Odin H3 - Captivate General

Can someone help me find a version of odin that doesnt have F6 in it I flashed to f6 now im trying to get to H3 but when i use odin it puts f6. And the feilds are greyed out so i cant imput the H3 files.

Monarky said:
Can someone help me find a version of odin that doesnt have F6 in it I flashed to f6 now im trying to get to H3 but when i use odin it puts f6. And the feilds are greyed out so i cant imput the H3 files.
Click to expand...
Click to collapse
Look in the JH2 thread, here it is in post #6...http://forum.xda-developers.com/showthread.php?t=751518

thanks i found it im going to save it this time

Related

samsung showcase HELP!!!

I apologize in advance, since I know people have asked questions similar to this already. But I am desperate for help, as I have been trying to fix my phone for 3 days now, and have not gotten anywhere!!! so here is my story/problem.
I was trying to do an update on my samsung showcase (cspire) using kies, and during the download it was interrupted somehow. The phone was bricked. (i think) so then I found something called one-click unbrick. after that i'm able to put the phone in download or recovery mode.
So i have been trying to get factory rom back on my phone. I downloaded odin3 v1.70 and v1.82 (i have tried both of these) and i have downloaded atlas 2.2 for pit and I have tried both EH09_modem_CS.TAR.MD5 and EI20.tar.md5\EI20.tar.md5. Everytime I do this odin freezes on factoryyfs.rfs.... I have tried all the tricks I can find, different usb port, diff cable, running as admin, i even download sandboxie ( someone suggested that)... I dont know if i am doing something wrong, or if it is odin... Also, i'm not rly sure about the software i'm using... I have very little experience with this kind of stuff, but i am really determined to fix this! please forgive my ignorance! TIA!!
Try flashing a custom rom and boot.img first then Odin back to stock
AshtonTS said:
Try flashing a custom rom and boot.img first then Odin back to stock
Click to expand...
Click to collapse
I've been trying to find one, you don't happen to have a link to where I can find one do you?? Also can i do this using odin, the same way I have been trying to get the stock on there?? Thanks for you help!!

[Q] I need LG P925g Stock rom

Hello,
Recently, i have installed CM7 on my LG P925g and all work perfectly.
But i changed my phone for Samsung Galaxy S2 and i give my old phone for my girlfriend. She doesn't like CM7 and i though it will be more easier for her to get back the Stock rom than CM7.
I did a lot research on the web about this and i can't find anything good.
I find some threads...but with dead links.
Do someone can send me a LG P925g Stock rom that i can flash with CWM with a zip. ?
Or a Backup that i can use with CWM ( zip file )
I hope you could help me please...!!
Michael
Miks1205 said:
Hello,
Recently, i have installed CM7 on my LG P925g and all work perfectly.
But i changed my phone for Samsung Galaxy S2 and i give my old phone for my girlfriend. She doesn't like CM7 and i though it will be more easier for her to get back the Stock rom than CM7.
I did a lot research on the web about this and i can't find anything good.
I find some threads...but with dead links.
Do someone can send me a LG P925g Stock rom that i can flash with CWM with a zip. ?
Or a Backup that i can use with CWM ( zip file )
I hope you could help me please...!!
Michael
Click to expand...
Click to collapse
If i remember correctly you can download and install the lg mobile support tool (http://www.lg.com/us/support-mobile/lg-LGP925G scroll down a bit) write down your imei, (settings>about), then pop out the battery hold volume up and plug the usb cable in, aka download mode, the mobile support tool if you have it running and on the screen will try to look at it don't worry about that, Click on the customer support tab, the bottom item recovery phone, this is where your imei comes in, from there type in the IMEI and check, it should find the stock 20c firmware and from there it may need a few more clicks but you'll restore to stock 20c no custom recovery/root, but completely stock 20c.
Hope it helps, worked for me last time i screwed up lol
I justed registered to say thx!
Same problem here, screwed up and didnt know how to establish a working data connection with the pc..
the hint with the download mode really helped a lot, I didnt know that you had do pop out the battery, hold the volume up button and plug in the usb cable..
You can install any custom rom so there are many ROMs which are very stable and it's like the official rom too much not like the CM7 .. but you MUST do a backup before flash any CWM .zip so how cloud you install CM7 with out do a backup ??
Sent from my LG-P920
OS_Hacking said:
You can install any custom rom so there are many ROMs which are very stable and it's like the official rom too much not like the CM7 .. but you MUST do a backup before flash any CWM .zip so how cloud you install CM7 with out do a backup ??
Sent from my LG-P920
Click to expand...
Click to collapse
I had make a backup before flashing... but now isn't my phone and i don't find my backup... and my girlfriend doesn't like custom rom.
She want a stock rom.
it's why i post on this forum... i hope someone could help me !
Thank in advance and sorry for my poor english.
avengin said:
If i remember correctly you can download and install the lg mobile support tool, write down your imei, (settings>about), then pop out the battery hold volume up and plug the usb cable in, aka download mode, the mobile support tool if you have it running and on the screen will try to look at it don't worry about that, Click on the customer support tab, the bottom item recovery phone, this is where your imei comes in, from there type in the IMEI and check, it should find the stock 20c firmware and from there it may need a few more clicks but you'll restore to stock 20c no custom recovery/root, but completely stock 20c.
Hope it helps, worked for me last time i screwed up lol
Click to expand...
Click to collapse
Thank you so much for your comment, i'll get a try when my girlfriend come at home.
I hope this will be ok !
I have a question, some people said that ghost call happens with v20c.... they suggest to flash with v21e ...
it's a good idea ?
Reverting Back to Stock ROm
After finishing up with LG Mobile Support Tool, the phone starts the phone setup but doesnt go past the wifi. Keeps telling me "Not enough free space, clean up data and try again"
please help me.
zamgill said:
After finishing up with LG Mobile Support Tool, the phone starts the phone setup but doesnt go past the wifi. Keeps telling me "Not enough free space, clean up data and try again"
please help me.
Click to expand...
Click to collapse
Please do a factory reset!
schubeir

[Q] Help with MTK6575 GS3 clone

Hello,
I was trying to install a stock android on my samsung galaxy s3 clone, with MTK6575 as it had a chinese/fake 4.04.
Long story short, I was following this bm smartphonereview guide to with Smart Phone Flash tool and used one of the boot img from colonel zap's blog, and my phone is bricked.
I can get into download mode but not more than that. The Smart Phone Flash Tool recognizes my phone, and I've been trying to flash different boot.img and different preloaders and recovery files but it hasn't helped.
I'd appreciate any tips as I would like to not have a $200 paperweight.
edit: I flashed it with this: http://forum.xda-developers.com/showthread.php?p=32468798
edit 3: I found this http://www.movilesdualsim.com/foro/threads/14127-(Ayuda-ROOT)-GT-I9300-android-(clone)/page5 the gguy posted his stock roms. However now the SP flash tool says, "cannot pass bootrom start command" and exits.
Thanks!
Anyone?
mpness said:
Anyone?
Click to expand...
Click to collapse
umm next time dont try it? lol
Well in case anyone is in my situation, I couldn't figure it out. I got rid of it

[Help]Unroot and go back to original

Hi,
I have been searching and couldnt find what im looking for. After i rooted my P920 and installed Cyanogenmod 10.1 Android 4.1.2 (LONG journey with brick and unbrick disaster). I noticed that display and touch and internal storage is not working properly....so i really want to return to as it was unrooted with LG stock ROM (Swedish) Gingerbread 2.3.5...but i cant seem to find a way to do this.....could anyone please be nice and help or point me to right direction....?
bigx86 said:
Hi,
I have been searching and couldnt find what im looking for. After i rooted my P920 and installed Cyanogenmod 10.1 Android 4.1.2 (LONG journey with brick and unbrick disaster). I noticed that display and touch and internal storage is not working properly....so i really want to return to as it was unrooted with LG stock ROM (Swedish) Gingerbread 2.3.5...but i cant seem to find a way to do this.....could anyone please be nice and help or point me to right direction....?
Click to expand...
Click to collapse
This is the tutorial you musto follow:
http://forum.xda-developers.com/showthread.php?t=1942836
When choosing KDZ file, use the latest for your country, from here:
http://lg-phone-firmware.com/index.php?id_mod=2
PS: Just noticed there is no Sweden ROM there, just use EUROPE OPEN.
Ok I have done this..but it installed CWM recovery and also in Android Gingerbread it gives me 0 mb internal storage, even after factory reset and storage format...
Whats the diffrence between a .kdz and a bin file? I downloaded a kdz file from ur second link but in the unbrick method in the first link its all about bin files..
bigx86 said:
Whats the diffrence between a .kdz and a bin file? I downloaded a kdz file from ur second link but in the unbrick method in the first link its all about bin files..
Click to expand...
Click to collapse
A KDZ file includes a rom (BIN file) and a baseband (FLS file).
If you flash a rom (BIN file), you will need to also flash a compatible baseband (FLS file).
My phone is stuck in a bootloop with LG logo and LG animation...i try to enter the Recovery with 3D+Volume down and Power button until vibration....but nothing is happening....only LG logo appears then dissappears----
Now it entered. But there was no vibration and i needed to press volume up or down for the screen to appear....strange :S
AW: [Help]Unroot and go back to original
Hey, try this tutorial with flashtool its very easy, you have to flash the kdz you find everything here
http://forum.xda-developers.com/showthread.php?t=1540163
Good luck
Sent from my LG-SU760 using xda app-developers app

HELP PLEASE... GALAXY TAB P6200 Softbrick

Anyone there who could help... I've been get hype when i receive my first android device (galaxy tab P6200) so i search for tutorial on how to root and flash new firmawre.. i did everything in the tutorial but suddenly.. odin has stop working. when i boot my P6200 it turns out to be softbrick.. sorry i'am kinda new on android scene i've been on ios scene before o didn't think it would be harder to find a solution on android... ive spent 2 straight days finding downloading firmware ive even search xda for this matter but no luck... i can still access download mode but odin and Heimdall still give me such error that prevents me to fix my device... i'am kinda losing hope so i try to post here to see if its still a chance for me to recover my softbrick device... hope someone could help... insanely beggin....:crying:
userpjay said:
Anyone there who could help... I've been get hype when i receive my first android device (galaxy tab P6200) so i search for tutorial on how to root and flash new firmawre.. i did everything in the tutorial but suddenly.. odin has stop working. when i boot my P6200 it turns out to be softbrick.. sorry i'am kinda new on android scene i've been on ios scene before o didn't think it would be harder to find a solution on android... ive spent 2 straight days finding downloading firmware ive even search xda for this matter but no luck... i can still access download mode but odin and Heimdall still give me such error that prevents me to fix my device... i'am kinda losing hope so i try to post here to see if its still a chance for me to recover my softbrick device... hope someone could help... insanely beggin....:crying:
Click to expand...
Click to collapse
Need more info, exact model number firmware you were on, firmware file you were tryimg to flash, did you check, or uncheck anything in Odin? Download mode is good, you should be OK.
How do you know its softbrick? Bootloop, hang at logo? Which one?, as much data as possible will get you fixed faster.
I had same problem. You need a PIT file for p6200 and use it in odin together with the newest firmware from sammobile.com.
It works for me.
nabile said:
I had same problem. You need a PIT file for p6200 and use it in odin together with the newest firmware from sammobile.com.
It works for me.
Click to expand...
Click to collapse
I have limited knowledge on flashing, but as far as I know, If u r using a 'PIT' file, be sure to check on 'Repartition' Option in Odin (while flashing). If u Flash wid ONLY a md5 file, ensure that 'Re Partition' box is unchecked while flashing. May be u kept Repartition checked while you were not using a PIT file or vice versa.
If that is d case, try flashing again by following a correct process.

Categories

Resources