Allow PPC device to "see" only GPRS service? - General Questions and Answers

I have quite weak network signal in my office and I've noticed that signal strength is lower when my Acer E101 finds EDGE service available, while it is higher with GPRS (at least, when taskbar icon E turns to G, signal rises) at the same place. So I was wondering whether it is possible to make phone "see" only GPRS service somehow?

Related

3G/HSDPA traffic while connected via WIFI

It looks like my TC is using HSDPA network (about 100k/hour) even during the time I am connected via wifi. Is that a normal behaviour, or can I force it to automatically disconnect HSDPA while using wifi?
It depends on how you setup your routing.
If you have your wifi network set as your "work / business" network and hsdpa as your internet access. It'll ofcourse route all trafic over hsdpa.
Check your wifi connection and set the appropriate network type. This setting is done for every access point. It's not a global wifi setting afaik.
The wifi connection is setup as internet, so that is not the problem.
What I find is that both wifi and 3g are active. I can turn off 3g by turning off data connection in the comm manager, leaving me with the sole wifi connection (and internet access of course). However, as soon as the TC goes to sleep it will come back with both 3g and wifi. What I found also is that it is quicker to initialise the HSDPA connection than to wifi one.
Is there a way to force it to check it for wifi connection first, and then only connect to HSDPA if no wifi is available?
Sorry, that I don't know.
And I can't be bothered by it here in NL. As we've got flatrate utms/hsdpa here with a number of providers.
At home I only turn on Wifi if the umts/hsdpa connection is instable.

O2 Atom Life's WIFI problem

Hi all,
i'm using O2 Atom Life, wm 6.1, and when i connect to my office wifi network, the phone will always search and get info from access point that have a weak signal.
I 've moved my phone closed to the access point, just say it named AP_A, but the phone always get a signal from other access point in other room that located far enough from AP_A, named AP_B.
When I move my phone again to the AP_B, then the phone will get AP_A's signal.
I've tried to set and resetting all of my access point and even replace some of them with a new one. The other phone can connect to it normally, with a strong signal.
The phone still can connect to the AP, but it only if I set manually and trying to get connected with the network more than 10 times for a strong wifi signal, in the nearest AP.
what should i do with my Atom Life???

Orange stated i can connect my phone to home wifi to boost signal? Anyone?

is this utter rubbish or what they told my misses if she buys the touch 3g it will connect ot out home wifi and boost signal as we have a low signal reception on orange in our area can anyone explain this to me and how my rhodium can do this also?
it wont boost your signal but obviously you will be able to suft the internet at much higher speeds just switch on your wifi in settings, it should give you a list of availible routers, pick yours, enter the wep key and your up and running
on that note I wonder how hard it would be to hack a, say, DD-WRT firmware set of routers to allow a repeater over the internet (for non tmobile users and their wifi calling! GRR)
I would love to modify a wifi router to catch CDMA/GSM instead of broadcast 802.11, then set it up VPN style to connect to another router that then broadcasts the signal instead of 802.11 (yes i know repeaters exist, but im talking miles away)
wow, first post here and I made myself a winter project! I have plenty of friends who would love to test it with me too ^^
now to avoid the red tape!
What they are talking about is UMA (google it for details) which basically allows you to route GSM traffic over an Internet connection via WiFi.
It's supported on Blackberries, some non-smart-phones (dumb phones), and the touch 3G. It's not supported on any of the other WM or Android devices.
Maybe someone on here can mod up a ROM for the rhodium to support this? It would need the radio from an Orange build of the Touch 3G. There may be other aspects to this as well.
yep the dude who likes trees is right - UMA is only supported on certain phones - one model of nokia, most blackberries and one model of HTC device - The Touch 3G. As far as I was aware though you need an Orange Livebox in order for it to work (Orange's broadband router).
It seems to work as I have a number of users using it at home with work provided phones (mainly crackberries) in areas of no orange reception- but from what I've heard in terms of feedback they're Orange Livebox isn't that great at range and also picks up allot of interference (one user regularly complains it keeps dropping connection).
thanks everyone that was what i thought. i will just have to get a nice ilegal orange gsm repeater on ebay then
My work blackberry works UMA over any wireless network that I have connected to, none of them are orange boxes or orange broadband.
At work we have mostly BT broadband with various routers and wifi access points - Draytek, cisco, dlink, 2wire from bt and at home I have talktalk with huawei and linksys access points.
Just wish I could get uma for other win mobile.
MG
matttytn2 said:
is this utter rubbish or what they told my misses if she buys the touch 3g it will connect ot out home wifi and boost signal as we have a low signal reception on orange in our area can anyone explain this to me and how my rhodium can do this also?
Click to expand...
Click to collapse
It's not technically correct, but might in effect be true if your phone supports UMA. This effectively routes a GSM call over your WiFi/ADSL and then via internet in Orange's circuit-switched core network. As a result if you previously could not make calls in your home on GSM, magically you now will be able to when within range of your router. They market the service as Unik or Unyk phone.
radiohead319 said:
It's not technically correct, but might in effect be true if your phone supports UMA. This effectively routes a GSM call over your WiFi/ADSL and then via internet in Orange's circuit-switched core network. As a result if you previously could not make calls in your home on GSM, magically you now will be able to when within range of your router. They market the service as Unik or Unyk phone.
Click to expand...
Click to collapse
By the way the Orange UK Unyk/Unik service does not need an Orange Livebox or ISP to work - it is the "open ISP" variety of UMA

WiFi won't disconnect when out of range

Hi all,
I have HTC One S from T-Mobile and noticed a big problem with my WiFi connection.
My phone will connect automatically to the wifi network in my home/work correctly, but when I leave and am clearly out of range of my wifi network (say, a km away), the phone still claims to be connected to the network, but I of course have no actual connectivity. The signal strength it reports has varied, from full strength to just a few bars.
I try giving it a minute, but it seems stuck and refuses to officially disconnect from the network. The only way to fix things is to toggle my wifi on and off, at which point it goes to mobile data since it can't find any wifi networks to connect to.
The thing is that I use Wireless Bluetooth headphones and since I started using my new phone, the signal drops (I believe it is because of the Wi-Fi not disconnecting from the network and is causing disruptions to the bluetooth connection).
Any ideas how to resolve this issue? Thanks.
NeoTheMatrix said:
Hi all,
I have HTC One S from T-Mobile and noticed a big problem with my WiFi connection.
My phone will connect automatically to the wifi network in my home/work correctly, but when I leave and am clearly out of range of my wifi network (say, a km away), the phone still claims to be connected to the network, but I of course have no actual connectivity. The signal strength it reports has varied, from full strength to just a few bars.
I try giving it a minute, but it seems stuck and refuses to officially disconnect from the network. The only way to fix things is to toggle my wifi on and off, at which point it goes to mobile data since it can't find any wifi networks to connect to.
The thing is that I use Wireless Bluetooth headphones and since I started using my new phone, the signal drops (I believe it is because of the Wi-Fi not disconnecting from the network and is causing disruptions to the bluetooth connection).
Any ideas how to resolve this issue? Thanks.
Click to expand...
Click to collapse
Already being discussed here:
http://forum.xda-developers.com/showthread.php?t=1617424
Sent from my HTC One S using xda premium

Phone Showing Wifi AND Cellular Signal

Hello, If my phone is showing both a signal to Wifi as well as 3G/H+ etc, what connection is it using? Im assuming its to do with the smart switch between Wifi/ Cellular on which is stronger, so in theory it uses Cellular data? Anyone with any ideas?
Cheers
If your WiFi is working fast your phone always goes for the WiFi, and the mobile data is not used.. You won't get an h+ when you get connected to the WiFi as it will be on standby while the phone users WiFi as primary network!
Hope it helps!

Categories

Resources