Related
So.. here goes my problem..
Got my Qtek 8310 three days ago, and the very same day I got it, decided to upgrade from WM5 to WM6. However, the battery charge meter gave me wrong info about the battery charge percentage, and the phone battery died just after I formatted the BINFS and re-setted the device in TeraTerm.
The device still powered on, after each USB cable re-insert, but died, after 5-10 seconds. After a couple of attempts, the phone didn't turn on at all.
Did some info search on the web and found out, that my battery fell to an critical voltage level. Li-Ion batteries require a certain voltage to even be able to accept a charge.
As I got an non-original battery (Sanyo ST26C) I suppose it is poorly designed and doesn't have good under-voltage protection (I have read about other HTC models (e.g. Wizard) having this problem as well), so the battery dropped below these limits and phone now identifies the battery faulty and doesn't let it charge. This is for consumer safety, because attempting to charge damaged Li-Ion cells can be dangerous, as Lithium is known to be able to catch fire/explode.
So the phone doesn't let to charge the battery in any way (1amp wall charger or USB cable).
Anyways, I tried to jump start the battery (charge with bare wires) to give it initial charge and... it worked. However, there goes my main problem: As soon as I insert the battery which has the initial charge, the phone starts immediately and boots to a bootloader (as there is no OS, formatted BINFS) and the the phone does not charge while in bootloader.
Then, I tried to turn off the phone: Hold down power off button for 5 seconds - phone turned off. But as soon, as I release the button, red light flashes once (as it does everytime, when you try to turn on the phone, it's normal) and then orange LED comes for a second, indicating a charge (as the battery is no longer considered faulty - phone lets it to charge), BUT then phone starts again to the bootloader and it somehow prevents further charge.
So: as soon as I release the power off button, after the phone has shutdown, it starts again, everytime, and soon the battery dies again.
My own thoughts of solving this:
* Get a fully charged battery from a friend, install the windows on the phone, and then charge my own battery (I know noone, who may have HTC Tornado, will be hard to get);
* Buy some standalone dock charger, which can charge batteries directly and charge the battery happily (haven't seen any around yet, so will be really pain in the arse, to get one);
* Charge battery with bare wires for an extended period of time, to give it enough juice to install windows (which I strongly doubt, as battery damage could occur);
Any other ideas? Ideas and comments, from people who know, or had similar experience is more than welcome. Looking forward for answers
Its funny. Reading you I've realized what people tell me about "I make a question and I answer it myself" So... You have the answers my friend. For options 1 and 2, use E-Bay. As a matter of fact, there is an aftermarket charger in ebay that charges your phone and a spare battery and it includes the spare battery when you buy the charger. I believe it runs for under $20.00. For option 3 use some wood cloth pins(those used to hang cloth to dry). I would say with at least 2hrs charge you should get a good 50% charge on your battery, enough to flash your phone.
Edit: Here is an Ebay Search. But, keep searching till you find the one that includes the extra battery. Chances are your battery is no good or won't last you very long.
Good Luck!
Get a new battery man, these li ion batteries, are no joke, especially the fact that they are made in China/Taiwan, I myself had used a tornado battery even till the days when the battery has bloated and cracked the back cover, when a single charge could not even last 4 hours.
Those days, were like having a timebomb in your pocket, ended up I got mysel a new tornado at a price cheaper than a replacement battery.
markanthonypr said:
Its funny. Reading you I've realized what people tell me about "I make a question and I answer it myself" So... You have the answers my friend.
Click to expand...
Click to collapse
Well yes, I have some suggestions, but I am also expecting others to have some, too. And by sharing the knowledge, maybe I could prevent myself to spend more money on this issue
markanthonypr said:
For options 1 and 2, use E-Bay. As a matter of fact, there is an aftermarket charger in ebay that charges your phone and a spare battery and it includes the spare battery when you buy the charger. I believe it runs for under $20.00.
Click to expand...
Click to collapse
The main problem with e-bay is... my country. at least 80% of the items, don't ship to my location.
markanthonypr said:
For option 3 use some wood cloth pins(those used to hang cloth to dry). I would say with at least 2hrs charge you should get a good 50% charge on your battery, enough to flash your phone.
Click to expand...
Click to collapse
Thanks for the suggestion. The main reason why I am in serious doubt about this option, is that standard chargers usually have some sort of regulators and monitors the charge, prevents from overcharging, etc. But on the other side, USB charge output is only 100 mA, so it couldn't be that bad if you think about it
karhoe said:
Get a new battery man, these li ion batteries, are no joke, especially the fact that they are made in China/Taiwan, I myself had used a tornado battery even till the days when the battery has bloated and cracked the back cover, when a single charge could not even last 4 hours.
Those days, were like having a timebomb in your pocket, ended up I got mysel a new tornado at a price cheaper than a replacement battery.
Click to expand...
Click to collapse
Well, the fact, that it is manufactured in China actually says nothing Many companies choose China to manufacture their products because of low costs. And the most of electronics is manufactured in China and other Asian countries.
Anyway, before getting myself an new battery, I would like to try resurrect this one If this won't last long for me - no problem, I will get an new one. But until I'm convinced enough, it's a waste of money, which I don't like doing
And one more thing.. maybe someone knows a way to keep the phone power off?
Because as I said earlier on, it's charging only when it's turned off, and not in the bootloader. And problem is that, as soon as I put the battery, it starts-up the bootloader.
Get a desktop charger perhaps?
Or if you are adventurous enough, mod the USB cable, and charge the battery directly, only if you know what you're doing, and only if it works
karhoe said:
Get a desktop charger perhaps?
Click to expand...
Click to collapse
Well.. thanks for the answer, but we've already discussed this option and now I am asking whether or not, someone knows a way to turn off the phone and keep it turned off (prevent from self startup) while the phone has no OS (got formatted BINFS).
karhoe said:
Or if you are adventurous enough, mod the USB cable, and charge the battery directly, only if you know what you're doing, and only if it works
Click to expand...
Click to collapse
I've already done that, and yes, it works. But I need someone to confirm, if it is safe enough to charge the battery for an hour or two.
Have anyone tried that?
I don't think that it's very safe. But I was having a similar problem, and I just left the phone connected to the power cable, and even though it seemed like it was not charging, it apparantly was.
Or you could just get a new battery. On expansys I saw a new one for ~$20.
nav1 said:
I was having a similar problem, and I just left the phone connected to the power cable, and even though it seemed like it was not charging, it apparantly was.
Click to expand...
Click to collapse
Well..
With a modified USB cable (bare wires), which got power output of 100mA I have charged battery directly for approximately 3 minutes, and the phone turned on, and was operational for 4-5 minutes until the battery died again.
And before that, I've tried leaving it on an mains charger, which got power output of 1A (1000mA, 10 times USB). I left it for a hour or two, although no led was showing up to indicate a charge. The phone didn't event turn on after this 2 hour "charge".
And the reason for this is explained in my first post. Will try to leave it charge over a night, though, expecting for a miracle
nav1 said:
Or you could just get a new battery. On expansys I saw a new one for ~$20.
Click to expand...
Click to collapse
But new batteries usually come empty, so it's no use to me. I have also explained why, on my previous posts.
So before buying an cradle charger, I would like to find out if these budget-friendly solutions will work:
1) Find out how to keep the phone powered down (because it's the only moment, when it truly charges);
2) Find out if it is safe enough to charge battery with bare wires for extended period of time (1-2 hours);
Just came up with another idea. Searched the forums and found a very similar problem to mine:
fritzgerald said:
For some odd reason my wizard likes to say the battery is full when its actually dead and that it's dead when it's really full. Well a few days ago I was reflashing to try and take care of the issue and it died during the middle of flashing. It would only goto the bootloader screen and would not charge. Well I decided I'd post a few pictures of my recovery technique utilizing my wife's phone. Cat5 cable striped at the end and twisted to each of the positive and negative battery terminals and the Blackberry's battery put it so I could use it to power the wizard.
Click to expand...
Click to collapse
So.. I've got a Sony Ericsson w810i, would this technique work? The w810's battery is Li-Polymer, 900mAh 3.6V (although some sources say, that this exact battery is 3.7V..), compared to Li-Ion 1150mAh 3.7V Tornado's battery.
Voltage seems suitable..
Haven't got any answers to my previous posts, so I tried.
The trick worked, Sony ericsson's battery can feed HTC Tornado perfectly. However... got another problem..
Here's how I wired it up. The positive wire takes two contacts and the negative takes another two aswell. The ends of the wires are then connected to the sony ericsson's battery. Phone starts, and boots to a bootloader. Everything's seem to be perfect.
Then I plug in the USB cable into the computer, the other end to the phone. Phone recognizes the cable and puts label "USB" at the bottom of the screen.
However, there's something wrong with the connection.. TeraTerm fails to connect and Update ROM utility fails, too, with an "cannot connect" error..
After that, I have tried using the original battery, with no wires attached, just plugged it in (gave it an initial charge again) and the USB worked without any problems: TeraTerm can connect.
So the problem seems to be in wiring.
I have tried to connect the wires in different random ways (crazy, I know), but only one alternate way did worked. Although, phone did heat-up rapidly at the area, where it says "HTC Innovation" and phone's display showed "USB" even if no USB cable was connected.
So.. looking forward to some thoughts or any knowledge, of why is this happening, wiring schemes, or any other suggestions..
FINALLY! SUCCESS!! I've connected the wires from the sony ericsson's battery to touch only one pin on the phone, instead of two, as shown in the picture. The phone didn't turn on, as I've tried this before.
But then remembered that the same pins charge the original battery, so inserted the battery and VOILA! Phone turned on to the bootloader and the USB circuit wasn't blocked no more! Flashed the phone to WM6.5 now successfully and the original battery is charging, as I write this post )
So, if anyone got HTC smartphone dead, while flashing, let me know, will try to help you out, since I've walked through this hell myself
Thanks goes to karhoe, for an excellent guide for flashing, also dharvey4651 for an excellent guide on installing vista's USB drivers (got new PC, upgraded to vista) and last, but not least - the whole XDA-developers community for helping me out
1A Wall Charger Works!!
I've had the same problem discussed above. I was trying some of my own 6.5 ROMs, which by the way were getting stuck at the initial boot screen itself. Due to some unavoidable reasons and circumstances, the phone freely was left to itself at this exact state, untethered to any power source, for extended periods of time, during which it slept and refused to wake up again, all my pleadings going in vain. And when it did boot, it went into the tricolor screen conveniently and switched off in ten seconds. I turned to the net for help and found that any charger with rating above 1A would help in giving it the required juice. I didn't want to waste any of the 6 USB cables I have.
I got the original charger, which is an 1A charger, after 2-3 hours of searching my room (Hey, Don't be too hard on me! In the end, I got it, right? Actually, I use the PC for charging, and a smaller 550mA one sometimes-- both didn't work this time) and then, when I connected it showed the screen again. But this time, I found that it was capable of running it without the battery being present.
So, all I did was I kept the charger connected to it with the phone switched on in the tricolor mode and with the battery inside. After half an hour, I tethered it to the PC and flashed a proper ROM. And Voila!!! IT WORKED!! It was 2.45 in the morning!!
I guess the power from the 1A charger is enough for the phone to run and charge it too which is not the case in the 550mA one and the USB cable.
rajathvsm said:
I've had the same problem discussed above. I was trying some of my own 6.5 ROMs, which by the way were getting stuck at the initial boot screen itself. Due to some unavoidable reasons and circumstances, the phone freely was left to itself at this exact state, untethered to any power source, for extended periods of time, during which it slept and refused to wake up again, all my pleadings going in vain. And when it did boot, it went into the tricolor screen conveniently and switched off in ten seconds. I turned to the net for help and found that any charger with rating above 1A would help in giving it the required juice. I didn't want to waste any of the 6 USB cables I have.
I got the original charger, which is an 1A charger, after 2-3 hours of searching my room (Hey, Don't be too hard on me! In the end, I got it, right? Actually, I use the PC for charging, and a smaller 550mA one sometimes-- both didn't work this time) and then, when I connected it showed the screen again. But this time, I found that it was capable of running it without the battery being present.
So, all I did was I kept the charger connected to it with the phone switched on in the tricolor mode and with the battery inside. After half an hour, I tethered it to the PC and flashed a proper ROM. And Voila!!! IT WORKED!! It was 2.45 in the morning!!
I guess the power from the 1A charger is enough for the phone to run and charge it too which is not the case in the 550mA one and the USB cable.
Click to expand...
Click to collapse
Glad to hear that it worked for you Unfortunately, it didn't for me (as I only have an after-market charget, not the OEM one, although it is 1A), so I had to search for alternative methods.
Yesterday I missed a call because screen didn't respond on touch, I was blaming on tithering (which by the way had rebooted phone twice today), but today I've noticed when this happens and I unplug the phone, it instantaniosly fixes the screen (and buttons as well), plugging it back in, freezes it. Was playing with it for a minute just to make sure..
Anyone experiencing anything like this?
P.S.
Installed "CPU Guage" which shows cpu load in real time in tasks bar, I can see the numbers changes but nothing above 30%, so it wasn't CPU overload
i haven't had that, until about 2 minutes ago. funny this was posted just now, i just logged in to post about it, lol. but my phone has been fine, until just now. i plugged it in and when to change it to mass storage mode and it wouldn't respond. then it was kind of weird when it started responding. it eventually worked, but took a couple of swipes.
---------- Post added at 06:39 PM ---------- Previous post was at 06:37 PM ----------
i also notice that when unplugged, i get around 44-45 linpack, plugged in, around 35
Nope, just tested it, plugged to the wall I could answer a call normally.
it might be because of short circuit, check ur charger or charge with another charger or cable see if it happen again.
I have it too. Anytime its plugged in it will be super laggy and/or freeze.
Sent from my MB865 using xda premium
I haven't seen this issue on the Atrix 2 yet, but both my Samsung Moment and Samsung Epic would have screen responsiveness issues while plugged in, so it is behavior I have seen in other Android devices.
I havent had this problem. When I go to bed I put my phone on the charger, wall type, and will usually mess around on the phone for a little while before setting it down for the night. Not once has it given me this problem.
Sent from my MB865 using XDA App
I don't have this problem all the time either, it happened only twice in two days. Just now checked it again - no problem whatsoever...
Perhaps if we trace what is running and/or what was running before this happens, we could figure something out.
Today I was using pandora, sportypal (which by the way consumes 40% cpu at times, on Atrix 4G never had this problem) and then after these two apps where closed I used mobile hotspot.
On background two apps are always running: battery cyrlce and nettraffic (there are many more apps started but they seems to be inactive, like skype which doesn't log me in automatically)
Oh and it could make difference, I use ADWLauncher EX
I don't have any of these problems. Get up every morning and check missed calls, emails, texts and FB notifications all while being plugged into the charger. Had someone call me and I answered it on speaker phone to make sure I didn't have any problems receiving a call while plugged in either
No problems so far, but I am completely stock. Phone was purchased on the Nov. 11th
wow, just had it happen.
Don't have this problem either but I am completely stock also.
Coldheat1906
Sent from my MB865 using XDA App
I don't seem to have this problem in the morning either, I notice it at about 11am - 1pm
Today I've killed every apps that was running (excluded services), but it didn't help at all. I still suspect mobile hotspot though, it doesn't work properly...client's get disconnected, then would not able obtain IP.
OEM charger and cable only
Make sure you are using ONLY the OEM charger and OEM cable to charge your phone. They provide an extra ground path not normally supplied which is needed by your capacitive touchscreen to function normally. A "normal" micro USB cable or USb charger does not provide this.
bigddybn said:
Make sure you are using ONLY the OEM charger and OEM cable to charge your phone. They provide an extra ground path not normally supplied which is needed by your capacitive touchscreen to function normally. A "normal" micro USB cable or USb charger does not provide this.
Click to expand...
Click to collapse
I have a charger by my bed, a charger in my work van, a charger at my desk at work and a charger on my pc....of all those, only the one by my bed is the oem charger and the oem cord, my phone works perfectly on all of them.
Ok, it has nothing to do with the type of charger, it even happens when connected to PC as storage or charge only. Changing cables also have no affect.
Me too
[email protected] said:
Yesterday I missed a call because screen didn't respond on touch, I was blaming on tithering (which by the way had rebooted phone twice today), but today I've noticed when this happens and I unplug the phone, it instantaniosly fixes the screen (and buttons as well), plugging it back in, freezes it. Was playing with it for a minute just to make sure..
Anyone experiencing anything like this?
Click to expand...
Click to collapse
I had this happen A LOT! Happened almost always with one particular charger, rarely happened when hooked up to computer USB port. Never happened in car using Griffin iPad car charger.
This was one of the frustrating things about the phone for me. Just sold, and have Galaxy Note on the way.
Hey people I have this similar issue... was searching xda for anything like this but seems this is the only place there is some issue like this happening...
I have a Galaxy S2 Running Cyanogen7 ...
Now here's what IV noticed... on stock charger I have no issues at all... nor when plugged into the PC... just today it happened and I was using a iPhone charger with a OEM Samsung USB cable... it was charging fine but the screen just wouldn't respond... as soon as unplugged would be fine... so... I'm thinking it's this charger maybe giving too much power to the phone... as my stock charger is 750ma while the iPhone one is 1A... that's the farthest IV been able to think... :s
Sent from my Galaxy SII
[email protected] said:
Yesterday I missed a call because screen didn't respond on touch, I was blaming on tithering (which by the way had rebooted phone twice today), but today I've noticed when this happens and I unplug the phone, it instantaniosly fixes the screen (and buttons as well), plugging it back in, freezes it. Was playing with it for a minute just to make sure..
Anyone experiencing anything like this?
P.S.
Installed "CPU Guage" which shows cpu load in real time in tasks bar, I can see the numbers changes but nothing above 30%, so it wasn't CPU overload
Click to expand...
Click to collapse
motorola contacted me to send them my phone and car dock, and they would swap them with new units so they can use mine with testing. you should go to the motorola atrix 2 owners forums and talk to mark
I've owned this phone for roughly 36 hours. I noticed last night (which is the first night owning the phone) that when the phone is charging, it doesn't seem to acknowledge my finger touching the screen. Since the phone was new, the only apps downloaded at the time were:
Lets Golf 2
Angry Birds
Tiny Bee Demo and,
AVG Anti-Virus
Things to note:
I did download the 3 games before the anti-virus program, so the possibility of a virus is there, but not likely.
I also didn't delete any apps or change any major settings that might cause the problem.
One other odd thing I noticed, I was in the middle of a text when I plugged in the charger, and that somehow made it insert a letter. I thought it was odd so I made sure it wasn't me touching the screen and tried it again, and it typed two other random numbers.
I hope this helps somebody somewhere find the fix to this problem... :cool
Edit: I have an Atrix 2
itz_speld_rong said:
I've owned this phone for roughly 36 hours. I noticed last night (which is the first night owning the phone) that when the phone is charging, it doesn't seem to acknowledge my finger touching the screen. Since the phone was new, the only apps downloaded at the time were:
Lets Golf 2
Angry Birds
Tiny Bee Demo and,
AVG Anti-Virus
Things to note:
I did download the 3 games before the anti-virus program, so the possibility of a virus is there, but not likely.
I also didn't delete any apps or change any major settings that might cause the problem.
One other odd thing I noticed, I was in the middle of a text when I plugged in the charger, and that somehow made it insert a letter. I thought it was odd so I made sure it wasn't me touching the screen and tried it again, and it typed two other random numbers.
I hope this helps somebody somewhere find the fix to this problem...
Click to expand...
Click to collapse
#1 if you are downloading trusted apps, you don't need an anti-virus
#2 uninstall the anti-virus because you don't need it and it's a system resource hog
Hi,
Last year my girlfriend allowed me to root her Sensation to try out different ROMs and all went well. A few months ago however, she started to have problems while charging her phone.
If she plugs it in while the phone is closed, the orange LED flashes on/off at around a 2 second interval, instead of holding it's colour. Furthermore, it never changes to green to indicate that the charge is complete. When the phone is in this state, she can't turn her phone on either - she has to unplug it in order to turn it on. If the phone is already on, and she plugs it in, everything behaves normally.
Either than that, the battery seems to hold the charge normally and the rest of the phone still works very well.
I've tried searching for similar problems but haven't landed on anything similar or which may be helpful. It's really got me stumped to what could be the cause, and more importantly, how to fix it!
Would someone have any ideas?
Thanks!
Does the phone behaves in same manner if it's fully charge n switched off when plugged to the charger.does the orange led fluctuate.
The orange led fluctuate whn the voltage of charger is less and it takes times to charge try switching the charger means if you use wall charger then charge through pc and vice versa
Hit thanks button if you find me helpfully
sent from amazing HTC sensation using xda premium
We tried switching from wall plug to USB on the laptop and it does the same thing. However, we noticed that if the battery isn't completely drained, the led doesn't flash - it charges normally.
Would there be a way around this?
I'd pick on the odds that the LED light hardware controller is slightly faulty, but if its really like you said its nothing to worry about, right?
System92 said:
We tried switching from wall plug to USB on the laptop and it does the same thing. However, we noticed that if the battery isn't completely drained, the led doesn't flash - it charges normally.
Would there be a way around this?
Click to expand...
Click to collapse
Hi,
greetings
this used to happen with me when i was on stock rom.
the problem is when the battery is completely drained it needs lots of voltage to get charge
for this problem i took my cell to htc service center and they replaced the adapter and the problem was solved
i think you must buy a new adapter or say a new charger i thing that must solve your problem of led and your phone will get charge as normal even with the battery completely drained OR i think we get wall chargers you can look at the picture in which we have to place the battery and the battery gets charged you justt have to put the battery.. this charger is locally available in indian market for 80 to 100 rs.. you can search on net for the charger this is really a good thing and is a universal charger chagers each and every battery here in india we call it as khekda (marathi word for carb ) charger
let me know if it does solve your battery
Its been more than a week since my Moto G died. Before it happened it had 40% battery. The was the first 2 days the phone turned on quite a few times, only to make it to the boot logo. After that it didn't do anything at all and I lost hope. But 3 days ago it started doing something weird. Every time I connect the phone the LED lights up and turns off when disconnected. If I leave the device charging the LED stays on for like half an hour. Then it comes back on, in like an hour or so.
I've tried a lot of ways to turn the device but nothing helps.
Does anyone know what does the LED mean?
juanp31 said:
Its been more than a week since my Moto G died. Before it happened it had 40% battery. The was the first 2 days the phone turned on quite a few times, only to make it to the boot logo. After that it didn't do anything at all and I lost hope. But 3 days ago it started doing something weird. Every time I connect the phone the LED lights up and turns off when disconnected. If I leave the device charging the LED stays on for like half an hour. Then it comes back on, in like an hour or so.
I've tried a lot of ways to turn the device but nothing helps.
Does anyone know what does the LED mean?
Click to expand...
Click to collapse
I'm not an expert on the subject but, I think the LED lights because the battery, try to restoring the stock rom via fastboot, if you don't know how do this, just put in the google: Motorola Moto G XT10XX Stock ROM
XX is the model, 32 is the Single SIM version, 34 Single is the SIM Model AWS (I think that is Moto G bought at T-Mobile and AT&T), 28 is BoostMobile version and 33 is Dual SIM version
Sorry for my bad english
Itachitops said:
I'm not an expert on the subject but, I think the LED lights because the battery, try to restoring the stock rom via fastboot, if you don't know how do this, just put in the google: Motorola Moto G XT10XX Stock ROM
XX is the model, 32 is the Single SIM version, 34 Single is the SIM Model AWS (I think that is Moto G bought at T-Mobile and AT&T), 28 is BoostMobile version and 33 is Dual SIM version
Sorry for my bad english
Click to expand...
Click to collapse
I can't get into fastboot though.
juanp31 said:
I can't get into fastboot though.
Click to expand...
Click to collapse
The device don't boot and you can't go to fastboot mode, now I think that is a hardware problem, the better you can do is send the device to assistance
The Cells may be dead or very low charge. Um remindea me of my old blackberry, try holding power then plugging charger in, keep the power button pressed though
Sent from my XT1032 using XDA Free mobile app
Your Phone charge is below 5%
juanp31 said:
I can't get into fastboot though.
Click to expand...
Click to collapse
I think battery charge is very low like below 5% or even 0%, hence you r not getting fastboot screen.
following is motorola forum text
My device does not seem to be charging, or is doing so slower than I expect. What could cause this?
It is best to use the Motorola charger that came with your phone. Chargers have different output capacities, and a weak charger will take longer to charge your battery. If you are using the device heavily at the time, it may be possible for a weak charger to fail to provide enough energy to actually charge at all.
Inspect the charger. Ensure it is not damaged - check the insulation on the wire for cuts, ensure the micro-USB plug fits securely into the device, and that the transformer (the larger portion with the wall outlet plugs) is not visible damaged. Some wall outlets can be loose - the prongs of the plug do not firmly make contact with the conductors inside the wall. While connected to your phone, jiggle the charger at the wall outlet and watch the battery icon at the top of the phone's status bar. If the charging icon Image shows intermittently, try using a different outlet (and get an electrician to replace the loose outlet).
If your battery is completely discharged, it may take several minutes for the device to begin charging. The battery needs to charge to a minimum voltage before the system can boot up, and this may take a few moments to achieve.
If you have already been using your phone for a while, sometimes a collection of applications are using resources and background services that keep your phone more active than it needs to be. A quick and easy test is to reboot your phone if you have not turned it off in a long time (> 1 week). Press and hold the power key to select the Power Off option. Then turn your phone back on and charge your phone normally. Try to observe if any particular applications that you use correlate with the phone using dramatically more energy than you expect (discharging faster or charging slower).
Your phone is a complex device. If you believe that something is wrong with it or how it is behaving, please contact MotoCare and we may be able to provide more detailed assistance.
Sree.dhar said:
I think battery charge is very low like below 5% or even 0%, hence you r not getting fastboot screen.
following is motorola forum text
My device does not seem to be charging, or is doing so slower than I expect. What could cause this?
It is best to use the Motorola charger that came with your phone. Chargers have different output capacities, and a weak charger will take longer to charge your battery. If you are using the device heavily at the time, it may be possible for a weak charger to fail to provide enough energy to actually charge at all.
Inspect the charger. Ensure it is not damaged - check the insulation on the wire for cuts, ensure the micro-USB plug fits securely into the device, and that the transformer (the larger portion with the wall outlet plugs) is not visible damaged. Some wall outlets can be loose - the prongs of the plug do not firmly make contact with the conductors inside the wall. While connected to your phone, jiggle the charger at the wall outlet and watch the battery icon at the top of the phone's status bar. If the charging icon Image shows intermittently, try using a different outlet (and get an electrician to replace the loose outlet).
If your battery is completely discharged, it may take several minutes for the device to begin charging. The battery needs to charge to a minimum voltage before the system can boot up, and this may take a few moments to achieve.
If you have already been using your phone for a while, sometimes a collection of applications are using resources and background services that keep your phone more active than it needs to be. A quick and easy test is to reboot your phone if you have not turned it off in a long time (> 1 week). Press and hold the power key to select the Power Off option. Then turn your phone back on and charge your phone normally. Try to observe if any particular applications that you use correlate with the phone using dramatically more energy than you expect (discharging faster or charging slower).
Your phone is a complex device. If you believe that something is wrong with it or how it is behaving, please contact MotoCare and we may be able to provide more detailed assistance.
Click to expand...
Click to collapse
The weird thing is it died at 40% and when plugged it in and tried to turn it on the first few times I saw the battery screen state a 40% charge. Then when trying to turn it on It showed the boot logo and then screen went black. After those few times (3-4) the phone didn't even power on or show the battery screen. I'm screwed since the bootloader is unlocked. So I can't return it. Its been more than a week and I really miss the phone and android and now I'm stuck now with my iPod touch. Guess I'll have to start saving to buy a new phone.
Weird thing is my previous phone died in a similar way: I was in the car and it suddenly turned off and then it did nothing.
Hi there,
So just some observations...
When I use the wireless charging pad (TYLT VU) the phone will constantly BEEP BOOP and the screen turns on to say wireless charging paused it will then turn off after a few seconds.
I've read in other forms this could be due to overheating etc.... but in touching the phone it's not hot.
This is annoying... And... no current fix I can find to stop it.
Borrow another wireless charger (or go to a Starbucks or something) to see if it's the device.
If not, you might have a damaged charging pad.
I've been getting a lot of "wireless charging paused" messages as well. I have my phone on my desk, streaming audio, and it occasionally turns on and that messages comes up, and then it immediately starts charging again...hmmm...
I have 8 pads around my house, all the Nokia D900s that they gave away with the Lumia 920s. Last night I experienced this for about... 15 seconds or so. I readjusted the phone and it worked fine thereafter. Sucks that the beeping woke us up at 5am though.
I don't think it's my pad, it happens on both.
I think positioning could be part of the cause?
Oh well...
Again, just observations I'm seeing.
h20wakebum said:
I don't think it's my pad, it happens on both.
I think positioning could be part of the cause?
Oh well...
Again, just observations I'm seeing.
Click to expand...
Click to collapse
I'm having the same problem on my S6 Edge. I have a couple TYLT chargers and they work perfectly fine with my Nexus 5, Nexus 6 and Nexus 7's... both work flawlessly with those. But they both fail to work properly with the S6.
I'm pretty disappointed with this. Anyone got any ideas or know of a similar shaped charger that works with the S6? I really don't want to go back to my Nexus 6 due to the size, but having the phone beeping and flashing all night trying to charge is unacceptable.
My regular S6 was doing this last night. I wonder if it has something to do with the camera sticking out and not letting the phone lay flat?
I don't like charging it with the USB because I know the frame will get all scratched up eventually.
Running into the same problem with my T-Mobile S6. After setting it on a new 3 coil charging pad, the phone looks to be taking the charge, then once the screen times out and turns off, it will vibrate, turn back on, and display "Wireless Charging Paused".
jayr04 said:
My regular S6 was doing this last night. I wonder if it has something to do with the camera sticking out and not letting the phone lay flat?
Click to expand...
Click to collapse
On my Qi-infinity stand, it actually does lay flat as the charging pad ends just below the camera, so I don't think that's the case here.
Update: So I've managed to solve my problem by changing the wall adaptor from an old 1A Motorola plug to a 1.5A version and it's currently charging without troubles. Switch back just to confirm and within seconds, it starts giving me trouble again. I guess the S6 is picky about the power levels? *shrugs*
h20wakebum said:
Hi there,
So just some observations...
When I use the wireless charging pad (TYLT VU) the phone will constantly BEEP BOOP and the screen turns on to say wireless charging paused it will then turn off after a few seconds.
I've read in other forms this could be due to overheating etc.... but in touching the phone it's not hot.
This is annoying... And... no current fix I can find to stop it.
Click to expand...
Click to collapse
I was having the same issues. It turned out I was getting my monies worth out of the $5 walmart special I was using. I ended up getting a 3 coil charging pad and now it charges just fine. Nary a hiccup.
Link to 3 Coil Charger I'm using
everyone remember to use a 2A (possibly 1.5 amp input is also okay) charger. the output will be ~1A. This was the solution to many of the cheaper wireless chargers on ebay/amazon. Just one more thing to check!
http://bobmckay.com/i-t-support-net...charging-problems-charging-paused-repeatedly/
CHECK THIS LINK GUYS
Best Solution
In the last solution, turning on Daydream will let the phone's screen on unless you turn it off.
Another better solution is to enter developer mode and turn ON StayAwake. Same effect of daydream but without the annoying on screen.
Cheers