[Q] help to fix hp voicmessenger - Non-Touchscreen Windows Mobile Other

hi all
i try to upgrade my hp voie messenger to wm 6.5
after i start it stop
when i tried to open it again
it only show hp logo
how i can fix this problem???????????????

alkaser89 said:
hi all
i try to upgrade my hp voie messenger to wm 6.5
after i start it stop
when i tried to open it again
it only show hp logo
how i can fix this problem???????????????
Click to expand...
Click to collapse
flash it again, after the flashing process do a hard reset!

hi how can i flash it it not connect to pc
when i open the phone am not able to do any thing even close the phone
and which bottom i have to press to inter the bootlodar

alkaser89 said:
hi how can i flash it it not connect to pc
when i open the phone am not able to do any thing even close the phone
and which bottom i have to press to inter the bootlodar
Click to expand...
Click to collapse
try hard reset:
http://forum.gsmhosting.com/vbb/archive/t-443805.html

i got it
but i face another problem
when i connected to pc the wmdc not sync.......
how i can flash the rom from the card

alkaser89 said:
i got it
but i face another problem
when i connected to pc the wmdc not sync.......
how i can flash the rom from the card
Click to expand...
Click to collapse
try xp with active sync

Related

whaa!help needed!

Hello there,
I tried to flas my MDA and now it stays in bootloader (1.01). Whatever I do: it stays there! (hard/factory reset and what not). Whenever I want to install a new rom by a RUU application, this goes wrong as well!Any help would be much appreciated!
Ive the same problem @ the moment! I tried to do a Rom update and then an error appeared and the installation failed and the recovery afterwards aswell! Now my Universal stucks in the bootloader mode showing USB v. 1.01! How can I get out of this mode! I tried the hard reset, like joenie described but i didnt work!
Aalsen said:
Ive the same problem @ the moment! I tried to do a Rom update and then an error appeared and the installation failed and the recovery afterwards aswell! Now my Universal stucks in the bootloader mode showing USB v. 1.01! How can I get out of this mode! I tried the hard reset, like joenie described but i didnt work!
Click to expand...
Click to collapse
I have the same problem sometimes when I change ROM version, the installer reboots the PDA in USB mode and nothing, the installer display an error and crash. The PDA in not recognized correctly in USB mode.
It is due to your PC (Activesync crashes in silent mode and disable WM device drivers) and not the UNI!!!
Try restart activesync (open it), unplug and replug the UNI and restart installer, the installer will not recognize the actual ROM version but it should be working...
If it fails try to restart the PC or uninstall and reinstall activesync and retry installation...
Be carrefull because in USB boot mode the UNI cannot charge the battery, if the battery is down, you cannot restart installation (And cannot disable boot mode).
I was affraid the first time of USB boot lock (It was the panic, UNI bricked...) but now, I know the problem and I resolve it fastly (restart activesync).
Good luck!!!
Hey thanks for all the advices! i found a really good tutorial how to unbootloader it. But the actuall problem is that windows vista is not having any active sync like Windows XP. I now you can download a windows mobile device manager and I tried the deactivation of the USB port over this one, but it didnt work! Is there any other methode oder way how to get access to the phone to change the status?
Thank You very much!
Aalsen
Aalsen said:
Hey thanks for all the advices! i found a really good tutorial how to unbootloader it. But the actuall problem is that windows vista is not having any active sync like Windows XP. I now you can download a windows mobile device manager and I tried the deactivation of the USB port over this one, but it didnt work! Is there any other methode oder way how to get access to the phone to change the status?
Thank You very much!
Aalsen
Click to expand...
Click to collapse
Can you add here the link of the tutorial???
May be try remove usb devices in the device manager of Vista and reboot the PC to redetect the UNI USB drivers.
well lad's and gent's..
I found out what my real problem was
It was a broken USB-cable :|.. wtf!!!
Well anyway. I think you guys are great! all the posts/helps!!
It some else to do???
I try to flash my JASJAR and I brick it........The instaler send my an error and I stuck in bootloader but the instaler window says to cool reset the Universal and the Bootloader was gone and the universal now is death, can't turn on and no Boot...Its bricked and I still crying!!!!.....
Well I have installed a new Rom yesterday on my Q9000...
I whas using my laptop which has Vista on it. Dont know what happend but I got an error msg on my laptop...Tried to reboot my Qtek but it whas hanging on the bootup screen(the 1st screen which shows all Rom/ext rom and Radio version). No matter what I did it refused to bootup...
When plugging in my Qtek on to my laptop, the bootloader screen changed from serial to Usb...
Finally I tried it on the desktop wich still runs on XP and it did the Romupgrade without any pain...
I did several Romupgrades on my Herald all on my Vista laptop without any problems...I don't really understand what or why, maybe because the Qtek is older than the P4350 that it is less compatible with Vista?
Bottom line, I now have a Qtek 9000 which is fast ...

my pda doesn't work anymore after installation

Hi my Qtek 9000 doesn't work anymore after installation of Ranju_v77_WM61_19900_19900_1_0_2.
it never finished it.
but when i try to recovery on qtek or with the pc, with the Ranju installation program.
it also said don't look weird if you only got usb with the version number on your pda screen.
that window comes after if the installation failed, but when i try to back it up the program stops working.
so now i can't use my pda please help me.
Greetz, (n00b)
pommie said:
Hi my Qtek 9000 doesn't work anymore after installation of Ranju_v77_WM61_19900_19900_1_0_2.
it never finished it.
but when i try to recovery on qtek or with the pc, with the Ranju installation program.
it also said don't look weird if you only got usb with the version number on your pda screen.
that window comes after if the installation failed, but when i try to back it up the program stops working.
so now i can't use my pda please help me.
Greetz, (n00b)
Click to expand...
Click to collapse
Hi,
The answers you seek are in the WIKI.
Hold the backlight + power button whilst resetting the device. This will put you back into bootloader mode, you can then reflash the Rom.
I would also advise that you SuperCid your device before flashing any Roms, if you haven't done so already.
Again this is documented in the Wiki.
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Cheers,
Beasty
my screen show me serial v1.01 and if i put the usb cable in it shows me usb v1.01
on my pc it installed as microsoft usb sync, but it won't connect on windows mobile device center.
so i can't use mtty even if i unselect usb in windows mobile device center i still can't select usb in mtty ive tried few times to delete and reinstall on my pc but still does not work.
pommie said:
my screen show me serial v1.01 and if i put the usb cable in it shows me usb v1.01
on my pc it installed as microsoft usb sync, but it won't connect on windows mobile device center.
so i can't use mtty even if i unselect usb in windows mobile device center i still can't select usb in mtty ive tried few times to delete and reinstall on my pc but still does not work.
Click to expand...
Click to collapse
The problem is Vista!
Search the forum and you will find a post with a fix (old drivers) for Vista, or just use a Windows XP or previoous MS OS to flash your device.
I would suggest XP if you plan to keep flashing in the near future
do i need to super cid my htc universal in order to upgrade to ranju v77. my universal is branded dopod 900 and can use with any simcard. thanks
lucky for me, i also got a pc with xp sp2 but my pda works with ranju v77 thnx man.
only from nokia phones i can't send file with bluetooth, phones like samsung works fine

Unable to connect with activesync after misread instructions on flashing

Hello guys!
I've got a bit of a problem here, because now my mobile refuses to connect with activesync and therefore making it impossible to flash it.
I read the readme in the cid bypass folder, and didn't quite understand it, but as keen as I was on getting a new rom I did it all wrong.
I actually copied the cid bypass folder to my sd-card and ran haret.exe from the phone. A friendly penguin appeared along with some green text, and it rebooted and went black. I waited for a while, but had no patience so I rebooted it again. But after this it has been impossible to connect it with activesync! I've tried hard reset and different computers but nothing works!
I'm hoping someone on this forum can help me!
best regards
Try this.
turn your phone off and press the camera button in then plug it into the USB port
you should get a multi color screen. If you do then you can flash.
But go here http://forum.xda-developers.com/showthread.php?t=330909
Go to where it says EDIT and follow what it says.
Oh and when a dos box opens up and ask you things just press the return key each time.
good luck
hey man, I tried reflashing the original rom to my vox, with the manualstyle sd card flash. So now it's flashed with the original rom, but still activesync doesn't work! anybody have an idea on how to make this right?
somebody tried running haret.exe from their phone, then flashing the Uspl with ruu flasher and then flash the new cooked rom?
My phone is not able to connect for flashing while in black state (after running harET), is it stupid of me to reboot it and start it by holding camera button while plugging it in to the computer? and then flash it with the ruu?
somebody please help me?
go into settings then connections then more till you see USB to PC
in there un-tick the box which says enable advaned network.
zipuz said:
somebody tried running haret.exe from their phone, then flashing the Uspl with ruu flasher and then flash the new cooked rom?
My phone is not able to connect for flashing while in black state (after running harET), is it stupid of me to reboot it and start it by holding camera button while plugging it in to the computer? and then flash it with the ruu?
somebody please help me?
Click to expand...
Click to collapse
I am confused..is it working or not? one post you say it is but you cant sink..then you say its not.????
and dont use the flash off the mem stick..use windows..
ok, sorry for making confusing posts! I'm just excited about getting it to work.
So here's the situation:
From stock phone used with exchange (turned off the exchange part before doing anything)
1. I ran haret.exe from my phone, and it rebooted into a "black state" after which I rebooted it again
2. I tried to connect it to my computer using activesync, to be able to flash, but it wouldn't connect. Activesync doesn't respond to my phone.
3. I flashed the shipped rom to my phone from my sd-card in good hope that it would reset the whole process, but it still won't connect to activesync.
So here's my problem; I want to flash a cooked rom to my phone, but I'm unable to connect it to my computer via activesync, what to do?
deuse said:
go into settings then connections then more till you see USB to PC
in there un-tick the box which says enable advaned network.
Click to expand...
Click to collapse
tried with both ticked and unticked, still nothing
Turn off your phone then keep the camera button pressed in at the same time plug it into the usb port
your should show diff colors on the screen..if so follow what it says in this link.
http://forum.xda-developers.com/showthread.php?t=330909
and do it from the pc not your mobile...
it's restored, but no activesync still
Is the cable you are using ok? or is it a new one you just got.
does windows see it when you plug it in? if so un-install active sync then reinstall it.
I'm having the same issue with Windows Mobile 6.5 ROM, activesync simply doesn't work ;/
ivanek666 said:
I'm having the same issue with Windows Mobile 6.5 ROM, activesync simply doesn't work ;/
Click to expand...
Click to collapse
Have you been into settings and un-ticked the box in USB to PC?
Also if you are trying to sync to office you must create a new partnership
google is your best friend.
I have no problems with sync in XP/Vista?windows 7 and office 2007
I am using FMs 1.1 WM 1.1
deuse said:
Is the cable you are using ok? or is it a new one you just got.
does windows see it when you plug it in? if so un-install active sync then reinstall it.
Click to expand...
Click to collapse
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
zipuz said:
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
Click to expand...
Click to collapse
Do the Hard reset .Then connect it to your machine.I hope this time it will work smoothly.
zipuz said:
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
Click to expand...
Click to collapse
Try this
open sync then at the top chose files then click on DELETE MOBILE DEVICE
see what happens..but post back if you fix it to help other people
yogusmilu said:
Do the Hard reset .Then connect it to your machine.I hope this time it will work smoothly.
Click to expand...
Click to collapse
I failed to mention that I've tried the hard reset as well, no luck.
I thought about the same thing Deuse, but there's no mobile device registered, so I'm not able to delete it.
It seems that you have tried every possible method! Anyway, my suggestion is install activesync in some other PC (friend's) and connect your phone there. See if it registers the phone. If it does then it is problem with the PC and not with phone. In that case, connect phone to PC and open controlpanel>System (icon)>Hardware tab>Device Manager Button in your PC. Unfold Network adapters and see if your phone is detected properly or it is detected with an "!" mark in "Unknown/Other device". If so, delete the device and disconnect phone. Reboot PC, reboot phone connect again and let the PC reinstall your device and see if it recognises your phone.
One more way (I think you might have tried this)- Uninstall Activesync and reinstall and connect phone.
By the way if your phone is not recognised in some other PC then it seems trouble with the phone.
Thanks.
Looks like your cable is faulty. Try activesync connection through bluetooth (for testing, ofcourse you cant flash from bt ).
parthabhatta said:
It seems that you have tried every possible method! Anyway, my suggestion is install activesync in some other PC (friend's) and connect your phone there. See if it registers the phone. If it does then it is problem with the PC and not with phone. In that case, connect phone to PC and open controlpanel>System (icon)>Hardware tab>Device Manager Button in your PC. Unfold Network adapters and see if your phone is detected properly or it is detected with an "!" mark in "Unknown/Other device". If so, delete the device and disconnect phone. Reboot PC, reboot phone connect again and let the PC reinstall your device and see if it recognises your phone.
One more way (I think you might have tried this)- Uninstall Activesync and reinstall and connect phone.
By the way if your phone is not recognised in some other PC then it seems trouble with the phone.
Thanks.
Click to expand...
Click to collapse
It's marked with an "!", will try it on my own pc next time I have it, worked there last time! if not, I'll have to live with

Problems Upgrading I-Mate Jam to HTCMAG_ROM_WWE_O2

Original Title: what is the solution <<>> cotulla
Hi guys
I was trying to upgrade my I mate Jam to HTCMAG_ROM_WWE_O2
I followed the instructions but after the hard reset the screen stay on USB and down there is v1.00 and nothing else, On my PC its only shows please wait and dont remove or dissconnect >>etc.
what is the solution with it,
regards
By the way where I can be back to the old version ,,
Which OS do you use on your PC?
Vista and 7 did not work for me. Only Xp.
orbN said:
Which OS do you use on your PC?
Vista and 7 did not work for me. Only Xp.
Click to expand...
Click to collapse
Yeah that was the problem,, I use WIndows 7 on my labtop,,
I tried at home using XP it worked but now the problem is showing on the screen as follows :
HTCMAG_ROM_WWE_3
by Cotulla
64RAM
Bad Radio
I tried to hard reset using contacts and calender with softreset it tells to press the green blah blah..
I did and still the same.
I tried to install any other upgrade else than WWE_3 but nothing
Help please;
Hi,
install the required radio 1.12.
So long,
MrFX
MisterEffiks said:
Hi,
install the required radio 1.12.
So long,
MrFX
Click to expand...
Click to collapse
Can't do anything. when I hard reset it shows the USB and version blah blah then it restart again..
I tried to install the original rom and any other rom but same problem.
if connected to the computer via USB it keep restarting over and over
and other solution ??
will Bootloader help ? I tried but it is still the same issue.
torontovka said:
Can't do anything. when I hard reset it shows the USB and version blah blah then it restart again..
I tried to install the original rom and any other rom but same problem.
if connected to the computer via USB it keep restarting over and over
and other solution ??
will Bootloader help ? I tried but it is still the same issue.
Click to expand...
Click to collapse
I'm Having the same problem, so please if anyone know the solution please post it here...
Thanks in Advance...
torontovka said:
Original Title: what is the solution <<>> cotulla
Hi guys
I was trying to upgrade my I mate Jam to HTCMAG_ROM_WWE_O2
I followed the instructions but after the hard reset the screen stay on USB and down there is v1.00 and nothing else, On my PC its only shows please wait and dont remove or dissconnect >>etc.
what is the solution with it,
regards
By the way where I can be back to the old version ,,
Click to expand...
Click to collapse
Hey I came up with a solution, worked for my device hope it would w0rk for y0u either...
Anyhow, when it shows usb/cable at the top and radio version at bottom, Press and hold Contacts and calendar button and press Reset button with your stylus, this will hard reset your device and will bring your device alive...
looking forward for your reply...
HaSnAiN.ZaiDi said:
Hey I came up with a solution, worked for my device hope it would w0rk for y0u either...
Anyhow, when it shows usb/cable at the top and radio version at bottom, Press and hold Contacts and calendar button and press Reset button with your stylus, this will hard reset your device and will bring your device alive...
looking forward for your reply...
Click to expand...
Click to collapse
just want to help to straighten !!
i-Mate JAM hard reset
To perform a full reset
A full device reset clears memory, deletes all data and restores the Pocket PC Phone to its default settings. Programs installed at the factory remain, erasing all data that you have created and programs you have installed. Press and hold the power button, and then use the stylus to press the soft reset button at the same time. Be sure you have backed up all your data in a SD card or on your PC before performing a full reset.

Bricked s6 please Help!

Yesterday, I flashed the XtreStoLight addon package with Kernel. And now the phone does not start.
I don't have any roms or Backups on the s6.
PC does not connect and usb-sticks also not work.
It's an SM-g920F German without Sim Lock.
Can someone help me to make it working again?
Thank You!!!
What do you mean, by not starting up. It doesn't go trough SAMSUNG logo or it doesn't turn on at all
If it doesn't turn on at all, you must flashed faulty kernel, and your device is now a paperweight
Ragazzza said:
What do you mean, by not starting up. It doesn't go trough SAMSUNG logo or it doesn't turn on at all
If it doesn't turn on at all, you must flashed faulty kernel, and your device is now a paperweight
Click to expand...
Click to collapse
It doesn't show samsung logo but I can boot in recovery or download mode.
flash latest firmware 6.0.1 that have latest bootloader ? if pc can't recognize device reinstall samsung driver and after that turn off device and enter to download mode and odin can recognize your device if not try another usb hub or change cable
shiko2007 said:
flash latest firmware 6.0.1 that have latest bootloader ? if pc can't recognize device reinstall samsung driver and after that turn off device and enter to download mode and odin can recognize your device if not try another usb hub or change cable
Click to expand...
Click to collapse
That's also not working.
I used 3 usb-cables and all ports of two PC's
I also reinstalled the drivers.
if you can access to recovery try make full wipe (factory reset +wipe cash +wipe cash) also you try to enter to adb on recovery and try to connect device to pc and see if can recognize it or not
shiko2007 said:
if you can access to recovery try make full wipe (factory reset +wipe cash +wipe cash) also you try to enter to adb on recovery and try to connect device to pc and see if can recognize it or not
Click to expand...
Click to collapse
No that's also not working. The PC says theirs a Problem with the Device.
ok remove any drive of samsung, and reinstall again also install kies after that try again by turn off your device and stay 15 secound before turn on after turn on make full wipe again and restart and enter to download mode and try again if not work can you tell me what is your windows version? if windows 8 try windows 7
shiko2007 said:
ok remove any drive of samsung, and reinstall again also install kies after that try again by turn off your device and stay 15 secound before turn on after turn on make full wipe again and restart and enter to download mode and try again if not work can you tell me what is your windows version? if windows 8 try windows 7
Click to expand...
Click to collapse
This has not work. I have windows 10 and I can't install win 7.
Justinunderwood164 said:
This has not work. I have windows 10 and I can't install win 7.
Click to expand...
Click to collapse
I agree, try on win 7, why can't you install it?
Ragazzza said:
I agree, try on win 7, why can't you install it?
Click to expand...
Click to collapse
It isn't my PC. Have you any other Idea?
Justinunderwood164 said:
It isn't my PC. Have you any other Idea?
Click to expand...
Click to collapse
Only solution is odin man, would you rather be without your 500€ phone, or find a PC with a windows 7 installed. It isn't so hard man
yes bro , you must install windows 7 because of windows 10 you have can't reconigz your device
shiko2007 said:
yes bro , you must install windows 7 because of windows 10 you have can't reconigz your device
Click to expand...
Click to collapse
Tomorrow I can go to a friend he has a win 7 PC.
Thank you all for your help!
Justinunderwood164 said:
Tomorrow I can go to a friend he has a win 7 PC.
Thank you all for your help!
Click to expand...
Click to collapse
It still Not work.
Put your phone in Download Mode, open Samsung Kies, and go to Tools/Firmware Upgrade and Initialisation.
Enter your Model name (SM-G920x) and S/N
Let it do it's thing.
mildj84ns said:
Put your phone in Download Mode, open Samsung Kies, and go to Tools/Firmware Upgrade and Initialisation.
Enter your Model name (SM-G920x) and S/N
Let it do it's thing.
Click to expand...
Click to collapse
That isn't working
It says I have to connect my device but it is connected.
I believe you have corrupted bootloader area, try to keep forcing entering download mode, if still not working you will need motherboard replacement
Justinunderwood164 said:
That isn't working
It says I have to connect my device but it is connected.
Click to expand...
Click to collapse
If you are able to enter Download Mode, pay no attention to those messages from Kies, just do what i told you.
Connect your phone while in Download Mode and go to -Tools/Firmware Upgrade and Initialisation
God....
Install drivers first, they work on Windows 10. If it doesn't work, you have another problem somewhere we don't know.
Then, download SamFirm AND NOT UPDATO, launch the software then fill the boxes like you want (model, then region (means CSC)). CHECK BINARY NATURE
Once firmware is downloaded, you flash the 4 files firmware though Odin with Re-Partition and Nand Erase All ticked, and your phone will be alive again

Categories

Resources