I need help
I tried to upgrade from 023 to 026 today.... step 1 works well, ... and after i root i cant use timecape/mediascape again (prozess closes unexpected)
i reflashed now 3 times ... is there a way to reinstall it? or what am i doing wrong?
i used thhis method:
FULL UPDATE FROM ANY ROM ANY VERSION - ROOTED R2BA026 - with new keys
http://hotfile.com/dl/59478017/8dad8..._F3v3.rar.html
greetings
Robert
edit: fixed it now after flashing to 24 and then updating to 26
it happend to me also help us thanks
i just noticed the google market is crashing too
KingCifer said:
I need help
I tried to upgrade from 023 to 026 today.... step 1 works well, ... and after i root i cant use timecape/mediascape again (prozess closes unexpected)
i reflashed now 3 times ... is there a way to reinstall it? or what am i doing wrong?
i used thhis method:
FULL UPDATE FROM ANY ROM ANY VERSION - ROOTED R2BA026 - with new keys
http://hotfile.com/dl/59478017/8dad8..._F3v3.rar.html
greetings
Robert
Click to expand...
Click to collapse
I had this happen. So I went through the full root process again and then applied the 023-024, and then the 024-026 patches. Everything works great now.
So if all else fails, re-root (follow all the steps in the rooting post).
i try the full update earlier on with the root_v3.3! timescape was not working for me and some other glitches with softwares i installed too..
tried with the update_24_26 and it works
Related
hello,
I own a samsung Galaxy S xjf3 2.1 update1 and i rooted it using the method of blackfireNL after that i installed CFLagFix 1.80 after that everything was good and my was super fast so I downloaded titanium back up from the market and made a back up and when the back up was completed i opened the market and started a download but it gave a failure so i tried it a few times and it still doesn't work.
can somebody please help me cause i'm a real noob with this i don't know if i have to unroot agian and if so how to
many thanks and regards from NL
Jurgen
Hello,
I recently acquired a Xperia X8 and tried to install a CFW, but i have some issues
So far, as i understood, i'm on android 2.1 root, using xrecovery, my baseband is 015, build 2.1.1.A.0.16, the cell is the international version ( not the american one ).
I tried to install FroyoBread v023b and i also tried the GingerDX v017, following closely the guides, and no matter what i try, i end up always stucked at the logo ( either froyobread or i don't remember what is written on the second one ). My x8 simply freeze at these logos, and i finally go again to the xrecovery menu, restoring my backup and am still on 2.1 root.
If anyone have an idea of where i did wrong and how to make me install finally one of these roms, it'd be really nice =)
Thanks
reply
hy my friend.i have also xperia x8 and after i lnstalled xrecovery,i installed cyanogen mode 7 and everything were ok.....try to install this first and then install gigner dx....i hope this helps u!!!!
well, it worth a try ^^ if i can ask you the link of cyanogen mode 7 you used please ^^
I tried to install a CFW too, i'm on android 2.1 Rooted and xRecovery installed , my baseband is 015, build 2.1.1.A.0.16,
I tried to install the GingerDX v017, I install rom manager and when I try to install CWM there is not X8 on phone list.
I sucesfully install Fdxperience with xrecovery and restore to 2.1...
Help me with Rom manager, CWM and GingerDX v017please!
Thanks!
Well, i tried to redownload the rom and install it in case i could have a problem with the file i downloaded ( i doubted of it but who knows u_u ), same problem. i still am freezing at the froyobread logo
- Edit -
I tried just now with another rom, installed using the recovery system, and weirdly, its the same, i freeze at the logo Hackdroid this time...
If I install GingerDX v13 with xrecovery, is it possible to upgrade it to v17 without CWM?
Iwo66 said:
If I install GingerDX v13 with xrecovery, is it possible to upgrade it to v17 without CWM?
Click to expand...
Click to collapse
man, nothing personal, but could you create your own thread for your problem please ^^it'll avoid this one to become messy
i rather keeping my thread clean, i won't be able to help you and am myself in need of help
thank you for your understanding =)
Ok, sorry!
Trefle said:
well, it worth a try ^^ if i can ask you the link of cyanogen mode 7 you used please ^^
Click to expand...
Click to collapse
take a look here.... android-xperiax8.blogspot.com/2011/06/rom-froyobread-by-doixanh.html
ok i found out the problem... it was the µSD that was causing issues... i removed it, i booted... then i partitionned it a second time ( maybe the ext 2 part was a bit too big and made crash the FW first launch, who knows )
- Closed -
hey guys, i just flashed 4.0.4 on to my tab. I used the austria firmware release. It is working fine, no bugs
Sammy-Jay said:
hey guys, i just flashed 4.0.4 on to my tab. I used the austria firmware release. It is working fine, no bugs
Click to expand...
Click to collapse
Why did you start a new thread for this post?
Can also verify its working
:good:Also from SA on Vodacom, Only problem is I lost root and cannot get it back using all know methods.:silly:
TitanSA said:
:good:Also from SA on Vodacom, Only problem is I lost root and cannot get it back using all know methods.:silly:
Click to expand...
Click to collapse
Follow the other ICS update threads, and you'll find the answer.
i used this site ( theunlockr.com/2012/05/01/how-to-root-galaxy-tab-2-7-0/).
Solved Root problem.
Eventually got root back after doing a factory reset but when I installed "Titanium backup" it asked a question about my settings whether I want to use old or new and I chose old tablet restarted and then I lost root again. So did factory reset again and after installing Titanium chose new and now am rooted again.:victory:
Hi
Many people complained last days that they have problem with SuperSU 0.99 app.
They cant update the binary and phone reboots its self after "update failed" message
I got an HTC One S with S4 cpu last week and i got the new Jelly Bean Update 4.1.1
Then i unlocked my bootloader and installed TWRP custom recovery with One_S_All-In-One_Kit_v3.0 tool kit
After that i tryed to Root the phone with SuperSU 0.99.
Seems worked fine until i tryed to update my binary.
I get message "update failed" and my phone restarts.
I tryed to wipe and reflash the root but still same.
I even tryed to remove SUPERSU from System/App but with no luck. It keeps coming back even if i
removing it and revert everything to stock its still in SYSTEM.
Now i found this new Superuser version and flashed it and now my phone works fine and updating binary.
No more phone restart.
Even my SuperSU 0.99 is gone from system.
How TO:
Download superuser from this page http://androidsu.com/superuser/
Superuser-3.2-RC3-arm-signed.zip
Then boot into recovery
Flash Superuser-3.2-RC3-arm-signed.zip
Restart and voila the root works...
Hope i helped you guys.. Good Luck
Version 3.1.3 is reported to work better.
And doubt it really needed a new thread starting its discussed in most rom treads.
I started this thread just because of the issue SUPERSU 0.99 brings to HTC One S with Jelly Bean update.
I hope i can help someone because i didnt find any solution to my problem until i flashed superuser and it solved my problem.
shadowch31 said:
Version 3.1.3 is reported to work better.
And doubt it really needed a new thread starting its discussed in most rom treads.
Click to expand...
Click to collapse
I agree that this adds clutter, but I have been lightly following the threads for the JB ROMs and tried using superuser (though not the rc) without it working (still unable to update system). It's good to have this kind of solution in its own thread but general would probably be a better section.
Sent from my HTC One S Special Edition using xda app-developers app
This doesn't belong in the dev section for multiple reasons
Sent from my HTC VLE_U using xda app-developers app
Im sorry i didnt see that it was Development section. If someone can move it pls do so.
everyone uses SU...... this is very important for everyone using JB... leave it in here...
I feel it belongs here... this is where SU apps are in the development section... SO, this is where it should stay... (that is just my opinion)
I never want to start this thread like an development because im not a developer.
Reason is that i want to share my issue with anyone who is facing the same problem as i did.
Just like i said if someone think this thread doesn´t belong here then admins can move it to right section.
Updated to JB with OTA yesterday night.
Short version:
-Initially rooted with CWM recovery-> flashed MoDaCo stock recovery
-Apply OTA
-Flash CWM recovery
-Used CWM recovery to flash SuperSU 0.99 zip
-Uninstall/reinstall SuperSu from the Market
When starting SuperSU, it asks for update, if agree -> reboot.
BUT
When using root needing apps, like Titanium backup or FX file manager, they ask for root permission through SU and everything runs normally.
So SuperSU seems to work, only the front end app has some bug. I'm staying with that config waiting for an update.
Hi, same problem here on S3 cpu. Is this method works on S3 cpu as well? Thx for replying.
Hi. I think I have a problem with SuperSU (or something else??). I first started SuperSU last thursday (31.1.2013.). It ask me to update binary, I hit OK, and then it took about half hour to restart. System then recovered, and everything seem to be OK, but it's not!
When I connect my HTC One S to PC I only see files created (photos, videos) until 31.01.2013. Also, when I run Settings -> Memory com.android.settings crashes.
What to do?
I'm new to android. Plese help!
bihslk said:
Hi
Many people complained last days that they have problem with SuperSU 0.99 app.
They cant update the binary and phone reboots its self after "update failed" message
I got an HTC One S with S4 cpu last week and i got the new Jelly Bean Update 4.1.1
Then i unlocked my bootloader and installed TWRP custom recovery with One_S_All-In-One_Kit_v3.0 tool kit
After that i tryed to Root the phone with SuperSU 0.99.
Seems worked fine until i tryed to update my binary.
I get message "update failed" and my phone restarts.
I tryed to wipe and reflash the root but still same.
I even tryed to remove SUPERSU from System/App but with no luck. It keeps coming back even if i
removing it and revert everything to stock its still in SYSTEM.
Now i found this new Superuser version and flashed it and now my phone works fine and updating binary.
No more phone restart.
Even my SuperSU 0.99 is gone from system.
How TO:
Download superuser from this page http://androidsu.com/superuser/
Superuser-3.2-RC3-arm-signed.zip
Then boot into recovery
Flash Superuser-3.2-RC3-arm-signed.zip
Restart and voila the root works...
Hope i helped you guys.. Good Luck
Click to expand...
Click to collapse
I'm glad I ran across your thread. It helped me tremendously...
Da Baron
Any idea on how to get SuperSU work instead of SuperUser? I purchased SuperSU in the play store and I think it just looks better...
Hello guys,
Last days my phone has not been playing very nicely with me.
I did a complete wipe (using flashtool and wiped everything).
Then I reflashed latest 32.3.A.2.33 firmware and custom kernel (sunkernel 376_Aigoo_1_6_7) as can be seen on my screenshot.
So right now I am on .33 firmware and everything is fine, except that I keep still getting a notification that a system update is available (which is the same .33 update).
So I downloaded it and tried to install it, but it fails and then again I keep getting notified with this update... while im already on the latest firmware.
Any idea's how I can fix it?
- I've already tried reflashing firmware again 2 times.
- I tried unrooting and installing the update but again it failed.
Sony Xperia Z5 Nougat 32.3.A.2.33 + sunkernel 376_Aigoo_1_6_7
Any suggestions would be appreciated, well accept for flash firmware again, as im tired of that at the moment
Thanks :good:
Delete with Root Explorer the Sony Software Update App in system.
Make first a backup with TT Backup.
Reboot.
Thats what I always do.