-Does anyone know how to priotize w-lan for internet connections?
It seem that my phone always uses the mobile connections (GSM, 3G etc).
In menu for connections where internet connections can be created, I can't find anyting about w-lan.
This is something I've been meaning to ask about while I wait for the Fuze. By way of background, I have a Cingular 8525 with the original (WM5) ROM, and it drives me nuts using it at home. I only get EDGE inside my house, but the stupid phone persists in making an EDGE data connection instead of using the nice, fast Wifi connection that I just enabled. I use NoData to make sure it doesn't connect via EDGE or 3G, and then half the time it says it says that it can't connect -- even though the icon says that it is connected!! The only way I can reliably connect via Wifi is to go briefly into and out of flight mode, then turn on Wifi before connecting.
I'm really, really hoping that the situation is better with the Touch Pro/Fuze. Can anyone reassure me on that?
it should be accessing wifi first by default i believe...unless other connection is already connected
Hello!
Start first the WiFi Connection and then the Internet Explorer or Opera.
pjo12345
There's this stupid thing with wlan connections in WM - if connection type is set to 'Work', you can browse through files on other computers in (W)LAN at home, but any Internet connection wll be realised through GRPS/3G. To make it connect to the Internet using WiFi, you need to switch wifi type back to 'Internet'.
Maybe that's the thing?
Is there a way how to setup that the WiFi is connected to both (work AND internet)? I never saw WiFi connected only to work network... I assume there is no way but why not to ask ;-)
I know that many others have problem with that, but I didn't find any solution yet...
Because when I set it as work, my Exchange sync is working but no Internet, and when I switch to Internet, opera and QuickpGPS is working, but no Exchange sync (it is trying to open VPN connection because I need to go though inside address to the server because certificates and of course it cannot get it). Or I need somehow set that no VPN will be dealed on this WiFi network...
I need something like BOTH or Auto option.
It seems to be switching from Wlan to G / 3G / H when the signal is not that great. Mostly with the weather tab and Opera. Quick GPS works fine. The way I make sure it is on the internet through wlan is to shutdown the telephone and keep the wlan on with comm manager. The disadvantage is that anyone calling will be heading to your voicemail. Another option is to use the "Nodata" program, en disable to internet connections.
On Touch Pro, I usually just go to COMM MANAGER and switch on wifi and switch off data connection. It is only a couple of quick steps and saves battery, since you don't need both on, if you only want to use wifi.
I am sure there must be a more seamless solution, but I like easy fixes.
wmm said:
I'm really, really hoping that the situation is better with the Touch Pro/Fuze. Can anyone reassure me on that?
Click to expand...
Click to collapse
No it is not better. Turning on WiFi is not enough. It will continue to use the cellular data connection until you manually turn it off. This wouldn't be so bad, but in my experience I've had to push the button to turn off the cellular connection multiple times before it would actually do so. What would be really nice is if WM could seamlessly switch from the cellular network to WiFi, with zero user interaction, just like the iPhone does.
I got an other problem with wifi. When I establish a wifi-connection and pull my mail the ppc still connect with a data-canection and didn't use the wifi. My kaiser used the wifi-connection for that.
8notime said:
No it is not better. Turning on WiFi is not enough. It will continue to use the cellular data connection until you manually turn it off. This wouldn't be so bad, but in my experience I've had to push the button to turn off the cellular connection multiple times before it would actually do so. What would be really nice is if WM could seamlessly switch from the cellular network to WiFi, with zero user interaction, just like the iPhone does.
Click to expand...
Click to collapse
I wrote the original post before I had a chance to try it for myself. I've had a Fuze for three weeks now, and it works fine for me. I turn on wifi and the Fuze uses wifi. I turn it off and it goes back to normal wireless. (I did do the registry edits to turn on the HSDPA stuff in the connections tab and enabled the modified connection icons in the menu bar. I don't know if that had any effect on this issue or not, but it does what I would expect now.)
I originally posted this in the IS03 sub-thread but received no replies.
Not root-related but since a little under a week ago, my IS03 has been having a real hard trouble with wifi when at home. If I move more than 4 meters or so away form the router, I cannot access anything.
When this happens, I'll disable/renable wifi (from 4-5 meters away or further) and one of two things will happen: 1. My network will not even show up or 2. My network will show up (with a 'good' or 'fair' wifi status) but when I try to connect, it will disconnect immediately.
What I noticed through the Wifi Analyzer app was that even when the Android wouldn't show my network on the network list, wifi analyzer still registered it about -70dbm.
I originally thought the router is to blame but both my wife's AU HTC Evo and my Amazon Kindle have no problems using wifi from the same distance.
I also thought that perhaps the cover I have for the phone may be collecting dust so I removed it to no avail.
Any ideas why the wifi in my phone is acting up?
Thanks.
UPDATE since original post: I moved my router (Linksys WRT160N V3) to a more central location and installed DD-WRT (TX Power power set to default 71) and the problem went away for about a week but now it has returned. Both my Kindle and my wife's Evo have no issues with accessing the internet through wifi from the other side of the apartment but the IS03 cannot.
If I try to connect to wifi and I am right next to the router, one of three things will happen: 1. It WILL connect but I cannot access the net. 2. The network will show up on the available network list but it won't automatically connect (will say the network is disabled. If I try to manually connect, it will immediately disconnect. 3. Network won't even show up.
i'm dealing with this weird issue,
i have set up a wifi network in my home consisting of a router and a repeater,and they have now eliminated the dead spots in my home.
I tested whether mobile devices can switch to the nearest access point when they are moved,while they are connected to the wifi network
laptops switched to the nearest access points as they were moved
unfortunately my arc was not able to...it depended on the same access point as it moved away, even if i keep it next to the repeater it would not pick it's signal.
this would happen the other way around as well if i connect via repeater and bring the phone near the router it would not pick router's signal
any work-a-rounds
HELP!!
Also running doom kernel i had to flash the wifi modules could this have affected in anyway
Sent from my LT15i using XDA
I know this post is a bit old...but a good solution for this issue is Best Wifi:
Description
Do you have a WiFi extender in your home or office, or even a second WiFi Access Point Name (APN)? You do? Then ‘Best WiFi’ is for you!
‘Best WiFi’ is a lightweight application that automatically switches between saved APNs based on their signal strengths. So if while you are pacing in the office or walking around at home, and the signal strength drops below the pre-set level, ‘Best WiFi’ will go through your saved APNs and automatically connect to the one with the best signal at the time.
Click to expand...
Click to collapse
This app works well to switch between different saved SSIDs that are listed in Android and has eliminated the issue of losing connectivity on my home network due to my phone staying connected to a weak signal and losing its ip address/not surfing.
Thank you
Same problem here, but this app does not do make any difference
Useful app, you deserve a "thank you"
hi...
ever since i got this phone i've been having problems connecting to internet via wi-fi, while at first i thought this might be due to faulty AP, replacing it didn't improve things, and although i get good signal (standing infront of the AP) and have an IP address, there's still no internet, (or have some but then it goes away).
could this be a faulty device?
Hi there,
At my girlfriend's house there's an existing WiFi access point for their home network and they also have a bunch of computers wired in with ethernet cable. Mobile reception in the house is terrible but I've found one spot by a window where I can sustain a pretty decent dc-hsdpa link. I'm able to tether my laptop to my phone, the phone creates a new WiFi network ap and my laptop connects to that. That works fine.
The thing is, what I'd really like to do, is to have access to the dc-hsdpa connection from some of the wired computers on her home network. To do that I want to have my phone bridge the house network - via their existing WiFi ap - to the mobile internet connection. I'd like the phone to provide a gateway on the house network that could be manually used from the other computers. (I want to avoid using DHCP or anything as it will disrupt the network for other users.)
I know this is technically possible but I'm struggling to find an application that allows for this functionality. I've spent a good amount of time searching around the internet but to no avail. Does anyone know where I can look or of a suitable application? (My phone is a Samsung Galaxy S4 i9505 flashed to run a rooted variant of the play edition KitKat rom.) I'm happy to pay money.
Cheers, Dave.