new housing (as i dented mine after a few nasty drops), but noticed the white ones are only the digitzer, and do not come with any adhesive. Do I just "force it in"
Edit: Damn, Had multiple threads open, will ask to have it moved to Q & A
EDit2:
Found some adhesive. Would this "kit" work?
http://www.ebay.ca/itm/Frame-Front-...608?pt=LH_DefaultDomain_0&hash=item2c657e56d8
http://www.ebay.ca/itm/Touch-Screen...212?pt=LH_DefaultDomain_0&hash=item4ab648c8cc
http://www.repairsuniverse.com/adhesive-strips-for-touch-screens.html
Click to expand...
Click to collapse
i believe that "kit" would work. i dont see the need for the last item. as the first item comes with adhesive, and the digitizer itself should come with some adhesive in the back of it. atleast they usually do. but you can buy it for self insurance

juny51 said:
i believe that "kit" would work. i dont see the need for the last item. as the first item comes with adhesive, and the digitizer itself should come with some adhesive in the back of it. atleast they usually do. but you can buy it for self insurance
Click to expand...
Click to collapse
Wow, I'm an idiot. I didn't even bother to look at the frame :good:
Now, I hope the white digitizier will actually work!
Any reviews on em?

Blazing angel said:
Wow, I'm an idiot. I didn't even bother to look at the frame :good:
Now, I hope the white digitizier will actually work!
Any reviews on em?
Click to expand...
Click to collapse
ive seen a few on hear, no complains that i know of

http://www.ebay.ca/itm/TOUCH-DIGITI...ltDomain_0&hash=item2c65e1d34e#ht_1413wt_1396
http://www.ebay.ca/itm/Original-NEW...611?pt=LH_DefaultDomain_0&hash=item2a16427d33
http://www.ebay.ca/itm/Original-NEW...ltDomain_0&hash=item3cbeabd943#ht_1858wt_1163
Which one of these would you guys get?

Blazing angel said:
http://www.ebay.ca/itm/TOUCH-DIGITI...ltDomain_0&hash=item2c65e1d34e#ht_1413wt_1396
http://www.ebay.ca/itm/Original-NEW...611?pt=LH_DefaultDomain_0&hash=item2a16427d33
http://www.ebay.ca/itm/Original-NEW...ltDomain_0&hash=item3cbeabd943#ht_1858wt_1163
Which one of these would you guys get?
Click to expand...
Click to collapse
be careful not to buy the cheap bad adhesive , some bad types doesnt hold the digitizer well enough , falls soon,
i think its better to buy it with the frame attached , much easier to assemble

The problem is no white ones come with attached frames
Have you had a bad experience with adhesive?
Sent from my LG-P999 using xda app-developers app

Anybody know a us seller that sells the housing? I need one, but don't want to wait a month for it.

Dropped my phone on concrete :(

And now the pristine MAO case has some horrendous chips and scratches, and I'm really pissed off.
I can't seem to find a reliable or legit looking seller on eBay that will sell a genuine MAO case, the new bevelled USB version. I'm based in the UK, but wouldn't mind buying from an international seller that ships to the UK also. Does anyone know of any good eBay sellers selling genuine HTC parts?
Failing that, does anyone know roughly how much it would cost if I were to send it back to HTC to replace it? I asked HTC support but they don't sell spare parts and can't give a quote unless I send the phone first. Any estimate would be great.
Thanks.

Anybody..?

djsubtronic said:
Anybody..?
Click to expand...
Click to collapse
I'd say you're pretty lucky the screen is intact. Get some black nail polish and fill in the chips, then put one of the super thin cases/skins on it.

el_smurfo said:
I'd say you're pretty lucky the screen is intact. Get some black nail polish and fill in the chips, then put one of the super thin cases/skins on it.
Click to expand...
Click to collapse
The chips are pretty bad. Nail polish is gonna look hideous. Plus the whole point of this phone was to not put it in a case. I'm usually very careful with dropping a phone, this is the first time it's ever happened in my life.
I think I'm just gonna buy a housing off eBay and replace it. And if the housing turns out to be crap (even though they assure it is genuine) then next step would be to insure it and then make a claim.

Hi,
I got a MAO back cover from here: http://www.parts4repair.com/htc-one-s-back-cover/
I asked by e-mail and they say it's an original HTC repair part. I received and replaced the cover and it is indeed indistinguishable from the original. I don't know how it will hold out over time, though.
Before ordering the back cover, I asked an authorized HTC repair service in Switzerland about the repair cost; they said 59 CHF for the cover + labor costs. Like in your case, they cannot estimate labor costs without seeing the phone.
I replaced the back cover myself. It is not that difficult, but you lose warranty (there is a VOID sticker you need to puncture). Be careful that the MAO back cover is structurally different from the gray one: under the lower plastic "flap", there is another black plastic piece that needs to be removed before you can pull the phone from the back cover (first unscrew the two black cross-type screws, then pull out the plastic piece).
Good luck!

doartest said:
Hi,
I got a MAO back cover from here: http://www.parts4repair.com/htc-one-s-back-cover/
I asked by e-mail and they say it's an original HTC repair part. I received and replaced the cover and it is indeed indistinguishable from the original. I don't know how it will hold out over time, though.
Before ordering the back cover, I asked an authorized HTC repair service in Switzerland about the repair cost; they said 59 CHF for the cover + labor costs. Like in your case, they cannot estimate labor costs without seeing the phone.
I replaced the back cover myself. It is not that difficult, but you lose warranty (there is a VOID sticker you need to puncture). Be careful that the MAO back cover is structurally different from the gray one: under the lower plastic "flap", there is another black plastic piece that needs to be removed before you can pull the phone from the back cover (first unscrew the two black cross-type screws, then pull out the plastic piece).
Good luck!
Click to expand...
Click to collapse
Thanks, I knew the difference between the black and gray ones and since mine is black I just want to fix the fact that it's chipped. I'm comfortable with replacing it myself so I might just get it from the website you linked. I just have one question though, can you notice on the replacement cover you ordered whether it has the "new style" beveled USB port? I only want to bother replacing it if it has that USB bevel which indicates it won't have the chipping issue. Other than that, how long have you had it and have you noticed any chipping?
I'd probably fix it myself, it will save money and also won't have to be without a phone.

djsubtronic said:
Thanks, I knew the difference between the black and gray ones and since mine is black I just want to fix the fact that it's chipped. I'm comfortable with replacing it myself so I might just get it from the website you linked. I just have one question though, can you notice on the replacement cover you ordered whether it has the "new style" beveled USB port? I only want to bother replacing it if it has that USB bevel which indicates it won't have the chipping issue. Other than that, how long have you had it and have you noticed any chipping?
I'd probably fix it myself, it will save money and also won't have to be without a phone.
Click to expand...
Click to collapse
I only used it for ~1 week.
Unfortunately, I didn't know about the bevel and did not check. I don't have the phone anymore (it was the S3 version, I sold it and got an S4). If your eyes are better than mine, try looking at these photos:
https://www.dropbox.com/s/u1kq1gdfdrq3zhj/Untitled.jpg
https://www.dropbox.com/s/wmmrv0kgmrmglyr/full.png
I would say that it does not have the bevel, but the quality is not that good. I don't have the full resolution photos either.

doartest said:
I only used it for ~1 week.
Unfortunately, I didn't know about the bevel and did not check. I don't have the phone anymore (it was the S3 version, I sold it and got an S4). If your eyes are better than mine, try looking at these photos:
https://www.dropbox.com/s/u1kq1gdfdrq3zhj/Untitled.jpg
https://www.dropbox.com/s/wmmrv0kgmrmglyr/full.png
I would say that it does not have the bevel, but the quality is not that good. I don't have the full resolution photos either.
Click to expand...
Click to collapse
Ahhh yea those pics are crap. Thanks for your help anyway. I'll think it over and see what I should do.

Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.

djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
could you please post a link of the eBay page where you got the housing? am looking to replace mine also. thanks
Sent from my HTC One S using xda premium

djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
Nice work. Does the disassembly require pry tools (which I suck at) or is it all just screws?

djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
Thanks for sharing your experience with everyone. I wonder how you even started removing the case, since it has no visible screws. I suppose there are videos out there with instructions.

evilRafael said:
Thanks for sharing your experience with everyone. I wonder how you even started removing the case, since it has no visible screws. I suppose there are videos out there with instructions.
Click to expand...
Click to collapse
Pop your plastic covers for starters.

dr_rick13 said:
could you please post a link of the eBay page where you got the housing? am looking to replace mine also. thanks
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Here's the ebay link:
http://www.ebay.co.uk/itm/Metal-Fra...t=LH_DefaultDomain_0&var=&hash=item2a1ece2c79
Make sure you select the right option from the dropdown. The Europe based S4 black model is "A".
el_smurfo said:
Nice work. Does the disassembly require pry tools (which I suck at) or is it all just screws?
Click to expand...
Click to collapse
For just the case you can get by without pry tools. You need a T5 torx and a small phillips screwdriver. Once you have the 4 screws removed, apply some pressure on the inner phone assembly that is exposed at the bottom, you basicaly want to push it outwards towards the face of the phone. Obviously be careful with the pushing. It should easily give way as I found it isn't really glued into the housing. You might need a credit card or something to help you ease it out once you have made room with the pushing. I hate pry tools too and had no problem doing it this way. The one thing to be careful about is the plastic assembly at the bottom. Take a good look at how it fits in, so you don't mess it up when putting it back together.

By the way, you can buy HTC void stickers too:
http://www.ebay.co.uk/itm/8-VOID-WA...K_Replacement_Parts_Tools&hash=item337c0261f7
If I ever do need to send it back to HTC under warranty I'm sure those would do the trick

djsubtronic said:
Here's the ebay link:
http://www.ebay.co.uk/itm/Metal-Fra...t=LH_DefaultDomain_0&var=&hash=item2a1ece2c79
Make sure you select the right option from the dropdown. The Europe based S4 black model is "A".
For just the case you can get by without pry tools. You need a T5 torx and a small phillips screwdriver. Once you have the 4 screws removed, apply some pressure on the inner phone assembly that is exposed at the bottom, you basicaly want to push it outwards towards the face of the phone. Obviously be careful with the pushing. It should easily give way as I found it isn't really glued into the housing. You might need a credit card or something to help you ease it out once you have made room with the pushing. I hate pry tools too and had no problem doing it this way. The one thing to be careful about is the plastic assembly at the bottom. Take a good look at how it fits in, so you don't mess it up when putting it back together.
Click to expand...
Click to collapse
how does the lower cover pop off...straight out, like the top?

el_smurfo said:
how does the lower cover pop off...straight out, like the top?
Click to expand...
Click to collapse
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium

ickedmel said:
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
It almost always is for regulatory reasons (less radiation in the dummy head) even though it makes for less signal when "you're holding it wrong". There's an anandtech review showing the antenna placement as well.

el_smurfo said:
how does the lower cover pop off...straight out, like the top?
Click to expand...
Click to collapse
ickedmel said:
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Well for me I slowly pried the gap at the bottom edge. It's got adhesive on the inside sticking it onto that plastic assembly I mentioned earlier, but just keep prying it slowly so the adhesive doesn't get all messed up. It should flip open like a door with the hinges being where the beats logo is, eventually it'll open right out then just pop it out.

Hi guys,
I got similar story and want to replace my housing.
I have the EU S4 black/red model. I think its one of those with the chipping issue, but not much damage, until the drop which cut the top corner to straight 45 degree white line and scratches my finger every time I use it in landscape mode.
Anyway wanted to ask, since you already tried/used it for some time.
Is the eBay one genuine or just a good fake?
Or is the one from parts4repair a better choice?
Also after removing the bottom plastic cover, as I understand it has glue to it to keep it in place. Do I need to replace that on the reassembly or just heating it back and pressing will work with the old one? Or it has something else to keep it in place other than the glue?

Replacement Screens

Hello,
I dropped my Nexus 4 and caused damage to the screen. There is a crack in the glass on the bottom half which causes touch not to work, but the top half is fully functional. Do I need to purchase a new screen and digitizer or just the screen?
I'm from Canada, so where is the best place to buy parts online?
Thanks

Zoider said:
Hello,
I dropped my Nexus 4 and caused damage to the screen. There is a crack in the glass on the bottom half which causes touch not to work, but the top half is fully functional. Do I need to purchase a new screen and digitizer or just the screen?
I'm from Canada, so where is the best place to buy parts online?
Thanks
Click to expand...
Click to collapse
I´d try ebay. I´m sure one of those hongkong based merchants offers spare displays.
good luck!
Edit:
I think it´s a bit expensive, but its from canada so you might find it interesting:
http://www.ebay.com/itm/LG-Google-N...e_Replacement_Parts_Tools&hash=item3f280b2311

supermult said:
I´d try ebay. I´m sure one of those hongkong based merchants offers spare displays.
good luck!
Edit:
I think it´s a bit expensive, but its from canada so you might find it interesting:
http://www.ebay.com/itm/LG-Google-N...e_Replacement_Parts_Tools&hash=item3f280b2311
Click to expand...
Click to collapse
But, do I need the digitizer or just the glass? If the top half still functions, does that means I only need glass?
Thanks.

Zoider said:
But, do I need the digitizer or just the glass? If the top half still functions, does that means I only need glass?
Thanks.
Click to expand...
Click to collapse
As I know since the touch doesn't work on bottom then you need digitizer.
Sent from my Nexus 4 using xda app-developers app

The Top Glass is the Digitizer. You will need the LCD+Digitizer set. DO NOT order just the Digitizer glass. It is for Expert Techs ONLY. The Glass and LCD are fused together and requires very careful disassembly. I highly recommend getting the 3 piece Digitizer+LCD+Frame set as that is a quick swap of the Parts that takes about 15Min total. The Glass is glued with an RTV Silicon Adhesive type on the frame (They use the RTV adhesive on the Back cover glass too) and is annoying to remove as Heat doesn't work as well as the normal adhesive most companies use. Plus there is a chance you could scratch up the frame trying to remove the glass shards (and there WILL be shards.) I have done this replacement before on both the Front and Back Glass and it wasn't fun. Just save yourself the frustration and get the 3 piece set. You'll thank me for it.

I too have a cracked screen,touch does not work but the display is working I am from India plz help me what should I do

mahesh48 said:
I too have a cracked screen,touch does not work but the display is working I am from India plz help me what should I do
Click to expand...
Click to collapse
I too dropped my phone and had to replace the whole front set...Just go to a nearby LG service center..it costs around 5500Rs they ll fix it in 15mins.

Which phone u had repaired?
Sent from my Wildfire S A510e using Tapatalk 2

mahesh48 said:
Which phone u had repaired?
Sent from my Wildfire S A510e using Tapatalk 2
Click to expand...
Click to collapse
Nexus 4 of course.

Again I highly reccomend getting the 3 piece with the Frame+LCD+Glass a 1 unit. You can sell the broken one on Ebay and get a few $ back that way. The swap out from that point is VERY easy and Quick. Youtube it or go to http://www.ifixit.com/Teardown/Nexus+4+Teardown/11781/1
All you are doing is a swap of the MB, USB Port, Cameras, Battery and the Switches. It is really easy and quick and requires very little skill. If you DO NOT get the 3 piece set and just the Glass+LCD then it's more difficult.
AGAIN! ANYONE who needs to replace the glass just get the 3 piece set. Follow the Dissassembly Guide (only need 2 tools a PLASTIC Pry tool and a #00 Phillips Screwdriver) I posted above. I know this is just me repeating my previous post above but I just wanted to stress this as there are sales out that sell JUST the Glass and getting just the glass will be a waste of money. There is also the Glass + LCD set but again 99.999999999% of people have neither the skill and/or the tools to separate the Broken glass from the Frame let alone the LCD itself. The glass has a Silicon Adhesive which resists heat (if you've worked on cars you know how fun RTV is, imagine it on Delicate electronics) and makes it hard to remove.

Cheapest I found is 90$ us
Sent from my Nexus 4 using Tapatalk 2

Superpopsss said:
Cheapest I found is 90$ us
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
If that's for the 3 Piece set, that's a great price really. That used to be the On Sale Price for the 2 Piece set. So looks like prices are finally starting to come down.

Ohgami_Ichiro said:
If that's for the 3 Piece set, that's a great price really. That used to be the On Sale Price for the 2 Piece set. So looks like prices are finally starting to come down.
Click to expand...
Click to collapse
Here's where I buy my LCD screen and other n4 parts
http://www.spareslg.com/lcd-e-touch-lg-nexus-4-lg-e960-acq86270901.html
73€ for a LCD its the cheapest one.
Ordered many to Canada fast shipping (1week) and shipping was 5$-10$ can't remember.
Sent from my Nexus 4 using Tapatalk 2

Superpopsss said:
Here's where I buy my LCD screen and other n4 parts
http://www.spareslg.com/lcd-e-touch-lg-nexus-4-lg-e960-acq86270901.html
73€ for a LCD its the cheapest one.
Ordered many to Canada fast shipping (1week) and shipping was 5$-10$ can't remember.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
That's the 3 Piece set. Good price on that.

Ohgami_Ichiro said:
That's the 3 Piece set. Good price on that.
Click to expand...
Click to collapse
Hello!
First, sorry to open such an old thread, but I just try to follow XDA rules. And this one match most for what I'm looking for.
On my wifes Nexus 4, after she dropped it, touch screen stop to responce at about 1 cm wide stripe from bottom to top. Everything else is ok, glass is not broken. I'm asking if there is also necessary to find 3 piece set or I could manage to fix it with this: http://www.ebay.com/itm/LCD-Display...317?pt=LH_DefaultDomain_0&hash=item1e9850f8ed
Regards, Zagor

zagorteney said:
Hello!
First, sorry to open such an old thread, but I just try to follow XDA rules. And this one match most for what I'm looking for.
On my wifes Nexus 4, after she dropped it, touch screen stop to responce at about 1 cm wide stripe from bottom to top. Everything else is ok, glass is not broken. I'm asking if there is also necessary to find 3 piece set or I could manage to fix it with this: http://www.ebay.com/itm/LCD-Display...317?pt=LH_DefaultDomain_0&hash=item1e9850f8ed
Regards, Zagor
Click to expand...
Click to collapse
That part doesn't include the bezel. When you disassemble the phone, the entire front assembly includes the bezel and screen assembly. With that part, you would have to remove the screen assembly from the original bezel, then adhere the new one in. It's doabable, but a bit of a PITA, especially if you don't have a heat gun to soften the original glue. For about $60 you can get the entire front, including the bezel (brand new, without dings in the chrome) and save yourself a huge hassle.

Planterz said:
That part doesn't include the bezel. When you disassemble the phone, the entire front assembly includes the bezel and screen assembly. With that part, you would have to remove the screen assembly from the original bezel, then adhere the new one in. It's doabable, but a bit of a PITA, especially if you don't have a heat gun to soften the original glue. For about $60 you can get the entire front, including the bezel (brand new, without dings in the chrome) and save yourself a huge hassle.
Click to expand...
Click to collapse
Thank you on your answer. I've looking for 3 piece replacement, but I didn't find any cheaper then for around 90 EUR. Maybe I don't know what to search, because I don't know what the bezel is.
Regards, Zagor