Related
Hi Devs,
since the upgrade to Vista SP 2 I am not able to access my PC any more via remote desktop mobile.
Accessing it via my notebook works well both from LAN and WAN side.
But as soon as I try to access it via Remote Desktop Mobile on my touch HD or my TG01 I receive a connetion error and have no idea why.
I would be very happy if you could help me to find a solution for that due to I really like to boot my PC from anywhere in the world an access my sweet home desktop.
Thanks and with best Regards
die_Leuchte
*Bump*
die_Leuchte,
you figure this out yet? I finally upgraded to sp2(vista home pre) and I ran into the same thing. Got it working again on my xp laptop but dont really want to fire up wifi router to connect through rdp. It's driving me nuts, MS making things better once again!
Can anyone help bring rdp back to life after sp2?
I believe you have to change a system setting on the Vista PC to allow previous versions of RDP to connect. Don't remember where the setting is, but I'm pretty sure that is what it is.
Also Home versions do not support RDP hosting. Only Pro or business or higher.
Thanks Hannigan, I figured the same as well. FYI RDP does work on Vista home with a small hack, but not since sp2. There is an sp2 hack but it only allows my laptop(winXP) to connect and not my mobile. I need to find the setting on the vista pc which tells it to ignore the rdp version connecting to it. If someone could post this it would really help!!!
ok what I figured out so far is, that you need to configure the rdp host to allow clients which does not have Network Level Authenticationnetwork to connect as well. Due to I have Home Premuim with a rdp hack I do not have the menu to enable cientas without nla to connect and I did not find another solution so far (for example a reg key).
i found some info on the registry keys but I don't think I can just plug them in and get it working. I'll keep trying and post anything I find.
If you need to configure it to allow lower versions to connect, it's here.
nawat said:
If you need to configure it to allow lower versions to connect, it's here.
Click to expand...
Click to collapse
Thats exactly what is missing in Vista home premium
And thats why we search for another solution to allow any kind of clients to connect.
Hello guys,
i'm looking for a decent RDP client.
I have tried the WM6 RDP from finster869 but i can't connect to any server.
I have tried also the ms_rdp_v6.5.cab downloaded somewhere in this forum: this one works but once switched to full screen i loose the keyboard and i can't digit anything.
I don't understand why Toshiba has not delivered a such important app
It's ridiculous, I've tried finster but it just doesn't work. The only one that works for me is MochaVnc as the viewer on my phone and I use ultraVnc on my desktop as the server, but I think at the moment, I've only been able to get it running over wifi. If someone manages over 3G, please please let me know.
But I haven't got a clue why finster doesn't work. Wanted to try it out .
Tozzy2 said:
It's ridiculous, I've tried finster but it just doesn't work. The only one that works for me is MochaVnc as the viewer on my phone and I use ultraVnc on my desktop as the server, but I think at the moment, I've only been able to get it running over wifi. If someone manages over 3G, please please let me know.
But I haven't got a clue why finster doesn't work. Wanted to try it out .
Click to expand...
Click to collapse
If I'm not wrong, This kind of software only works in a intranet , so only WIFI is available as wireless connection (no 3G possibility)
I use VNC server (on PC as Mobile). If any interested I can link the apps.
the ms_rdp_v6.5.cab works on 3G too. The problem is that full screen mode hides the keyboard.
mom4751 said:
the ms_rdp_v6.5.cab works on 3G too. The problem is that full screen mode hides the keyboard.
Click to expand...
Click to collapse
Any steps to get it working?
It works on 3G to? Compared to what other software do you mean? I've tried the microsoft one and the finster, but just never connects, even in wifi mode. I find it completely useless. Maybe I'm doing something wrong?
I'm going to holiday in a few days so would love to get this working on 3G
I have tried the free RDP client zaDesktop 0.98b: same problem of Microsoft RDP.
It connects perfectly to the servers using the 3G/HSPA connection but when the application goes full-screen, the keyboard icon goes away.
have you tried Remote Touch? It is very simple ... you can try it with wlan very quick ... it just takes 5 minutes to download, installing and testing. If you want to control your PC via 3G you just need an no-ip Account for an DNS address.
xda_dev2063 said:
have you tried Remote Touch? It is very simple ... you can try it with wlan very quick ... it just takes 5 minutes to download, installing and testing. If you want to control your PC via 3G you just need an no-ip Account for an DNS address.
Click to expand...
Click to collapse
I cannot install 3rd party unauthorized services on the business servers. RDP is the official method to remote access the servers.
I have choose a Windows mobile device because of this; i could not image that RDP on TG01 was such a pain.
I can't correctly access a Microsoft server platform with a Microsoft OS phone and a Microsoft application and probabily i will have to use 3rd party software to resolve the problem. In fact, i am going to try RDM+: a commercial software, availiable for WM and many other platforms included Android and iphone.
What a big defeat for Microsoft (and Toshiba too).
RDP worked for me
For me RDP works without any problem. I use Nokser's newest build from 30.05.2010. I think it is a Version of Finster pre-installed.
Pere said:
If I'm not wrong, This kind of software only works in a intranet , so only WIFI is available as wireless connection (no 3G possibility)
I use VNC server (on PC as Mobile). If any interested I can link the apps.
Click to expand...
Click to collapse
i could use those links
warcaller said:
i could use those links
Click to expand...
Click to collapse
Here you are: VNC® Server Free Edition 4.1 for Windows
The ZIP is the VCN server,to be installed in your PC
The cab is the VCN viewer, to be installed in your TG01
On viewer, you have to write the IP and port in this way (example): Server: 192.168.1.11:5901
http://www.realvnc.com/products/free/4.1/winvnc.html
Enjoy
Hi peoples. I am in seach of the best remote pc app. I have currently tried:
Phonemypc: Which is currently my favorite remote pc app. Navigation is easy and it has a mouse function where you can slide your finger and see the mouse move. Frame rate isnt that great but it has the function to tap into the PC/Laptops camera and view from your mobile device, you can also tap into the mic and listen.
Splashtop HD: I also tried splashtop hd which is very laggy even on fast wifi. The image is alot more crisp, but its just very dificult to use. They claim 30+ fps but I couldnt get it to work that smoothly.
what is everyone else using to control their pcs?
Sent from my Transformer TF101 using Tapatalk
I've used splashtop with very little lag on good WiFi, and even decently on 3G. What's the upload speed on the wifi you are using your PC in?
PhoneMyPC does the job for my needs.
PhonemyPC on my phone, Teamviewer on my tablet.
Remote VNC
I am recommending Teamviewer.
HTML:
http://www.teamviewer.com
Of course on market is version for ANDROID.
I personally connect via VPN and then use the "2X" app to RDP to other servers.... With an external mouse, this combination works perfectly - just like you are sitting in front of a windows box. I use this mainly for support (I'm a unix admin by trade). Now, I never even need to open my laptop for after-hours support! By the time my laptop boots, I could have already got in and fixed the issue from my Transformer!
Wyse pocketcloud is absolutely amazing. I've been using it on my phone and tab for a long time now and never wanted to switch. Also free
Best I have used is Splashtop. I've used VNC, RAdmin, RDP, and X forwarding on various platforms and distances over the years and Splashtop has been the least laggy for me. I've been using the client included with my TF.
Sent from my Transformer TF101 using Tapatalk
Spashtop is nice, but the problem is that you need to install a client on the remote PC.... RDP is nice becuase it's automatically available on all windows systems... If you are only connecting to one PC, I guess that's not a big deal, but for professional use, it's just too much of a pain (and security issue) to install a spashtop client on a bunch of PC's....
I use the Xtralogic RDP client. It's an amazing RDP app that does absolutely everything. I've tried dozens of different RDP apps and Xtralogic beats everything I've tried hands-down. It's a steep price on the market, but I found it for next-to-nothing on a third party app site.
jtrosky said:
Spashtop is nice, but the problem is that you need to install a client on the remote PC.... RDP is nice becuase it's automatically available on all windows systems... If you are only connecting to one PC, I guess that's not a big deal, but for professional use, it's just too much of a pain (and security issue) to install a spashtop client on a bunch of PC's....
Click to expand...
Click to collapse
One of many reasons I use SSH unless I have to interact with a GUI.
Sent from my Transformer TF101 using Tapatalk
Spidey01 said:
One of many reasons I use SSH unless I have to interact with a GUI.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Absolutely - I too use SSH for chararacter-based systems... But for Windows, the X2 app (which is free) is an excellent RDP app....
I use VMWare View. It requires you to have two windows server 2008 installations to do so(one as domain controller, and one in the domain).
chatch15117 said:
I use VMWare View. It requires you to have two windows server 2008 installations to do so(one as domain controller, and one in the domain).
Click to expand...
Click to collapse
What are the advantages of VMWare VIew - I've head of it, but don't know much about it - does it only work with VMWare, I'm assuming?
Thanks.
I create an SSH tunnel then connect using Xtralogic.
2x and PocketCloud Remote Desktop using VPN
I´m using 2X or PocketCloud Remote, which are working both flawlessly to connect to my Win 7 Desktop (when FW is disabled, eventhough exception for TCP 3389 is konfigured), using WLAN.
I´d like to use the apps, when i´m home by VPN (like jtrosky) but in this case, traffic from PocketCloud isn´t even arriving at my ethernet port, whereas traffic from 2X does, but the connection doesn´t establish.
Tracing on the Ethernetport on my PC with Wireshark, i see a TCP SYN-packet comming in from my Transformer, followed by a TCP connection reset-packet (RST ACK) from my PC, where there sould be SYN ACK-Packet. So the TCP 3-way-handshake doesn´t work out.
FW and other security stuff is disabled. Access to my NAS is no problem, so VPN should be the root of evil.
Anybody any ideas?
pcap-dumps attached.
THANKS!
For what it's worth, I'm going to change my RDP-app recommendation from 2X to Jump Desktop... I didn't think you could get any better than 2X (it is a great app), but Jump Desktop is even better! I *love* the fact that I can basically RDP to my remote server without even connecting to my VPN at all! It allows you to connect via the internet - as long as you load a "helper" app on the PC(s) that you want to connect to.
Works GREAT - it is now my go to app for remote connectivity!
Sent from my Transformer TF101 using Tapatalk 2
Thank you for your "real-time"-reply
It allows you to connect via the internet - as long as you load a "helper" app on the PC(s) that you want to connect to.
Click to expand...
Click to collapse
That means, that you open a port on your router / FW, like using DYNDNS, right?
I like the idea, VPNing home and connecting to my PC from inside my LAN, - just feels more secure.
Greetings
lj1977 said:
Thank you for your "real-time"-reply
That means, that you open a port on your router / FW, like using DYNDNS, right?
I like the idea, VPNing home and connecting to my PC from inside my LAN, - just feels more secure.
Greetings
Click to expand...
Click to collapse
Actually, that's the nice part - with Jump Desktop, you don't need to worry about any of that stuff - you just log in to your Google account (from inside the PC helper app) and then everything is automatic! No need to mess with port forwarding, DynDNS or anything like that - it's all automatic...
They have a free version - give it a shot - I think you'll like it!
Of course, you can always still connect to your VPN and use Jump Desktop to connect "directly" to your PC if you want to go that route. But, the option to be able to connect without VPN is a nice-to-have in case VPN access is down or something like that....
Sent from my Transformer TF101 using Tapatalk 2
The app I would like to present is called X-Link and is intended to make file transfers between devices (Android or PC) easy.
It's using multicasts to find other clients within the same WiFi network.
So no setup ist needed.
In addition to the Android app there is also a Java based PC client available.
This client has been tested on Linux and Windows but might work on other configurations.
The full description and a short video can be found on the Android Market page:
https://market.android.com/details?id=de.fun2code.android.xlink
You can not only transfer files between PC and Android but also between Android devices.
This is beta software, so there are still bugs.
Please report them in this thread. I'll have a look as soon as I find time and will contact some of you to get things fixed.
There are surely some timing (and timeout) problems which need some attention.
Make sure your router supports multicasts.
Please post comments, I'll try to read them all
Link to PC client
http://www.fun2code.de/downloads/xlink/XLinkClient.jar
Copying of directories
Supported since 0.8.4 beta.
Testing and how you can help
Multicast test
To test if your network is able to deal with multicast messages you can do the following test:
1. Download the file MulticastSender.jar and MulticastReceiver.jar.
2. On one PC start the MulticastSender.jar and on another the MulticastReceiver.jar.
The sender sends screenshots. If you see the screenshots on the receiver's side, multicasts are working for you.
If not, X-Link will not work.
If this works but X-Link doesn't it's likely that there is a problem concerning timeouts within X-Link.
In this case, please send me a mail (xlink [at] fun2code.de).
If sharing on Android does not work
Sharing does not seem to be working in some apps.
If you encounter such a problem, please download the app XLinkDebug.apk and install it.
Use sharing as you normally would with X-Link but select X-Link Debug instead.
On execution the app will copy the information needed for me to fix the issue to the clipboard.
Please paste the clipboard into a mail ans send it to the following address: xlink [at] fun2code.de
installed both the client and app on my Nexus One (CM7)
PC client doesnot detect my Mobile.
firoz3321 said:
installed both the client and app on my Nexus One (CM7)
PC client doesnot detect my Mobile.
Click to expand...
Click to collapse
Was your phone on a WiFi network?
obviously, yes it is
The devices have to be connected to the same WiFi network and the network has to support multicasts (which usually should be the case).
If you are on a weak WiFi signal it might take more than one try to find other devices.
My test devices are:
Galaxy Nexus, Nexus One and Notion Ink Adam
i really do not have knowledge about the Multicast thing, but my Wifi Signal is good. And i used SAMBA and other wifi file sharing apps and they all worked using the same wifi.
And clicked RELOAD many times but i cant see any device in the popdown menu..
Hm ... so this seems not to work on your network
Multicast is different from TCP connections, so this can't be compared.
Wow, it actually worked in HTC Desire!! Great app!! Now I can transfer files w/o any cables!! Need sometime to allow 2 devices to connect though..
Sent from my HTC Desire using XDA App
I don't know anything about Multicast, but my Mac is on the same Wifi network as my Galaxy Nexus, and the Mac couldn't see the Nexus. I tried "Reload" several times.
Works on Windows 7 64-bit and a Galaxy Nexus. Cool app, really like it!
My only suggestions would either be to get rid of the menu and put it all in the "drag file here" area, or maybe some slightly simpler graphics. They come off a little cheesy.
Other than that, it works well.
Next steps would be to keep app closed, but still have access to dropping files. Root access? I'm not sure how it would work.
App and client work seamlessly with windows 7 and tmo sgsII.
Only thing I notice is inability to share pics directly from my phone's gallery. I use my file explorer and it works fine.
Amazing work. Coffee money on the way
So this is like airdroid but rather than the file browser/tools being built into the web address there's a desktop client?
https://market.android.com/details?...t=W251bGwsMSwxLDEsImNvbS5zYW5kLmFpcmRyb2lkIl0.
Hello There,
Using Windows8, DHD and TF101. My PC had no problem seeing the items on my network Alas, every time I tried to swap a file over I just kept getting a pop message telling me there was an upload error. Thanks.
Pity because it was something I had been looking for :-(
Worked perfectly on Macbook running Lion and galaxy nexus
awesome app!
amazing app and super simple to use/set up, great stuff dude =D
dodge3003 said:
Hello There,
Using Windows8, DHD and TF101. My PC had no problem seeing the items on my network Alas, every time I tried to swap a file over I just kept getting a pop message telling me there was an upload error. Thanks.
Pity because it was something I had been looking for :-(
Click to expand...
Click to collapse
Make sure you have x-link at the front of your screen (on your phone) seems it disappears after being inactive and you'll get the upload error problem. I am of course speaking from experience as I just fought with that, bringing x-link back to the front seemed to solve it.
Thanks to all of you for testing!
The X-Link app has to be active on the Android device to be visible to others and for the transfer to work.
If you close the app during data transfer, the transfer will break.
I'm glad that it worked for some of you. I'll do some debugging next week.
Hope things will improve...
For does of you having problems seeing other devices.
You can do the following test.
Run the PC client from console: java -jar XLinkClient.jar
Then try to detect you PC from the Android device.
You should see an output similar to this on the console:
Connecting: 192.168.0.198/4500
If an Exception occurs there was a problem when connecting back to the Android device.
If no output is visible, it's likely that multicasts are not working within your network.
Might help newer users who want to try out your app if you put a download link on your web site or here in this thread. I found your app through xda article and didn't realize that I had to type the link out verbatim with 'XLinkClient.jar' having correct capitalization lol. Took me a minute to figure out, so newer people might just give up without trying it. Just fyi ;-)
Great app, thanks for your work! Working on Mac running Lion and Droid 3.
Working great on Windows 8 Consumer preview and LG Optimus 2X. If i had a job right now, i would send you money for a beer, but i dont have a job at the moment, so a cant. Thanks.
Ok! I keep hoping I'll see some neat way to get my desktop apps on my Surface on here! However, I found a pretty cool solution myself!
First I set up remote desktop with my windows 7 PC and my surface. That was cool. It felt clunky and slow. However, I looked up how to do RemoteApps. I thought it looked complicated but worth it. While stumbling around I found a utility that basically sets it up for you!
1. First setup remote desktop access and free the port for remote desktop. I will not describe it here.
2. I used this utility! Kim Knight's remoteapp tool. Google it. XDA won't let me post a link cause I've never posted before. I just wanted to share my findings.
3. I now can use Utorrent, Photoshop and even my silly Pidgin! Eventually I'm going to use Maya! It works great with hardly any lag! The only lag I get is when I'm saving to my tablet vs the remote computer. I haven't been able to get a browser to work yet but I have invested that much time into it. I'm sure other people will figure it out. Whats cool is Utorrent will save to my tablet. Yah download speeds are slower but expected!
Nice find
This is indeed a great find! I've played with RemoteApps before on the server editions of Windows, but it's quite tricky to get it to work with one server and not a huge enterprise! Being able to use it in this way is just great. Plus we can probably work out an XML file that will populate the apps into the RemoteApp control panel / metro RDP client automatically.
However, I'm having a problem with this on Win 8 (as a host). It seems to all setup ok, but upon connecting (from Win8 or Surface RT) after credentials, cert etc are accepted the RDP client just vanishes. I see Kim Knight's page says it works with Win 8 CP - has anyone tested it with Win 8 RTM? If MS have broken this with Win8 I think I'll have to setup a Win7 box/VM just for this purpose!
I had issues getting it working on Windows 7 pro at work, so i swapped up to Enterprise and it worked great. I haven't tested it at home yet off my system. I haven't used this but for my home fileserver, but you can take it a step further and patch RDP to work for multiple concurrent connections.
http://www.redmondpie.com/remote-de...-easy-way-with-this-native-windows-rdp-patch/
RemoteApp Tool requires:
•
Microsoft .Net Framework 3.5
•
Remote Desktop 7 enabled on host
•
Remote Desktop 7 client on client
•
Windows 7 Enterprise or Ultimate (or Vista Pro or XPproSP3 - untested)
Eirikr88 said:
I had issues getting it working on Windows 7 pro at work, so i swapped up to Enterprise and it worked great. I haven't tested it at home yet off my system. I haven't used this but for my home fileserver, but you can take it a step further and patch RDP to work for multiple concurrent connections.
http://www.redmondpie.com/remote-de...-easy-way-with-this-native-windows-rdp-patch/
Click to expand...
Click to collapse
With concurrent connections, can you remote app and use desktop still with same login?
Edit: Tried it myself and it works. So now I can remote app in while I'm still logged in my desktop and it won't boot me off, allowing me to use them simultaneously with the same login.
I can confirm this works with Windows 8 Enterprise, but not Pro. There is, of course, no Ultimate. This is all a bit of a shame as I can't use RemoteApp on my primary home PC, which also runs Media Centre (which can't be added into W8 Enterprise).
yokuyuki said:
With concurrent connections, can you remote app and use desktop still with same login?
Edit: Tried it myself and it works. So now I can remote app in while I'm still logged in my desktop and it won't boot me off, allowing me to use them simultaneously with the same login.
Click to expand...
Click to collapse
Mine keeps booting me off... Asks me to sign out the other user before logging in. Any tips on how you were able to achieve that?
Mandy
mandy3d said:
Mine keeps booting me off... Asks me to sign out the other user before logging in. Any tips on how you were able to achieve that?
Mandy
Click to expand...
Click to collapse
Did you install the concurrent RDP patch?
I installed it on Windows 7 Ultimate and I can use remote apps on my Surface and use desktop at the same time.
Guilde posted for remote apps on Windows 8 ENT
I have a post up on how to get this working on Window 8.
http://mattalter.wordpress.com/2012/11/09/how-to-enable-remote-apps-in-windows-8-and-windows-rt/
Thanks
Matt
Brilliant. Worked like a charm. No idea how, without a server running the remote app role, but it does.
Sent from my HTC One X using Tapatalk 2
mattalter said:
I have a post up on how to get this working on Window 8.
Thanks
Matt
Click to expand...
Click to collapse
Does it work with a win 8 pro instead of an entreprise edition ?
No
Sent from my HTC One X using Tapatalk 2
landwomble said:
Brilliant. Worked like a charm. No idea how, without a server running the remote app role, but it does.
Click to expand...
Click to collapse
RemoteApp is just a remote desktop connection to a specific application, it's been around since Windows XP SP3. It's also how XP mode in Windows 7 does its magic.
I know what remote desktop is! But remoteapp - seamless windowed app on client - is pretty impressive.
Sent from my HTC One X using Tapatalk 2
The remote app program does work under Windows 8, but you need to run it as administrator otherwise it's crashtastic.
After that it works perfectly.
One other thing is that you should apply the patch to allow multiple co-current remote desktop sessions to work on your machine, here's the patch... http://www.tenniswood.co.uk/technol...current-remote-desktop-sessions-in-windows-8/
That's not legal.
Sent from my HTC Desire using Tapatalk 2
i would love to get this working on windows 8 pro. does anyone know of a way to get it working?
remote desktop help
Hey all, if anyone can help me get remote desktop working on my surface it would be greatly appreciated. If a developer out there could set up an app to get this done easier, could be a moneymaker, I know id pay for it.
After scouring youtube, and the web, I found a lot of different walkthroughs on how to set up a home pc as a remote server. Unfortunately, I really don't know what im doing and cant figure out why it isn't working. Im running WinXP Pro SP3 on a few year old laptop (I bought the thing during the Vista debacle, and down graded to xp for software reasons - I am an architect and needed my AutoCAD and various graphic intensive programs)
These are the steps that I have tried, all to no avail
- I go to control panel, System, Remote, turn on Remote Desktop.
- open Linksys router configuration, and try to set up Port Forwarding
- this is where it really gets confusing for me, and I don't think that I am doing it correct. I know I need to open the port, I go to Applications and Gaming, and enter RDP, Im not sure of the port number, and what else to do here
- cmd, ipconfig - I enter all information - ip address, DNS, Gateway, etc?
I then found out that in order to really get this working, I needed a static IP address - Im not sure how to do this, but I found a couple posts, and a youtube video suggesting using DynDNS to get this working as a host. I signed up, and am still not able to connect.
Any help would be appreciated - Im not great with this stuff.....I never really played with networking, before....Please help me get my Surface working. Its possible im not entering the address correctly in the Surface Remote Desktop App.
Thank You!!
If the surface is on your home wifi, it should be able to rdp (remote desktop) to the XP system no problem.
Only need the router ip mapping / translation if using the Surface outside the house on another Internet connection