Friends / Experts,
I know many of us using Primo on HTC HD2. I almost downloaded every available data.zip and 3 different versions of Primo.
Those who enjoy using Primo on their HD2 are privileged.....because not everybody who has all the info are succeeded running it.
Please help the under-privileged. Give us 3 to 4 lines of step by step procedure and the versions of files to be used.
Appreciate your help...
When I figure out a way to run, I am going to post a detailed 'Step-by-Step' procedure, good enough for even a beginner to start using the Primo version.
-Ari
P.S: Do not post any links to warez, as it is prohibited in this forum.
Nevertheless, there it adds for a long time an thread... so you must begin no new subject.
Try the posted solutions and give your feedback there -> hit me
Hi I install Primo and work fine till now but I didn`t use it too much I`ll give you link to ****** , this link is bulgarian I use the second one use google tranclate if you dont understand
Thank you!! HD2 PRIMO iGO
diegovolley said:
Hi I install Primo and work fine till now but I didn`t use it too much I`ll give you link to ****, this link is bulgarian I use the second one use google tranclate if you dont understand
Click to expand...
Click to collapse
Dear diegovolley,
Thanks for the tip. It worked!
I updated it with Gurjon 800 X 480 skin, now it looks beautiful and elegant.
Thanks a lot again.
Ari
hello
is there anyone that can tell me is it possible to run igo primo in portrait
i have change de sys but that is not working
Not actually possible, because there is no customized skin and data for portrait.
A little bit patience then.....
Igo screen
Hi
I need some help. Could some one helpme with igo primo? I have a HTC HD2 tmobile with the newer radio, and when i put the igo to run it stops at igo screen milimeters before the end. I already tryed new roms and hapen the same thing. Does some oe know how to make it work. Thanks hope someone helps
what do you mean by stops? it stays at that screen? or simple exit from Primo? 'cause, if it stays at primo screen, it could be, maybe, from the speedcam file. just wait around 2-3 minutes.
Its stops and I have to hard reset my phone. Pushing the yellow botton
c_arivazhagan said:
Dear diegovolley,
Thanks for the tip. It worked!
I updated it with Gurjon 800 X 480 skin, now it looks beautiful and elegant.
Thanks a lot again.
Ari
Click to expand...
Click to collapse
Hi Mate,
I guess you got this to work.
Can you please share how you got this to work. I have the Gurjon skin but no clue as to where to put it or how to install and every sys file i have dont work ....driving me nuts.
Can you help.
Cheers
Hi, facing the same problem here - and the bulgarian site link has been deleted.
also the thread link blocks me because I have too few posts..
So adding to my count here and if anyone can link me to a better thread/site on the topic, I'd be thankful.
Cheers,
Z
Hi! I download iGo Primo for HTC HD2, how install program on HTC HD2?
Thnks
pfg said:
Hi! I download iGo Primo for HTC HD2, how install program on HTC HD2?
Thnks
Click to expand...
Click to collapse
If it is an .exe file, connect the HD2 via activesync and run the program.
If it is a .cab, copy it to the HD2 and execute it on the phone.
stevedebi said:
If it is an .exe file, connect the HD2 via activesync and run the program.
If it is a .cab, copy it to the HD2 and execute it on the phone.
Click to expand...
Click to collapse
Thanks
I install it .
How can change maps ?
pfg said:
Thanks
I install it .
How can change maps ?
Click to expand...
Click to collapse
Sorry, I don't own IGO. I suggest you start a new thread listing that as the topic so people will respond.
I have the HTC HD2 and I want to install iGO primo v1.2 (9.2.0.191493) (May11 2011).
I need a strong sys.txt file.
Thanks.
pfg said:
Thanks
I install it .
How can change maps ?
Click to expand...
Click to collapse
You can find a lot of instructions and useful things here and here but you must register first.
To change maps go to your sdcard/content/maps folder
My ig Primo works when there is no voiuce guidance.
Soon as I use voice guidance, it crackles, then reboots the phones (crashes).
Can anyone tell me if they can get it to work, and what the fix is? Thank you.
maybe you should replace the voice with some other files than the ones that are crashing?
Related
Hi everybody,
I know this is not the good place to ask that ...
But,i have an Eten M700 and the task manager neither the HTC home plug in run ...
This applications are specific to the HTC pda ?
Or is there a way to run it ?
Thank you in advance !
Anyone have an idea to help me running the HTC application ?
I also am looking for this solution. Please help us!
Try it and see?
Just a cab file anyway.
wywywywy said:
Try it and see?
Just a cab file anyway.
Click to expand...
Click to collapse
uhmm, we've tried that, then we posted here. You see it doesn't work thats why we are posting . Ofcourse we'de try it before asking about it
Hi all,
I have repack "Tom Chinese Support.cab" and is all working.
I can now view Chinese character and also have A4 input with skin selection.
Would like to share with everyone.
kenalex said:
Hi all,
I have repack "Tom Chinese Support.cab" and is all working.
I can now view Chinese character and also have A4 input with skin selection.
Would like to share with everyone.
Click to expand...
Click to collapse
Great, will put it under Others on my Topaz File Mirror and also link to this thread in the WIKI.
BeeGee_Tokyo said:
Great, will put it under Tools on my Topaz File Mirror and also link to this thread in the WIKI.
Click to expand...
Click to collapse
Thank you. Did it work well in WM6.1?
It works very well for me in WM6.5
Cheers,
Nice job, was trying to make this myself before i came across yr thread. But can't get the skin working, you save me the trouble.
Thank You so much
DevilChris said:
Nice job, was trying to make this myself before i came across yr thread. But can't get the skin working, you save me the trouble.
Thank You so much
Click to expand...
Click to collapse
No worry, we are here to share.
kenalex said:
Thank you. Did it work well in WM6.1?
It works very well for me in WM6.5
Cheers,
Click to expand...
Click to collapse
Sorry, didn't try it under WM 6.1. I am only interested in Japanese input
Can I ask what the difference between this and the ZTA4 2.8 + msjh.cab that is posted in another thread
http://forum.xda-developers.com/showthread.php?t=528650
BTW, does this work in 6.1?
Thanks
BeeGee_Tokyo said:
Great, will put it under Tools on my Topaz File Mirror and also link to this thread in the WIKI.
Click to expand...
Click to collapse
May I ask where in your site did you put this file?
I can't d/l from rapidshare. And I can't find it in your site
Thanks
Goondu said:
Can I ask what the difference between this and the ZTA4 2.8 + msjh.cab that is posted in another thread
http://forum.xda-developers.com/showthread.php?t=528650
BTW, does this work in 6.1?
Thanks
Click to expand...
Click to collapse
This cab include both input and chinese support from HTC Asia rom made by Tom. I just repack the cab to fix the skin portion.
Goondu said:
May I ask where in your site did you put this file?
I can't d/l from rapidshare. And I can't find it in your site
Thanks
Click to expand...
Click to collapse
It is under Repository on my server.
Is this working for the htc rhodium?
Nice work kenalex. I was wondering how I could have this when I installed shadowline's rom. Thanks!
kenalex said:
Hi all,
I have repack "Tom Chinese Support.cab" and is all working.
I can now view Chinese character and also have A4 input with skin selection.
Would like to share with everyone.
Click to expand...
Click to collapse
Are you also able to make a cab for MS keyboard? I really miss that input method.
guys, i have a question, is CE-Star no longer working on TD2 WM6.5?
EDITED: the more i browse, the more confusing i am, used to be working fine withe just the CE-STAR, what is missing in the Manila 2.5 ROM?
Thanks work wonderfully on my HD2
Help
Hi Anyone have other link to download the files, as i try many time, still can't get to download the cab file.
How can I type in Chinese?
Hi, same problem here, how should I type?
shimate said:
How can I type in Chinese?
Click to expand...
Click to collapse
Hi, same problem here, how should I type?
and does it support SMS or ebook reader?
Thanks
hhfautumn said:
Hi, same problem here, how should I type?
and does it support SMS or ebook reader?
Click to expand...
Click to collapse
I tired it with SMS and it worked. You just need to choose the A4 keyboard.
I was wondering, is this only in simplified chinese? Can it do traditional chinese?
Also, I tried to uninstall it but could not.
How can I uninstall it completely?
Thanks for the help.
crus said:
I tired it with SMS and it worked. You just need to choose the A4 keyboard.
I was wondering, is this only in simplified chinese? Can it do traditional chinese?
Also, I tried to uninstall it but could not.
How can I uninstall it completely?
Thanks for the help.
Click to expand...
Click to collapse
after I installed it, I can not find A4 keyboard and my SMS is still squares for chinese. Do you know what might be the problem?
Thanks
I couldn't find this anywhere so I assume no one has posted something like this before.
I flashed my HD2 to Miri's v1.2 ROM and found out I didn't have JBlend anymore. Since I could't find any other JVM that could run Opera Mini as good as JBlend (at least visually) I tried to use the package that came with ROM 1.48 and make a CAB. Unfortunately it didn't install. I removed all the files from my CAB and left the registry parts in it and it installed. I did try to apply the registry changes by importing the reg files but there seemed to a problem and all the 3 registry editors I used said "import finished" and nothing was imported. The CAB however does the job.
So for anyone trying to have the JBlend version that came with the HD2 without flashing another ROM, try this:
1. Unzip all the files in the .zip file to \Windows
AND
2. Install the attached CAB (on the device)
To get the shortcut in start menu, create a shortcut called "JBlend.lnk" pointing to "\Windows\JBlend_AMS.exe" and place it in "\Windows\Start Menu\Programs\Tools"
(or wherever you want, only, the nice .png icon won't show if it's not in Tools)
Update (March 31st, 2010)
I replaced the files with the ones from the JBlend version that comes with the HD Mini (Photon). Now there's no problem with screen alignment in 6.5.X ROMs anymore.
Thanks a lot!
This solved my problem!
Great! I was looking for this for quite a while. Will test this and report back
dear mighty,
you're such a great friend, always helpful
tnx
manuelcalavera said:
dear mighty,
you're such a great friend, always helpful
tnx
Click to expand...
Click to collapse
You're most welcome
Dear mightymn
Thanks a lot
------------
Note: I am mehrdad
Mehrdad201 said:
Dear mightymn
Thanks a lot
------------
Note: I am mehrdad
Click to expand...
Click to collapse
Will be happy if I can help!
Try it and let us know if it worked
thank,s for dear mighty
Dear mightymn
I tried your solution for this issue.
But unfortunately, it didn't work on my phone.
do you have any other procedure for installing JBlend or the other JAVA environment?
Forgive me if im being stupid, but what is Jblend? I just googled it and it seems to be a Java program but thats all I know!
Thanks.....
mightycaz said:
Forgive me if im being stupid, but what is Jblend? I just googled it and it seems to be a Java program but thats all I know!
Thanks.....
Click to expand...
Click to collapse
it lets u run java programs on windows mobile
you guys can try out this too!
is working on my Miri's ROM.
It creates an icon for Opera Mini, making it work like an app.
however, it is buggy sometimes. When u change the input to full screen edit, you cannot press OK or Cancel after typing. This is the only major issue i faced so far.
Mehrdad201 said:
Dear mightymn
I tried your solution for this issue.
But unfortunately, it didn't work on my phone.
do you have any other procedure for installing JBlend or the other JAVA environment?
Click to expand...
Click to collapse
hum... what exactly is the porblem?
make sure you copy all the files from the .zip file to your \Windows folder and then install the cab, soft reset and now you should be able to run JBlend_AMS.exe from the windows folder.
can anyone else also try this?
thanx!
note: Now I tried it on microsoft's winmo 6.5 emulator and it works there :-?
Dear mightymn
In the other forum, I explained my problem.
I registered a visitor message there. Please read them as soon as you can.
Mehrdad201 said:
Dear mightymn
In the other forum, I explained my problem.
I registered a visitor message there. Please read them as soon as you can.
Click to expand...
Click to collapse
Dude at least copy and paste the message into here and see if any one else has an idea..........................
I am very glad to say
"Problem is solved."
Thanks my friend.
Mehrdad201 said:
I am very glad to say
"Problem is solved."
Thanks my friend.
Click to expand...
Click to collapse
really? great!
yeah, really
It works and definitely it is better than the other java softwares.
It does work for mine
Hi, Mighty, got to thank you for the sharing. It works perfectly for mine and has resovled a big problem after I had flashed my rom.
Opera Mini works again on Miri 2.3 ExtraLight Rom.
Thank you very much Mr. mightymn.
I updated my rom on 22th of octobre to 3.14.404.2 and when I restarted my HD2,
for a few seconds I saw a full-landscape-today-screen. It was filled with app. 6 icons (somewhat greater as uasual) and it looked great to me. I tried all kinds of things, but wasn't able to reproduce it.
Plz,plz,plz can anybody help me to get it?
Many Thanx & Greetz,
Pico.hq
Pico.hq said:
...for a few seconds I saw a full-landscape-today-screen. It was filled with app. 6 icons (somewhat greater as uasual) and it looked great to me...
Click to expand...
Click to collapse
I think what you have seen was the NaviPanel built in. Take a look at this thread where all the magic necessary is in
Thanx for your answer, I'm sure you made me find
the screen I was searching for. Too sad that I only
rarely use my Navigator. Once I've been at a place,
I remember the way to get there
But thanx again!
Greetz,
Pico
http://forum.xda-developers.com/showthread.php?t=829187
Wow, directly downloaded it and gonna try it just now !
Anxious for the result, while saying may thanx in front......
Will let you know the result !
Greetz,
Pico
Pico.hq said:
Wow, directly downloaded it and gonna try it just now !
Anxious for the result, while saying may thanx in front......
Will let you know the result !
Greetz,
Pico
Click to expand...
Click to collapse
and...........well???
Noob
Well O.K.,
I'll admit, i'm a Noob.... a 48-year old Noob..... How's that ?
I installed it on my Phone, gave it a soft-reset with PowerOptions_v1.22.cab but no Landscape for me afterwards.... ????
Manilla 2.5.20181527.0
Rom 3.14.404.2 NLD
Radio 2.15.50.14
Did I forget anything??
Plz help,
Pico
Pico.hq said:
Well O.K.,
I'll admit, i'm a Noob.... a 48-year old Noob..... How's that ?
I installed it on my Phone, gave it a soft-reset with PowerOptions_v1.22.cab but no Landscape for me afterwards.... ????
Manilla 2.5.20181527.0
Rom 3.14.404.2 NLD
Radio 2.15.50.14
Did I forget anything??
Plz help,
Pico
Click to expand...
Click to collapse
install bsb tweaks and enable landscape mode first..........then install this cab to device memory and not sd card...soft reset
Wow, looks great, i'm happy !
Thank you very much for all the help & support !
Greetz,
Pico
all those who have problem in installing uptodate 18.2 on their devices please use this cab instead of which came with installation package ,
default cab is located in storage card>255>pocket pc >cab file
replace it with attached below cab .
30 views for download
can some one leave a feed back
well..iam still on 17.3........
thanks.This fix is working in my htc touch hd wm6.5 and no more time errors.
For which program is this update?
What it's doing?
Sorry for my bad english.
don't know how to delete my message
thanks a lot dude.for cab file
commando0 said:
all those who have problem in installing uptodate 18.2 on their devices please use this cab instead of which came with installation package ,
default cab is located in storage card>255>pocket pc >cab file
replace it with attached below cab .
Click to expand...
Click to collapse
thanks a lot dude for cab file........thanks a lot...
Thank you
I don't know how I can Thank you.
I worked fine with me
Thanks again
thanks man you are my hero
i m having a problem with uptodat 18.2 on HD2 .. which is when i look for drug informations, and touch the "headings" the phone becomes unresponsive till i do soft reset with the red button,
is there any solutions for this issue,
thanks a lot ..
commando0 said:
all those who have problem in installing uptodate 18.2 on their devices please use this cab instead of which came with installation package ,
default cab is located in storage card>255>pocket pc >cab file
replace it with attached below cab .
Click to expand...
Click to collapse
My God! Thanks man, I will vote you for the president!!
thanks man
Thanks a lot.....
It was a headache for long ..
Best thing which has happened to me in long time.
Keep the good work going..
What does this do?
I looked through the forum and I didn't seem to find info.
No problem
Thx, works great
uptodate 18.2 works wonderfully on X1 running win mo 6.5 with sense after installing that cab. Thanks alot.
oh.thank man...i had a long time to find it.thanks so much