sync help - Touch Pro, Fuze General

i have been all over the microsoft forums to no avail. i recently updated my laptop to win7, and have a fuze running 6.1 mobile. when i connect my fuze to the laptop the laptop recognizes it as it begins to charge, but then nothing. i try to open win mobile device center and this is the error message i get C:\windows\system32\rapistub.dll is either not designed to run on windows or it contains errors. I have uninstalled and reinstalled 3 times and also tried different usb ports on my laptop. If anyone can help that would be awesome
i have also searched this forum but didnt find anything that fixed my problem

Related

Windows crashes nearly everytime

Hi all
i have a problem.
its not related to only one pc but all windows xp machines ive used ( im not going down vista route at all).
nearly everytime i connect my phone/ppc to windows, it crashes, ie, i get the windows 32 process host or something has an error then the RAPC window with 1 minute countdown comes on and my computer crashes or restarts.
then if i connect my ppc, its fine.
its not only with 1 pocket pc, its with the 2-3 ive tried.
they all run windows mobile 6 or 6.1...
anybody have the same problem and know what to do? activesync 4.5, u can see the icon connecting and it has made the noise its found the pocket pc, then bam...
i couldnt find this topic anywhere in xda, dont know where else to look
Cheers
It is not the PPC's at all - rather incompatible hardware on your desktop, such as an installed dial-up modem or other network device.
I had similar difficulties back in time on a Dell desktop until I removed a special DS Sound Card. A friend of mine had similar problems until he removed - following my recommendation - his dial-up modem card.
You will have to figure out what device on your desktop causes this incompatibility - please: before plugging out anything, remove the installed drivers first!
oh man. they are both laptops. thats going to be tough to remove something/uninstall drivers - doable but its going to annoy me everytime i log in
Hmmm,
try running your pc in save mode and run only what is needed for ActiveSync to work - not a nice solution but at least you can determine if this is an incompatibility issue or not.

Vista: WMDC Synchronization error

Hi Guys,
Any help would be appreciated please. I am currently running Windows Vista. My mobile device is a samsung omnia. I have been synchronizing my phone successfully for the past few months. However, last week, when i tried to connect with the cable (as always), I get the error "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer"
4.5 as i know, is an XP programme so im stuck... I have tried disabling my firewall and this does not seem to help either. I have searched the net and have still not been able to find a solution.
I would appreciate any suggestions!
Thanks
Any ideas please
WMDC
I had the same problem with Windows7. I had to end the partnership with my phone(Sprint Touch Pro), disconnected the usb cable and rebooted the pc. After windows fully loaded I hooked the phone back to the usb and wmdc found my phone, loaded the drivers etc.,and hasn't had a problem since. Hope it works for ya.
I tried this to no avail.
I also uninstalled all drivers in Device manager. I then rebooted and plugged my phone in with "advance..." blocked checked. and my WMDC started up and found my phone. However, for some reason, I can no longer connect to my 3g card when i have this option checked. Then i uncheck the option and plug the phone back in and I get the same error message, and WMDC wont even detect my device.
Ive trolled the web and cannot find any solutions..
Any assistance please!!!

WMDC doesn't create a new partnership on Windows 7 [SOLVED]

Hello,
After I created a new install of Windows 7, I'm not able to sync my Touch Pro.
If I boot on my previous Windows 7 installation (I kept it on the same computer), sync is OK.
I uninstalled (and reinstalled) many times WMDC, "PocketPC USB sync" and "Windows Mobile Remote Adapter" drivers.
There is some trouble : obviously WMDC doesn't recognize my device.
Both "USB to PC" modes are not able to start WMDC.
Any help?
If you have the Pro version, you should be able to run a virtualized instance of XP, and therefore set it up under as ActiveSync in XP. That is with the official release from what we trained on, 22nd is that date... This allows ANY program to run that was supported by XP 100%
I'm using Windows 7 on my laptop and PC, sync with TP no problem at all. I've done installation on few computers too and they are all good. Things that you might check:
- Check your USB Sync cables and/or your USB port, just to make sure
- Open Windows Mobile Device Center and delete all partnership, then reconnect back
- If possible, try to change your TP ID, so that Windows recognize different device.
Hope it helps.
To supratt93 :
Good idea I'm going to try this
To u2pop :
- I've 2 Win7 installed with a boot selector. Sync works with the forst one and not with the other one, so the cables and USB ports are OK.
- I have never been able to create a partnership. Win7 installed the drivers and WMDC never started. Something goes wrong with the installation of the drivers
- Sometimes I receive a message telling me about a problem with installed drivers (nothing about which device is concerned)
I solved my problem today:
After a reinstallation of the last chipset drivers of my Asus P5k motherboard and a reboot, WMDC started and allowed me to sync my Touch Pro.
I hope that will help someone!
I know that this is solved, however I had the same problem.
I reinstalled WMDC, etc.
In the end a simple swap of the usb port that the USB cable was plugged into and it solved the problem.

Microsoft Windows Mobile Remote Adapter Driver ERROR

Hi All,
I'm running Windows 7
1. Suddenly my Windows Mobile Device Center Failed to recognize my phone and connect to sync. After some troubleshooting I realized the "Microsoft Windows Mobile Remote Adapter Driver" Failed to work correctly Saying "This device cannot Start (Code 10).
I uninstalled the driver in the Device Manager and attempted to Search for the Driver again after a Restart, my phone was again found while attempting to Sync but once again during Driver installation it failed and gave the Exclamation Mark stating an issue and sure enough it is the Code 10 error again.
2. This exact same issue happens when attempting to Tether to use the Phone as an Internet Modem. The Network Adapter driver to Tether is "Remote NDIS based Internet Sharing Device" and it also doesn't install fine anymore. So no Tethering for me via USB.
Now, all the above happened suddenly while using the Internet Tethering with no issues. It simply disconnected and then that was the end of that.
Let me tell you to what Extent I went to try to get this to work. I re-formated my hard drive and re-installed Windows 7. And NOPE it didn't work. Windows Mobile Device Center is properly installed and that is when all the drivers are provided, during the WMDC installation. Once WMDC was installed, my phone was found, the Activsync feature and the Internet Modem feature, and the driver installation attempt happened, The correct drivers were found, but they just weren't Installed successfully as explained above. I'm currently browsing the internet using the Bluetooth PAN Internet Sharing, which works wonderfully with no issues.
But I really need to get the above two items working again, otherwise I can no longer connect my phone via activesync or better said WMDC for Windows 7 to Flash a New ROM.
Now so that nobody thinks it's a problem with my phone, I have three other computers where I can connect via WMDC and Tether via USB with no issues. But I'm having trouble with my Dell Inspiron 9300 which gave me no issues for Months until now.
I considered myself very computer savvy but at this point I'm really stuck!
Any help?
Thanks in advance,
Raudel
try to download activesync for w7 from microsoft
i had a prb, dunno if similar, but that helped me
Moved as not ROM Development.
avatar_ro said:
try to download activesync for w7 from microsoft
i had a prb, dunno if similar, but that helped me
Click to expand...
Click to collapse
The Windows Mobile Device Center that gets Installed is the one with Windows Update. So it must be the correct one with the Win 7 Drivers.
Thank you for your reply.
Any other ideas would be really appreciated.
Thanks in advance,
Raudel
i have the same problem with win7 and HTC touch2
i cannot solve the problem with HTC touch GSM everything is OK
any Help !!!!
I'm also getting this problem. It just began after a hardware upgrade. Microsoft remote adaptor cannot start. I have tried re-installing device centre numerous times and i cannot get device center to recognise my phone.
It works fine in disk drive mode however.
Edited to add that my device is recognised fine on other machines. So it is an issue with my PC. Interestingly my wireless usb adaptor won't work either.
I had a similar problem, found a solution online. There were some issues with Intel P55 chipset, it sync up immediately after BIOS update and reboot.
Hope this makes your day, best of luck.

Diamond 2 will not synch with windows 7 64 bit

Hi
My diamond 2 completely refuses to be recognised by windows 7 64 bit despite the fact that the first time it was connected it WORKED fine. Here are some notes about what ive tried:
I have tried reinstalling WMDC
Changed the settings in USB to PC on the phone (disable advanced USB connections)
I have tried different cables (the device charges but will not connect).
The device connects with NO problems to my windows XP machine at work!
When i install drvupdate-amd64.exe it looks for an 'unknown device' but cannot find it and says the device is unplugged.
Ive tried turning the phone off and on whilst plugged into the USB
**edit** i have also tried different USB ports on the PC!
Can someone help as i want to update to hard spl but i need the sync connection and i have tried everything i can find in various forums!
Thanks in advance!
I have the same problem, did you or any one else have the solution to these problem? Thanks in advance.
if you have asus p7p55d motherboard you should know that there is a fault of the BIOS. When I enable the option "Intel C-State Tech", the driver for my mobile phone can be installed. So actually it is a problem with USB on that board, if the option is disabled. I hope this problem will be solved with a BIOS update soon. Until then I can live with that option enabled.
Well, after a lot time waste, I have a W7 64 bits but Office 2010 32 bits and everything works like a charm. I can sync without any problem with my HD2 (Leo).
to those who have the same problem, just check it and let us know.
You should install ActiveSync at first,if your diamond2 still can't synch with you PC.you can updated your device drivers in device management.

Categories

Resources