Related
So.. here goes my problem..
Got my Qtek 8310 three days ago, and the very same day I got it, decided to upgrade from WM5 to WM6. However, the battery charge meter gave me wrong info about the battery charge percentage, and the phone battery died just after I formatted the BINFS and re-setted the device in TeraTerm.
The device still powered on, after each USB cable re-insert, but died, after 5-10 seconds. After a couple of attempts, the phone didn't turn on at all.
Did some info search on the web and found out, that my battery fell to an critical voltage level. Li-Ion batteries require a certain voltage to even be able to accept a charge.
As I got an non-original battery (Sanyo ST26C) I suppose it is poorly designed and doesn't have good under-voltage protection (I have read about other HTC models (e.g. Wizard) having this problem as well), so the battery dropped below these limits and phone now identifies the battery faulty and doesn't let it charge. This is for consumer safety, because attempting to charge damaged Li-Ion cells can be dangerous, as Lithium is known to be able to catch fire/explode.
So the phone doesn't let to charge the battery in any way (1amp wall charger or USB cable).
Anyways, I tried to jump start the battery (charge with bare wires) to give it initial charge and... it worked. However, there goes my main problem: As soon as I insert the battery which has the initial charge, the phone starts immediately and boots to a bootloader (as there is no OS, formatted BINFS) and the the phone does not charge while in bootloader.
Then, I tried to turn off the phone: Hold down power off button for 5 seconds - phone turned off. But as soon, as I release the button, red light flashes once (as it does everytime, when you try to turn on the phone, it's normal) and then orange LED comes for a second, indicating a charge (as the battery is no longer considered faulty - phone lets it to charge), BUT then phone starts again to the bootloader and it somehow prevents further charge.
So: as soon as I release the power off button, after the phone has shutdown, it starts again, everytime, and soon the battery dies again.
My own thoughts of solving this:
* Get a fully charged battery from a friend, install the windows on the phone, and then charge my own battery (I know noone, who may have HTC Tornado, will be hard to get);
* Buy some standalone dock charger, which can charge batteries directly and charge the battery happily (haven't seen any around yet, so will be really pain in the arse, to get one);
* Charge battery with bare wires for an extended period of time, to give it enough juice to install windows (which I strongly doubt, as battery damage could occur);
Any other ideas? Ideas and comments, from people who know, or had similar experience is more than welcome. Looking forward for answers
Its funny. Reading you I've realized what people tell me about "I make a question and I answer it myself" So... You have the answers my friend. For options 1 and 2, use E-Bay. As a matter of fact, there is an aftermarket charger in ebay that charges your phone and a spare battery and it includes the spare battery when you buy the charger. I believe it runs for under $20.00. For option 3 use some wood cloth pins(those used to hang cloth to dry). I would say with at least 2hrs charge you should get a good 50% charge on your battery, enough to flash your phone.
Edit: Here is an Ebay Search. But, keep searching till you find the one that includes the extra battery. Chances are your battery is no good or won't last you very long.
Good Luck!
Get a new battery man, these li ion batteries, are no joke, especially the fact that they are made in China/Taiwan, I myself had used a tornado battery even till the days when the battery has bloated and cracked the back cover, when a single charge could not even last 4 hours.
Those days, were like having a timebomb in your pocket, ended up I got mysel a new tornado at a price cheaper than a replacement battery.
markanthonypr said:
Its funny. Reading you I've realized what people tell me about "I make a question and I answer it myself" So... You have the answers my friend.
Click to expand...
Click to collapse
Well yes, I have some suggestions, but I am also expecting others to have some, too. And by sharing the knowledge, maybe I could prevent myself to spend more money on this issue
markanthonypr said:
For options 1 and 2, use E-Bay. As a matter of fact, there is an aftermarket charger in ebay that charges your phone and a spare battery and it includes the spare battery when you buy the charger. I believe it runs for under $20.00.
Click to expand...
Click to collapse
The main problem with e-bay is... my country. at least 80% of the items, don't ship to my location.
markanthonypr said:
For option 3 use some wood cloth pins(those used to hang cloth to dry). I would say with at least 2hrs charge you should get a good 50% charge on your battery, enough to flash your phone.
Click to expand...
Click to collapse
Thanks for the suggestion. The main reason why I am in serious doubt about this option, is that standard chargers usually have some sort of regulators and monitors the charge, prevents from overcharging, etc. But on the other side, USB charge output is only 100 mA, so it couldn't be that bad if you think about it
karhoe said:
Get a new battery man, these li ion batteries, are no joke, especially the fact that they are made in China/Taiwan, I myself had used a tornado battery even till the days when the battery has bloated and cracked the back cover, when a single charge could not even last 4 hours.
Those days, were like having a timebomb in your pocket, ended up I got mysel a new tornado at a price cheaper than a replacement battery.
Click to expand...
Click to collapse
Well, the fact, that it is manufactured in China actually says nothing Many companies choose China to manufacture their products because of low costs. And the most of electronics is manufactured in China and other Asian countries.
Anyway, before getting myself an new battery, I would like to try resurrect this one If this won't last long for me - no problem, I will get an new one. But until I'm convinced enough, it's a waste of money, which I don't like doing
And one more thing.. maybe someone knows a way to keep the phone power off?
Because as I said earlier on, it's charging only when it's turned off, and not in the bootloader. And problem is that, as soon as I put the battery, it starts-up the bootloader.
Get a desktop charger perhaps?
Or if you are adventurous enough, mod the USB cable, and charge the battery directly, only if you know what you're doing, and only if it works
karhoe said:
Get a desktop charger perhaps?
Click to expand...
Click to collapse
Well.. thanks for the answer, but we've already discussed this option and now I am asking whether or not, someone knows a way to turn off the phone and keep it turned off (prevent from self startup) while the phone has no OS (got formatted BINFS).
karhoe said:
Or if you are adventurous enough, mod the USB cable, and charge the battery directly, only if you know what you're doing, and only if it works
Click to expand...
Click to collapse
I've already done that, and yes, it works. But I need someone to confirm, if it is safe enough to charge the battery for an hour or two.
Have anyone tried that?
I don't think that it's very safe. But I was having a similar problem, and I just left the phone connected to the power cable, and even though it seemed like it was not charging, it apparantly was.
Or you could just get a new battery. On expansys I saw a new one for ~$20.
nav1 said:
I was having a similar problem, and I just left the phone connected to the power cable, and even though it seemed like it was not charging, it apparantly was.
Click to expand...
Click to collapse
Well..
With a modified USB cable (bare wires), which got power output of 100mA I have charged battery directly for approximately 3 minutes, and the phone turned on, and was operational for 4-5 minutes until the battery died again.
And before that, I've tried leaving it on an mains charger, which got power output of 1A (1000mA, 10 times USB). I left it for a hour or two, although no led was showing up to indicate a charge. The phone didn't event turn on after this 2 hour "charge".
And the reason for this is explained in my first post. Will try to leave it charge over a night, though, expecting for a miracle
nav1 said:
Or you could just get a new battery. On expansys I saw a new one for ~$20.
Click to expand...
Click to collapse
But new batteries usually come empty, so it's no use to me. I have also explained why, on my previous posts.
So before buying an cradle charger, I would like to find out if these budget-friendly solutions will work:
1) Find out how to keep the phone powered down (because it's the only moment, when it truly charges);
2) Find out if it is safe enough to charge battery with bare wires for extended period of time (1-2 hours);
Just came up with another idea. Searched the forums and found a very similar problem to mine:
fritzgerald said:
For some odd reason my wizard likes to say the battery is full when its actually dead and that it's dead when it's really full. Well a few days ago I was reflashing to try and take care of the issue and it died during the middle of flashing. It would only goto the bootloader screen and would not charge. Well I decided I'd post a few pictures of my recovery technique utilizing my wife's phone. Cat5 cable striped at the end and twisted to each of the positive and negative battery terminals and the Blackberry's battery put it so I could use it to power the wizard.
Click to expand...
Click to collapse
So.. I've got a Sony Ericsson w810i, would this technique work? The w810's battery is Li-Polymer, 900mAh 3.6V (although some sources say, that this exact battery is 3.7V..), compared to Li-Ion 1150mAh 3.7V Tornado's battery.
Voltage seems suitable..
Haven't got any answers to my previous posts, so I tried.
The trick worked, Sony ericsson's battery can feed HTC Tornado perfectly. However... got another problem..
Here's how I wired it up. The positive wire takes two contacts and the negative takes another two aswell. The ends of the wires are then connected to the sony ericsson's battery. Phone starts, and boots to a bootloader. Everything's seem to be perfect.
Then I plug in the USB cable into the computer, the other end to the phone. Phone recognizes the cable and puts label "USB" at the bottom of the screen.
However, there's something wrong with the connection.. TeraTerm fails to connect and Update ROM utility fails, too, with an "cannot connect" error..
After that, I have tried using the original battery, with no wires attached, just plugged it in (gave it an initial charge again) and the USB worked without any problems: TeraTerm can connect.
So the problem seems to be in wiring.
I have tried to connect the wires in different random ways (crazy, I know), but only one alternate way did worked. Although, phone did heat-up rapidly at the area, where it says "HTC Innovation" and phone's display showed "USB" even if no USB cable was connected.
So.. looking forward to some thoughts or any knowledge, of why is this happening, wiring schemes, or any other suggestions..
FINALLY! SUCCESS!! I've connected the wires from the sony ericsson's battery to touch only one pin on the phone, instead of two, as shown in the picture. The phone didn't turn on, as I've tried this before.
But then remembered that the same pins charge the original battery, so inserted the battery and VOILA! Phone turned on to the bootloader and the USB circuit wasn't blocked no more! Flashed the phone to WM6.5 now successfully and the original battery is charging, as I write this post )
So, if anyone got HTC smartphone dead, while flashing, let me know, will try to help you out, since I've walked through this hell myself
Thanks goes to karhoe, for an excellent guide for flashing, also dharvey4651 for an excellent guide on installing vista's USB drivers (got new PC, upgraded to vista) and last, but not least - the whole XDA-developers community for helping me out
1A Wall Charger Works!!
I've had the same problem discussed above. I was trying some of my own 6.5 ROMs, which by the way were getting stuck at the initial boot screen itself. Due to some unavoidable reasons and circumstances, the phone freely was left to itself at this exact state, untethered to any power source, for extended periods of time, during which it slept and refused to wake up again, all my pleadings going in vain. And when it did boot, it went into the tricolor screen conveniently and switched off in ten seconds. I turned to the net for help and found that any charger with rating above 1A would help in giving it the required juice. I didn't want to waste any of the 6 USB cables I have.
I got the original charger, which is an 1A charger, after 2-3 hours of searching my room (Hey, Don't be too hard on me! In the end, I got it, right? Actually, I use the PC for charging, and a smaller 550mA one sometimes-- both didn't work this time) and then, when I connected it showed the screen again. But this time, I found that it was capable of running it without the battery being present.
So, all I did was I kept the charger connected to it with the phone switched on in the tricolor mode and with the battery inside. After half an hour, I tethered it to the PC and flashed a proper ROM. And Voila!!! IT WORKED!! It was 2.45 in the morning!!
I guess the power from the 1A charger is enough for the phone to run and charge it too which is not the case in the 550mA one and the USB cable.
rajathvsm said:
I've had the same problem discussed above. I was trying some of my own 6.5 ROMs, which by the way were getting stuck at the initial boot screen itself. Due to some unavoidable reasons and circumstances, the phone freely was left to itself at this exact state, untethered to any power source, for extended periods of time, during which it slept and refused to wake up again, all my pleadings going in vain. And when it did boot, it went into the tricolor screen conveniently and switched off in ten seconds. I turned to the net for help and found that any charger with rating above 1A would help in giving it the required juice. I didn't want to waste any of the 6 USB cables I have.
I got the original charger, which is an 1A charger, after 2-3 hours of searching my room (Hey, Don't be too hard on me! In the end, I got it, right? Actually, I use the PC for charging, and a smaller 550mA one sometimes-- both didn't work this time) and then, when I connected it showed the screen again. But this time, I found that it was capable of running it without the battery being present.
So, all I did was I kept the charger connected to it with the phone switched on in the tricolor mode and with the battery inside. After half an hour, I tethered it to the PC and flashed a proper ROM. And Voila!!! IT WORKED!! It was 2.45 in the morning!!
I guess the power from the 1A charger is enough for the phone to run and charge it too which is not the case in the 550mA one and the USB cable.
Click to expand...
Click to collapse
Glad to hear that it worked for you Unfortunately, it didn't for me (as I only have an after-market charget, not the OEM one, although it is 1A), so I had to search for alternative methods.
couldn't find any info so i'll see if i can hopefully get some answers
been running my inspire using Existz's ICS rom via the ace hack kit. no problems. i went and picked up an infuse 4g and decided to use it. so had that rooted and running. yesterday backed up everything on the inspire and removed the sim and sd card started using them in the infuse. was still playing games and such on the inspire. here's were things started to act weird. plugged in both phone on the wall charger and powered off the inspire. well it kept rebooting in recovery. i'd go down to power off and it'd come back on. did this maybe 3 times and then finally stayed off. today went to show a friend that was interested in it and it would not power on. no led light, nothing. plugged it in and still nothing. put in the spare battery and no led light or anything. tried to put it into recovery, nadda. put the sim and sd card in thinking it may make a difference, nope. so i'm not getting any power.
any help is appreciated.
BLU CIVIC said:
couldn't find any info so i'll see if i can hopefully get some answers
been running my inspire using Existz's ICS rom via the ace hack kit. no problems. i went and picked up an infuse 4g and decided to use it. so had that rooted and running. yesterday backed up everything on the inspire and removed the sim and sd card started using them in the infuse. was still playing games and such on the inspire. here's were things started to act weird. plugged in both phone on the wall charger and powered off the inspire. well it kept rebooting in recovery. i'd go down to power off and it'd come back on. did this maybe 3 times and then finally stayed off. today went to show a friend that was interested in it and it would power on. no led light, nothing. plugged it in and still nothing. put in the spare battery and no led light or anything. tried to put it into recovery, nadda. put the sim and sd card in thinking it may make a difference, nope. so i'm not getting any power.
any help is appreciated.
Click to expand...
Click to collapse
If the phone is not booting at all and even trying a spare battery is not showing signal of life, then take it to a service centre. When the phone is plugged is showing the led light?
No, no led light anymore. Unsure of how whatever happened happened.
Sent from my SGH-I997 using xda app-developers app
BLU CIVIC said:
No, no led light anymore. Unsure of how whatever happened happened.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Try another cable, maybe is failing and the battery just discharge 100%. Have you tried plugging it to the PC?
glevitan said:
Try another cable, maybe is failing and the battery just discharge 100%. Have you tried plugging it to the PC?
Click to expand...
Click to collapse
plugged it into the computer and the pc "device connected" sound came on and installing driver pop up window came up, but nothing from the screen or led
BLU CIVIC said:
plugged it into the computer and the pc "device connected" sound came on and installing driver pop up window came up, but nothing from the screen or led
Click to expand...
Click to collapse
maybe the screen has issues. Are the capacitive buttons doing anything when you touch them?
No, buttons aren't lighting up either. Going to try some more different cords and try plugging it into my wife's mac book and see if that does anything.
Sent from my SGH-I997 using xda app-developers app
well still nothing. any recommendations on where i can take or send my phone to get repaired?
BLU CIVIC said:
well still nothing. any recommendations on where i can take or send my phone to get repaired?
Click to expand...
Click to collapse
I have no idea about that...but send an email to HTC to see what they tell you...
Try letting it sit and charge for a while second try to boot into hboot. I'm assuming that you rooted your phone so going through HTC for repair is not an option. I had a similar issue I ended up booting into hboot and then flashing a stock rooted img and starting all over with my phone.
Since your computer recognizes the device, did you try to send it a reboot command via adb?
Sent from my Inspire 4G running AOSPX-BR7
No I did not. Not sure how to to do it that way, but I'm sure I can find out how.
After reading a couple threads where people have had the same issue, I left the battery in it and placed it on the nightstand. It started to vibrate a few times and when I hit power I get a solid red led. Will have to search and see what that means.
Sent from my SGH-I997 using xda app-developers app
It sounds like it could be a bad battery. Given the red light, what has me wondering in the vibration prior to you pushing the power button. It almost sounds like the phone shutting down from low battery, but you said it wasn't on.
Sent from my Inspire 4G running AOSPX-BR7
Just a little note on Android phones. If you let them die completely they will not charge the battery from a PC or computer of any kind. The ports on a PC only provide 500ma max and it require at least 1 amp to charge a dead battery. That can only be accomplished by the wall charger that was supplied with the phone. If you are using another charger make sure it says on it that is can supply at least 1 amp or 1000ma any thing less will not charge a dead battery. Also note if the battery is completely dead, then the phone will not charge any way. The phone has to be able to power up and load the OS in order to charge. Androids use a software based charger that does not know how to charge unless the phone can boot and preload the the boot part of the OS. You may need an external charger the battery alone can be placed in or buy a new battery as they will usually have enough of a charge to get you going.
As the previous poster said, it sounds like you have a bad cable from the beginning and all you did is discharged it completely. Get a new cable and try the wall charger. If that does not work then spend 20 bucks and get a new battery.
jrloper said:
It sounds like it could be a bad battery. Given the red light, what has me wondering in the vibration prior to you pushing the power button. It almost sounds like the phone shutting down from low battery, but you said it wasn't on.
Sent from my Inspire 4G running AOSPX-BR7
Click to expand...
Click to collapse
vibrated a couple times when i was in bed. got up and hit the power button and just the red light would come on, nothing else. generally when i had a low battery the phone would boot up, then shut off. not in this case
Solarenemy68 said:
Just a little note on Android phones. If you let them die completely they will not charge the battery from a PC or computer of any kind. The ports on a PC only provide 500ma max and it require at least 1 amp to charge a dead battery. That can only be accomplished by the wall charger that was supplied with the phone. If you are using another charger make sure it says on it that is can supply at least 1 amp or 1000ma any thing less will not charge a dead battery. Also note if the battery is completely dead, then the phone will not charge any way. The phone has to be able to power up and load the OS in order to charge. Androids use a software based charger that does not know how to charge unless the phone can boot and preload the the boot part of the OS. You may need an external charger the battery alone can be placed in or buy a new battery as they will usually have enough of a charge to get you going.
As the previous poster said, it sounds like you have a bad cable from the beginning and all you did is discharged it completely. Get a new cable and try the wall charger. If that does not work then spend 20 bucks and get a new battery.
Click to expand...
Click to collapse
well i have 2 batteries, 2 different plug adapters, 3 different cords and a car charger. tried six different ways charging from a wall adapter and flip flopped batteries as i changed cords and plugging it into the car charger. each cord and the car charger works with my infuse and worked with the inspire that day. battery was at 3/4 when i plugged it in. i guess could try a new batter, but i'm doubtful.
Hello,
So I was playing around flashing roms from here last night, and I was able to load up a rom that I liked, and get it configured to my liking. I noticed while doing that the phone started to get really hot. I didn't think anything of it, and left it on the charger and went to bed. This morning I woke up and the phone has a blinking red light. I did some Googling and it said that it was a completely drained battery. So I put it back on the charger and now the phone was able to boot back up, it says charging, but it is just at 0% and it doesn't seem to go anywhere from there (plugged in via computer) any ideas?
Jaybot said:
Hello,
So I was playing around flashing roms from here last night, and I was able to load up a rom that I liked, and get it configured to my liking. I noticed while doing that the phone started to get really hot. I didn't think anything of it, and left it on the charger and went to bed. This morning I woke up and the phone has a blinking red light. I did some Googling and it said that it was a completely drained battery. So I put it back on the charger and now the phone was able to boot back up, it says charging, but it is just at 0% and it doesn't seem to go anywhere from there (plugged in via computer) any ideas?
Click to expand...
Click to collapse
Revert to stock and see if it still acts like this?
A friend of mine had the same blinking red led.
Turned out the battery was completely drained.
After charging it for a while it was fine again.
DaanJordaan said:
Revert to stock and see if it still acts like this?
A friend of mine had the same blinking red led.
Turned out the battery was completely drained.
After charging it for a while it was fine again.
Click to expand...
Click to collapse
Yup! It was drained, and it wasn't charging when I posted this when I had it plugged into my computer.
I put it on the wall charger and left it set for a few minutes, and then it showed up at 7% so I'm really relieved I didn't brick my phone. I just don't get why it didnt charge last night, I know I plugged it in...
Jaybot said:
Yup! It was drained, and it wasn't charging when I posted this when I had it plugged into my computer.
I put it on the wall charger and left it set for a few minutes, and then it showed up at 7% so I'm really relieved I didn't brick my phone. I just don't get why it didnt charge last night, I know I plugged it in...
Click to expand...
Click to collapse
Yeah that's strange behavior. My dad was playing a game on his N7 which was hooked up to his PC when it suddenly died.
Scared the hell out of him, turned out it hadn't been charging through USB for some reason, or maybe not enough.
Weird about last night. Maybe it wasn't plugged in completely. Have you tried the same socket? Maybe it's dead.
DaanJordaan said:
Yeah that's strange behavior. My dad was playing a game on his N7 which was hooked up to his PC when it suddenly died.
Scared the hell out of him, turned out it hadn't been charging through USB for some reason, or maybe not enough.
Weird about last night. Maybe it wasn't plugged in completely. Have you tried the same socket? Maybe it's dead.
Click to expand...
Click to collapse
The computer charges android devices really slowly. When you're playing a game, it will drain faster than it charges, especially if you charge it by a PC/Mac and not a main power source
Sent from my Nexus 5 using Tapatalk
Blinking Red light??
Dnt worry this indicates that your phonr is just on the verge of its battery
just keep plugged in in for few minutes
now the light will stop blinking and you will get the battery level icon on your screen
Hope this helps you :angel:
Hit the THANKS button if this helps you
krazzykuldeep said:
Dnt worry this indicates that your phonr is just on the verge of its battery
just keep plugged in in for few minutes
now the light will stop blinking and you will get the battery level icon on your screen
Hope this helps you :angel:
Hit the THANKS button if this helps you
Click to expand...
Click to collapse
This thread is old.
Lethargy said:
This thread is old.
Click to expand...
Click to collapse
Srry i just had not checked the date of the post
MY BAD
Blinking red light
Jaybot said:
Yup! It was drained, and it wasn't charging when I posted this when I had it plugged into my computer.
I put it on the wall charger and left it set for a few minutes, and then it showed up at 7% so I'm really relieved I didn't brick my phone. I just don't get why it didnt charge last night, I know I plugged it in...
Click to expand...
Click to collapse
But this never happened to me ealier while using a charger,Today i used just a cable to charge it and i behaved so.Is it because the charge it was getting was less to sustain or do i need to get it checked ?
i have this problem too i evan had it charged for an hour and a half and still no nothing evan started it up on the charger and it still does it i dont know what to do
Is the led still blinking after 1.5 hours on the charger? Maybe try a more powerful charger? Different USB cable?
The USB cable and charger that came with the phone is what I would start with to charge the phone.
audit13 said:
Is the led still blinking after 1.5 hours on the charger? Maybe try a more powerful charger? Different USB cable?
Click to expand...
Click to collapse
Just had the same problem after not charging the phone for 10 months (broke while I was travelling). Just got it working after I ordered and installed a screen replacement from Alibaba. Needed to try 3 different USB Cables.
Maybe just a different USB cable would have solved the problem?
Charging via a computer is the last thing to do. The output is so low.
Hi guys,
I'm having the same problem. My phone has been charging for about twelve hours now and it still won't turn on. I tried using different outlets, but not a different charger since I only have one (original one) and my friends phone did charge with that charger. I also tried pressing the power- and volume button at the same time, but still nothing. Everytime I take my phone out of the charger and plug it in again, the red light starts blinking for a while but then it dies off and nothing happens anymore. Does anyone have anymore tips?
Thanks
Sounds like the battery needs to be replaced or you need a more powerful charger.
i've got this problem except anytime a charging cable is connected, the phone powers on and off continually as if the power button is stuck. tried swapping batteries with a spare n5 i have with a cracked screen and bad IMEI (lousy ebay purchase), made no difference. same thing occurs even with battery disconnected. there's no way to boot into recovery. the red LED blinks when the phone powers off momentarily. tried various cables to charge, multiple locations. any ideas?
Saved me!!
Saved my nexus 5, i love this phone and don't want to lose it even after three years passed way!
thankyou brother you nailed it.
krazzykuldeep said:
Dnt worry this indicates that your phonr is just on the verge of its battery
just keep plugged in in for few minutes
now the light will stop blinking and you will get the battery level icon on your screen
Hope this helps you :angel:
Hit the THANKS button if this helps you
Click to expand...
Click to collapse
Welcome, i've readed alot of topics on the internet about problems similar to this, but nothing fixed my problem. I've tried connecting to wall/pc charger, power button + volume down/up combinations, really all the thing.
Couple days ago after my phone fully discharged ( I rarely had situation like this, I usually charge when my phone have 10-15%, but this day I couldn't. ) I came back home and tried to charge my phone, red light was ON but it still didn't charge after alot of hours. I then tried to fix it, turning on phone etc. but screen was always black and phone didn't want to charge. At first when I tried to boot the Z3 red light was blinking, but after some time it stopped. I ordered new battery, replaced it carefully (though it's battery problem) - then when I connected the new battery for the first time I though I have fixed the problem, battery charging icon showed up for a moment on screen, I was very happy. Then I disconnected charger so I could assemble my phone. Now when I try to charge my phone problem is this same.. like with old battery - Just red light, not turning ON, not blinking. Powering up Key combinations with volume don't fix it. My PC Companion don't see phone. I disassembled my phone again, disconnected battery and connected it - It didn't showed any battery icon again, so why it did when I connected it for the first time? and why when my phone died for the first time red light was blinking, now it doesn't? I want to add that I never dropped my phone or used it in water - never, thats why I was almost sure maybe just battery died after it discharged.
Btw. Important thing is that USB port isn't broken, red light is always ON when I plug USB charger, but when I try to use my magnetic charger, phone never respond - no light. I also tried different cables, chargers etc. Could it really be something with the mainboard?
What could've happen? Why my phone went dead after fully discharged it ? Why battery replacement doesn't fix the problem? I don't get it, is mainboard damaged or something? Can I still try something? Maybe anyone can help me.
Please :/ I cannot afford a new phone right now, really want to try fix it, maybe somehow connecting USB cable straight without usb port can fix it? I heared people do something like this.
Recently got a Pixel 2 and it sometimes has this problem:
* Battery icon indicates that it is charging, even when it is not plugged into anything.
* When it's doing this, if I plug it in, it will not charge (but still indicates that it is charging)
* If I notice this and restart the phone, it resumes working normally.
Anyone else experience this?
Any ideas on a fix?
My Pixel 2 will get stuck at 100% after being charged overnight, under the battery settings it states that the battery information is not available. So far a reboot will fix the problem, I haven't allowed the phone to stay in the 100% state for long without a reboot. Today I'm going to leave it at 100% to see if the phone corrects the issue eventually during the day...report pending.
same. i noticed it today for the first time today. plugged it in (not the charger that came with the phone, one used for my s7 with a usb-c cord) 20 minutes later noticed it hadn't charged any even though it said it was charging, and the level had actually went down. power cycled it, now it's charging again.
I just had that same problem on my pixel 2. A single reboot didn't help, but a second reboot fixed it. Weird....
Same issue. Plugged into car, says charging, levels dropping, even after reboot. Tried different cables and charger, no difference. Wife just walked in and said her Nexus 5 is doing the same thing! HEY GOOGLE, what did you send out to cause this?
This happened to me today too, right before I was going to update to 8.1. Phone said it was charging all day, even though it wasn't plugged in. A reboot didn't fix it. Then tried Turn Off, and it rebooted and now seems fine.
Having this right now. A few reboots and even shutting the phone down hasn't helped so far. Will run the phone empty to see what happens.
Ves said:
Having this right now. A few reboots and even shutting the phone down hasn't helped so far. Will run the phone empty to see what happens.
Click to expand...
Click to collapse
Happens occasionally to me as well. I often disconnect charger from the power rather than pull the charging cable out of the phone first. I wonder if the relatively slow fall in charging voltage when I remove power from the charger makes the problem more likely.
For those who have this problem:
Are you using original charger and cable?
Are you terminating charging by disconnecting power from the charger first, or pulling the cable out the phone whilst power is still on?
Is the phone screen on when you do it?
Anyway, I find a "hold the power key on the phone down for many seconds until it turns off" reboot fixes it until the next time...
1. I was actually using the portable charger that came with my 6P. The Pixel 2 isn't available in the Netherlands as it came with a UK plug.
2. Both methods had the same behaviour. Normally I pull the plug from the socket first before going unplugging it from the phone.
3. 20% of the time the screen is on and the phone unlocked. Most of the times it's just active display.
The phone eventually died despite being plugged in. I started charging again when I used one of the regular chargers (cord not separable). And not it works normally again with the portable charger.
Ves said:
started charging again when I used one of the regular chargers (cord not separable). And not it works normally again with the portable charger.
Click to expand...
Click to collapse
Was this without rebooting the phone? I.e. you fixed the problem just by temporarily plugging in a 'regular' charger?
The phone was dead so I'd consider it a reboot. I left it on the charger to get a full battery again. The problem was gone as I did a check 45 Mon after plugging it in.