Related
I literally had the worst combination of events take place the other day:
So, I was running Firefly 3.0, and I planned on replacing it with a gingerbread ROM, (since my apps weren't saving data, for some reason), and I started to notice that my unlock button was starting to hang a bit. I thought this was just another side effect from Firefly 3.0 acting weird.
So, I boot to download, and flash the CM7 kernel with CWM 3.0 on it, and it passes.
The next step is to navigate around in CWM to install the ROM file before you can boot up. But, the power/lock button still doesn't work! So I'm stuck in CWM 3.0, unable to boot correctly. The touch buttons don't work like they do in CWM 2.x, so I'm... stuck.
So, I call Samsung, and I'm having a replacement sent to me within the week, since I can't even power on/off my phone (if it wasn't for CM7's auto-boot when you put the battery in)
So, already having adb installed on my Linux boot, I jump over there to send the adb reboot download command. All this does is reboot the phone "normally"!
What are my options here? I've already copied everything off my phone with adb, and I'm not afraid to use terminal commands to flash something usable just to get it back to stock before I send it back.
*cough*JIG * COUGH*
Sent from my SAMSUNG-SGH-I897 using XDA App
Would that work with CWM 3.0/CM7 Kernel? I've always had weird issues with plugging things in and it just booting up, even when my power button worked.
The jig should work...the only thing that would cause the cm7 kernel to boot when plugged in is if it was off and you were only trying to charge it. The jig just redirects some power into pin 4 telling the bootloader to initiate download protocol...kinda the same way your phone knows when its hooked to a mountable usb port and when its charging out of the wall or something.
similar issue
I recently attempted a flash of fantasy II (2.3.5) captivate, and i got the bootload, and kernel installed and then installed the stock 2.3.5 rom to flash fantasy II over. . . . well after getting the stock rom, i found it had what i wanted, so i was going to stick with that.
i noticed about ten minutes after getting that rom, that my lock button was not working, and the phone would auto boot, i would pull the battery and put it back in and BOOM at&t boot screen right away, not one button pushed, I have bricked and unbricked my phone since then, and i am now simply running 2.1 stock, however; the dang lock button still does not respond at all, and it will auto boot still, is this the kernel or the bootloader? I know its not the rom now . . . . Please help this is awful!
and if you have a solution that i can download please post it!
So basically I have a volume button problem, the volume down button sometimes doesnt work/or just continuously goes in a loop and the volume up doesnt work at all. So i decided to flash original rom, and turn s-on back again to claim my warranty. This is where the trouble began.
Since i cant get into fastboot by holding the volume down button and power button, i used adb commands to get into fastboot. I first loaded S-Wipe from the sd card), i went back into recovery and tried to load the original rom. BOOM I had forgotten to put the original rom on the sd card. So i stupidly took out the battery to turn it off and put the rom on the sd card. I turn the phone on (just shows the htc logo forever since i had done a s-wipe) using adb commands again i go into fastboot. BOOM for some reason the power button does not work when in fast boot (even thou it worked just before)
So basically i need help in trying to flash the rom somehow. Maybe through adb commands or something ( dont really know much about adb commands). Please if anyone would help me out, i would hate to throw away a $500 phone only 3 months old.
I had the same problem as you and was tied for the firmware that I used which was not for my phone. Depending on the version of the ROM you want to use and origin of the phone, select the proper firmware http://forum.xda-developers.com/showthread.php?t=1459767 . Install it, then do the supervipe, then install the rom you want, I installed a "http://forum.xda-developers.com/showthread.php?t=1466917" and is a great rom. sorry for bad english I hope I helped you. first boot can take up to 15 min wait so do not touch the phone.
I'm a noob and I wiped my phone before trying recovery! DERP. Not sure what to do next.
So... I need a little help. I've been looking around and havent been able to find a situation like mine. I've got a completely wiped/factory reset HTC Inspire 4g. SD card is good and reformatted to fat32. Heres the basics. When I press the power button I get 3 vibrate and orange light, when I press volume down and power I get 5 vibrates and green light. When I plug phone in with usb (to computer or charger) I get clockworkmod recovery v5.0.2.7. I am able to toggle through options, all works fine.
This is where I need help and I get easily confused. What do I do to get this phone back to stock settings? I've tried putting the stock pd98img.zip file onto the sd card, then installing via clockwork recovery. When I do this, I get failed installation EVERY time. I've also tried connecting through ace hack kit on my lap top and running the stock settings flash. Whenever it resets the phone it does the 3 vibrates/orange light and stops.
I would really appreciate someone with a little more experience to walk me through what I need to do to recover.
Update: When I try to download the zip from the sd card via clockworkmod I get the error E:Signature Verification Failed. I'm not sure what this means.
If someone can solve my problem I'll buy them lunch or coffee! Some kind of gift card to your favorite place? I'd really like my android back!
Drdandy said:
I'm a noob and I wiped my phone before trying recovery! DERP. Not sure what to do next.
So... I need a little help. I've been looking around and havent been able to find a situation like mine. I've got a completely wiped/factory reset HTC Inspire 4g. SD card is good and reformatted to fat32. Heres the basics. When I press the power button I get 3 vibrate and orange light, when I press volume down and power I get 5 vibrates and green light. When I plug phone in with usb (to computer or charger) I get clockworkmod recovery v5.0.2.7. I am able to toggle through options, all works fine.
This is where I need help and I get easily confused. What do I do to get this phone back to stock settings? I've tried putting the stock pd98img.zip file onto the sd card, then installing via clockwork recovery. When I do this, I get failed installation EVERY time. I've also tried connecting through ace hack kit on my lap top and running the stock settings flash. Whenever it resets the phone it does the 3 vibrates/orange light and stops.
I would really appreciate someone with a little more experience to walk me through what I need to do to recover.
Update: When I try to download the zip from the sd card via clockworkmod I get the error E:Signature Verification Failed. I'm not sure what this means.
If someone can solve my problem I'll buy them lunch or coffee! Some kind of gift card to your favorite place? I'd really like my android back!
Click to expand...
Click to collapse
You only flash pd98 files from fast boot not from CWM recovery. Boot in bootloader and it will find it
I am going to come off as the biggest noob here, but its got to be done. How do you boot in bootloader?
EDIT: Alright. So Bootloader is Volume down and power. My phone won't boot into bootloader. Phone vibrate 5 times and green led comes on. Screen stays black the whole time.
Drdandy said:
I am going to come off as the biggest noob here, but its got to be done. How do you boot in bootloader?
EDIT: Alright. So Bootloader is Volume down and power. My phone won't boot into bootloader. Phone vibrate 5 times and green led comes on. Screen stays black the whole time.
Click to expand...
Click to collapse
Ok i dont use CWM but there maybe an option in there to reboot into bootloader. Try holding volume up and power. Could be confusing devices on that though
zelendel said:
Ok i dont use CWM but there maybe an option in there to reboot into bootloader. Try holding volume up and power. Could be confusing devices on that though
Click to expand...
Click to collapse
Nah, no other combo's work for getting into bootloader or rebooting it. From what I've read on other forums, if I can't get into bootloader, I'm bricked. Do you think since the phone is wiped back to factory settings that HTC would replace it under the warranty?
Since you can boot into recovery, adb should still work. Enter recovery then plug in your phone to PC and run adb reboot bootloader
Have you tried reflashing a rom in recovery aswell?
Drdandy said:
Nah, no other combo's work for getting into bootloader or rebooting it. From what I've read on other forums, if I can't get into bootloader, I'm bricked. Do you think since the phone is wiped back to factory settings that HTC would replace it under the warranty?
Click to expand...
Click to collapse
If you are booting into CWM your not back to factory. As stated above you can use adb to boot into bootloader
Just making sure I'm doing this right as its the first time I've ever use adb commands to me phone. Do I need to downloand Android SDK to write commands to the phone?
Okay. I've learned how to use the adb commands. That was cool. haha. So I popped the battery out, then back in to get to CWM. With phone connected to computer I tried adb reboot bootloader. My phone rebooted itself, but it did the 3 vibrates with a flashing orange LED. Adb reboot recovery does the same thing.
For being in recovery. Are you guys talking about the volume down power combination, when I do this and connect the phone to the pc, the pc doesn't detect the phone. So there is no abd commands/flashing roms to it in recovery.
Drdandy said:
Okay. I've learned how to use the adb commands. That was cool. haha. So I popped the battery out, then back in to get to CWM. With phone connected to computer I tried adb reboot bootloader. My phone rebooted itself, but it did the 3 vibrates with a flashing orange LED. Adb reboot recovery does the same thing.
For being in recovery. Are you guys talking about the volume down power combination, when I do this and connect the phone to the pc, the pc doesn't detect the phone. So there is no abd commands/flashing roms to it in recovery.
Click to expand...
Click to collapse
OK looks like your bootloader is messed up. Go to the ace hack kit thread. There you will find a link foe the IRC chat room. Go there and tell them what you did. They maybe able to help you.
Been trying to Root this phone for a couple of days. Finally manged to do it!
Its the Rogers Samsung Galaxy Rugby. The (GT-S5690R) model.
I had to add the (R) in the updater script. Thats how I got it too root.
1. Put the file on your sd-card Universal_GB_ROOT_v5_patched_for_S5690.zip
2. Turn phone off
3. Boot in to Recovery ( press Power, Vol-up, and center button on bottom of phone all at same time. The samsung logo will appear, keep holding all buttons, then the logo will dissapear then re-appear, when it comes back let go of the power button only. The phone should boot into the 3e recovery)
4. use vol keys to navigate through menu, and use center button on the bottom of the phone to select.
5. Select install update from sd card.
6. press on the Universal_GB_ROOT_v5_patched_for_S5690.zip
7. phone should install root, wait till the 'Success' appears, then reboot.
You should find Superuser app when your phone reboots. You are Rooted!!
Now im just trying to figure out how to get a custom recovery!!
Perfect!
This zip file worked perfectly on my Rogers Galaxy Rugby. Many thanks!
Happy to hear
Sent from my GT-S5690R using xda premium
Big problem now though....
So the root went swimmingly, but I got a little too excited removing pre-installed apps. I backed up and removed Samsung Home, and removed and NOT backed up SNS 1.0. The phone will now refuse to boot unless I wipe data/factory reset in recovery mode, but after that it just ends up crashing during the Android wizard start up....
This is a brand new phone, what can I do to restore those apps, and get it back to the way I received it earlier today?!
There is a way to boot into safe mode, head Google mod2extreme and I find the forum for our phones (currently the only one) find advise there
Sent from my GT-S5690R using xda premium
Thanks for the name of that forum! I've found the guide someone posted here: http://www.mod2xtreme.com/showthread.php?t=12386 and I've decided to try it.
I'm using the first firmware listed in this thread: http://www.mod2xtreme.com/showthread.php?t=11744 (S5690XXKL1 2.3.6 2011 December S5690OXFKL1) mostly because under Country/Carrier it has nothing, so I'm assuming it's more generic than the others. I'm also keeping in mind this is for the 5690, not the 5690R, so it may not work at all. But, worth a shot since my only other recourse is to break down and cry in front of a Rogers attendant to see if he can give me a new one. "Root? What's root? Like ginger?"
I'm using v.1.83 of Odin3, which is listed as supported the 5690.
Downloaded KIES 2.0 from http://www.samsung.com/my/support/usefulsoftware/KIES/JSP - It gave me two DLL registration (COM) errors during installation on Windows. Uncertain if this will end up screwing me over or not.
Be right back, rebooting now that KIES is installed... will edit this post when there's more to report.
EDIT: Yeah, so I ended up trying both Odin version 1.83 and 1.85, with the Marvell .pit file, and the firmware from that thread. I learned that I had to put the phone into Download Mode, NOT Recovery Mode while trying Odin. Even still, nothing worked. I've given the phone up to Rogers and they will try to replace the original ROM, hopefully they won't notice that I've rooted it and really mucked everything up. They said if it doesn't work they'll send it off to Samsung to get it repaired. Anyone know if they find out I rooted it, I'd have to pay for voiding a warranty or anything?
i have the same device hae you manage to get clockworkmod recovery on it?
Does this method erase all personal data/downloaded apps from phone?
Great it worked perfectly...
did you success in installing different firmware?
Thanks again
Thanks a lot, worked like a charm.
Is there a way I can install Clockwork Mod? Rom manager doesn't recognise the s5690r. It gives me the option of selecting the Epic4G or the GalaxyS i9000. will either of these work?
Also, once I get that figured out, is there any roms compatible with the s5690r? I've scoured the webs with no luck. Not a very popular phone, eh?
Thanks again.
markdexter said:
Been trying to Root this phone for a couple of days. Finally manged to do it!
Its the Rogers Samsung Galaxy Rugby. The (GT-S5690R) model.
I had to add the (R) in the updater script. Thats how I got it too root.
1. Put the file on your sd-card Universal_GB_ROOT_v5_patched_for_S5690.zip
2. Turn phone off
3. Boot in to Recovery ( press Power, Vol-up, and center button on bottom of phone all at same time. The samsung logo will appear, keep holding all buttons, then the logo will dissapear then re-appear, when it comes back let go of the power button only. The phone should boot into the 3e recovery)
4. use vol keys to navigate through menu, and use center button on the bottom of the phone to select.
5. Select install update from sd card.
6. press on the Universal_GB_ROOT_v5_patched_for_S5690.zip
7. phone should install root, wait till the 'Success' appears, then reboot.
You should find Superuser app when your phone reboots. You are Rooted!!
Now im just trying to figure out how to get a custom recovery!!
Click to expand...
Click to collapse
Good Day, I am also working on the Bell Canada Version of the Rugby. It is the GT-s5690m model. I am now stuck in a bootloop and don't know how to fix it. I have played around with the root and unroot zip files that have been floating around but I am certain that the bootloop is due to not being able to clear the Delvik Cache. As you are aware Clockworkmod recovery is not supported on our devices. I am unsure how to get it to work. Until then I just keep trying different things to hopefully get this phone up and working. It is quite a rugged device and would be great with a custom rom and recovery. Could you explain to me in layman's terms how I might create a flashable clockwork image to flash via Odin or even through stock recovery. I would love to get this phone up and working. Thanks in advance
Sasktel Rugby
Hi there. I am working on the Sasktel version of this phone as well. I tried to change the model from R to M because this phone is the same as the bell model version but it would not install it. I found it on the external SD card but it will not run the zip file from the 3e recovery. Any ideas why this might be happening?
Thanks,
First off, I know I'm a new member, and I did watch the video, I've been searching the forum for days now trying to find someone with the exact some problem as me but I've come to the conclusion I must be special as I haven't seen this problem else where. Lucky me...
Let me start off with some information about the phone.
Carrier: Vodafone AU (says XSE on the recovery screen)
Baseband Version: I9020XXKI1
Bootloader Version: I9020XXKL1
HW Version: Rev 52
Model: Nexus S i9023
Lock State: Unlocked
Primary computer: iMac
Fairly certain I have USB debugging turned off :\
I rooted and unlocked the phone and was running the latest CyberGR mod ROM and the latest AirKernel kernel. The phone was running brilliantly, not a problem in the world, very smooth, very fast, excellent battery life, I loved it. Only thing I didn't like was how the keyboard became unresponsive at times. For that reason, I think I'll be switching to the Bugless Beast ROM and thalmus kernel when (if) I get this phone fixed.
So a few days ago, the power button on my Nexus S stuffed up and wouldn't work anymore. Completely unresponsive. I couldn't lock/unlock my phone using the power button. I had to either connect/disconnect it from the USB or turn it on/off by taking the battery out to be able to use it. Needless to say, this got very tedious very quickly and I decided to unroot it and send it back to Samsung.
I looked into how to unroot and came across the Odin app and decided that I'd use that to unroot. (noob error on my behalf, I realise now) Regardless of what I'd read, Odin doesn't work on a Nexus S apparently and although I didn't flash to stock, my phone became significantly less useable, half the time it wouldn't respond to anything I did on it. I tried to boot into CWM and although I was able to do so, it was useless as my power button wasn't working.
At this stage, I took out the battery, put it back in and the phone booted up again. I didn't press the power button, it just booted up straight away. I took it out again and held the volume up button on the side and this time, I didn't get put into the CWM menu, but the normal Android recovery menu. I went to press the volume up and down buttons but nothing worked. Power button is still unresponsive.
When I don't boot into recovery, it goes past the Google screen with the unlocked lock on the bottom of it, and goes to a screen where it says "Android" in a metallic style (I disable the boot animation logo in CyberGR mod so I was used to this screen) and it just hung on there, it never booted up past that screen.
Every time I tried to use fastboot -w to wipe the phone, or oem lock or anything, I would just get < waiting for device >
I plugged it into my Windows 7 laptop, tried the one_click_stock app and got the message that my phone has no boot.img. I then googled problems regarding the boot.img and no one really had any solutions that helped me out.
The SDK won't recognise my phone is there, but the sound pops up on Windows saying a device has been connected and disconnected but it never shows up.
Is it bricked or unfixable? Clearly warranty is void, not sure if I should just take it into Vodafone and ask for a new phone (as its still within warranty period, hence why I wanted to lock it and flash a stock ROM).
Very sorry for the lengthy post, I know I was meant to be brief but I thought the more information I could give, the better chance there would be for anyone to help me out. Thanks.
Make the root of your phone with any application in the market and install the recovery ClockworkMod touch with Rom manager premium or Rom toolbox Pro. Restart recovery using Rom manager or Rom toolbox and do a full cleaning on the phone. Wipe only data and cache.
Now, select from mount and storage mount USB storage and copy over to your i9020 storage any rom ( try using the cm9 ). If the installation is successful restart, if not try some other roms. More than that I do not know how to help.
P.s.: In theory it should go smoothly, otherwise I do not assume any liability for further damage to the phone ... Good luck!
Did you know you can operate cwm using the capacitive search button instead of the power button?
Alfaneo said:
Make the root of your phone with any application in the market and install the recovery ClockworkMod touch with Rom manager premium or Rom toolbox Pro. Restart recovery using Rom manager or Rom toolbox and do a full cleaning on the phone. Wipe only data and cache.
Now, select from mount and storage mount USB storage and copy over to your i9020 storage any rom ( try using the cm9 ). If the installation is successful restart, if not try some other roms. More than that I do not know how to help.
P.s.: In theory it should go smoothly, otherwise I do not assume any liability for further damage to the phone ... Good luck!
Click to expand...
Click to collapse
Thanks for the reply, I can't actually boot into the phone or get to any market place or any screen that could make the phone useable at all, it just sits on the CyberGR android screen for when you disable the boot animation.
bedalus said:
Did you know you can operate cwm using the capacitive search button instead of the power button?
Click to expand...
Click to collapse
I was pressing the search button (the volume buttons were working when I could boot into CWM) and the text just disappeared off the screen and just showed the logo. I can no longer boot into CWM.
I've installed Ubuntu and I'm going to try running the unrbickable java app that a user on here created, hopefully that may work.