Database Info

[Radio] Baseband 2.41.04.02.03 | For Fresh Rom 2.0b

Geek for Me is proud to release:
Updated Radio.img for Android 2.1 (radio version 2.41.04.02.03) for Fresh Rom 2.0b
Thanks to toast for the moral support, and for being the first to test this on his phone. Haha.
This has only been tested and confirmed as working on Fresh 2.0b
Flashing an updated radio will typically give you better battery life and better signal
This won't fix any current problems with the 2.x roms, but it will make your phone more effecient
Don't hold me responsible if you brick your phone
Don't flash this unless you have a CDMA Hero
I wouldn't flash this unless you are on Fresh 2.0b
In case you are wondering, our stock one is 1.04.01.09.21
Check this post for how to flash it: How To: Flash a Radio Update Sprint HTC Hero
DOWNLOAD: http://geekfor.me/downloads/radio-241040203

flipzmode said:
Geek for Me is proud to release:
Updated Radio.img for Android 2.1 (radio version 2.41.04.02.03) for Fresh Rom 2.0b
Thanks to toast for the moral support, and for being the first to test this on his phone. Haha.
This has only been tested and confirmed as working on Fresh 2.0b
Flashing an updated radio will typically give you better battery life and better signal
This won't fix any current problems with the 2.x roms, but it will make your phone more effecient
Don't hold me responsible if you brick your phone
Don't flash this unless you have a CDMA Hero
I wouldn't flash this unless you are on Fresh 2.0b
In case you are wondering, our stock one is 1.04.01.09.21
Check this post for how to flash it: How To: Flash a Radio Update Sprint HTC Hero
DOWNLOAD: http://geekfor.me/downloads/radio-241040203
Click to expand...
Click to collapse
So just a quick question, if I flash this and for some reason I want to restore back to a previous rom will this affect me from doing so?

howcome the version in your screenshot is 2.41.05.02.03 ?

its a typo mine matches the screen shot

Might this finally make my phone show its connected to rev. a? You know know that bug..

I am waiting on the answer about rolling back to 1.5 roms

@linkinx64 its a radio update. I dont see why i would be compatible....just saying.

david279 said:
Might this finally make my phone show its connected to rev. a? You know know that bug..
Click to expand...
Click to collapse
That was fixed by using the Sprint RUU 1.56. Guide/Download

crunchybutternut said:
That was fixed by using the Sprint RUU 1.56. Guide/Download
Click to expand...
Click to collapse
Didn't fix mines buddy

david279 said:
@linkinx64 its a radio update. I dont see why i would be compatible....just saying.
Click to expand...
Click to collapse
did u mean incompatible? or compatible?

sorry yea incompatible.....we all mess up sometimes.

david279 said:
sorry yea incompatible.....we all mess up sometimes.
Click to expand...
Click to collapse
LOL ... i get your point . I am just a little bit skeptical

well i flashed it, i got insurance.

Let us know if it makes a difference, please.

All the radios that flipz has just posted will work and not leave u with a brick. But... sometimes shot happens.

Ok flashing :-s
So far so good..someone in flipz website said that he is seeing a great improvement in battery life

Because the flashing process for a radio is a little different, I'm wondering if I went back to Fresh 1.1 if this radio will work or if I'll have to flash a different radio? Correct me if I'm wrong, but wiping data/flashing roms does NOT change the radio, and it's like a separate firmware entirely...?
I'm leery about flashing if I have to go back to 1.5 and not having a correct radio or not being able to downgrade.

Sirchuk said:
Because the flashing process for a radio is a little different, I'm wondering if I went back to Fresh 1.1 if this radio will work or if I'll have to flash a different radio? Correct me if I'm wrong, but wiping data/flashing roms does NOT change the radio, and it's like a separate firmware entirely...?
I'm leery about flashing if I have to go back to 1.5 and not having a correct radio or not being able to downgrade.
Click to expand...
Click to collapse
I was thinking the same. but radio should not have anything to do with the ROM, besides I am staying 2.1 until the official release

I flashed without any issues. Just make sure you have some battery life left.. probably wouldn't want your phone dying in the middle of this.
Looks good so far to me. As I said, my battery life was already noticeably improved just by updating from 1.5 to this ROM, would be great if this increases it's longevity even more!
Thanks for all the work Flipz/Toast!

Seems to be working just fine on 1.5 Rom. I will update if I experience anything bad.
Great job Flipz!
Ceger

[HOW TO] Get MNS WIRED TETHER working on DamageControl v2.6

Hi!
I can't take credit for this solution... someone else posted it here, but I can't remember where or who this awesome person is. If that person sees this thread, please let me know so I can edit this post and give proper credit... because you're a life saver to anyone who wants to use DamageControl ROMs but needs MNS wired tether working.
I have posted this as a separate thread because this seems to be a hot issue which frequently comes up, and so many people don't search the forums well.
1. Completely wipe your phone in recovery. (Factory/Data, Dalvik, and SD Ext)
2. Install DamageControlv1.1beta5 and reboot after the install, verify in Settings>Software that your PRI is 2.11_002.
3. Reboot to recovery, wipe everything again (although you don't have to wipe SD-Ext, but you should always wipe Data/Factory and Dalvik) and install whatever ROM you want that doesn't usually allow MNS, such as the newest version of DamageControl.
4. Once you're up and running with the ROM of your choice, check to make sure your PRI is still 2.11_002.
5. Plug phone into USB and select Internet Sharing.
I have found that sometimes you have to plug it in a couple of times for the PC to authenticate, but I think that might be a PC issue of mine and not a phone issue.
I can verify that this method does enable MNS wired tether on DC v2.5 and DC v2.6. However, I am not sure if/what other side effects might come from having the 2.11_002 PRI. Market works for me still, Sprint Apps still work too, but there may be other things that don't like this PRI. For example (thanks Flipz for the clarification), PRL will not auto update with this PRI. But if the most important thing to you is MNS on a DamageControl ROM, then this is the way to go.
*Don't flash a ROM that automatically fixes your PRI though, or else all of the trouble you're going to will be undone!
Link to DamageControlv1.1beta5 which contains the PRI you need... http://forum.xda-developers.com/showthread.php?t=652564
ROMs that I can verify have MNS Wired Tether Internet Sharing working using this procedure
DamageControl v2.5
DamageControl v2.6
DarchLegend v5.0

I can confirm this works with DC 2.06, thanks for posting! I went from Flipz 2.0D with his proprietary PRI and MNS didn't work. I couldn't get MNS to work on DC2.06 or DarchLegend 5. My normal PRI is/was 1.70_003 which I understand is one of the culprits responsible for the error 67 message when trying to access MNS. MNS did work great with that PRI on DarchLegend 4.2.2 however.
With the new PRI I am back to the network being "unknown" and no Sprint designations on the lockscreen or task bar. Haven't tried any of the updates (PRL is currently at 60663) but I can update that manually by nandroiding back to a 1.5 rom.
Not sure what other evils may arise due to the new PRI but having MNS working is pretty awesome.

ive been gone for a while, and with all the drama i missed its hard to sift through a search. after trying all the new roms, i ended up with flipz pri. could someone point me to where i might be able to obtain the standard one?
i thankyou most kindly

The updated PRI sometimes breaks Sprint applications. We reverted to have Sprint show up as the carrier again.

sinistermeshes said:
ive been gone for a while, and with all the drama i missed its hard to sift through a search. after trying all the new roms, i ended up with flipz pri. could someone point me to where i might be able to obtain the standard one?
i thankyou most kindly
Click to expand...
Click to collapse
Well, flipz's pri I think is the same as 1.70_003, just renamed in the menu.
You could do the pri reset with your msl to get it back to 1.70_003 though

MrTrip said:
The updated PRI sometimes breaks Sprint applications. We reverted to have Sprint show up as the carrier again.
Click to expand...
Click to collapse
So far, so good with the new PRI. Market works, Sprint Nav works and everything else 'non-Sprint' works. I don't use TV, NFL, Nascar (uninstalled all of them anyway) but best of all, MNS works. I'll keep playing with it and update as neccesary.

Quick question, for MNS, would I have to use USB-tethering app?

pseudoremora said:
Quick question, for MNS, would I have to use USB-tethering app?
Click to expand...
Click to collapse
Unless you're talking about the default menu that pops up when you plug the phone into the computer via USB (the one that gives you four options - charge only, htc sync, disk drive, internet sharing), then no, there's no additional app to download or install in order to make this work. Should be native in any 2.1 ROM.

raynda said:
Unless you're talking about the default menu that pops up when you plug the phone into the computer via USB (the one that gives you four options - charge only, htc sync, disk drive, internet sharing), then no, there's no additional app to download or install in order to make this work. Should be native in any 2.1 ROM.
Click to expand...
Click to collapse
Oh ****, I should have realized that, the default menu. Thanks. There aren't any problems like the older versions of MNS (like on 1.5), where you have to try and beat the network connection so you can tether, right?

pseudoremora said:
Oh ****, I should have realized that, the default menu. Thanks. There aren't any problems like the older versions of MNS (like on 1.5), where you have to try and beat the network connection so you can tether, right?
Click to expand...
Click to collapse
not if you're using the wrong pri
it should work fine.

im curious if this method would work on fresh 2.0d... i know when you "flash" it your pri gets fixed, but what if you flashed DC, thus fixing your PRI and then restored the fresh 2.0d nandroid?

dmc971989 said:
im curious if this method would work on fresh 2.0d... i know when you "flash" it your pri gets fixed, but what if you flashed DC, thus fixing your PRI and then restored the fresh 2.0d nandroid?
Click to expand...
Click to collapse
That should work since the nandroid won't touch the PRI

abcdfv said:
That should work since the nandroid won't touch the PRI
Click to expand...
Click to collapse
fresh is by far the most stable daily rom for me plus i get crazy battery life out of it, the only thing its been missing is MNS... ill test this out tommorow and report back

raynda said:
Hi!
I can't take credit for this solution... someone else posted it here, but I can't remember where or who this awesome person is. If that person sees this thread, please let me know so I can edit this post and give proper credit... because you're a life saver to anyone who wants to use DamageControl ROMs but needs MNS wired tether working.
I have posted this as a separate thread because this seems to be a hot issue which frequently comes up, and so many people don't search the forums well.
1. Completely wipe your phone in recovery. (Factory/Data, Dalvik, and SD Ext)
2. Install DamageControlv1.1beta5 and reboot after the install, verify in Settings>Software that your PRI is 2.11_002.
3. Reboot to recovery, wipe everything again (although you don't have to wipe SD-Ext, but you should always wipe Data/Factory and Dalvik) and install whatever ROM you want that doesn't usually allow MNS, such as the newest version of DamageControl.
4. Once you're up and running with the ROM of your choice, check to make sure your PRI is still 2.11_002.
5. Plug phone into USB and select Internet Sharing.
I have found that sometimes you have to plug it in a couple of times for the PC to authenticate, but I think that might be a PC issue of mine and not a phone issue.
I can verify that this method does enable MNS wired tether on DC v2.5 and DC v2.6. However, I am not sure if/what other side effects might come from having the 2.11_002 PRI. Market works for me still, Sprint Apps still work too, but there may be other things that don't like this PRI. For example (thanks Flipz for the clarification), PRL will not auto update with this PRI. But if the most important thing to you is MNS on a DamageControl ROM, then this is the way to go.
*Don't flash a ROM that automatically fixes your PRI though, or else all of the trouble you're going to will be undone!
Link to DamageControlv1.1beta5 which contains the PRI you need... http://forum.xda-developers.com/showthread.php?t=652564
ROMs that I can verify have MNS Wired Tether Internet Sharing working using this procedure
DamageControl v2.5
DamageControl v2.6
DarchLegend v5.0
Click to expand...
Click to collapse
ugh the link for the 1.6.2 recovery in your signature is for the GSM hero! i flashed that to my phone by mistake took me forever to figure out what was going on.

raynda said:
Hi!
I can't take credit for this solution... someone else posted it here, but I can't remember where or who this awesome person is. If that person sees this thread, please let me know so I can edit this post and give proper credit... because you're a life saver to anyone who wants to use DamageControl ROMs but needs MNS wired tether working.
I have posted this as a separate thread because this seems to be a hot issue which frequently comes up, and so many people don't search the forums well.
1. Completely wipe your phone in recovery. (Factory/Data, Dalvik, and SD Ext)
2. Install DamageControlv1.1beta5 and reboot after the install, verify in Settings>Software that your PRI is 2.11_002.
3. Reboot to recovery, wipe everything again (although you don't have to wipe SD-Ext, but you should always wipe Data/Factory and Dalvik) and install whatever ROM you want that doesn't usually allow MNS, such as the newest version of DamageControl.
4. Once you're up and running with the ROM of your choice, check to make sure your PRI is still 2.11_002.
5. Plug phone into USB and select Internet Sharing.
I have found that sometimes you have to plug it in a couple of times for the PC to authenticate, but I think that might be a PC issue of mine and not a phone issue.
I can verify that this method does enable MNS wired tether on DC v2.5 and DC v2.6. However, I am not sure if/what other side effects might come from having the 2.11_002 PRI. Market works for me still, Sprint Apps still work too, but there may be other things that don't like this PRI. For example (thanks Flipz for the clarification), PRL will not auto update with this PRI. But if the most important thing to you is MNS on a DamageControl ROM, then this is the way to go.
*Don't flash a ROM that automatically fixes your PRI though, or else all of the trouble you're going to will be undone!
Link to DamageControlv1.1beta5 which contains the PRI you need... http://forum.xda-developers.com/showthread.php?t=652564
ROMs that I can verify have MNS Wired Tether Internet Sharing working using this procedure
DamageControl v2.5
DamageControl v2.6
DarchLegend v5.0
Click to expand...
Click to collapse
also after flashing 1.1beta5 my pri still remains at 1.70_003..any ideas?

ajaholic said:
also after flashing 1.1beta5 my pri still remains at 1.70_003..any ideas?
Click to expand...
Click to collapse
I was going through this procedure last night and the same thing happened to me. I did steps 1 and 2 a second time and after that the PRI was set to 2.11_002.
And thanks for the directions OP! This is the first time I've had wired tethering working on my Hero (without a paid application)

i would like to add that this does work on fresh 2.0d... but for some reason my nandroid wouldnt restore correctly, i had to restore an older nandroid and i lost a couple things

dmc971989 said:
i would like to add that this does work on fresh 2.0d... but for some reason my nandroid wouldnt restore correctly, i had to restore an older nandroid and i lost a couple things
Click to expand...
Click to collapse
I'm building a feature in to the kitchen that will let you easily switch between PRI's. I know I've said that somewhere else but I don't think I did in this thread. So keep an eye out for that.

flipzmode said:
I'm building a feature in to the kitchen that will let you easily switch between PRI's. I know I've said that somewhere else but I don't think I did in this thread. So keep an eye out for that.
Click to expand...
Click to collapse
This is very exciting news!

does anyone have the new pri to update manually? the one link in the damagecontrol 2.07_2 thread is dead

[ Radios ][ 9-5 ] All EVO Radio, WiMAX, PRI, NV & HBoot versions

If you have 4G connection issues, be sure to update Profile after updating by going into Settings\System Updates
Combo - Must be NAND unlocked(S-OFF) to flash - May require reflashing the kernel afterwards
EVO_Radio_2.15.00.08.08_WiMAX_27243_PRI_NV_2.15_003 - Includes latest Radio, WiMAX, PRI & NV
Radio - Must be NAND unlocked(S-OFF) to flash - May require reflashing the kernel afterwards
EVO_Radio_2.15.00.08.08 - Latest
EVO_Radio_2.15.00.05.02
EVO_Radio_2.15.00.04.08
EVO_Radio_2.15.00.11.19
EVO_Radio_2.15.00.09.01
EVO_Radio_2.15.00.07.28
EVO_Radio_2.15.00.07.21
EVO_Radio_2.05.00.06.10
EVO_Radio_1.39.00.05.31
EVO_Radio_1.36.00.04.02
WiMAX - Must be NAND unlocked(S-OFF) to flash
EVO_WiMAX_27243 - Latest
EVO_WiMAX_27925
EVO_WiMAX_27167_R01
EVO_WiMAX_26023_R01
EVO_WiMAX_25641_R01
EVO_WiMAX_25043_R04
EVO_WiMAX_24722
PRI - Must be NAND unlocked(S-OFF) to flash
EVO_PRI_2.15_003 - Latest
EVO_PRI_1.90_003
EVO_PRI_1.77_003
EVO_PRI_1.34_003
NV - Must be NAND unlocked(S-OFF) to flash
EVO_NV_2.15_003 - Latest
EVO_NV_1.90_003
EVO_NV_1.77_003
EVO_NV_1.71_003
EVO_NV_1.40_003
HBoot - Must be NAND unlocked(S-OFF) to flash - May require reflashing the kernel afterwards
EVO_HBoot_2.16.0001 - Not downgradeable - Latest
EVO_HBoot_2.15.0001 - Not downgradeable
EVO_HBoot_2.10.0001 - Not downgradeable
EVO_HBoot_2.02.0000 - Not downgradeable
EVO_HBoot_0.97.0000
EVO_HBoot_0.93.0000
EVO_HBoot_0.76.2000 - ENG, supports Fastboot commands

Thanks For CalKulin.. Sometimes we forget the little things..
K, so this is from newest to oldest I see, top-down..
Oh, and of course the grand question of it all, does the new wimaxx "write" itself..
Thanks..

Yes I flashed them and verified they all write correctly

is the lates radio and wimax update available to be used with the newest fresh evo 0.5.3, or does it still require yesterdays OTA update system files.

6.10 when did this happen
sent with my evo from a secret place

Calkulin said:
Yes I flashed them and verified they all write correctly
Click to expand...
Click to collapse
K, going to to test the new wimaxx radio.. Thanks Cal for this always..
Hopfully this will work with the new DC 3.2.2.1.. Or just the rooted rom you made of the OTA..
Oh, can we please get update 1.2 or 2.0 since this is a new rom.. From you..
I always trust things from you as I have from the Moment.. Thanks Dude..

I'm new to android/rooting so I have a couple of questions. I just did a full root, and from what I've read, I just have to get into recovery mode (via prompt -> "adb reboot recovery", is there a easier way?) and then select the package and install from the menu, right? Aside from that, is it safe to downgrade radios in the case where a newer one performs poorly?

detusueno said:
I'm new to android/rooting so I have a couple of questions. I just did a full root, and from what I've read, I just have to get into recovery mode (via prompt -> "adb reboot recovery", is there a easier way?) and then select the package and install from the menu, right? Aside from that, is it safe to downgrade radios in the case where a newer one performs poorly?
Click to expand...
Click to collapse
Yeah, if you run into an issue with a radio, feel free to play around and find which one works for you.
Personally, I've had all sorts of issues with the newest 3G radio. Lots of data connection lost message, and other garbage.

Okay, I want to make a note of this:
This is for CalKulins good work..
I have tested the new wimaxx and it works, it really writes and works.. I can now access 4G on the new 1.47 ota.. And all others under it.. Along with great reception and all working well with the new radio..
K, Thats out the way, this is for you others who are leery, go on and flash, it is fixed..

Not sure if those links are signed (for protected recovery users) but they are available below if needed .
MEGAUPLOAD: HTC Evo Radio 2.05.00.06.10
MEGAUPLOAD: HTC Evo Wimax 25641_R01

Crackbone said:
Yeah, if you run into an issue with a radio, feel free to play around and find which one works for you.
Personally, I've had all sorts of issues with the newest 3G radio. Lots of data connection lost message, and other garbage.
Click to expand...
Click to collapse
Cool.. I'm flashing the newest ones now. I just remember their being issues when flashing back to older radios on WinMo, of course, this ain't WinMo anymore but it never hurts to be sure.

can I use these with the new fresh rom

I'm interested in knowing the same as others, is it possible to just flash over any other ROM, like Fresh or does it have to be the over new OTA system files only?
Thanks!

Can this be flashed on top of the Unrevoked root?

Worked great, thanks Calk.
Scanning forever, but that's to be expected with the newest radio/older firmware.

thanks for the links. Worked great

I'm currently on DC 3.2.2 with the latest Radio (2.05.00.06.10) and the oldest WiMax (24722).
My MAC address currently matches the one on my rear label.
I'm not 100% sure on what my next step should be. I'm not sure how one updates the PRL/Profile, but I've seen it mentioned a lot. Should I just grab the latest WiMax from here and flash it? I unfortunately have no 4G near me to test my phone to make sure it's even working right now, but I will be in Baltimore a lot this summer and wish to use it there.

From what I can see the wimax radio did not overwrite my mac address but no 4G so

freeza said:
Worked great, thanks Calk.
Scanning forever, but that's to be expected with the newest radio/older firmware.
Click to expand...
Click to collapse
What ROM are using? 1.32 or 1.47 based?

ThornXBL said:
I'm currently on DC 3.2.2 with the latest Radio (2.05.00.06.10) and the oldest WiMax (24722).
My MAC address currently matches the one on my rear label.
I'm not 100% sure on what my next step should be. I'm not sure how one updates the PRL/Profile, but I've seen it mentioned a lot. Should I just grab the latest WiMax from here and flash it? I unfortunately have no 4G near me to test my phone to make sure it's even working right now, but I will be in Baltimore a lot this summer and wish to use it there.
Click to expand...
Click to collapse
You can flash the latest WiMAX if you want and update prl & profile are in settings/system updates

[GINGERBREAD] Android 2.3 port from SDK for Dream (2708 kernel)

AOSP 2.3 has been released and this thread is now useless
If you wanna follow our work with aosp 2.3.1 for dream/sapphire :
Source Code Repo for Gingerbread (Dream and Sapphire builds)
Compiled builds
MODs bootanimation, superuser, terminal emulator, live wall papers support, google apps, market 2.2.7, etc...
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Since people were asking for it, here is a quick port for the G1
Thanks and credits goes to :
-pershoot using his kernel boot-cm_2635.9_ds_32b_radio2708-oc-uv-xtra-ram-fp-120810
-seo using mostly his port for magic as base
I'm currently using the 14MB ram hack with radio 2.22.28.25 & hboot 1.33.0013d with CM6.1
If you are not you need to follow these steps first : 2708+ enabled kernel [14MB ram with radio 2.22.27.08/2.22.28.25 & hboot 1.33.0013d]
OR
you can always try to flash a non 2708 kernel from pershoot like boot-cm_2635.9_ds_32b-oc-uv-xtra-ram-fp-120810 after flashing this ROM but I have'nt tested it myself.
working : data/radio but like all other ports no mic
not working : mostly everything
seo has wifi working on magic, I'm looking into his wpa_supplicant.exec script but changing wlan.ko and driver did'nt worked.
For wiping I suggest using Ohsaka SuperWipe as the update script does'nt wipe /data partition.
Download link : here

Nice, I'll flash it shortly

Nice!!
3G connection(Magic 32B) is working!

can some one post some pics please

Unassigned file limit of 10 downloads reached.
Click to expand...
Click to collapse
would flash it, but i need a mirror

flashed it but no notifications bar? lol

bypass23 thanks your hard work
flashed already,It runs slowly...
no wifi
no BT
can not set time&date
but i believe 2.3 will come to G1 and work great

flashed, works, but sloooow, as expected
well, restoring previous rom

reiga said:
would flash it, but i need a mirror
Click to expand...
Click to collapse
updated download link sorry

komeup said:
can some one post some pics please
Click to expand...
Click to collapse
I added some, nothing special but enjoy

I've got a problem,
I nand backuped my phone, wiped, flashed 2.3, wiped, and nand restored my previous backup, and now my HOME and CALL button is not working, when I press them, no response
do you have any ideas what could it cause? how to fix this?

ra100x said:
I've got a problem,
I nand backuped my phone, wiped, flashed 2.3, wiped, and nand restored my previous backup, and now my HOME and CALL button is not working, when I press them, no response
do you have any ideas what could it cause? how to fix this?
Click to expand...
Click to collapse
I just did a SuperWipe + nand restore to CM6.1 and both HOME and CALL buttons are working properly.
I just added a link for Ohsaka's SuperWipe in the OP, use it to wipe before doing your restore. (needs to be flashed)

bypass23 said:
I just did a SuperWipe + nand restore to CM6.1 and both HOME and CALL buttons are working properly.
I just added a link for Ohsaka's SuperWipe in the OP, use it to wipe before doing your restore. (needs to be flashed)
Click to expand...
Click to collapse
thanks, but I wiped it with Ohsaka SuperWipe, before and after 2.3, I don't understand, I'll try it again, but I'll try to fix_permissions first, don't think it could have something with my issue, but it's worth trying
and one more thing, my PC now doesn't recognize my phone as USB device, will try something and post results

ra100x said:
thanks, but I wiped it with Ohsaka SuperWipe, before and after 2.3, I don't understand, I'll try it again, but I'll try to fix_permissions first, don't think it could have something with my issue, but it's worth trying
and one more thing, my PC now doesn't recognize my phone as USB device, will try something and post results
Click to expand...
Click to collapse
Flash a stock ROM? It's probably a good idea to make a new thread for your issue tbh, since it's not really that relevant to the ROM.

AdrianK said:
Flash a stock ROM? It's probably a good idea to make a new thread for your issue tbh, since it's not really that relevant to the ROM.
Click to expand...
Click to collapse
problem solved, flashed Biffmod 2.1, then nand restore, buttons work fine
can someone delete my lame problem?

You just some-what single-handedly saved the G1 from dying out. Mine was stolen a while ago, but I still check back on this Thread and I'm so happy you took the time to Port the ROM. Great job my friend.
Maybe these GApps will help: http://bit.ly/fyOUMI
Got it from: http://forum.xda-developers.com/showthread.php?t=864403

Wow, thunderspeed!Nice Work!
But wondering when would Milestone XT702 got one

Lol lucky y'all... Got ginger bread before us G2 folks
Sent from my HTC Vision using XDA App

I flashed it ,it's slowly....and can not change time setting`` it is not perfect````and now just need to wait for the new 2.3 rom for G1 and wish it more better....

Original Android <3ers! said:
You just some-what single-handedly saved the G1 from dying out. Mine was stolen a while ago, but I still check back on this Thread and I'm so happy you took the time to Port the ROM. Great job my friend.
Click to expand...
Click to collapse
It sounds more like it's on life support, and a lot of people (mainly developers) wanna pull the plug. To them, the G1 phones are nothing but a waste of time, when compared to a lot of the newer phones on the market.
The reality though, it isn't much different then a lot of new phones on the market. I gotta have a hardware keyboard, and that limits me to the myTouch 3G Slide, and the G2. Frankly, the Slide is essentially the same thing as my G1, with lots more memory, and a better camera. My friend replaced his G1 with the Cliq, and he thought it was an upgrade, but didn't understand why Angry Birds was still slow?
So long as there's App2SD applications, over priced phones, and smart coders, the G1 lives on.

Stop Waiting for TMO to Update to ICS!

If you are waiting for TMO to Update the Sensation to ICS you should stop waiting and update to ARHD. I am a ARHD user and have been applying each update as it comes down and have had no issues at all. Battery life has improved ten fold and Android 4.0.3 is great.
If you are concerned about the warranty issues with rooting, don't be. You are on the XDA forum, so I will assume that you have at least a basic understanding of how to operate your computer. It is a simple process and you would have to be a complete idiot to screw it up.
Take it from me, switch to ARHD and you will be beyond happy!

gdwhite said:
If you are waiting for TMO to Update the Sensation to ICS you should stop waiting and update to ARHD. I am a ARHD user and have been applying each update as it comes down and have had no issues at all. Battery life has improved ten fold and Android 4.0.3 is great.
If you are concerned about the warranty issues with rooting, don't be. You are on the XDA forum, so I will assume that you have at least a basic understanding of how to operate your computer. It is a simple process and you would have to be a complete idiot to screw it up.
Take it from me, switch to ARHD and you will be beyond happy!
Click to expand...
Click to collapse
x2 arhd is good stuff along with many other roms in the dev forum

ARHD is Sense, 'tis not?

enserio said:
ARHD is Sense, 'tis not?
Click to expand...
Click to collapse
Yes, and the update from HTC will be Sense also...so no point in waiting? Getting off base install from TMO did wonders for the speed of my Sensation.
I know some people are concerned about losing Wifi calling, but it seems to work in ARHD and Virtuous ROMs just fine (btw Virtuous does NOT have Sense). I had one minor hiccup with it in an older ARHD version, but its stable now.
I was worried about losing my warranty, but if you follow the S-off/on procedure closely, you can revert your phone back to normal in case you need warranty service!

demonsavatar said:
Yes, and the update from HTC will be Sense also...so no point in waiting? Getting off base install from TMO did wonders for the speed of my Sensation.
Click to expand...
Click to collapse
Yummy what do you mean, the official ICS OTA for T-Mobile US has not been released yet?

Would love to update but the procedure seems extremely convoluted with unknown result. I am now trying to find a Youtube guide or something of this sort.

Im on ARHD right now but i would love to flash a stock ICS...problem is everytime i followed one of the guides out there i ran into a problem. I guess its because the guides are not for Sensation 4G.
Would be really nice if someone can put up a guide on how to flash a stock ICS on Sensation 4G tmo.

Question for you all. My phone is stock. If I do one of these ICS ROMs, will that wipe out all the apps I have installed and their progress? Will it make my phone like brand new?
I'm ASSUMING if I wait for the T-Mobile ICS it will keep all of my apps and their info?
Thank you
Jerry

I got tired of waiting.
I tried AHRD first and it's good. I ran it for about a week playing with sebatian's and faux's kernels. I've been running Elegancia for the last week with Bricked kernel I like it more.
I want to try CM9 when it's fully operational for a pure AOSP experience. I also want to try a Sense 4 ROM, but I understand BT isn't fully functional yet and I need that in the car - and I'm reading bad reports on battery life at this point.
---------- Post added at 10:36 AM ---------- Previous post was at 10:29 AM ----------
hortaja said:
Question for you all. My phone is stock. If I do one of these ICS ROMs, will that wipe out all the apps I have installed and their progress? Will it make my phone like brand new?
I'm ASSUMING if I wait for the T-Mobile ICS it will keep all of my apps and their info?
Thank you
Jerry
Click to expand...
Click to collapse
Your data will be wiped and you'll be doing setup like a new phone.
Download Titanium Backup first and backup all your apps/data. You're apps should auto install after you flash the ROM - or you can install them manually. Then you can restore your app data from Titanium and your game progress will be back.
I don't know if waiting for T-mo's update will require the same backup or not. But give that firmware will be updated and a complete OS update, I don't see how your app data would be safe then either.

rebar71 said:
I don't know if waiting for T-mo's update will require the same backup or not. But give that firmware will be updated and a complete OS update, I don't see how your app data would be safe then either.
Click to expand...
Click to collapse
With a stock OTA update, the update is installed via the stock recovery. The stock recovery makes a backup first before flashing the update. After the update is flashed the stock recovery takes and installs all your apps and other data from the backup it made. This way when you flash the OTA the end user does not loose all their settings, apps, and personal ink saved on their device.

T-Macgnolia said:
With a stock OTA update, the update is installed via the stock recovery. The stock recovery makes a backup first before flashing the update. After the update is flashed the stock recovery takes and installs all your apps and other data from the backup it made. This way when you flash the OTA the end user does not loose all their settings, apps, and personal ink saved on their device.
Click to expand...
Click to collapse
Thank you so much for this info.