Check this out!
http://www.youtube.com/watch?v=lXMqxAgKnA4&feature=youtu.be&a
i like
but cant find any of these SGP cases or protectors from UK sellers yet?
not good, it's a plastic hard case
it will blow up apart at the first drop, i've had cases like that for other phones, not good for protection.
okay for fashion
OMG !!!!
where i can buy it ?
Pretty good, although I want a case that removes the current backpanel that utilizes those hinges and saves some space. Having a case on top of a removal and useless backpanel seems a waste to me.
but will it scratch the chrome bezel badly when keep slide in and out?
hihihehe said:
but will it scratch the chrome bezel badly when keep slide in and out?
Click to expand...
Click to collapse
Likely, but we don't know till someone gets it.
this looks pretty useless to me. Just like an above poster said, the case is made of a plastic that will shatter and crack upon impact and will not be a very good protector for the SGS.
Another thing i'm wondering is, what's the point of this sliding mechanism? I mean, if the case is meant to be on the phone all the time, is the sliding feature only good for removing the phone? If so, i don't see the point for an extra feature like that when we can just remove the phone the conventional way like with most hardcover back cases.
If the case is only for storage, like when you put it in your pocket, and that you will remove it when using it, wouldnt a leather case pouch be more practical and offer better protection?
Just my 2 cents.
i actually tried one of those in the stores yesterday, and i didn't like it the plastic is really too hard, it will not offer impact (drop) protection
the mesh type cases found on the other Case topic offers more protection that this
however of all the 3 type of cases i've tried, the Silicon type is the best, it kinda sucks in looks (there are a few colour and types that does looks good), and it offers the most protection for accidental drops
AllGamer said:
the best, it kinda sucks in looks (there are a few colour and types that does looks good), and it offers the most protection for accidental drops
Click to expand...
Click to collapse
ok, is this case like the incase slider for the iPhone?
b/c if it is Ima get it. That's what I had on my iPhone and it worked great
plus it didn't look like
yes it is really good, see pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i got the red one, is very sharp, everybody loves it
however the new orange one is even better
scrizz said:
ok, is this case like the incase slider for the iPhone?
b/c if it is Ima get it. That's what I had on my iPhone and it worked great
plus it didn't look like
Click to expand...
Click to collapse
The fact that it shatters when it hits the floor shouldn't be a bad thing in terms of protecting the phone, other than having to buy a new case.
A phone hitting a floor is all about dissipation of energy - if the energy goes into cracking and breaking a case apart, then a lot of the impact energy will be absorbed by the case breaking. That's why crash helmets commonly break on impact.
A rubbery/solid case might seem a better idea if you accidentally drop your phone, but in reality the shock will be transferred through the rubber (although somewhat dampened) and into the phone structure - and is so in a way more likely to crack the screen/phone chassis.
Of course it depends on the surface, angle of impact and height of the drop, but in general, if your phone falls and the back cover/case/battery fly out, it's better that the impact energy is distributed into these pieces than being absorbed straight into the phone/screen.
This case caught my interest, my only concern is that when we slide in the galaxy S.. would it scratch the chrome bezel ?
warping up plastic in more plastic..
Ordered mine in dante red (10 days shipping )
But will do a video review on my youtube channel when it arrives
(link here if u wna subscribe so u know when it comes out)
www.youtube.com/tech0stickyasglue
AllGamer said:
however the new orange one is even better
Click to expand...
Click to collapse
I bought this in black, its pretty nice.
For the SGP Ultra Slider, how would you attach a phone strap??
mhwgo said:
For the SGP Ultra Slider, how would you attach a phone strap??
Click to expand...
Click to collapse
Exactly my sentiment. Most likely you can't
A rubbery/solid case might seem a better idea if you accidentally drop your phone, but in reality the shock will be transferred through the rubber (although somewhat dampened) and into the phone structure - and is so in a way more likely to crack the screen/phone chassis.
The deal with rubbery case is that it is elastic, it's able to deform and hence reduce the impact/impulse, the same way car bumpers are designed for
Back to topic: I like the slider, maybe too slippery for me =(
SquidgyB said:
The fact that it shatters when it hits the floor shouldn't be a bad thing in terms of protecting the phone, other than having to buy a new case.
A phone hitting a floor is all about dissipation of energy - if the energy goes into cracking and breaking a case apart, then a lot of the impact energy will be absorbed by the case breaking. That's why crash helmets commonly break on impact.
A rubbery/solid case might seem a better idea if you accidentally drop your phone, but in reality the shock will be transferred through the rubber (although somewhat dampened) and into the phone structure - and is so in a way more likely to crack the screen/phone chassis.
Of course it depends on the surface, angle of impact and height of the drop, but in general, if your phone falls and the back cover/case/battery fly out, it's better that the impact energy is distributed into these pieces than being absorbed straight into the phone/screen.
Click to expand...
Click to collapse
Finally some case common sense. I for one am going to order a SGP. I have owned nothing but hard cases like the above, the slider and innocaseII and they have all been through hell and back.
Related
I'll have my Nexus tomorrow. Just wondering, is the teflon coating on this thing pretty solid, or is it a good idea to get a protective case for it? I'm VERY careful with my phones. I never used a case with my MyTouch3G or my G1, and they stayed in great shape with only a few very minor scratches here and there. But if anything happened to my Nexus, I'm sure I'd be pretty pissed at myself. So... input? Thanks?
Part Four said:
I'll have my Nexus tomorrow. Just wondering, is the teflon coating on this thing pretty solid, or is it a good idea to get a protective case for it? I'm VERY careful with my phones. I never used a case with my MyTouch3G or my G1, and they stayed in great shape with only a few very minor scratches here and there. But if anything happened to my Nexus, I'm sure I'd be pretty pissed at myself. So... input? Thanks?
Click to expand...
Click to collapse
I didn't use a case for about a month, only used the sleeve. Dropped it on my mat on my rug for my computer chair several times. No marks at all. I bought a Ghost Armor body kit just in-case.
http://www.youtube.com/watch?v=gpGAW6L5x8U
the coating seems pretty tough to me,
personally i use the sleeve it came with during pocket transportation
and from what i heard the screen can be easily scratched by aluminum, so i would avoid any situation that would cause that to rub your screen
I use the crystal gel case, its very thin an unobtrusive. I'd say go with a case and even a screen shield; better safe than sorry. Besides, when Windows Phone 7 or something else from Google comes out, you want to keep that resale value up!
Trust me... you'll be just fine with the included neoprene sleeve. What's the point of having such a svelte phone if you encumber it with a case?
uansari1 said:
Trust me... you'll be just fine with the included neoprene sleeve. What's the point of having such a svelte phone if you encumber it with a case?
Click to expand...
Click to collapse
If you drop it on concrete then it will scratch the case. You don't have to have a gigantic case. Just something to cover the actual phone.
I have a BSE and it's amazing.
It is made of a silicone type material that gives it a little rubbery feel [not a lot at all, just a little bit].
It makes it less vulnerable to scratches and damage to the actual phone.
It gives the phone a small bit of grip so it's not so easily dropped.
It gives it a glossy look.
It covers every inch of the phone including the screen.
It's crystal clear and doesn't get as many smudges as the normal screen.
Here's a great review on it
The only problems I had was at first it looks a little hazy but the skin just has to sit for a little while then it will look great.
And applying the skin is very tedious and takes about 30 minutes to do it right. If you do it wrong it will have bubbles and wont sit right.
Here's some pics of mine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I say get a skin as I find the phone to be too slippery without one. I have gotten used to it but I don't trust other people to use it without a skin.
@dumbestcrayon
nice skin, makes the phone look oh so sexxyy..
p.s. Glassjaw is AMAZINGG
I dropped my n1 on concrete and the scratch was enough to make me consider selling it! [I know, issues...] So now I use the stock case but get sick of taking it out all the time, its fine in the pocket without protection
Orangeandblue302 said:
@dumbestcrayon
nice skin, makes the phone look oh so sexxyy..
p.s. Glassjaw is AMAZINGG
Click to expand...
Click to collapse
Oh yeah I love it. One of the only physical flaws, IMO, was that the body isn't glossy. Now its better.
Glassjaw is pretty good. Haven't heard them in a long while. They came up on last.fm.
I would say no, but that is a pretty tasteful case posted in the forum. If you are on the fence, I say go for it. the phone is very durable, but it was a bit slick in the hands at first.
I'm all for the bse. Wish I put one on my g1
I use the Seidio belt clip case mostly for transport protection. But it's easy to remove the Nexus for use anytime as is!
galaxys said:
I use the Seidio belt clip case mostly for transport protection. But it's easy to remove the Nexus for use anytime as is!
Click to expand...
Click to collapse
I have a belt clip also. I just like the BSE because it has no flaws. It makes the phone glossy, a little grip, protects it from any scratches because it covers 99.9% of the phone [where the .1% is the tiny lines between where the pieces of the skin comes together XD]
And, it was $8. So it's 100% win for me.
dumbestcrayon said:
I have a belt clip also. I just like the BSE because it has no flaws. It makes the phone glossy, a little grip, protects it from any scratches because it covers 99.9% of the phone [where the .1% is the tiny lines between where the pieces of the skin comes together XD]
And, it was $8. So it's 100% win for me.
Click to expand...
Click to collapse
Cool beans...can't beat the price . So it fits in the belt clip ok and not too tight?
galaxys said:
Cool beans...can't beat the price . So it fits in the belt clip ok and not too tight?
Click to expand...
Click to collapse
Yeah, I had it for my MyTouch. When I ordered my N1 I expected to have to throw it out. It's a good quality clip that I got from some website. I forgot where. My cousin got his N1 before me so I tried his and it fit perfect. I was pretty happy about it. IT was a little bit tight at first but it stretched out a bit. It has an open spot right where the headphone jack is too. But as of today I got my Rockfish BT headset so I wont need that anymore
This headset is amazing...A2DP is great.
dumbestcrayon, have you had any experience with the Invisible Shield?
I currently have the Invisible Shield on my phone without any complaints, just wondering if you had a comparison.
Price-wise, mine was more expensive at what, 25 bucks i think, but albeit with free lifetime replacement. Dunno about performance though...
MintyFloss said:
dumbestcrayon, have you had any experience with the Invisible Shield?
I currently have the Invisible Shield on my phone without any complaints, just wondering if you had a comparison.
Price-wise, mine was more expensive at what, 25 bucks i think, but albeit with free lifetime replacement. Dunno about performance though...
Click to expand...
Click to collapse
Haven't tried it but I can say that I probably wont either lol. $25 is ridiculous. the specs seem to be the same thing actually.
i use the Seidio innocase 2. Its awesome except the fact that it cuts up your screen protector when you slide it on. But the phone outside is fully protected.
dumbestcrayon said:
If you drop it on concrete then it will scratch the case. You don't have to have a gigantic case. Just something to cover the actual phone.
Click to expand...
Click to collapse
Thanks for the great pics!
I can't make out however, if the full body skin also covers the edge (open slit) of the screen to prevent any dust/lint from getting inside it and further into the screen.
Can you confirm please?
Hello everyone! Just wanted to share this with the people here. Bought an Orange mesh case on ebay via London Magic Store and have been very happy with it. It's so nice that I am considering buying the white and possibly the blue one as well.
It doesn't provide as much protection as the gel cases, but it makes the device easier on the eye. It simply looks sleek.
Now on to the photos:
---
Front with backlight on
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Front with backlight off
Back
Side Power/Standby Button
Bottom Back Part
---
I hope you found this post useful.
this orange one looks great!
i'll wait until my red one dies, if ever... LOL
have anyone wondered.... Why the hell the cases does not cover the bottom of the phone??????, we just need a pin size hole for the mic
all these slick great looking hybrid (soft/hard) cases are like that... why?
not like we have any connectors there
I thought the mesh cases were the ones with holes in them? Usually, on Ebay, these are just referred to as "rubberized hard back case" or something like that.
AllGamer said:
all these slick great looking hybrid (soft/hard) cases are like that... why?
not like we have any connectors there
Click to expand...
Click to collapse
Maybe you'll like these kinds of cases:
http://cgi.ebay.co.uk/Hard-Rubber-C...2?pt=UK_MobilePhones_MobilePhonesCasesPouches
Ive ordered 2(different colours) myself.
regards
AllGamer said:
this orange one looks great!
i'll wait until my red one dies, if ever... LOL
have anyone wondered.... Why the hell the cases does not cover the bottom of the phone??????, we just need a pin size hole for the mic
Click to expand...
Click to collapse
I'll wait for my white to die off too.. LOL.
But somehow, I prefer the real mesh design (the ones with holes all over) but they don't come in orange.
As for the bottom opening, it's most probably to retain the flexibility of the case, so U can snap in and out easily. Mine came with a hairline crack at the bottom.. but it's a minor thing.. so Im not bothered.
MasK said:
it's most probably to retain the flexibility of the case, so U can snap in and out easily.
Click to expand...
Click to collapse
maybe that's the reason
otherwise i can't understand why the soft gel / rubber ones are fully wrapped, but the nice stylish ones are butt naked
i already have a full gel one, it's great for protection, but sometimes it gets a bit on the edge, when the finger is too close to the end of the screen.
so i prefer the stylish models like the orange one, makes using the phone easier, the finger doesn;t get caught in the way of the gel/rubber cases when sliding close to the edge of the screen
MasK said:
As for the bottom opening, it's most probably to retain the flexibility of the case, so U can snap in and out easily.
Click to expand...
Click to collapse
Naiveness ;> It's to save money, simple as that. Making a case which covers the top and bottom requires more precision work in order for it to snap in/out easily enough and beside that it also require more material and design work.
Back to topic though, you tricked my expectations Not nice playing with people's mind like that, saying it's a mesh case review when it's not. Anyhow, t'is a nice case, I should be getting the black version within a day or two.
As far as protection goes... Not really expecting much, if any at all. Pretty sure I'll end up buying a case mate tough case or something similar for the scenarios when I know I'll be more likely to drop things. Too bad they're pretty expensive, in comparsion.
but the mesh case and this case is identical
just different colours
the mesh has holes, this one is solid
AllGamer said:
but the mesh case and this case is identical
just different colours
the mesh has holes, this one is solid
Click to expand...
Click to collapse
That's like saying a fish net is the same thing as a hairnet. I'm not reaaally complaining, just nit-picking on the title.
AllGamer said:
but the mesh case and this case is identical
just different colours
the mesh has holes, this one is solid
Click to expand...
Click to collapse
But can U confirm the quality and finishing is identical?
Coz if I'm not wrong, the mesh cases are official Samsung accessory, made by Anycall. There's a shop here (set up by some China nationals) that sell cheap cases and they happened to have something similar to the one shown here, with various colours... They're S$15 and look cheap. Not sure if they are the same.
Do note the price varies alot.. U$11++ for the mesh ones and U$3++ for this with free shipping..
ihave the same case from london magic store but in purple and its great, gives the phone a lot more solid feel without making it too chunky.
also recived an orange mofi case to keep it in and even with the case on it fits in fine, very pleased
Anybody knows if this cases fit Samsung Galaxy SL (i9003)? I would love to buy one, but I don't know if it's going to fit with my phone!
Thank you mates!!
Nice looking case. Im stuck with some half metal half plastic pile of depression that scratches after the slightest graze. Seems like i got what i had for the money......
Well i've had the case for 2 weeks now so I feel I can give you guys an honest review of the case.
http://www.youtube.com/watch?v=TSCkAmij7P0
Construction.
The case is two parts, as i'm sure you've already read, however I want to draw your attention to both parts with regards to manufacturing, and design.
The internal hard case is a two part snap fit,
it features a lens protector which is substantial, and seems fit for purpose, there isn't any distortion i can see, and the plastic seems solid. The screen protector built into this case seems of high quality, but does cause colour refraction of the screen (the effects of a oily screen) this isn't terrible and I suffered the same using a Invisishield screen protector, but it's worth noting. I don't like the fact that the buttons on the front of the phone are cut out, the amount of lint and hair i get through the holes is unbearable to myself, and this leads to the next problem.
There are 6 snap fit clips around the body which on first fit are ridiciously tight. this is good and bad. If you never take the case off then it is sure to survive any impact, however if your like me and the dirt annoys you under the screen protector you'll be taking it off all the time. Now once you break that virgin seal the clips never hold as tight, this isn't to say it no longer grips, just it's not tight so now the two part plastic creaks and squeeks if squeezed together, the movement isn't huge but again I like things to be solid, and this case isn't.
Now the Silicon case goes on the outside, unlike the Case Mate - Tough.
I see this as a better idea than the hardcase on the outside, however Otterbox have slipped up a little in my opinion. There is a raised lip on the outside edge which the silicon case slips over to secure it. they've made one on the top, two long ones each side, and to hooks on the bottom. But not on the corners, this is where it's needed most because of the lack of lip you'll find that when you catch the rubber on your clothes hand, an object it will pull away from the plastic part. I'm constantly having to push the rubber back into the lip and massage the corners so they meet the body better.
Impact protection.
Purely by chance the other week my desire went down an iron staircase on a building site. Not good but a perfect test for the case.
Well tbh my phone picked up a bit of speed and dented a plasterboard wall on stopping. I was pretty sure I was in for a new phone, but to my honest surprise the case did it's job. The phone is in perfect nick, the case itself is ok too.
Conclusion.
Well the case is big and bulky, it makes the phone slightly larger than a iPhone 3GS with case attached, which by todays standards is a brick, it's not asthetically pleasing to those with an eye for detail because of the squeeks, the loose outer rubber cover, and the screen proctector creating colour reflex, and obvious holes (the mk2 doesn't have the holes i'm told) it's not really a looker. But thats not what this case is about, if you need a case to protect your phone on busy building sites, or even if you a cluts dropping it all the time then this is the case of choice. I think if Otterbox revisit this case, perhaps add the lip all the way round to hook the rubber over, use a clearer screen protector, perhaps using a snap fit lip upposed to 6 clips then this would appeal to the people looking for a stylish protection solution. I believe this case is the best solution for protection, but looses alot of ground based on looks.
Protection: *****
Design: ***½
Style: **
Price: ***
Overal: ***½
If you have any questions, please ask away
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
video review tonight.
diablous said:
video review tonight.
Click to expand...
Click to collapse
Thanks Can't wait
ok so ill presume no ones watched it then lol.
Great review
I am thinking of buying one of these.
Thanks for the review
Jokker_pt said:
Great review
I am thinking of buying one of these.
Thanks for the review
Click to expand...
Click to collapse
thanks for the feedback
diablous said:
ok so ill presume no ones watched it then lol.
Click to expand...
Click to collapse
Great review thanks !!!
shnizlon said:
Great review thanks !!!
Click to expand...
Click to collapse
Your welcome mate
Thanks for the review, after viewing it i think maybe i just gonna buy the commuter..not defender, i love the "sexy" looks on my desire..
Great review mate..
thanks man,
new review up
nice reviews man you happen to be able to make a comparison between the otterbox commuter and the case-mate tough case?
I would but unfortunately I don't own that case, if I fall out with my tough case, i may buy one and review it thoug
i owned a commuter case till yesterday. returned it today and bought a case-mate tough case based on your review
hope you like it
Nice review! Thanks man!
Thanks for the review, detailed feedback is v. helpful.
I have had the defender since day one when released. I removed the protective screen it came with and use a zagg protective screen instead. Like the original poster stated the rubber does come off all the time on the edges and I find myself consistently pushing it back into place. Not a big deal. Also I have noticed my rubber piece for. The earphone Jack is starting to rip off. Good case overall in my opinion.
I like it very much.
Thanks for this great review!!!!!!!!
other problem
not sure if its just my otterbox, and not sure if it was already mentioned in the review.
in the upper left corner of the case is a hole that shows a very small portion of the screen. this is for the sensor inside that knows when the phone is up to your face when on a call. when you put the phone down, the screen comes back on. however, like mentioned in the review, with all the holes in this case, dirt and dust collect very easily, and block that sensor from seeing your face, therefore, when you take the phone away from your face, the phone's screen remains locked out. button pressing wont bring it back on. you actually have to wait for some hole to shine through to that sensor, or take the otter box apart so the screen will come back on. very, very annoying.
http://www.ebay.com/itm/BLACK-HARD-...ccessories&hash=item45fe9d3624#ht_4171wt_1163
Doesn't it look like the Otterbox Defender?
At first looks cool, but then after a close look it kind of makes the phone look bulky
Looks exactly like what the Defender would be but Otterbox hasn't released a Defender for our Sensation. I wonder if these are from a batch of prototypes Otterbox had produced but decided not to market? I would love to hear from anyone who tries this. I might take the plunge myself as a matter of fact.
Sent from my HTC Sensation 4G using xda premium
lavafire said:
At first looks cool, but then after a close look it kind of makes the phone look bulky
Click to expand...
Click to collapse
Yeah, I thought the same. They also have one with the silicone black and the plastic white. It looks appealing but i'm not too sure. I was hoping someone had it.
jlczl said:
Looks exactly like what the Defender would be but Otterbox hasn't released a Defender for our Sensation. I wonder if these are from a batch of prototypes Otterbox had produced but decided not to market? I would love to hear from anyone who tries this. I might take the plunge myself as a matter of fact.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
I'm with you. Also, its being shipped from the states so it adds to the possibility that it might be a prototype. I would buy it, but the seller doesn't refund.
Ordered it today.
Sent from my HTC_Flyer_P512_NA using xda premium
i can understand protecting your phone is important. but come on. that looks horrendous. lol
barrist said:
i can understand protecting your phone is important. but come on. that looks horrendous. lol
Click to expand...
Click to collapse
The Otterbox Defender is one of the most popular tough cases for any device. Unfortunately it isn't made for the Sensation but this looks exactly like what it would be if it were actually made.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.otterbox.com/HTC-EVO-3D-...EVO3D_color=20&start=1&cgid=htc-evo-3d-cases
http://www.ebay.com/itm/BLACK-HARD...ccessories&hash=item45fe9d3624#ht_4171wt_1163
Sent from my HTC_Flyer_P512_NA using xda premium
Mine arrived this morning.
I had a Defender for my iPhone, which saved it a couple of times (mainly from beer spillage) so I wanted something similar and this appears to be the only option until a more established manufacturer pulls their finger out!
So, here are my thoughts on it.....
Overall:
Build quality is very middle of the road, ergonomics need working on, but for the price it does the trick.
Inner case:
The inner plastic case is snug and feels robust enough to withstand the odd drop (not as tough as O/box plastic tho..). It clips on and off easily enough, but not so easy as to make me concerned. All the holes are there and they are where they should be.
However, there is a serious - yet workable - design flaw with the "built-in" screen protector. It comes glued to the inner case, which is great, but in order to remove the protective plastic film on either side of it, you have to prise it off and then stick it back on once you've removed the film. Luckily the glue they use is extra crappy, so it's quite easy to un-stick. To re-glue the screen protector back on, I just used tiny amounts of superglue gel, applied with a pin head. Unfortunately tho, this means that the front face of the phone is not sealed and therefore not splash or dust proof.
Outer case:
The outer silicone is not of a good quality. It's very thin and floppy and I predict it would lose it's shape and possibly tear if it were pulled about too much. This is both unfortunate and ironic as it takes a lot of pulling and poking to get it to fit around the inner case. Once you've got it on properly, it's fine - it's just a bit of a mission to get it snug and flush. However, the biggest design flaw with the outer case, is that the headphone and usb port covers do not stay shut - or rather they open very easily. There is no "wedge" mechanism on the doors to ensure they hold in place. This is particular annoying as they flap open if your fingers brush past them when you are holding the phone. In order to rectify this, I have used a tiny bit of blu-tack (don't know what the US equivalent of it is, sorry) on the inside of the cover doors so they stay shut. One other thing... my particular model has what looks like a small cigarette burn on it, but I guess that's just my bad luck there!
Conclusion:
Obviously, I realise that this is not a O/box, or any other decent case brand for that matter, so I can't be too harsh on it, especially at the price I paid ($17.95/ £11.50). At the end of the day, it's an (almost fully) encapsulating case which will give my Senny more protection than most other options available, at least until someone makes a better alternative.
No, it doesn't look like the coolest case on the block, but that's not what I have my phone for, so I'm not too concerned about aesthetics. What matters to me is that it works.... and it does (almost lol!).
Hope this was useful. If anyone has had any differing experiences with this case, I'd be very interested to hear about them.
Cheers,
I arrived at work this morning and I'd received a new case for my Galaxy Note 4 to review! Happy days!
I'm currently dissecting it now and will update this thread later today, but first impressions.... this thing is BIG!
I've personally never seen anything with such heavy duty protection for the Note series, that's not to say they're aren't others, it's just a new one on me.
If you're scared of damaging your device, then this robust looking thing may be right up your street.
More to follow shortly while I put this thing thru it's paces.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PACKAGING:
The packaging is pretty decent to be fair, and definitely has a premium feel to it.
THE CASE:
Straight out of the packaging, this is what you get, they've included an Alan Key, to actually get into the thing which I think is good of them.
I've had "screw in" cases before, where you end up having to search around in the spider invested drawers of your garage just to get a key or screwdriver small enough to fit these things, so definitely a positive on that front.
Open up the case here is what you get inside:
Two Lanyards
An alcohol wipe
Cloth
Spare screws
And a second Alan Key
It's simply a case of unscrewing the screws and dropping your phone in
The inside part where the phone sits is rubber, with parts of it made into a honeycomb mesh, I'd say there's about 1CM of the stuff that separates the phone from the outside world once fitted.
The other materials used are aluminum for the front and back plate and it also has it's own glass protector which states to be Gorilla Glass, I can't confirm or disprove this but it's definitely glass.
The glass itself is clear and does not impair viewing and because the glass is attached to the case and not adhered to the screen, you do not get the "halo effect" associated with the current tempered glass protectors currently on the market.
Once installed get ready to start weight lifting, the whole thing together is "HEAVY", most definitely not something you'd want to stick in the top pocket of your shirt.
The only part not covered by this case is the rear camera, but is protected to a degree, as it's set back from the surface of the case.
Because the whole phone is enclosed, you have some raised capacitive buttons, to use instead of touching the phone itself, they work really well as does the responsiveness of the screen and the S-Pen on that screen, the S-Pen doesn't work with the capacitive buttons though, not a big deal but it's something to be aware of.
The ports for the Pen, USB and headphone socket are all covered by a cap of some description, the case states to be "Weather Proof" and I think it most definitely is, everything seems to lock together well, but it's not raining here (for once) so can't test this right now.
On a side note, I'm happy to report that all the cutouts for the ports and sensors are precise, everything I can see so far makes me have a feeling they've took care in creating this case.
The back of the case has a raised rubber backing, giving it some friction to stop it sliding around.
It's not as "grippy" to my bare fingertips though.
CONCLUSION:
This case in my opinion is great for those who do a lot of outdoor activities, or work in outdoor conditions and want to protect their device the best they can, this really does feel rugged and up to the challenge, in stopping rain and dust getting to your Note 4.
I personally would use, but only when I'm going to the beach or out camping/walking in the countryside with the family, not as my daily protection, for the adventurers out there, this is thing will be a great investment.
For the average person like myself, it's just two heavy and adds a substantial amount girth to the size of the Note 4 to use full time.
My everyday protection comes in the form of a Spigen Neo Hybrid, which in itself isn't exactly slender, but providing Love Mei don't ask for it back
I'll use the Powerful when I know I'm going to be going somewhere that phones are "allergic to" as this thing feels bomb proof.
Cheapest place I could find to get this was direct from them http://www.lovemeicases.com/love-mei-powerful-bumper-for-galaxy-note-4/ at $49.99
I like he case, but the branding on the front is the big turn off for me.
Wow that bulk! Guess you'll be happy it's safe I guess
stothy862 said:
Wow that bulk! Guess you'll be happy it's safe I guess
Click to expand...
Click to collapse
I know, mental ain't it! you need to have big hands to handle this with one hand, I'm 6.1" have sizeable hands and can just manage to handle it.
These cases were originally copied from a company called Lunatik.
Lunatik really dropped the ball making anything outside of the iPhone only cases.
That Note 4 version sure looks huge. Makes the Defender look slim.
A kickstand would have been nice. If it had a holster I'd buy it. I particularly like the glass protection screen considering there isn't a glass protector that fits properly w/o a halo available and I like the water resistant feature. Did you test it making calls and know your voice doesn't sound muffled?
From a bulk standpoint it doesn't look any bulkier than any other highly protective case like the Defender for example.
I see where others are talking about seeing the case, but I don't see any pictures that are posted. Were they taken down?
R$08 said:
I see where others are talking about seeing the case, but I don't see any pictures that are posted. Were they taken down?
Click to expand...
Click to collapse
Nope, looks fine to me and others, just you I'm afraid dude.
How is the reception with the case one? Lose signal since its metal?
the finger scan doesn't work with the case does it?
Mayonesa said:
How is the reception with the case one? Lose signal since its metal?
Click to expand...
Click to collapse
shong43826 said:
the finger scan doesn't work with the case does it?
Click to expand...
Click to collapse
Just when I thought I'd covered everything.... [emoji12]
I'll check on that today, reception wise, I didn't see any changes but didn't check GPS etc, so I'll check that too.
All the rugged cases look ugly.
Why isn't there a more girly one, that doesn't look like a fat robot?
iR¡[email protected]!* from i9505 via Tapatalk 4
iridaki said:
All the rugged cases look ugly.
Why isn't there a more girly one, that doesn't look like a fat robot?
iR¡[email protected]!* from i9505 via Tapatalk 4
Click to expand...
Click to collapse
....... You could always spray it pink? [emoji12]
RavenY2K3 said:
....... You could always spray it pink? [emoji12]
Click to expand...
Click to collapse
or just get the Pink Otterbox Defender
felloffthetruck said:
or just get the Pink Otterbox Defender
Click to expand...
Click to collapse
We only get the black and glacier in the UK. It's a bit of pain to order from the US because I always end up paying custom fees and the case itself is pricey already. And then I don't want to buy from a reseller because I am not aware of any reputable ones. You never know whether it will be genuine. I bought one for my S4 and it was a really bad clone. Oh well!
A rugged case for a phone that looked damn sexy naked? Hm...
raihan4 said:
A rugged case for a phone that looked damn sexy naked? Hm...
Click to expand...
Click to collapse
It wouldn't maintain it's looks if you worked on a building site and dropped it on concrete [emoji12]
I always put a rugged case on my new phones for a couple of months. By then I have my eye on something new. Then I take off the bulky case and enjoy the phone for a while before I sell it.
Thanks for the detail review,firstly I'm hanging on between love mei case and lunatik takkit,now I will go for love mei to have my N4 under extreme protection....
This case seems solid on protection,no other cases will have a better performance on guard...