Win 7 error attempting Kies - Captivate General

Hi.
I have downloaded Kies and installed it on my win 7 ultimnate, prior I installes .net 4. As posted in another thread I have the phone USB set to KIES.
STill every time I attempt to start Kies I get the following message "C:\Windows\Microsoft.Net\Framework\v3.0\WPF\wpfgfx_v300.dll is either not designed to run on windows or contains an error". I have installed several times from microsoft.
Any clue to what should I do?

Related

cant update with kies mini

kies mini will detect my captivate but when i try and upgrade software my phone screen goes to downloading mode. kies gives messagr saying take battery out and tryt again. i have done this over and over. what do i do?
Before it gives you this error are you seeing some sort of message from Windows warning you about finding a new device named Gadget Serial? That happened to me. In order to fix it, I had to download and install Samsung PC Studio and everything worked then.

[Kies] Crash on Win 7 x64 - Virtual PC work-around

So I had the dreaded Win 7 x64 crash. I uninstalled IE 9. No go. Used that DLL fix (which I can't remember where I found it). Still crashed. So here's how I got around the problem.
Note:
I'm just sharing what I found since none of the solutions I googled up worked for me (maybe I'm the only one). For those who wonder why anyone would bother with stock Froyo, I'm sure there are reasons. I just wanted to do some testing of the upgrade exactly as it came from Samsung. There's probably an Odin flashable package somewhere which may be bit-for-bit identical, but I didn't bother looking. I'm hoping this will work if another update comes down the pike (Ha!) and Kies is still broken.
Here's what worked for me. It may brick your phone so understand that before you start.
Step 1:
Load up Virtual PC.
In Virtual PC:
Install the Samsung drivers
Install Kies Mini
Install Samsung PC Studio (for Gadget Serial driver)
Step 2 - back to the phone:
Flash stock. I flashed one-click JF6, but use the right stock firmware for your phone (build 1010 and later phones should use something like this)
Step 3:
At this point you may want to make sure the Gadget Serial driver is loaded and working (if you one-click flashed JF6 skip to step 4), so put the phone into download mode and plug it into the PC.
In Virtual PC:
USB Menu->Gadget Serial Attach
Insure that driver is working. If it isn't then the update won't work because Kies Mini will not be able to communicate with the phone after it goes into download mode. If it works then skip to step 5. If not then do step 4.
Step 4:
Have CWM update.zip on you sdcard root directory
Reinstall packages
Reinstall packages again
Install zip from sdcard
Install sbl_CWM_update.zip (attached to this post)
Do the step 3 check. If that fails then the Gadget Serial driver isn't recognizing you phone and this isn't going to work unless you can fix it.
Step 5:
Reboot the phone, turn on USB debugging then plug it in to the PC.
In Virtual PC:
Start Kies Mini
USB->Samsung_Android Attach
Start the upgrade
Wait 12 years or so until the phone goes into download mode
USB->Gadget Serial Attach
The install should continue automatically. If it doesn't there is an upgrade button which should be enabled when driver is loaded and the phone is detected.
Wait for the install to finish, at which point to phone should boot into Froyo.
Done.
thanks
cool, i had tried all of the other ways of forcing kies to recognize my computer... but it always ended with the same crash, nice little white box where the program should be. so im trying this out but its taking forever to get xp virtual machine up and running. i will post again with my final results
ok now for my story
i have had flashed multiple versions of cognition on my phone and have become very familiar with the process. i do love cog 3.04 but the problem is that the swype that is loaded on the rom is a 60 day trial version and it ran out. so i wanted to try out the stock froyo and see what improvents i wanted so i could cook my own rom.
i went and got kies mini on the release date for froyo and it was crashing everytime i used it, giving me this lovely white box on my windows 7 x64 ultimate computer. i tried multiple work arounds and have never thought of virtual machine so thank you for that.
i want and ran my odin one click reflashed to jf6, then decided to see if kies recognized my phone. it imediately was recognized and started to update in the virtual machine.
it is currently downloading to my phone and i will repost again if my phone either becomes soft bricked or if the update goes through
Please help me find the Gadget Serial Driver for My Samsung Vibrant
I've been trying to Update my Samsung Vibrant from version KA2 to version KB5 using Samsung Kies mini to no avail. I am running Windows XP SP3.
I know, this is a developer site but I have a feeling I won't be able to develop at all because I when I try to update to (Official) Froyo (Provided through Kies mini), I get stuck in download mode with the yellow sign forever. Luckily I can restore by taking the battery out and rebooting my phone. This is problem is due to not having a Gadget Serial Driver installed. Now note, I have all the other USB drivers installed properly. They all show up in Device Manager, however the darn Gadget Serial Driver is MIA and Windows only notices that is missing the driver when the phone enters Download Mode. I have searched xda developers for this issue and I have seen a number of posts where other people have had the same issue and maybe a couple of people solved it by installing PC Studio. I have Googled up and down the internet, went to Samsung's website and even spoke to a Samsung Representative for a link to Samsung PC Studio. However all of the links I found were either dead, contained fake software or were just shady.
Samsung's site no longer contains an actual download link to PC Studio or New PC Studio (I don't know the difference). Can someone please help me get this Gadget Serial Driver or the PC Studio software which may solve this driver issue? Please don't point me to any "Samsung USB Drivers For Mobile Phones" links because I've downloaded that driver and it has solved nothing. Thanks in advance and sorry for sounding like a complete n00b.
privetKalla said:
I've been trying to Update my Samsung Vibrant from version KA2 to version KB5 using Samsung Kies mini to no avail. I am running Windows XP SP3.
I know, this is a developer site but I have a feeling I won't be able to develop at all because I when I try to update to (Official) Froyo (Provided through Kies mini), I get stuck in download mode with the yellow sign forever. Luckily I can restore by taking the battery out and rebooting my phone. This is problem is due to not having a Gadget Serial Driver installed. Now note, I have all the other USB drivers installed properly. They all show up in Device Manager, however the darn Gadget Serial Driver is MIA and Windows only notices that is missing the driver when the phone enters Download Mode. I have searched xda developers for this issue and I have seen a number of posts where other people have had the same issue and maybe a couple of people solved it by installing PC Studio. I have Googled up and down the internet, went to Samsung's website and even spoke to a Samsung Representative for a link to Samsung PC Studio. However all of the links I found were either dead, contained fake software or were just shady.
Samsung's site no longer contains an actual download link to PC Studio or New PC Studio (I don't know the difference). Can someone please help me get this Gadget Serial Driver or the PC Studio software which may solve this driver issue? Please don't point me to any "Samsung USB Drivers For Mobile Phones" links because I've downloaded that driver and it has solved nothing. Thanks in advance and sorry for sounding like a complete n00b.
Click to expand...
Click to collapse
This is for the flight II but the software has the PC Studio download. Good Luck!
http://www.samsung.com/us/support/downloads/SGH-A927ZAAATT
privetKalla said:
I've been trying to Update my Samsung Vibrant from version KA2 to version KB5 using Samsung Kies mini to no avail. I am running Windows XP SP3.
I know, this is a developer site but I have a feeling I won't be able to develop at all because I when I try to update to (Official) Froyo (Provided through Kies mini), I get stuck in download mode with the yellow sign forever.
Click to expand...
Click to collapse
Thanks man. That made my day. I needed that.
You can also get the Heimdall suite and open the drivers folder and run Zandig. Then connect your phone in download mode it should show gadget serial in the device window click install and it should complete and you're good to go, this is how I did it after 3 days trying to get my phone to stop showing the device malfunction error which is due to another problem on my main xp machine, a sony which I can't get usb 2.0 drivers for from sony or anywhere else to work correctly even though all 8 ports are 2.0 according to support, my manual, and previous xp install and that's after installing xp 4 times to get the graphics driver to install right so I could then install the right ati driver which everyone online with this model sony seems to have to do, but back on topic. I hopped on my windows server 2k3 machine which had correctly working usb 2.0 drivers ran zandig with my cappy in dl mode and BAM finally working gadget serial driver, just make sure you have zandig.exe open, and connect your phone in DL mode or you'll just install the equivalent of the standard samsung drivers which you prolly already have, I haven't been able to test this on a win7 machine but from what I've read the heimdall driver should work on them and worked great on both xp and server 2k3 on my home server machine.
Sent from my SAMSUNG-SGH-I897 using XDA App
Jsmokey said:
You can also get the Heimdall suite and open the drivers folder and run Zandig. Then connect your phone in download mode it should show gadget serial in the device window click install and it should complete and you're good to go, this is how I did it after 3 days trying to get my phone to stop showing the device malfunction error which is due to another problem on my main xp machine, a sony which I can't get usb 2.0 drivers for from sony or anywhere else to work correctly even though all 8 ports are 2.0 according to support, my manual, and previous xp install and that's after installing xp 4 times to get the graphics driver to install right so I could then install the right ati driver which everyone online with this model sony seems to have to do, but back on topic. I hopped on my windows server 2k3 machine which had correctly working usb 2.0 drivers ran zandig with my cappy in dl mode and BAM finally working gadget serial driver, just make sure you have zandig.exe open, and connect your phone in DL mode or you'll just install the equivalent of the standard samsung drivers which you prolly already have, I haven't been able to test this on a win7 machine but from what I've read the heimdall driver should work on them and worked great on both xp and server 2k3 on my home server machine.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Best first post I've seen in quite some time. Thanks for that.
boborone said:
Best first post I've seen in quite some time. Thanks for that.
Click to expand...
Click to collapse
Thanks I appreciate that I just wanna give back as much as I've received from the forums here its a great place to start. If anyone runs into any problem with this let me know and I'll see if I can reproduce and come up with something.
Sent from my SAMSUNG-SGH-I897 using XDA App

Why does Kies always say there are corrupt files when I run it?

I just installed Kies 2.0 from here: http://www.samsung.com/uk/support/m...softwaremanual.do?page=MOBILE.SOFTWARE.MANUAL
And whenever I try to run it I get an error saying the files are corrupt and if it keeps happening then I should reinstall it. I've reinstalled it 3 times, restarting my computer each time and I keep getting that exact same error.
After Googling it a little, a lot of people seem to be having problems with it on Windows 7 64 bit (which is what I'm using) but at the bottom of the page I linked it says it is compatible with it...
Because Kies is not compatible with out devices ATm
Then how come in the dev section all of the odin flash to stock posts say that the easiest way to install drivers for the phone is with Kies?
Is there another way I can install the drivers for it?
it Kies installed on your computer. drivers have been installed. its another thing that kies does not work. but if kies it self installed on your computer then the drivers have been installed.
Here read this.
Samsung Infuse 4G drivers
Transformer27 said:
Here read this.
Samsung Infuse 4G drivers
Click to expand...
Click to collapse
It's still not working for me. I installed the one linked to from that topic and I get the exact same results.
However, if I go to the Devices and Printers window in Windows 7 when I have my phone in either Kies or Download mode, it shows a yellow triangle next to my phone. When I try to troubleshoot it, it says that drivers aren't installed and it can't find any.
I did that with Kies installed but it still says it can't find any drivers.

What have I done?: Not bricked but phone can't be recognized any longer

I was trying to install Cyanogen 7 and my first step was a one-click return to stock that seemed to complete fine.
When I rebooted I go into Android 3e recovery. Each time I boot the recovery message says:
Update media. please wait
update media. finished
#manual mode#
--Applying Multi-CSC...
Installing Multi-CSC
Install default apk-files. please wait
Install default apk-files. finished
The phone is no longer recognized by windows even though I've tried several different versions of the Samsung drivers. (also tried different USB ports, different cables and different computers per my search results in here)
I can get into Download mode but the device is not recognized so its not recognized by any of the ODIN utilities to repair or restore...
Any idea what is going on - or more importantly what can I do to recover this thing?
Help?
Thanks!
First of all, I would try Heimdall One-Click instead of Odin. It's more reliable, and uses better drivers. Will it not reboot into Froyo? And which one-click package did you use?
I used the Heimdall One-Click and it seemed to complete okay. Trouble started when I rebooted. I can't seem to redo it because the the One click utilities don't recognize the phone as connected.
I always get the Windows message "USB Device is not recognized" and when I go into my Device Manager the phone is listed as an "Unknown Device"
I would strongly advise against flashing back to froyo or eclair as the bootloaders are out dated.. As.for.your phone not being recognized it could be a number of issues from anywhere to ypur pc.needs a reboot to your usb cable is bad. I once had the same issue and i reinstalled the samsung drivers a few times with no reults. Believe it or not what fixed my problem was a fresh install of kies (a program i never use)
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
I installed Keis, rebooted and it did in fact recognize and re-install the drivers. I then tried the heimdall 1-click and it failed on the attemped handshaking with Loke step. Now I am back to not being able to recognize the USB device again.!
ugh!
WinoOutWest said:
I installed Keis, rebooted and it did in fact recognize and re-install the drivers. I then tried the heimdall 1-click and it failed on the attemped handshaking with Loke step. Now I am back to not being able to recognize the USB device again.!
ugh!
Click to expand...
Click to collapse
Heimdall uses completely different drivers
Sent from my SAMSUNG-SGH-I777
Yes it installed the heimdall drivers successfully when I tried to run the on-click. Then it timed out. I now appear to be back to an unrecognized device again. Installing Keis, Samnsung drivers etc trying to get it to recognize the phone again. It easily goes into download mode.
Anyone got any ideas how I can get this thing breathing again?
Try rebooting the computer. Use a USB port in the back of the computer. Try a different cable. Open Odin before connecting phone to computer.
mrhaley30705 said:
Try rebooting the computer. Use a USB port in the back of the computer. Try a different cable. Open Odin before connecting phone to computer.
Click to expand...
Click to collapse
Tried all of this - still no love. Every once in a while it will search and install Samsung drivers but then it disconnects almost instantly.
I also fumbled through getting a Ubuntu up to try it in Linux but the download mode isn't found in linux either.
Running out of options here. Wondering if I've pooched this phone.
WinoOutWest said:
Tried all of this - still no love. Every once in a while it will search and install Samsung drivers but then it disconnects almost instantly.
I also fumbled through getting a Ubuntu up to try it in Linux but the download mode isn't found in linux either.
Running out of options here. Wondering if I've pooched this phone.
Click to expand...
Click to collapse
Its not broken permanently, I promise.
Well slap my a$$ and call me Judy!
After 1 million attempts (cords, ports. pcs, windows, linux) I finally managed to get back into my phone. I literally must have had this phone in and out of download mode several hundred times in the last 24 hours. One of my attempts finally worked in Ubuntu! Not sure why really - but I am okay with that at this point.
Thanks for all you help!
Darren
<smack> good job Judy.

[Q] Download mode un-recognized

Windows 7 (x64)
Just got a Samsung infuse and i've had nothing but issues since the start. For starters. Im trying to go back to stock and start over. Ive tried odin and heimdall. ive tried at least 5 different driver packages. NOTHING will recognize the device. Ive tried different cables. different ports. Even different computers.
When I install any driver to it windows gives me code 10.
im about to throw this phone out the window
Are you using odin3.3?
Sent from my SAMSUNG-SGH-I997 using XDA App
You need to download Kies Mini inorder to obtain the drivers for your device 1st of all. Once the Drivers install it will recognize your phone that is plugged in as Samsung. The rest of the Software does completely nothing other than give us drivers, Once your finished with the drivers reopen Odin set all the options as needed Put your phone into Download Mode and you should see a Port # show up as either 3, or some other number as long as theirs a Port # then you can flash the Rom.
Ok so i FINALLY got the drivers correct. however, ODIN now hangs on 'setting up connection"
now what?
Ok. so i set compatibility in windows to vista sp2 lol now it works?
celljunkie707 said:
Ok. so i set compatibility in windows to vista sp2 lol now it works?
Click to expand...
Click to collapse
Previously, were you running it as Administrator? I believe that is required on Win7, but not on Vista (which I am running).
yea... i was running on admin every attempt. weird.
now im just trying to figure out why CWM wont see my external sd card.

Categories

Resources