cant update to cupcake after DREAIMG, help - G1 Android Development

first and foremost am sorry for posting this here, am giving away my phone so thought i would unroot it and leave it with factory firware. i flashed the dreaimg just fine but when i do the update.zip and the phone reboots twice, it stays on the g1 screen. i tried differed dreaimg and updates like - signed-kila-ota-148830.de6a94ca.zip and the one found in theunlokr, but it still stays on the g1 screen. If i dont flash the update i can boot into the rc29 firware just fine, thanks in advance.
I was using r radio 2_22_23_02, spl 1.33.2005, superE 1.0.3
after DREAIMG.nbh radio: 1.22.12.19, spl: 0.95.0000
after update.zip radio: 2.22.19.26I spl: 0.95.0000

still trying to figure this out...
RC29 - RC33 - ok
RC33 - CupCake - Freeze @ G1 screen....
any help is apreciated.

I left my phone alone for a few hours with RC33 to get the 1.5 update OTA, got it but phone froze @ g1 screen again... any info on this? anything else i can do? thanks.

http://www.talkandroid.com/959-android-dev-phone-cupcake-update/
Look down in the comments section about losing root. Just browsing through the forums and came across you post...not sure if this is the exact solution you need given your situation but I hope it helps.

well what i was trying to do is to unroot the phone, but after so many tests the phone will always stop at the G1 screen. I managed to get root back from RC29 and get back to superE. But not sure whats wrong with my phone, i noticed that some of the roms i flash will also stop at the G1 screen..... any idea whats the problem?
so far i've only tested 2 froyo roms and 3 donut.
superfly 1.3 - stop at boot
biffmod v6 - working
super D 1.9.3wesgarner - stop at g1 screen
super D 1.11 - working
superfast 1.3.3 - stop at g1 screen
i started noticing some roms will work and some would at g1 screen even before i tried to unroot my phone. I flashed succesfuly all donut roms mentioned before this problem started.
my phone: T-Mobile G1
radio : 2.22.23.02
spl : 1.33.2005
recovery : amon-ra- 1.7.0
my wipe method is, in recovery wipe all 5 > repair ext > fastboot erase system -w
not sure if am doing something wrong or why my phone not loading certain roms, please help.

Related

From JF 1.42 RC33 to JF 1.5 [mission imposible]

Hi!
I have JF 1.42 RC 33 with root enabled on my G1 from polish network Era.
Then I've decided to switch to JF 1.5 ADP, so first I've installed radio update from htc web page and after this i 've installed 1.5. After succesfull instalation my phone restarts after few minutes and loops on android logo. It is immposible to switch it off. I can only take off battery. Only way to use it once again is to go to recovery mode, then wipe it, and install JF 1.5 one more time. But after this my phone once again is working till first reboot. I've tryied JF 1.5, the Dudes and Hayakuro updatesl but it is same situation. Reboot and loop on android logo.
Now I have JF 1.43 RC9 and new radio 2.22. I've also tryied to install one more time radio update and JF 1.5 update, but it doesn't help. What elsa I can do?
Also I have newest version on Hard SPL. But I did't changed it since I've rooted phone.
szymarek said:
Hi!
I have JF 1.42 RC 33 with root enabled on my G1 from polish network Era.
Then I've decided to switch to JF 1.5 ADP, so first I've installed radio update from htc web page and after this i 've installed 1.5. After succesfull instalation my phone restarts after few minutes and loops on android logo. It is immposible to switch it off. I can only take off battery. Only way to use it once again is to go to recovery mode, then wipe it, and install JF 1.5 one more time. But after this my phone once again is working till first reboot. I've tryied JF 1.5, the Dudes and Hayakuro updatesl but it is same situation. Reboot and loop on android logo.
Now I have JF 1.43 RC9 and new radio 2.22. I've also tryied to install one more time radio update and JF 1.5 update, but it doesn't help. What elsa I can do?
Also I have newest version on Hard SPL. But I did't changed it since I've rooted phone.
Click to expand...
Click to collapse
There are actually a few threads for people running into issues including myself. Mine turned out to be an issue form apps2sd that I have in my thread
http://forum.xda-developers.com/showthread.php?t=511709
There is also http://forum.xda-developers.com/showthread.php?p=3731933
and http://forum.xda-developers.com/showthread.php?t=511955

Android or WM ? I'm lost ??

I have a G1 that I tried to root and mod. Using the the downgrade method to RC29. I've been reading and waiting untill I felt comfortable trying to mod it. When the one click method came out I ordered my 8gb class 6 sd card. By the time it came, the hole was patched. So got rc29 and Cy recovery1.4 did the telnet and got root. When I went to recovery it was Android Recovery not Cy. Even though I had Nandroid b/u 2.2 and it said Zen's recovery build. I did this 3 times with same results. Next I went to drizzy hero full rom. It said to update radio and spl using a link on the page. The link took me to haykuro's radio and hard slp. Installed the radio first (using the update.zip) then the spl. The radio worked, the spl has me stuck on the G1 screen. I've tried everything that I can think of.
Now I slipped my sim into a my touch 2 pro. Is it me or is this what Ive been tring to get all along. This phone is SWEET!! Plus I've been seeing more upgrades and stuff for WM than Android lately. I'm no dev, obvioulsy my G1 is prob. bricked, but it sure seems like you can do almost anything with WM that you can with Android. Except change O/S. My mind is open on any opinions or ideas. (still like to fix G1) (mt2p is still on 6.1, should I upgrade?)

[rooted G1]Stuck on Jf 1.43, how can i get to another rom like hero or 2.0?

I rooted my G1 and went from rc-29 to Jf 1.43 Holiday[http://jf.andblogs.net/2009/02/11/jfv143/] and everything works but i want to move on to hero or 2.0 or maybe motoblur or something. any rom i try to load the same way i got to "holiday" sends my phone into a never ending loop or sits @ the g1 screen so i just go back to the jf rom and wipe and reload it....can anyone help me? im not able to find any info on how to downgrade from a jf or move to a different rom.
MaysDroid said:
I rooted my G1 and went from rc-29 to Jf 1.43 Holiday[http://jf.andblogs.net/2009/02/11/jfv143/] and everything works but i want to move on to hero or 2.0 or maybe motoblur or something. any rom i try to load the same way i got to "holiday" sends my phone into a never ending loop or sits @ the g1 screen so i just go back to the jf rom and wipe and reload it....can anyone help me? im not able to find any info on how to downgrade from a jf or move to a different rom.
Click to expand...
Click to collapse
There is a great guide over at http://wiki.cyanogenmod.com, but for the upgrade from jf is easy just follow the instruction's over here at http://wiki.cyanogenmod.com/index.php/How_to_upgrade_from_JesusFreke_1.5. Hope this helps.
sweet that worked!! running cyangn 4.1.9999 or sumthing now and its great!! the cyanogen wiki was perfect!

questions about the perfected SPL and custom roms

so i have a mytouch 3g with the perfected SPL (i believe ... says HBOOT-1.33.0006 when I check the version with back+power) and I've been using AmonRa's 1.6.2 rom for quite some time now.
I have been looking to upgrade to the Eclair roms floating around the forums which states that it requires a newer SPL so I downloaded the Engineering SPL 1.33.2010 along with the new rom
My question is (after some research) can i just boot into recovery mode and flash the new SPL that way? or is the only way the goldcard way?
You can just flash from the recovery images, but make sure the spl is completed and then he upgrade let me know how it goes
thanks, i'll give it a go and hope it doesn't brick
OK so i got the ENG SPL to install with no problems, but I can't get the rom to install
i'm trying to use Eugene's v2.3 rom found here http://alldroid.org/viewtopic.php?f=130&t=515
it flashes, says install complete, but upon reboot, it loads the mytouch splash page, then about a minute or 2 later, it loads this strange screen with colors that form an X in the middle of the screen and keeps doing that ... i've never seen that before so I flashed back to the 1.6.2 ion rom i used prior
anyone have any ideas?
thats the boot screen...the first time i got it I had to wait 45min for it to finish loading the rom....restarts (after first boot) are quicker....just be patient...I suggest flashing + rebooting then going to sleep...wake up in the morn...if its still going then u have a prob.
This is the screen ur getting right?
http://www.youtube.com/watch?v=lAFSEsEZnnE&feature=player_embedded
yeah, tahts the screen...scared the crap out of me...doesn't make any sense to use an "X" as the boot screen as "X"s are a negative symbol ... i did wait it out, however, took about 5 minutes, but it worked!
I am now running on the 1.33.2010 ENG SPL with eugene's 2.1 rom and it is quite flawless (minus the fact that there's no camera). Hope the camera fix comes out soon!

[Q] help - Botched rom upgrade

Hey all,
kinda new here and hope you guys can help me out.
So i just got this brand new out-of-the-box vodafone htc magic (32a)
It came with 1.5 and of course i decided i had to mess with it.
I tried installing a different rom from the original one, before that i installed the latest from RA recovery (1.70) i belive.
Problem is that atm every rom that i try to install seems to:
a: cant boot (stuck on the vodafone logo for over 20 mins)
b: says cant install (gives out some error mid instalation)
and of course i cant go back into my original factory software.
some info on the magic:
Radio - 3.22
Shapphire 32a
cpld - 12
Help please?
nvm ended up figuring out for myself (best way) had to upgrade everything for roms to work....idiot me
oh and sorry for posting in the wrong section.
Thanks for your time
L

Categories

Resources