Related
Hello,
is there a way to use the VoIP WM6 embedded client with this smartphone? It seems that WM6 Standard (smartphone edition) does not come with VoIP support default. Does anyone know of a way to install VoIP client that comes with the PDA-version of WM6 (WM6 Professional)?
Thanks a lot, an answer would save me a lot of troubles,
Ionut
me to ...
Anyjoy anybody ??
have you tried to copy the relevant files?
which are mentioned int thread: {SOLVED} How to configure VoIP/SIP client in WM6.
in the \Windows directory:
*
* ipdialplan.xml
* dnsapi.dll
* voipphonecanvas.dll
* rtcdll.dll
or checked the registry, for any voip relevant entries,
maybe you only will have to set a registry and than it might work (e.g. like the gps component)
but i dont have a vox yet, im only guessing.
I think that vox doesnt support voip doesnt mean wm 6 standard doesnt support voip, it may mean that htc did not include the voip component.
other wm 6 standard smartphones might have it in the future.
its a posting related to the ppc version (since wm6 its called professional), i read that it should work properly even with a 200mhz wizard
http://forum.xda-developers.com/showthread.php?t=299950
it shouldn't have been removed from the standard (smartphone version)
regards
IRM
Some info on this:
I have used the WM6VoIP.cab posted here: http://forum.xda-developers.com/showthread.php?t=303558 - post nr. 2, and although at the beginning it looked like nothing happened, after changing the Home default view (start/settings/home screen) to something else (not sure what i did and dont have the VOX anymore), Internet Calling appeared as a plugin.
Hope this helps anybody...
ionutz6 said:
Some info on this:
I have used the WM6VoIP.cab posted here: http://forum.xda-developers.com/showthread.php?t=303558 - post nr. 2, and although at the beginning it looked like nothing happened, after changing the Home default view (start/settings/home screen) to something else (not sure what i did and dont have the VOX anymore), Internet Calling appeared as a plugin.
Hope this helps anybody...
Click to expand...
Click to collapse
forgot to mention that I setup the VoIP settings and used it and it works flawlessly. The only problem is that the sound goes in the back and not the earpiece, but this is smth that we should still investigate.
I've added some instructions to the VOX wiki. Maybe some find it usefull and could expand it regarding the IPDialplan.xml (A non VOX but WM6 specific topic on that would sure be helpful).
http://wiki.xda-developers.com/index.php?pagename=HTC_Vox
great stuff ... up and working ... Htcs710 ... all we need to do now is sort out the issue with the sound coming out of the back .. and clues or pointers ??
tim
Has anybody any ideas how to get the sound to come out of the front instead of the speakerphone ?
timo75 said:
Has anybody any ideas how to get the sound to come out of the front instead of the speakerphone ?
Click to expand...
Click to collapse
Not sure yet and I am in desperate need of a solution. I will try to find out some more reading other threads about the VoIP settings here at xdadev. In case any of you finds a way to make the sound go in the front earpiece for this type of smartphone, pls email me at ionutz (at) pdamobile.ro.
Thanks a bunch!
Hi there.
Although the phone somehow registers to the VOIP service, I always get a "Network Error" when I try to place a call.
Could be provider dependant, maybe with some others it works...
Anyhow, just to let me understant, would you mind posting the name of your provider (or PM it to me if against the rules) so that I check with them?
Other thing, your today plugin stays as well on "Searching", right?
Thanks,
Ka.
Hi,
Regarding the the sound coming out of the back of the phone instead of the front, it is also happening to me with Skype so that may indicate it is something to do with the way the handset is setup by default and not the SIP add-in, maybe a registry setting.
Hi
Anyone found a solution to the VoIP sound coming out the speaker rather than the earpiece?
Regards
Phil
does it work over cdma without wifi
ionutz6 said:
forgot to mention that I setup the VoIP settings and used it and it works flawlessly. The only problem is that the sound goes in the back and not the earpiece, but this is smth that we should still investigate.
Click to expand...
Click to collapse
does it work on cdma without wifi
Hi Folks,
its been an awesome time for me and my german o2 tornado (xda phone) since the wm6 rom releases.
seriously, didnt expact that few bugs and problems
but i've got 2 questions that, if answered, would make the roms (almost) perfect for me:
1. any chage to change the language of voice command?
Its not a problem for me to say "appointment" or "at work" but the german names are a bit funny to pronounce in english (my brother Tobias is called Toe-be-us for example)
2. live messenger has some really nice gimmicks, for example sending pictures. but against the wm5 version chosing the camera symbol doesnt start the nice new camera software but some kind of camera inside the pictures and videos application. know what i mean? how can i link the camera symbol to the camera.exe?
Had to change from 3 problems to 2 cause i solved one myself (application buttons)
Anyone ideas about the other 2?
Thanxs to anyone who improves the nice little smartphones..
N8falke said:
1. any chage to change the language of voice command?
Its not a problem for me to say "appointment" or "at work" but the german names are a bit funny to pronounce in english (my brother Tobias is called Toe-be-us for example)
Click to expand...
Click to collapse
I would love to have voice command in my own language but I am not brave enough to assume microsoft is working on alternative languages right now. It is not like changing the interface language. You must almost start from scratch for each additional language. Still, german may have a chance. did you check the microsoft web page? maybe they have some information there.
Ad 1. I am pretty sure it is not possible. I have to use Polish Vista bundled with my laptop The operating system is localised but the voice command of the OS is not. Exactly the same with opera browser. If desktop operating system do not support other languages natively I would not count on the portable ones.
Perhaps you can help
I downloadd the official rom from HTC for my Tytn. I reinstalled favorite program Microsoft Voice Command 1.6. Everything works perfectly except for the incoming notification CID. I have set VC to announe incoming calls through the speaker. I do not use any Bluetooth headsets. Are there any tweaks or patches available. thanks
How to add the “Voice Edition” item into Contact Menu for voice record?
Microsoft_Voice_Command_US_SP_1.60 seems to work under WM6 (now ROM for tornado dopod Asia WWE ) with my Qtek8310, but I can’t manage to add the “Voice Edition” item into Contact Menu for voice record.
Any idea?
Anyone have the German resources for MS Voice command?
janp said:
Microsoft_Voice_Command_US_SP_1.60 seems to work under WM6 (now ROM for tornado dopod Asia WWE ) with my Qtek8310, but I can’t manage to add the “Voice Edition” item into Contact Menu for voice record.
Any idea?
Click to expand...
Click to collapse
Can you explain this? What does Voice Command have to do with recording? I dont see any use of a Voice Command menu item as it works without any neccessary recording for each contact.
And again: anyone ideas how to change language to recognize german phonemes?
Have to bring my question more on top again.. sorry for pushin another thread on page 2 though..
Is MS Voice Control part of WM6 or still separate program. If so, how did Phil integrate it to his ROM? Can i do the same with a german version?
Any clues? german voice recognition would be so great for me and i guess all the other krauts in here
I just installed MsVoiceCommand FR SP60,
There was an error at the end of the installer.
BUT it works ! Now my WWE WM6 ROM speaks French
Please can you put a link for MsVoiceCommand FR SP60
i would love a link for this FR version too, i'm having a hard time with mine currently
tks
hi,
just saw this software that will be available for wm6.5.
its a voice activating software (sent texts, make calls etc with voice commands)
www.tellme.com
i think its a sub company of microsoft making it.
it says its going to be available through wm marketplace for wm6.5 phones, but cant see why it wont run on other wm OS's.
anyone got a beta of the software? or any other info
Nice site.. Lets wait and see how nice the program would be..
How it is different from MS Voice Command ?
bogdatov said:
How it is different from MS Voice Command ?
Click to expand...
Click to collapse
you can search the net for items and places with a voice command (eg. starbucks or ipod etc)
u can also write texts and send them using your voice.
i think it is the evolution if the ms voice command software (microsoft trying to interwine software together and changing the name so that it seems like something fresh and new).
bogdatov said:
How it is different from MS Voice Command ?
Click to expand...
Click to collapse
Read the link it does all that and more.
Are MS ever going to release this then?
TellMe was (I believe) a separate company working on this snazzy voice control software, and I believe MS snatched them up to use as a replacement for MSVC going forward.
"Tellme" is certainly a snappier name than "Microsoft Voice Command." It actually looks like Tellme combines MSVC with the voice controls of the Bing app. I wonder how much overlap there will be.
Tell Me is part of the Samsung Intrepid WM 6.5 ROM. Would be great to be able to install that on my phone. Anyone up for the challenge?
hmmm would really like to install this... any1 with an interprid that would let someone here get the app. dont kno how its done but im sure the smart guys here do
shappy0869 said:
Tell Me is part of the Samsung Intrepid WM 6.5 ROM. Would be great to be able to install that on my phone. Anyone up for the challenge?
Click to expand...
Click to collapse
Ditto.
Would love to get my hands on that cab.
TellMe
Tellme's primary business is in enterprise IVR systems and Voice enabled CRM and such. The TellMe Mobile apps including the WN6.5 client and the BB client as well at the 555-tell all agregate the voice samples collected during use to make the voice recognition part of their software more acurate and reduce the need for programming.
Seems pretty ingenious and gives Tellme a huge chance to be a great voice app unlike some apps that leave me screaming at my phone like some crazed person. While it again dials some completely random number from my phone book.
I hope that this exclusivity for the intrepid is short lived.
mrudzik said:
Tellme's primary business is in enterprise IVR systems and Voice enabled CRM and such. The TellMe Mobile apps including the WN6.5 client and the BB client as well at the 555-tell all agregate the voice samples collected during use to make the voice recognition part of their software more acurate and reduce the need for programming.
Seems pretty ingenious and gives Tellme a huge chance to be a great voice app unlike some apps that leave me screaming at my phone like some crazed person. While it again dials some completely random number from my phone book.
I hope that this exclusivity for the intrepid is short lived.
Click to expand...
Click to collapse
So, do you have a link for the cab or not?
Hamidxa said:
So, do you have a link for the cab or not?
Click to expand...
Click to collapse
Dont I wish....so for just reading the site abunch goping for someone with access to the right phone.
on a seperate note all these exlusive deals tick me off. They should just post the app in marketplace and be done with it.
All we need is a ROM dump from the interpid, and we should be able to pull it out and create a cab. However, the phone isn't available yet so we will have to wait a bit longer.
Someone with a Samsung Intrepid needs to port it for us.
yes please
You can get it now, well according to their site, however Im in the uk and thus I dont think i will work for me!....
http://www.tellme.com/you/get
How frickin' insulting!!! Right now, on AT&T, T-Mobile & Verizon it's only available on Blackberry devices! And on Sprint, it's all Blackberry except for one WM device - the Intrepid!
WTF, Microsoft?!
Package here.It doesn't understand a touch screen, but it seems to work.
Hey guys, since I'm such a 1337 H4x0r I managed reverse engineer the installer from PPCGeeks to find out where the installer got the .cab from. Well, it paid off and I found the .cab straight from the site, and you can download it from: http://m.tellme.com/windows_mobile/TellmeSamsungIntrepid3515.cab. It still doesn't work on my Rhodium, but I figured I'd post this anyway, so you don't have to go to download from PPCGeeks or if you wanted a .cab file instead of the installer.
NEW IMPROVED cab. Click HERE
*********
WM6.5 Only
*********
7 cabs for different tastes.
Tested and working on HD2 with no problem with good sound. It`s best to install on fresh OS. First install any of the "Ear/VoIP"(to enable native voip) cabs then install WOW HD included in attachment for louder sound and set all values to 100% except first one(srs 3d). Port 5060 enabled by default(make sure forward 5060 port in router for (possible) 2 way communication.
Please leave your Comments/Suggestions.
All credit goes to developers who invested thier time and effort to develop these programes, I was just able to combine them and made cabs + did some extra setting over 3 year period, as i have gained knowledge on this subject. These cabs are based on G.711 codec, so bit hungry on network. I advise to use these cabs on WLan with good reception.
Thanks.
09-05-2010
* Microsoft bug fixed found in all these cabs
++++++++++++++++++++++++++
sip/voip = native voip support + config tool
Wlan = Wireless always on
Ear = Sound comes out from earpiece
Dial = Dial Plan (doesn`t work)
Reg = PHM Registry editor
SRS =Increase Volume(louder)
+++refer attached files below++++
Thanks very much!
Tested and working
nathanpc said:
Thanks very much!
Tested and working
Click to expand...
Click to collapse
i can only receive incoming calls out going call is not working. where could i go wrong any help
shah_vm said:
i can only receive incoming calls out going call is not working. where could i go wrong any help
Click to expand...
Click to collapse
hi shah, I am in process of making new voip cab based on g711 codec with volume increase inbuilt plus 5060 port forward enabled by default. I will upload with in a week, are you using 6.1 or 6.5.
Reason for voice problem would be your ISP or Mobile carrier blocking packets.
Create Dialplan
Hi,
installing the cab was easy going but i am struggling with the configuration...
When i use the "create dialplan" tool, enter my configs and afterwards hit the "create" button it tells me that everything's fine. But where can i find this dialplan? I expected some file in the directory of the config tool or at least something on the dialplan tab in the config tool...
I tried several times (of course with reset afterwards) but always the same -- my configurations seemed to be lost.
What am i doing wrong?
Is the provider (t-mobile in my case) capable to lock the WM6.5 VoIP feature?
I have already tried several other solutions (fring and other softphones) without success...
BTW: if everything works what happens? How could i see that VoIP is active?
Thanks!!
Joerg
VOIP Almost working
Thanks for the Cabs. I was able to get Internet Dailing set up on my FUZE w/ stock 6.5ROM. I did the SIP provisioning with my provider and I can receive calls now. But, when I dial, I see that a "9" is automatically entered in front of the number I'm dialing which doesn't allow my SIP SIPsorcery/Sipgate dial plan to dial the number correctly. How can I fix this?
Modify DialPlan
forepj said:
Thanks for the Cabs. I was able to get Internet Dailing set up on my FUZE w/ stock 6.5ROM. I did the SIP provisioning with my provider and I can receive calls now. But, when I dial, I see that a "9" is automatically entered in front of the number I'm dialing which doesn't allow my SIP SIPsorcery/Sipgate dial plan to dial the number correctly. How can I fix this?
Click to expand...
Click to collapse
*****************************************************
Play with DialPlan according to your country code, area code. Otherwise try cab without DialPlan. See if it works. Thanks
*****************************************************
I am new. This is a test.
Windows 6.5
Looks like the files haven't been updated yet? Were these going to be put in a new thread?
Hi,
any screenshots and has anyone tested this in WM6.5.x?
thanks
This Ip Dial Plan Creator works. Credits to the author Jaap De-Wolff. It is the best i have found to set up VOIP.
I use the attached files to install Native VOIP in to all my WM phones and currently working great on my 6.5.5 ROM from Dutty HG_11.
Also the attached AutoAudioRoute (Credits to oruam57) which routes the audio to the earpiece for both VOIP and SKYPE calls. You need to first install AudioRoute 1.2.020 from Teksoft then delete the AudioRoute link file from the Start Up folder before installing this CAB.
Link to the thread in signature below.
I will like to check out your Ear Cab to see how it works and report back.
EDIT: I checked your CAB files (VoipEar & VoipDialEar) and found that you have an error in the .inf files with the regedit line:
reg_path18 = Software\Microsost\Today\Items\Internet Calling
It should read "Microsoft" rather than "Microsost"
Thanks for reporting this bug
----------------------------
will correct this today. Thanks
----------------------------
angusc said:
This Ip Dial Plan Creator works. Credits to the author Jaap De-Wolff. It is the best i have found to set up VOIP.
I use the attached files to install Native VOIP in to all my WM phones and currently working great on my 6.5.5 ROM from Dutty HG_11.
Also the attached AutoAudioRoute (Credits to oruam57) which routes the audio to the earpiece for both VOIP and SKYPE calls. You need to first install AudioRoute 1.2.020 from Teksoft then delete the AudioRoute link file from the Start Up folder before installing this CAB.
Link to the thread in signature below.
I will like to check out your Ear Cab to see how it works and report back.
EDIT: I checked your CAB files (VoipEar & VoipDialEar) and found that you have an error in the .inf files with the regedit line:
reg_path18 = Software\Microsost\Today\Items\Internet Calling
It should read "Microsoft" rather than "Microsost"
Click to expand...
Click to collapse
DONE
All good now
dhillonbros said:
----------------------------
will correct this today. Thanks
----------------------------
Click to expand...
Click to collapse
Doens't work on my Samsung GT-B7620 Windows Mobile 6.5.
Can you please post an instruction?
dimabelikov said:
Doens't work on my Samsung GT-B7620 Windows Mobile 6.5.
Can you please post an instruction?
Click to expand...
Click to collapse
If u want help you need to give a bit more details of your issues. Which CABs have you installed and what exactly are yout issues / symptoms?
angusc said:
This Ip Dial Plan Creator works. Credits to the author Jaap De-Wolff. It is the best i have found to set up VOIP.
I use the attached files to install Native VOIP in to all my WM phones and currently working great on my 6.5.5 ROM from Dutty HG_11.
Also the attached AutoAudioRoute (Credits to oruam57) which routes the audio to the earpiece for both VOIP and SKYPE calls. You need to first install AudioRoute 1.2.020 from Teksoft then delete the AudioRoute link file from the Start Up folder before installing this CAB.
Link to the thread in signature below.
I will like to check out your Ear Cab to see how it works and report back.
EDIT: I checked your CAB files (VoipEar & VoipDialEar) and found that you have an error in the .inf files with the regedit line:
reg_path18 = Software\Microsost\Today\Items\Internet Calling
It should read "Microsoft" rather than "Microsost"
Click to expand...
Click to collapse
when you say 'native' does this make voip the default dialer?
is it capable of switching back to normal radio?
how does it work
thanks for any insight
eigerzoom said:
when you say 'native' does this make voip the default dialer?
is it capable of switching back to normal radio?
how does it work
thanks for any insight
Click to expand...
Click to collapse
By Native i mean it is the "built in" Windows mobile VOIP version rather than a 3rd party installed "soft phone". Your Call carrier will always be the default phone service provider.
On the today screen, once you have installed the CAB file and registered with a VOIP service provider and filled in the SIP Configuration, you will see a line on your Today screen (if you have disabled Manila and gone back to the original WM Today screen. This will show your SIP provider and status:
SipDiscount: Available
OR
SipDiscount: Selected
Only when in the SELECTED mode will your phone dial out on the VOIP service otherwise all calls will go out on the Mobile carrier. You will be able to receive VOIP calls when ever "Available" or "Selected" are the display mode.
I only really use VOIP for making calls overseas as it is much cheaper than even using SKYPE for calling out to land lines or Mobiles Internationally.
thanks for quick clear reply
sounds good
here's the teksoft download link
http://www.teksoftco.com/storage/download.php?product=audioroute_ppc
finally it worked for me. thanks dillionbros.
WM6.1, SIP available but not selected
Hi,
I'm trying to use WM6.1 SIP instead of fring with which I've no problem to make SIP calls.
When using the WM6.1 SIP soft and SIP config Tool, I manage to set my account, I see my SIP provider available in the today screen, but I cannot select it. When clicking on available, I go to the phone settings but the status remains available (instead of selected) and my calls use GSM.
Does somebody knows how to fix that problem ?
My PDA is an AIRIS T483 with WM6.1 and up to know I had no problem when installing and using pocket PC softs !
Thank's in advance !
Is there an application that is similar to Google's voice actions application, but offline, for when I don't have service?
bikcmp said:
Is there an application that is similar to Google's voice actions application, but offline, for when I don't have service?
Click to expand...
Click to collapse
did you find the application? i know there is one, but i cant find it now. been searching for almost an hour! if you find it pls pm me
Voice command was the selling point to me and I was really shocked to know it required internet connection to work..Do I really need internet to say “”hey Galaxy..call wife mobile” ???? This is ridicules GOOGLE.
Such a nice device and very $$$$$ and they screw up like that
Vlingo
Hello girls and boys,
Like you, I was yesterday looking for this frantically as I have just got an Android device as my work mobile and have an old Windows Mobile 6.5 phone (Touch Pro2) as my personal mobile which runs Microsoft Voice Command 1.6 and can do quite a bit without needing to touch the handset (illegal whilst driving in the UK). I have to say; I was finding it difficult to believe that with all the awesome power of a Desire S when compared to the TP2, why is it I can't find an offline voice command application? Google's Actions are great yes, but does it REALLY need server side processing for these commands? I then came across a forum where someone suggested Vlingo and no-one really acknowledged the post. What a great app! Totally free, works with bluetooth headsets and actually does speech to text as well WITHOUT needing to be online.
I suggest you guys take a look as it seems to be a great piece of software that's pretty well written. http://www.vlingo.com
berabi said:
Hello girls and boys,
Like you, I was yesterday looking for this frantically as I have just got an Android device as my work mobile and have an old Windows Mobile 6.5 phone (Touch Pro2) as my personal mobile which runs Microsoft Voice Command 1.6 and can do quite a bit without needing to touch the handset (illegal whilst driving in the UK). I have to say; I was finding it difficult to believe that with all the awesome power of a Desire S when compared to the TP2, why is it I can't find an offline voice command application? Google's Actions are great yes, but does it REALLY need server side processing for these commands? I then came across a forum where someone suggested Vlingo and no-one really acknowledged the post. What a great app! Totally free, works with bluetooth headsets and actually does speech to text as well WITHOUT needing to be online.
I suggest you guys take a look as it seems to be a great piece of software that's pretty well written. http://www.vlingo.com
Click to expand...
Click to collapse
Thanks bro for your help but unfortunately even vlingo now requires internet connection.
http://swathiep.blogspot.com/2011/02/offline-speech-recognition-with.html
this can work but i dont have linux and a can not complime it.. i believe somebodywill make a apk file and i can install it
Cyberon voice commander
No internet needed, according to this
https://market.android.com/details?id=com.cyberon.cvc.AME&hl=en
Also check out: "command this" app
Good luck
Sent from my HERO200 using Tapatalk
voice commands?
there's an offline speech in the 4seassons rom, that worked ...
but i'm not able to use it in others roms ..no idea what ...
did anyone try it out?
i used to use Cyberon Voice Commander, recorder my voice and i could assign it to open applications or dial friends. its not free though...
VoiceButton works offline
bikcmp said:
Is there an application that is similar to Google's voice actions application, but offline, for when I don't have service?
Click to expand...
Click to collapse
You can try my app. It works offline. Application is named VoiceButton. You can find it in GooglePlay.
I think this is what you need.