Related
I am sorry to say, but I am not happy with my new phone !
Some serious problems with it.
1. sometimes when I push the powerbutton nothing hapens, and actualy I can see the phone is fuctioning (round button is flashing for new mail). After a few seconds I get the "famous" grey screen. Reboot is the only option.
2. sometimes I wake up and the phone has boot (I guess) somewhere in the night, because I have to give my accescode for the sim.
3. the "broken glass" isue is a problem and happens twice now
Think these are not small problems for a "Pro" phone.
Right now I don't have a riable and solid phone, and I think a pro phone should be that way .
Hope this things are fixed soon.
I wonder if this is a difference in roms or if you should return your touch pro. I've beating the hell out of my phone software wise to see how it will run and i haven't had a single problem yet. I haven't been charging it via the wall charger so maybe that has something to do with it but i doubt it.
Send it back! At least try that once, if you get the same problem again then either you are very unlucky, or there is a problem with all batches. I haven't had either of those problems once and got the phone the day it came out.
I only see one or two people complaining about these issues.
Steve
steveoidm said:
Send it back! At least try that once, if you get the same problem again then either you are very unlucky, or there is a problem with all batches. I haven't had either of those problems once and got the phone the day it came out.
I only see one or two people complaining about these issues.
Steve
Click to expand...
Click to collapse
I am thinking about it, to send it back. But I still hope it is a rom problem, like Bxsteeze said. Flashing another rom could help. Soon that is possible I will try.
If it doesn't help I send it back.(forgive my my English )
TBH i would do it the other way around. If flashing the ROM doesn't help because of a hardware fault and you have flashed another ROM, chances are you may not get the replacement you want.
especially as Olinex haven't finished the SPL Downgrader yet.....
DONT send it back ffs!!
We have just got HardSPL for the thing so you can actually try any ROM you wish, surely its worth the little hassle trying that first?!
I had the same "broken glass" like screen issue only once also when sitting overnight, but it wasn´t charging at all.
I have several other issue´s but it think it´s ROM related, and if it´s not i´m gonna send mine back aswel.
I've had issues 2 and 3 happen to me.
A couple of times now when trying to wake the device from an overnight charge in the morning I get no response, device locked. Soft reset and all is well.
Regarding the broken glass thing, that's definitely a software issue. Its TF3D having a spaz. If you disable it and then re-enable it, all is well.
Check out the issues thread here:
http://forum.xda-developers.com/showthread.php?t=418150
and here:
http://forum.xda-developers.com/showthread.php?t=420700
Hey if anyone doesn't want their Raphael. You could give it to me.
hardSPL ? Let the party begin
Problems
Hi,
Four problems i found so far.
First the broken glass effect. When the phone is ringing and i turn it on his screen the ringing stops and the 3dflo breaks. Or the screen turns grey.
Problem 2 After it restarts i get an device.exe issue.
Problem 3 volume of normal calling is very low. In a noisy room it is hard to understand the caller.
Problem 4 During a call several hick-ups. Also when the signal strength is max.
For know. It is a nice smartphone but some things need improvement.
Can I remind people there is an issues thread here:
http://forum.xda-developers.com/showthread.php?t=418150
I know a couple of pages got a bit OT about touch sensitive buttons etc but its back on track now. Log your issues in there guys so we can try and help each other better.
Syphon Filter said:
Can I remind people there is an issues thread here:
http://forum.xda-developers.com/showthread.php?t=418150
I know a couple of pages got a bit OT about touch sensitive buttons etc but its back on track now. Log your issues in there guys so we can try and help each other better.
Click to expand...
Click to collapse
And dont forget to add the info to the wiki.
My Touch Pro has had the 'wake up' problem (either refuses to without soft reset or shows me frizzed up screen), has frozen on me during basic setup (following a hard reset) and has given me several spontaneous resets.
It also keeps forgetting my wi-fi network exists.
I feel safe in saying that I have a faulty one, so I'm asking for a replacement.
Hi guys,
I have HTC Touch GSM P3452, its touch screen not working for a last one week.I had did soft reset and Hard reset but no use.
I had read the Alignment problem fix thread but i can edit the registry in my phone using mobile registry editor(write access denied message, i had got).
how to make my touch screen work.Help me out soon...
negaboys said:
Hi guys,
I have HTC Touch GSM P3452, its touch screen not working for a last one week.I had did soft reset and Hard reset but no use.
I had read the Alignment problem fix thread but i can edit the registry in my phone using mobile registry editor(write access denied message, i had got).
how to make my touch screen work.Help me out soon...
Click to expand...
Click to collapse
If it is defect, you can replace your touchscreen for low costs. I paid 20 euro's for my new touchscreen. You also need an T6 torx to open your mobile.
negaboys said:
Hi guys,
I have HTC Touch GSM P3452, its touch screen not working for a last one week.I had did soft reset and Hard reset but no use.
I had read the Alignment problem fix thread but i can edit the registry in my phone using mobile registry editor(write access denied message, i had got).
how to make my touch screen work.Help me out soon...
Click to expand...
Click to collapse
Get a new digitizer on eBay, fairly cheap and easy to replace. Can get one to match your housing color. Less than 20 Euro for sure.
thanks for reply back soon..
there is no way to recover my touch screen??
any technical way to recover my touch screen, techies help me out...
I don't seem how you could 'repair' it. I think it is broken or not. Or the connecter is not in the right position. If so you must open up your mobile either way. I think it's best to just replace the touchscreen it also removes the scratches if you have those. And it's very cheap.
thanks cywood.. its not broken, just it stops working..
negaboys , the same thing just happened to me too. I run the tweaking applications here - doing the HD Tweak and Kaz TD2 instructions only. Then rebooted my AT&T Tilt. After the Titl started, the touch screen no longer worked. And when I went into the utilities to undo the changes I had made, but the applications require a touch for you to use them.
I am really stuck.
digitizer
i thinks it is less effort and much easier to replace the touch screen. its called digitizer. if u r in india ull get it for rs300/-. changing it is extremely easy, just google and search for videos on htc screen replacement. it took me just 45 minutes to open my htc and change the screen.
jagooch said:
negaboys , the same thing just happened to me too. I run the tweaking applications here - doing the HD Tweak and Kaz TD2 instructions only. Then rebooted my AT&T Tilt. After the Titl started, the touch screen no longer worked. And when I went into the utilities to undo the changes I had made, but the applications require a touch for you to use them.
I am really stuck.
Click to expand...
Click to collapse
in your case, it will probably be fixed with a hard-reset.
jagooch said:
negaboys , the same thing just happened to me too. I run the tweaking applications here - doing the HD Tweak and Kaz TD2 instructions only. Then rebooted my AT&T Tilt. After the Titl started, the touch screen no longer worked. And when I went into the utilities to undo the changes I had made, but the applications require a touch for you to use them.
I am really stuck.
Click to expand...
Click to collapse
use mymobiler using that u can control ur mobile thru ur computer google for it
praveen_y76 said:
i thinks it is less effort and much easier to replace the touch screen. its called digitizer. if u r in india ull get it for rs300/-. changing it is extremely easy, just google and search for videos on htc screen replacement. it took me just 45 minutes to open my htc and change the screen.
Click to expand...
Click to collapse
Hi Praveen,
from where u got the digitizer...? was it original?
mine also stopped working two days back. I am in chennai and just heard that HTC has opened a new service centre here so maybe i can try out my luck there.
negaboys said:
i recovered my touch screen..
i have wrote here http://www.negablog.co.cc about how i recovered my touch screen without replacing digitizer.
Click to expand...
Click to collapse
could you please give the exact link where you have mentioned about it?
Thanks
crapula512 said:
in your case, it will probably be fixed with a hard-reset.
Click to expand...
Click to collapse
The hard reset fixed my problem. I also had corrupt files on my microSD card, so I formatted it as well.
Its amazing how many problems that look like hardware issues are actually software/file system issues.
For those who jumped right to "replace the screen" as a solution, I believe you need to rethink your troubleshooting strategy, as you'll convince people to spend time and money performing a fix action that doesn't work.
mohitsapru said:
use mymobiler using that u can control ur mobile thru ur computer google for it
Click to expand...
Click to collapse
That is a great program! I've heard of it before, but never thought I would need it. It looks useful for getting screen shots from your mobile device as well.
Thanks!
repeated screen alignment problm
hi guys,
a month back my elfin screen stopped responding,after searching threads,i foundout that the digitizer was dead so i replaced it .touch response came back,but now every few mins i have to align the screen to have proper response.i m using onyx6.5 /mikys/ahen roms of latest build.and lower part of screen was not responding for touch some times,so to align screen was not possible as start button was in lower part in newer builds,so im starting roms of older builds in them start button is at top,where i came somehow reach screen alignment page.i m not able to find what is wrong wth my device??whether the digitizer was not working properly???
is there anyone who faced similar problm??any one there to help me out????
cant able to bypass alignment screen?
go here http://www.negablog.co.cc i had wrote about how to bypass the screen alignment screen,
change a new screen
Solution
Okay, I've just had this problem with an HTC Touch, and I think this works with any HTC that has a "digitizer" rather than an all-in-one touchscreen (I think newer phones have digitisers).
I'm not sure if this will always work, but I've just done it - sometimes the inactive touch screen is "broken" because the layers are stuck together (so the phone can't tell where the touch is, hence unresponsive). With mine, I looked at the screen side on and could see a kind of "oily" patch in the light.
The solution is to get masking/gaffa tape - the very sticky brown one. Stick it down on the screen/digitizer and then keep pulling it off - this pulls the layers from each other. I kept repeating this lots before it worked - and in the end I pulled the top layer completely off (I think you should pull from the top of the phone, as the layers need to be attached at the bottom of the screen/digitizer). Once it pulled away, I gently lay it back down (after panicking!!) and hey presto it started working again.
Good luck!
Hello everyone,
Today i installed my parrot bluetooth carkit. And after i connected a couple of times my phone became unstable.
So unstable that i'm not able to tap the screen.....
I don't know what happened due that i have hard resetted the phone a couple of times and even switched from m-rom to energyrom 3.0 with the same results.
Only one thing that was strange is that the touch pro start up screen with the red characters in the right bottom.
That after i flashed m-rom to energy rom that the touch pro characters in the middle were still different like the way that are made in m-rom. With the addition : powered by m-rom
So this means that the phone doesnt format his core
Help please give me any advice.
UPDATE:When backlight is dimmed, it will be bright if i touch it once. Afterwards it will maintain the same.
I have tried several roms and tried to restore my SPL aswell, without any results till now.
I'm getting desperate now. Due that i stays in the screen of ALLIGNMENT, so i'm really not able to start up anything from now.
Have you dropped your device recently?
Try flashing a stock/shipped rom and hard-reset when after flashing the rom when you get to the "Tap here to set up your device" screen.
I have a OIL spot in the screen when i keep it in bright light.
This could be occured when the phone was inside my bag during my beach visit.....
I guess the phone turned liquid by the sun....
Does somebody ever experienced the same issue?
fone_fanatic said:
Have you dropped your device recently?
Try flashing a stock/shipped rom and hard-reset when after flashing the rom when you get to the "Tap here to set up your device" screen.
Click to expand...
Click to collapse
I have a oil spot, and the raster of the phone with little dots in visible in the ligt.
I have made a repair order at HTC.
Which didn't satisfy me at all!
They told me that it is not covered by warranty. I was shocked, this will cost me around 70 euro to fix, and my shop warranty is still valid. So i called the shop to explain this.
And they said if this is not caused by a user, we will change the phone, but first we what to have a diagnose from HTC.
So i decided to let HTC pick up my phone . They will have a repair time of 5 up till 10 days.
That's fair, but i'm not really happy with this situation. Because i think that the screen is the most harmful component. And this means that if this part fails that my phone becomes obsolete.
I will post my conclusion after i got my phone repaired.
I will return to the STOCK spl and the original rom just for warranty purposes.
dont tell them that you spilt anything on it or dropped it. Although they will be able to tell if there is water damage to the device you might get lucky and they won't notice.
Now is the oil spot from leaving it in the sun or suntan lotion getting in the device?
fone_fanatic said:
dont tell them that you spilt anything on it or dropped it. Although they will be able to tell if there is water damage to the device you might get lucky and they won't notice.
Now is the oil spot from leaving it in the sun or suntan lotion getting in the device?
Click to expand...
Click to collapse
Nope nothing happened at all.
Thats the strange thing about this situation.
I was in the shadow of the sun and the bags were only filled with clothes. So it didn't drop or something else.
I was able to use my phone during the day.... and was getting more unresponsive during the time that went by.
So i will not accept any blame of myself, due that i have a warranty of 1 year from the factory which will not cover your display :S
But also have the store warranty... So i told the store that i will return the phone if there are any costs.
The store told me that they will wait on the diagnose of HTC which i have sent it to myself to reduce the time.
If the diagnose tells that it's not my fault, then i can return my phone probably.... He couldn't promise it due that i want to see the diagnose first.
So I will wait on HTC's conclusion.... And i'm afraid that they will try to blame me for it....
They better not I will be a pain in there arses
Hello, I have exactly the same problem. After flashing from energyrom 3.0 to Aurora, a few hours later, i couldn't get my phone out of lock. (slide a button to the right or left on your touchscreen)
I tried a soft reset, but the phone started up with the same locked screen. So, i tried a hard reset. From that moment on i got stuck at "align screen". I ve flashed several times with several ROM's but nothing. (by the way, whatever rom i install, the first screen always says: Energyrom by NTGZ28)
I used the trick to paste welcome.not on the micro card, to bypass the align screen. That works, but the touch screen doesn't work. I 've removed the protection of the screen, but that doesn't make a difference either. My device didn't fall, came into contact with water or anything that could harm the thing. Oh, when the backlight is dimmed, the screen reacts to tapping it. Please help me out ??
resolt the issue. Because of a lot scraches (spelled ok?), i removed the protective screen. When i put the new screen on, everything worked !
hivesnl said:
I have a OIL spot
Click to expand...
Click to collapse
i had does as well and then touch screen stopped working..
had to replace digitizer, unfortunately had to replace LCD screen and digitizer at the end (was not able to separate digitizer from LCD)
I just wanted to share this, since I was able to replicate this issue with three different phones, also asking if other people are having the same issue.
I am using my Samsung Nexus S for three days.
I noticed that the back button (the first capacitive button on the bottom left) appears to have an hardware problem.
Basically normally it works fine, I mean when I'm not using the phone for some hours.
Then if I start to use the phone, after a moderate use (example installing applications from the market, browsing etc) the button gets less and less sensitive.
After some minutes it gets really annoying.
To make it work it is necessary to use a really stronger pressure with the finger, and it is not even always working!
I am planning to return my device, but today talking with some people/colleagues I discovered that two of them have exactly the same problem.
I'm suspecting there is a batch of Nexus S phones with this glitch, I am curious to know how many people have the same problem.
Note:
At first I thought it was a general issue of the capacitive buttons. But I can't replicate the same problem with the other three buttons, they work very smoothly just lighltly skimming the finger over them, even after long usage.
Anyone with the same problem? What is your experience with this button after some usage?
Cheers
I want to say that I noticed something similar the other day, but it was short-lived, and I'm not 100% sure. It wasn't long enough or bad enough to make me think the phone is defective, but I'm a bit used to funky capacitive button responses from my N1 days.
I can't reproduce the issue right now, though. How much usage are you talking about needing to duplicate?
Does your phone get hot, or feel hotter than normal when this happens?
I'd see if there's some particular pattern or software that seems to trigger it if you're interested in trouble-shooting.
The problem goes away when I don't touch the phone for a while (it seems that 1 hour is enough to reset the problem).
It seems "recharging".
Then with normal usage, nothing in particular, just even browsing in the settings/maps/market/browser etc., in few minutes the problem appears. The button definitely loses his "power".
It's very annoying, and my friends confirmed the same behavior.
EDIT:
Forgot to sat that the phone is not getting hotter, everything else is really normal.
Cheers
Mine definitely can be used for much more than a few minutes without the problem you're describing appearing.
I'd take it back. Factory reset the phone to protect your private data before taking it back. After the factory reset, you might want to test the behavior again, if it went away, the phone's not defective, you just had some software glitch.
Reminder, factory reset erases everything on the phone, so if you do it as troubleshooting step, be prepared to have to set the phone up from scratch again...I'm sure you knew this, but just covering my butt in case you didn't. It's a good trouble shooting step no matter what if you don't mind the hassle of re-setting things up.
I have a similar experience with the back button. Not sure what to think yet.
Sent from my Nexus S using XDA App
I had a similar problem when I had the Vibrant. Just exchanged it and luckily I got a better one without any problems. I did find out though if you are using the screen protector that came with the phone, it can cause this type of problem.
No problem, I will try everything tomorrow. This is not my primary phone (still loving my rooted Nexus One with CyanogenMod 6.1.1 ;-) I can't renounce to the colored trackball for the different notifications), but just a "dev" phone for testing purposes.
michele72 said:
No problem, I will try everything tomorrow. This is not my primary phone (still loving my rooted Nexus One with CyanogenMod 6.1.1 ;-) I can't renounce to the colored trackball for the different notifications), but just a "dev" phone for testing purposes.
Click to expand...
Click to collapse
The app NOLED from the Market may interest you if you can't live without trackball style color notifications. Seems to work fine when I tested it.
distortedloop said:
The app NOLED from the Market may interest you if you can't live without trackball style color notifications. Seems to work fine when I tested it.
Click to expand...
Click to collapse
Thank you, giving it a try.
Anyway, today I factory-reset my telephone and the problem of the back button is still there. I am returning the device.
Back button non responsive
Hi,
I just got my new nexus S (about an hour ago) that I was really excited about and am faced with a problem with the back button too.
Its got factory settings, so it cannot be a downloaded software issue. Also, I have not yet charged the battery at all, its still running on the same battery power that it shipped with.
The other buttons at the bottom of the phone (home, menu and search) all respond fine, its only the back button that does not seem to work. After going through this thread, I tried long-pressing the button, hard-pressing it, pressing just above it, below it, etc. It just wont respond. I had removed the screen protector it shipped with, so that cannot be the issue either.
If this is a known hardware problem (i.e. others have faced it too), irrespective of whether it is acknowledged by Samsung / Google, I'll return the handset. I do not want to spend a fortune and be landed with a handset that does not work - forget working as desired, but it does not seem to be working as designed !
Thanks & Regards,
Rohan
Yep. Definitely a problem here with the back button. There's also two other threads here about it.
I'm having similar problems. I have to touch the button just right for it to work properly
Sent from my Nexus S using XDA App
I was experiencing the same thing with my Nexus S, wasn't sure if it was the case I was using! Took of case and still had problem. I eventually returned mine cause it seemed like it was getting worse! I have a new one worth no problems, definitely a hardware problem! Return it!
Sent from my Nexus S using XDA App
michele72 said:
I just wanted to share this, since I was able to replicate this issue with three different phones, also asking if other people are having the same issue.
I am using my Samsung Nexus S for three days.
I noticed that the back button (the first capacitive button on the bottom left) appears to have an hardware problem.
Basically normally it works fine, I mean when I'm not using the phone for some hours.
Then if I start to use the phone, after a moderate use (example installing applications from the market, browsing etc) the button gets less and less sensitive.
After some minutes it gets really annoying.
To make it work it is necessary to use a really stronger pressure with the finger, and it is not even always working!
I am planning to return my device, but today talking with some people/colleagues I discovered that two of them have exactly the same problem.
I'm suspecting there is a batch of Nexus S phones with this glitch, I am curious to know how many people have the same problem.
Note:
At first I thought it was a general issue of the capacitive buttons. But I can't replicate the same problem with the other three buttons, they work very smoothly just lighltly skimming the finger over them, even after long usage.
Anyone with the same problem? What is your experience with this button after some usage?
Cheers
Click to expand...
Click to collapse
those buttons work over the heat of your finger. thats why after use it doesnt get as responsive. its because the screen is also heated and the heat of the screen is effecting the buttons. thats why you need harder pressure for the phone to understand this is your finger.
same issue was with Nexus 1. less responsive buttons. thats why there is a bigger gap between the buttons and the screen for galaxy S phones. i dont know why they did such a thing again with the nexus S. its like samsung didnt learn from anything from HTCs mistake.
They work with capacitance, not heat. Hence it being called a capacitive screen with capacitive buttons.
I think this is true ...
I have an HTC Desire with AMOLED screen.
When I play a finger intensive game, like "SkyForce Reloaded", after some times, the touch is not registered.
Then I must stop for a while, or change finger
Try that, you will know what I meant.
But, I don't have issue with the back button on HTC Desire because it is a hardware button. I am just trying to explain about loosing touch registration because finger interaction on (s)amoled screen.
PS: SkyForce Reloaded is an old school shot'em up game where you control a little space ship with your finger, shooting enemies.
ll_l_x_l_ll said:
those buttons work over the heat of your finger. thats why after use it doesnt get as responsive. its because the screen is also heated and the heat of the screen is effecting the buttons. thats why you need harder pressure for the phone to understand this is your finger.
Click to expand...
Click to collapse
The Desire's digitizer is the same Clearpad 2000 which is used in the Nexus One (and quite a few others), the problem there is that it's pants.
Rusty! said:
They work with capacitance, not heat. Hence it being called a capacitive screen with capacitive buttons.
Click to expand...
Click to collapse
lol, isnt called like that because it registers the heat from your fingers. thats why if you try to use a pen, it wont register . and thus. the screen is NOT resistive type "where it will recognize anything since its being pushed by force ? "
Much more too it than that: http://en.wikipedia.org/wiki/Capacitive_touch_screen
Rusty! said:
Much more too it than that: http://en.wikipedia.org/wiki/Capacitive_touch_screen
Click to expand...
Click to collapse
from your link
"A capacitive touchscreen panel is one which consists of an insulator such as glass, coated with a transparent conductor such as indium tin oxide (ITO).[7][8] As the human body is also a conductor, touching the surface of the screen results in a distortion of the screen's electrostatic field, measurable as a change in capacitance. Different technologies may be used to determine the location of the touch. The location is then sent to the controller for processing.
I'm fixing an infuse for a friend who needed the screen replaced simple enough job so I thought as I repair phones and electronics as kind of a hobby. However the replacement screen isn't responding to any kind of touch at all. It displays the puzzle piece lock screen and everything else even shows there's been some missed calls ect. yet will not respond to any kind of touch. I think it's a calibration issue but I can't get passed the lock screen so there's no way to change the setting. Honestly I'm most worried about all the media on the phone most (pics, videos, contacts, ect )
If there is a way I can retrieve that off the internal storage I'll feel better about taking drastic measures. Other things I've noticed is an unusualy long boot up time hanging at the white Samsung letters but this is the first time I've dealt with an infuse so I'm not to sure on that.
Any advice is appreciated.
Thanks,
s1im
There are different versions of screens or maybe it was revisions. At least for the LCD +digitizer assembly. Rev.6.1 and 6.2 and 6.3 if I remember correctly.
Edit....here is a link for reference, also two of the screens were interchangeable but not all three. Sorry I don't remember which ones.
http://item.mobileweb.ebay.com/viewitem?itemId=180914982430&siteId=0&isClassified=false
Edit....my statement regarding interchangeability may not be true. The screen I bought could be used as a replacement for two of the rev numbers. That could mean that it is backward compatible but the other one isn't forward compatible.
The link said this item has been removed, but to be clear your saying not all revisions of screens can be used as replacements that you must find out which rev your original screen is?
s1imch4anc3 said:
The link said this item has been removed, but to be clear your saying not all revisions of screens can be used as replacements that you must find out which rev your original screen is?
Click to expand...
Click to collapse
Correct mine had a sticker on it.
Bummer I have no idea what kind of screen she had I threw it away as a jumbled mess is there any other way to find out what screen it was... either way thanks for the replies
Wish I could answer that, but here is another screenshot. It shows one for 6.0/6.1 and another for 6.2 so my original numbers were off. Did the new one say what it is?
Do you know of any way to retrieve the pics and other media off the phone without being able to unlock the screen
s1imch4anc3 said:
Do you know of any way to retrieve the pics and other media off the phone without being able to unlock the screen
Click to expand...
Click to collapse
Just guessing but maybe adb. You could try to edit the title of your thread or start a new one about this question.
Edit..I have an idea but first a few questions , is this phone stock, and would you be comfortable flashing a kernel if it is? This will give you CWM recovery which has mount USB storage as an option in it. All this can be done with the physical buttons, power and volumes.
I found something that may work without having to make software modifications so I'm going to try that first and if not I'll get back to you...
To answer your questions tho the phone is stock and I've rooted /flashed a couple phones with no problems before so I'm OK with giving it a try
Again I'd like to thank you for your continuous help
You should be able to pull everything you need with adb...but the problem is, is adv enabled? And can you pull a whole directory? I doubt you know individual file names for each media file, not to mention that would be a long tedious process as there are likely well over a 100 if not in the 1000s of music/pics/vids
Well..looks like you can pull a whole.directory (sdcard)
this thread may help http://forum.xda-developers.com/showthread.php?t=744454
Btw...you don't have to be rooted to adv pull
Sent from my HTC PH39100 using Tapatalk 2
UPDATE: I took the phone back apart finally after some grueling hours of adb research that lead me almost in circles and found that the replacement LCD is a rev 6.2 and that the revs 6.0/6.1 are the universal more common screens in the u.s. infuse. I decided to return the screen and get the other rev in hope it will be that easy...
I'd like to thank the 2 above members that gave me help especially adfergurson for sticking with me and my ?s I will post back when the next screen comes in to confirm it worked for anyone else needing this as future reference
s1imch4anc3 said:
UPDATE: I took the phone back apart finally after some grueling hours of adb research that lead me almost in circles and found that the replacement LCD is a rev 6.2 and that the revs 6.0/6.1 are the universal more common screens in the u.s. infuse. I decided to return the screen and get the other rev in hope it will be that easy...
I'd like to thank the 2 above members that gave me help especially adfergurson for sticking with me and my ?s I will post back when the next screen comes in to confirm it worked for anyone else needing this as future reference
Click to expand...
Click to collapse
ADB was the first thing I thought of, but flashing a kernel with custom recovery in Odin should allow you to get into USB storage. I am not familiar with the stock recovery but you could see what options are there. I believe it would be from device powered off hold volume up+volume down+ power buttons then release power at Samsung screen.
Were you able to resolve the screen issue with the different version? I am having the same problem.