Hi there,
couple of weeks back my unrooted, unmolested G1 switched off, so when i switched it back on it just goes into boot loop with the TMOBILE G1 screen.
Pressing Home and power does the same, however pressing camera and power gets me to boot loader.
I have formatted my SD card to FAT 32 and copied two different DREAIMG.NBH files onto the card but whenever it boots to boot loader i just get "no image file"
can anyone assist - i'm not even fussed about rooting the phone, i'd just like to be able to get it back to factory default!
cheers
al
Bump!
Anyone assist with this?
Related
Guys,
I am a relatively newbe I have a Palm Treo 750, I loaded some third party software onto it, now it will not boot passed the Palm symbol, it locks up right at the end of the time bar.
I have tried a soft boot and a hard boot to no avail, I did notice however that I was able to boot into the boot loader screen. SPL-0.22.0000 I am unable to gain access to the file structure on the device when it is locked up, the only way I can gain any connectivity is when I power on holding the side button boot loader. I have checked out the Wiki site and unfortunately they do not have any files in the dumped rom section on the FTP. Does anyone have an image or file that I can load onto my MiniSD so that I can reimage this sucker?
Hello all,
Im in need of some help.
Earlier today I was taking a picture and the screen kind of stuck so I has to soft reboot it.
It didnt come back up. I was left at the rainbow bootloader screen.
I tried holding the camera button down and rebooting but it didnt change anything.
I tried several different combo's of holding keys down and rebooting and it always came back to that bootloader screen.
So the next thing I did was to format my cd card and downloaded KaisDiagTest1.zip and then coppied the KAISDIAG.NBH image file from the zip on to the root of the sd card.
That worked fine and I was left at a screen saying SPL 1.00.OliNex.
Next thing I did is were I think I screwed up. I flashed it with _ATT Tilt_RUU_Kaiser_CINGULAR_WWE_1.62.502.0_radio_sign_22.45.88.07_1.27.14.09R2_Ship.exe which is the ROM from the HTC site and I think I was only supose to use a custom ROM and now after it finished flashing the ROM it rebooted and is stuck showing loading ... on the screen.
It goes past the boot loader and is stuck at loading...
Please advise if there is anything I can do.
Cheers,
Chris
I'd advise looking @ the sticky to which has a flashin for noobs & stuck in bootloader with many ways to fix it, along with more valuable info.
Any problems post in appropriate threads rather than starting new 99% is covered.
Thread closed.
Hi, I've got the HTC Touch Pro (Raphael)
And I've had it in my drawer for a while becuase it broke down one morning and I just bought a new one, But I'm thinking of sorting out the problems with it now since I need an extra phone.
The main problem with it is that it locks up in boot.
If I do a normal boot it locks at the HTC logo and the "friendly dinging sound"
I was thinking of reflashing it, but since it never boots up the only flashing I can think of is through the SD card.
So i put the file "RAPHIMG.nbh" in the root folder of my SD card and booted it up using the volume button pressed to looad the loader, it swaps over to a loading screen then it just freezes here aswell.
Any ideas on to WHY this happens and HOW to solve the issue.
issue solved, I managed to get the bootloader to get to waiting mode and cet a connection to it from my windows computer and run a default ROM onto it, now I can start modding it
i couldnt help but notice this thread, im am facing the same problem, except that my phone has never been flashed before, its fully stock. how did you manage to load a ROM beyond the "Loading..." screen. i have done exactly what several guides, including the ones i found in the forum, have told me to. Neither the SD card flash, nor the Activesync flash are working.. help please?
flashing
try tsis :http://forum.xda-developers.com/showthread.php?t=540290
I've tryed this on Touch Pro and it works , but do only the driver replace on windows......don't do task 29 or else .Instal the driver bring the phone into a bootloader and flash a stock rom...
hope it will do...
I was trying to root my G1 and it failed to download and flash the DREAIMG.nbh file
and now I'm stuck in the bootloader screen and I have tried everything to fix it but nothing seems to work. I even pulled out the battery and copied the old files that were in my phone, before I started to screw with it, to my sd card,through another phone, and put the sd card back in my G1, but nothing happened. Please someone help!
In December of last year, I had my friend root and install CyanogenMod onto my Mytouch 3G Slide. Everything was working fine until I wanted to update my ROM and tried to boot my phone into recovery mode to make a NANDroid backup. A screen with a picture of a phone and a red exclamation point inside a triangle would appear, and I'd have to pull the battery out to restart the phone.
Then, I tried to access the bootloader by holding the volume down and power buttons. After some loading, it asked me if I wanted to update. Not knowing what it was asking, I said no, and tried to access the actual recovery menu, but the same screen showed up.
I tried again, this time accepting the update. Now, when my phone boots, the stock mytouch splash screen appears and the phone does nothing from there.
At this point, what would be the best solution? Is my phone just bricked, or is there a way to restore it to the stock firmware/recover CyanogenMod?
EDIT: For clarification, I can still access the bootloader, where I have four options: Fastboot, Recovery (See problem above), Clear Storage, and Simlock.
EDIT 2: I left it on the splash screen and discovered that it seems to have just thrown my phone into a stock factory state, running 2.1-update 1. Not sure if it's still rooted.