Related
Post and share your Splash Images here!!!
Requests: All requests WILL be fulfilled. Once done, the flashable zip file will be PM'd to you directly, and shared on my Flikr account with direct download links in the description.
My Splash work: Can be found >>> here <<<
**The direct download link for each Splash image, is in the description.
***Check out hyun18's work! It can be found HERE***
Don't forget to click THANKS if you like my work, or I have been helpful to you.
How to install using FLASHABLE ZIP
1. Download the Splash of your choice
2. Place the PD98IMG.zip on the root of your SD card
3. Reboot to BOOTLOADER
4. Once the bootloader reads the zip, press VOLUME UP to apply
5. Reboot and enjoy.
Click to expand...
Click to collapse
How to install using ADB, with ENG S-OFF bootloader
1. Download the Splash of your choice
2. If the file is in ZIP format, extract the "splash1.img" file to your TOOLS folder of your SDK package.
3. Connect your phone your PC
4. Reboot your phone to FASTBOOT mode.
5. From ADB, within the TOOLS folder, type the following:
Code:
fastboot flash splash1 splash1.img
6. Once this is done, reboot and enjoy.
Code:
fastboot reboot
Click to expand...
Click to collapse
Instructions to make your own flashable Splash Image
Step 1. Make your image. (Dimensions are 480x800)
Step 2. Save as a 24bit Bitmap, named "splash1.bmp"
Step 3. Copy this Bitmap to your TOOLS folder of your SDK package
Step 4. From ADB, within the TOOLS directory, type the following
Code:
nbimg -F splash1.bmp -w 480 -h 800
Step 5. Take your newly made nb image, and rename the extension to ".img"
Step 6. Grab this blank PD98IMG file from here. THANK MUDKNOT FOR THIS blank file.
Step 7. Right click the zip file and select "open archive"
Step 8. Copy your newly made splash1.img file to this zip file.
Step 9. Flash.
Attached is the nbimg needed to do this. Just extract the zip file to your TOOLS folder of your SDK package.
Click to expand...
Click to collapse
Thanks to mudknot2005 for the Blank PD98IMG file. Go HERE and click "thanks" to thank him for making this happen for us. :-D
i have an image can you tell me how to make it a flashable splash screen
jlusco said:
i have an image can you tell me how to make it a flashable splash screen
Click to expand...
Click to collapse
Yes...I'll update the OP with instructions.
Can you make me a moving one?
Sent from my Desire HD using XDA Premium App
XAviierG said:
Can you make me a moving one?
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Splash Screens are stationary, and do not move. Boot Animations DO move however and are what is displayed after the splash screen.
If you want a custom boot animation, PM me what you are looking for. No promises, as this is not my specialty, but I can certainly give it a shot.
tribalartgod said:
Splash Screens are stationary, and do not move. Boot Animations DO move however and are what is displayed after the splash screen.
If you want a custom boot animation, PM me what you are looking for. No promises, as this is not my specialty, but I can certainly give it a shot.
Click to expand...
Click to collapse
Hey man, for it being "not my specialty", you do some mighty fine work. Any way you could do a variation of "HTC Inspire, Rooted, S-Off" with a blue background? The order they appear isn't important, I just wanted to get those three points in as the text part.
Thanks much!
-Mike
tribalartgod said:
Splash Screens are stationary, and do not move. Boot Animations DO move however and are what is displayed after the splash screen.
If you want a custom boot animation, PM me what you are looking for. No promises, as this is not my specialty, but I can certainly give it a shot.
Click to expand...
Click to collapse
Hey man, for it being "not my specialty", you do some mighty fine work. Any way you could do a variation of "HTC Inspire, Rooted, S-Off" with a blue background? The order they appear isn't important, I just wanted to get those three points in as the text part.
Thanks much!
-Mike
Ultra Droid said:
Hey man, for it being "not my specialty", you do some mighty fine work. Any way you could do a variation of "HTC Inspire, Rooted, S-Off" with a blue background? The order they appear isn't important, I just wanted to get those three points in as the text part.
Thanks much!
-Mike
Click to expand...
Click to collapse
Gotcha covered. I'll take care of it after work, and have it posted up on Flikr with the download link before I hit the bed. Any colors in particular that you are looking for? And what shade of blue? Dark or Light?
Great instructions...many thanks
tribalartgod said:
Gotcha covered. I'll take care of it after work, and have it posted up on Flikr with the download link before I hit the bed. Any colors in particular that you are looking for? And what shade of blue? Dark or Light?
Click to expand...
Click to collapse
Dark blue for the background. Maybe gold for the text.
Thank you VERY much! You da man!
-Mike
this is a great mini guide! I found the nbimg command here for windows as well, I couldn't find it in my SDK. here!
driftkidd2323 said:
this is a great mini guide! I found the nbimg command here for windows as well, I couldn't find it in my SDK. here!
Click to expand...
Click to collapse
You can copy those nbimg files to your SDK so that you have them for future use. I'll update the OP after work with a downloadable zip that contains these files as well, for those who don't have it.
Can I ask for you to make this image I put together into a flashable zip for me? My computer gets a little weird when I try using adb.
bathnapkin said:
Can I ask for you to make this image I put together into a flashable zip for me? My computer gets a little weird when I try using adb.
Click to expand...
Click to collapse
I have this done, but can't upload it til I get home from work. That will be at 6pm EST today. I'll PM you the link once done.
tribalartgod said:
I have this done, but can't upload it til I get home from work. That will be at 6pm EST today. I'll PM you the link once done.
Click to expand...
Click to collapse
Can you PM or post it for me too? The HTC quietly Briliant one from the OP too, if it's not too much trouble. I'm having a hell of a time making the P98 zips. :-(
Much appreciation.
bella92108 said:
Can you PM or post it for me too? The HTC quietly Briliant one from the OP too, if it's not too much trouble. I'm having a hell of a time making the P98 zips. :-(
Much appreciation.
Click to expand...
Click to collapse
bella...go here: http://www.flickr.com/photos/dotdead/sets/72157626499658155/detail
In the description of each Splash is the direct download link for that respective splash file.
And bathnapkin, pm'ing you now, but if you miss it, yours is here: http://dl.dropbox.com/u/15595851/Inspire Boot Splash's/Glow Droid/PD98IMG.zip
tribalartgod said:
bella...go here: http://www.flickr.com/photos/dotdead/sets/72157626499658155/detail
In the description of each Splash is the direct download link for that respective splash file.
And bathnapkin, pm'ing you now, but if you miss it, yours is here: http://dl.dropbox.com/u/15595851/Inspire Boot Splash's/Glow Droid/PD98IMG.zip
Click to expand...
Click to collapse
OMg You ROCK! Thank you Thank you Thank You!!!!!
bella92108 said:
OMg You ROCK! Thank you Thank you Thank You!!!!!
Click to expand...
Click to collapse
haha. Well thank you. ..and you are most welcome.
Thank you man. I've been stuck with my sad little white and green splash for a while now
can you make this flashable for me please
http://www.mediafire.com/?77z52fupbif6jua
After going through many of the different lock ring tutorials, I have noticed that they all have something in common: They are too user intensive and prone to user-error. Sure, once you have it down, it's easy. But it can be daunting to start out.
All I have done here is make it EXTREMELY user friendly.
No more copying and pasting into ZIPs and APKs!!
No more fishing around the Templates tree in M10 Tools!!!
Simply run the BATCH file, get a cup of coffee, and then flash!
Here are the detailed instructions... (also in the Read-Me)
0. Make sure you have installed Microsoft .net 4 framework on your machine.
http://www.microsoft.com/net
1. Unpack User_Friendly_Lock_Screen_Kit_v1.04.zip (Where you put the file does not matter anymore!!!! For example purposes, I will use C:\Lock_Ring_Kit)
2. Copy your image into C:\Lock_Ring_Kit and name it LockRing.png
Image requirements:
a. Must be a PNG file
b. Image must be 271 x 270 pixels (If it is not the right size, it will come out looking funny (270x271 WILL NOT WORK)
c. The image must be rotated 180 degrees and reflected horizontally.
3. Double-click "LockRingCreator.bat" and let it do its thing.
4. Flashable.zip was just created for you. Rename it whatever you wish.
5. Copy it to the root of your SD card, boot into recovery, and flash
The BATCH file cleans up after itself. You don't have to go through and delete any of the old files. If you want to make another one, just change out the PNG and run it again. My desktop is pretty old, and the BATCH takes about 2 minutes to run.
I have only tested this on Synergy, but I assume that it will work on similar ROMs. I also believe that it will work on the Thunderbolt (can someone confirm that?)
All files are included in the ZIP.
User_Friendly_Lock_Ring_Kit_v1.05.zip
Error Reporting
This is a work in progress. If you have an issue, please post it on the thread. Also, please copy and paste the output from the command prompt so we can get to the bottom of it. (Right click on command prompt, Select All, the then press ENTER. It is now ready to paste.)
Acknowledgments:
jmaher1023 - I used his process as a template. All that my BATCH file does is automate his process
Flemmard and DiamondBack2010- I have no idea what M10 Tools does or how much trouble they had to go through to make it, but I do know that it is the heart and soul of this whole operation.
Confirmed ROMS
Gingeritis3d
Synergy RLS 1
InCompatible ROMS
Kinged Shooter RLS 2.3
I'll try this out, thanks alot dude.
One thing you didn't mention is that the images still need to be 271 X 270 or they won't look right. Other than that this works on Gingeritis3d. (And if I want to say I was the one to create the lock ring I might edit the script) lol. Very good work though man. Very useful tool. Have you been able to find where the images are located for the Amazing sense skin? I haven't found those yet and want to use that semi transparent tool bar at the bottom but dont want to use a different launcher
somehow i cant get it to work ive followed every step but when i run the
"LockRingCreator.bat" it just goes into cmd really fast and nothing happens
TDubKong said:
One thing you didn't mention is that the images still need to be 270 X 270 or they won't look right.
Click to expand...
Click to collapse
Fixed in OP. I put that in the ReadMe, but forgot it on the thread Thanks for the reminder.
TDubKong said:
Other than that this works on Gingeritis3d.
Click to expand...
Click to collapse
Thanks for letting me know. I'll add a lit of confirmed ROMS that this works for.
TDubKong said:
(And if I want to say I was the one to create the lock ring I might edit the script) lol.
Click to expand...
Click to collapse
Navigate to C:\Lock_Ring_KitTemplate\META-INF\com\google\android
There is a file named "updater-script" Rename it updater-script.txt, and open it for editing. Just look for my name and replace it with yours. Make sure you take the .txt off after saving
TDubKong said:
Have you been able to find where the images are located for the Amazing sense skin? I haven't found those yet and want to use that semi transparent tool bar at the bottom but dont want to use a different launcher
Click to expand...
Click to collapse
No Idea
IDRFT95S14 said:
somehow i cant get it to work ive followed every step but when i run the
"LockRingCreator.bat" it just goes into cmd really fast and nothing happens
Click to expand...
Click to collapse
What operating system are you running? Do you have Microsoft .net 4 framework installed on your system?
When it is working properly, after you run the BATCH file you should see a command window running various commands for a little while.
did you
IDRFT95S14 said:
somehow i cant get it to work ive followed every step but when i run the
"LockRingCreator.bat" it just goes into cmd really fast and nothing happens
Click to expand...
Click to collapse
did you make sure the file was named LockRing and was a png format? Something else to consider is that if you named a png image lockring.png then when it looks for the file it will see lockring.png.png so make sure it is a png format image but only name it LockRing.Hope this helps
gamendorf said:
Fixed in OP. I put that in the ReadMe, but forgot it on the thread Thanks for the reminder.
Thanks for letting me know. I'll add a lit of confirmed ROMS that this works for.
Navigate to C:\Lock_Ring_KitTemplate\META-INF\com\google\android
There is a file named "updater-script" Rename it updater-script.txt, and open it for editing. Just look for my name and replace it with yours. Make sure you take the .txt off after saving
No Idea
Click to expand...
Click to collapse
Thanks brudda. I was only kidding about renaming the script. I knew where to find it. I can run a couple other ROMS if you want. I got nothing better to do tonight. Let me know which ones you want to add to your list and i'll do a couple.
just downloaded will test in a minute on mik3d beta1, but in the read me file, no sizes for pic you intend to use (just a heads up).
Forgot to mention I am running Gingeritis 3D Beta VIII. And I do have .net 4 installed. Maybe thats why i didn't have any issues. Also I didn't even read the read me file. oops.
life_420 said:
just downloaded will test in a minute on mik3d beta1, but in the read me file, no sizes for pic you intend to use (just a heads up).
Click to expand...
Click to collapse
You're right. Oops. Zip file has been updated
life_420 said:
just downloaded will test in a minute on mik3d beta1, but in the read me file, no sizes for pic you intend to use (just a heads up).
Click to expand...
Click to collapse
Love my DropBox. Tried a few other apps like Minus and another but they are just not so user friendly and helpful. Although a couple have more GB.
gamendorf said:
What operating system are you running? Do you have Microsoft .net 4 framework installed on your system?
When it is working properly, after you run the BATCH file you should see a command window running various commands for a little while.
Click to expand...
Click to collapse
windows 7 i looked it up and it does have the Microsoft .net 4 framework intalled ,im thinking i just didnt name something right ill try what TDubKong suggested VVV and ill get back
TDubKong said:
did you make sure the file was named LockRing and was a png format? Something else to consider is that if you named a png image lockring.png then when it looks for the file it will see lockring.png.png so make sure it is a png format image but only name it LockRing.Hope this helps
Click to expand...
Click to collapse
TDubKong said:
Love my DropBox. Tried a few other apps like Minus and another but they are just not so user friendly and helpful. Although a couple have more GB.
Click to expand...
Click to collapse
dropbox has been the easiest, havent hit a limit yet, except storage space..... which i upgraded to eliminate that problem, all the others i have tried i cant upload anything because they limit file sizes that you can upload, where as dropbox just syncs with your desktop, takes awhile but works.
just tried it to make a flashable zip and it did the same thing as other guy, flashed the cmd prompt super quick, no zip created.....
edit:
wait i just checked windows update and it has 2 updates for net framework 4 lol
nice i was using the copy paste way. i use one like this for the 3d(that was made by triscuit1983.
still didnt work for me, oh well back to m10 editor... thanx anyways
did you put it on your c drive i had that problem on the one for the 3d
I will try again tomorrow, work in the morning
Sent from my PC36100 using xda premium
life_420 said:
just tried it to make a flashable zip and it did the same thing as other guy, flashed the cmd prompt super quick, no zip created.....
Click to expand...
Click to collapse
dased14 said:
did you put it on your c drive i had that problem on the one for the 3d
Click to expand...
Click to collapse
Make sure that you unzip the files to C:\Lock_Ring_Kit. When I install them somewhere else ("C:\Lock_Ring_Kit______"), I get the same error you do. However, the BATCH file did what it was supposed to do. Since C:\Lock_Ring_Kit did not exist, it created it, and there is a "Working" folder as well as a "Flashable.zip" there. But, since the original files were not in the right place, it is useless.
When the command prompt just flashes, what that means is that M10Tools are not having a chance to run. The only explanation I have for that as of right now is that the files are not in the right location. Also make sure that you named the image LockRing.png.
I'll see about making the batch file spit out an error code, but it might be a few days before I can get around to it. I'll keep yall posted.
Hi all MTK (MediaTek) android users !!
I'll teach you to mod your boot_logo present in /media/images of you MTK device.
Basics:
--MediaTek android has three boot screens. 1st one is just an image and it is present in logo.bin. But till now, there is no way to mod logo.bin.
--The second screen is also an image. This is image is from boot_logo in /media/images folder. You can change this easily by following this guide !!
--The third one is the boot animation. It is present in /media/ folder and it is of the same type of all android devices. If you want to change, download normal android boot animations with the correct size of your device.
So, here is the guide:
Get a copy of boot_logo from /media/images to your computer. Rename it to boot_logo.bin
Click to expand...
Click to collapse
Download Image_Search_Editor.zip from the attachments. Extract it to a folder.
Click to expand...
Click to collapse
Now open Image Search Editor.exe
Click to expand...
Click to collapse
Select the file, boot_logo.bin to open.
Click to expand...
Click to collapse
Now select 16 colors from the left side panel.
Click to expand...
Click to collapse
Now click on the BMP button on the toolbar on the top.
Click to expand...
Click to collapse
Now resize the image by clicking : Size --> 'Set Window Size'
Click to expand...
Click to collapse
Now resize the image to that of your phone's screen size/resolution (example: 320x480)
Click to expand...
Click to collapse
Now you will see the full image.
Click to expand...
Click to collapse
Now with the help of photoshop or any other tool, open the image that you want to replace. Resize the image to same size of your screen/screen resolution (example: 320x480)
Save the image as a normal bmp image
Click to expand...
Click to collapse
Now, in Image Search Editor, select: Edit-->Replace by BMP. Select the bmp image that you saved.
Click to expand...
Click to collapse
Now click Apply
Click to expand...
Click to collapse
Then, go to File-->Save as BIN. Save it.
Click to expand...
Click to collapse
Rename the newly saved .bin file to boot_logo and replace it your /media/images folder and reboot.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Voila !!! The second screen is changed !!!
Will try to upload screen shots and a pre-scripted boot_logo flasher which can flashed through recovery !!!
NOTE: If you have completed modding your boot_logo and if you are adding to your ROM or uploading it anywhere, please give a link to this thread.Thanks.
Hit THANKS if you find this useful !!
reserved!
i already edit some pictures with photoshop and save as .bmp image with 16 bit. but everytime i chose replace by BMP and chose my .bmp image it says: this file is not a bitmap image. what's wrong with my image? there is more rules for creating .bmp image???
dzingga said:
i already edit some pictures with photoshop and save as .bmp image with 16 bit. but everytime i chose replace by BMP and chose my .bmp image it says: this file is not a bitmap image. what's wrong with my image? there is more rules for creating .bmp image???
Click to expand...
Click to collapse
try saving as a normal bmp image...........
balamu96m said:
try saving as a normal bmp image...........
Click to expand...
Click to collapse
it's done....
first, i save the original boot logo by click save as BMP. then, i use that bmp file to edit with photoshop...
it works.... thank you for threads....
i want to share this link, can i ???
dzingga said:
it's done....
first, i save the original boot logo by click save as BMP. then, i use that bmp file to edit with photoshop...
it works.... thank you for threads....
i want to share this link, can i ???
Click to expand...
Click to collapse
of course !!! with link, give credits also !!
Please, balamu96m you can post the original "boot_logo" file for 7" inch 800 x 480 MTK6513? I missed my file...
microcontrolados said:
Please, balamu96m you can post the original "boot_logo" file for 7" inch 800 x 480 MTK6513? I missed my file...
Click to expand...
Click to collapse
I dont have a 7" inch mtk6516......i post when i get it!!
balamu96m said:
I dont have a 7" inch mtk6516......i post when i get it!!
Click to expand...
Click to collapse
It´s okay. I already get it. You can download it here:
h t t p : / / w w w . g a m e f r o n t . c o m /files/21825843/boot_logo+%28original%29
I sucessfull changed my second boot screen in my Tablet MTK6513. Thanks!
Now i want change the first boot screen (logo.bin). My tablet update it by pressing Vol+ and Power Button, but the file "startup.bmp" need be in the SD Card. I sucessfull update it, but the image at first screen is showed with some distorcion.
How make a correct .bmp to the first bootscreen? How much colors bits it need have? I don´t have the original, because i think it´s kernel level, and i can´t get a copy of it.
"1st one is just an image and it is present in logo.bin"
Any update on the first image? thank you ^_^
SuperGuko said:
"1st one is just an image and it is present in logo.bin"
Any update on the first image? thank you ^_^
Click to expand...
Click to collapse
Didn't find any!!
Sent from my GT-I5801 using xda app-developers app
Can't find boot_logo
Hi:
I can't find boot_log on my MTK6573. The path system/media/images doesn't exist. Any idea?
Thanks in advance.
pirracas77 said:
Hi:
I can't find boot_log on my MTK6573. The path system/media/images doesn't exist. Any idea?
Thanks in advance.
Click to expand...
Click to collapse
Missing???
balamu96m said:
Missing???
Click to expand...
Click to collapse
The logo is shown in the start up but the directory is simply not present
Enviado desde mi Lenovo A60 usando Tapatalk 2
pirracas77 said:
The logo is shown in the start up but the directory is simply not present
Enviado desde mi Lenovo A60 usando Tapatalk 2
Click to expand...
Click to collapse
Maybe it doesn't have boot_logo and just uses logo.bin...........
Will update the post with modifying logo.bin....
Logo.bin
I Have done with editing logo.bin and it's work with my device.
maybe soon, I will make some tutorial in english..
==============================================
Or maybe you can check this, but this tutorial still in indonesian.
livebeta***kaskus***co***id/post/000000000000000680043732#post000000000000000680043732
balamu96m said:
I dont have a 7" inch mtk6516......i post when i get it!!
Click to expand...
Click to collapse
thank u for this great info..... can we edit logo.bin also?
Yup....it can be done using burnomartins script........
Sent from my GT-I9100 using xda app-developers app
drdogautam said:
can we edit logo.bin also?
Click to expand...
Click to collapse
Try this tool.
Sir plz upload 240×320 boot logo
Sent from my Spice Mi-270
I downloaded the image files from here: http://forum.xda-developers.com/showthread.php?t=1645846
I downloaded the file thinking it was a boot animation but turns out it's just a collection of image files.
So I took it upon myself to restore this boot animation.
Essential Requirements:
WinRAR
Boot Animation Factory - Click Here
USB phone lead connector
A computer / Laptop
A HTC Sensation
Click to expand...
Click to collapse
Pre-Steps:
1. Download and install WinRAR if you don't have it
2. Download and install Boot-Animation-Factory
3. Ensure your phone is on and connected to the computer
Click to expand...
Click to collapse
Steps:
1. Download the Homer_Boot_Animation.zip file
2. Save it to your desktop or place of your choice on your computer
3. Open Boot-Animation-Factory
4. Click on the green arrow [Top Left of Screen] highlight 'Boot animation' and select 'Flash to Phone...'
5. Click on 'Choose boot animation' and locate the bootanimation.zip file in the bootanimation folder
6. Copy + paste (or type) /system/customize/resource/ into the box to acknowledge where the boot animation is to be flashed
7. If not done automatically ensure the boot animation name is bootanimation.zip
8. Click and drag the scroll bar across
9. Select 'Choose boot sound'
10. Locate the 'animationsound'.mp3 and select it
11. Repeat step 6
12. Similar to step 7 but the name should read android_audio.mp3
13. Check 'Wait for device' and 'Reboot after flash'
14. Click 'Flash to phone'
Hey presto! Job Done.
Click to expand...
Click to collapse
Precautions:
1. Do a Nandroid Backup!!
2. This was installed on the ViperS sense 4.1 ROM so I cannot guarantee 100% it will work on other ROMs
3. Your phone needs to be rooted and {S-OFF [Pro-Users may correct me if I am wrong]}
Click to expand...
Click to collapse
Download the boot animation:
Homer_Boot_Animation.zip
Thanks to:
ViperS / Team Venom and all members involved
'Behold_this' for posting the original content
Click to expand...
Click to collapse
Youtube Link
Click Here
First
I will try it!
what happened to the youtube link?
AW: [BootAnimation] The Simpsons - Homer bootanimation with sound
Eezay said:
what happened to the youtube link?
Click to expand...
Click to collapse
That's a good question :-\
?Sensation XE
I like The Simpsons and i like your boot animation. Works fine :good:
Youtube video uploaded!!!
Hackerlacka said:
First
I will try it!
Click to expand...
Click to collapse
Have you tried it? What do you think?
Eisbrecher88 said:
Eezay said:
what happened to the youtube link?
Click to expand...
Click to collapse
That's a good question :-\
Click to expand...
Click to collapse
Finally got around to uploading the Youtube video. You can check it out here or via the original post above.
hompen said:
I like The Simpsons and i like your boot animation. Works fine :good:
Click to expand...
Click to collapse
Thanks hompen for your kind words.
Pretty cool. :good:
possible to have resolution in 480x800 please ?
naudmick said:
possible to have resolution in 480x800 please ?
Click to expand...
Click to collapse
It'll have to wait next week. I'm busy atm but I'll see what I can do.
Great
Enviado desde mi HTC Sensation Z710e usando Tapatalk 2
I finally made!!!!
i'm here to tell you how to obtain 4K & Timeshift video without Xposed Framework and put to work on our awesome Xperia Z1...
After a lot of experimentation i finally got it!!!!
Let's go:
METHOD 1
1º - Download and unpack the View attachment 4K_lp.zip, after that copy to your SD CARD.
2º - Reboot into Recovery and make a nandroid backup; Reboot your Z1.
3º - Now using a file explorer (I always use Root Explorer) copy the content of the unpacked zip in your respective folders.
IMPORTANT: remember that in LOLLIPOP the folder has a 0755 permission and all the files has the same 0644.
to make easy change permission, put the file explorer to show by date.
Done that, just reboot your phone and enjoy!!!
METHOD 2
Thanks to @iedafarha that made a flashable zip...
just reboot into recovery mode and flash the View attachment 4K_lp_FLASHABLE.zip.
reboot and Enjoy!
Bug report
- Some users have reported that SteadShot isn't working, perhaps it's a lib miss issue, i'm working on it...
Goodies
- Users that has Z1c reported that the 60fps bug, was correct by this mod!!
- Vídeo 4K;
- Timeshifit fully functional.
What...!? I am gonna test it in my z1c
Jonfensu said:
What...!? I gonna test it in my z1c
Click to expand...
Click to collapse
thanks mate, I tested in a Z1 with stock rooted lollipop, made a nandroid backup first and tell me if work property....
i'm preparing a flashable zip to make more easy.
good work m8, downloading and feedback later..
Edited: its worked , nice mod
iedafarha said:
good work m8, downloading and feedback later..
Click to expand...
Click to collapse
thanks m8!!
if you know how to create a zip to flash via recovery and do for us, will make my day!
i'm at work now and don't have SDK on my workstation...
How to set perfision? I use es file explorer
darthxa said:
thanks m8!!
if you know how to create a zip to flash via recovery and do for us, will make my day!
i'm at work now and don't have SDK on my workstation...
Click to expand...
Click to collapse
np - here flashable.zip as you request mate. , i thinks its worked. :good:
NexusGTS said:
How to set perfision? I use es file explorer
Click to expand...
Click to collapse
i really don't know how to do it with es file,
but, sort the itens by date,
and select all that is dated by today and long press or click on the 3 dot menu and select permissions,
if they are file type, set to 0644, if is a folder set to o755
iedafarha said:
np - here flashable.zip as you request mate. , i thinks its worked. :good:
Click to expand...
Click to collapse
thanks m8, I'll update the op!
darthxa said:
thanks m8, I'll update the op!
Click to expand...
Click to collapse
if there is a zip do i still need to set permisions? Thank you .
NexusGTS said:
if there is a zip do i still need to set permisions? Thank you .
Click to expand...
Click to collapse
I updated the op, just flash the zip and tell us your experience
Does anyone know how you can i edit the video bitrate
i try on media profil.xml not work ?
david azzz said:
Does anyone know how you can i edit the video bitrate
i try on media profil.xml not work ?
Click to expand...
Click to collapse
i really don't know, but i'll see iwhat can i do...
darthxa said:
i really don't know, but i'll see iwhat can i do...
Click to expand...
Click to collapse
A few years ago I managed to to do it on the my SONY ARC S
But I forgot the process
david azzz said:
A few years ago I managed to to do it on the my SONY ARC S
But I forgot the process
Click to expand...
Click to collapse
ok, but why did you wanna edit video bitrate on cellphone?
darthxa said:
i really don't know, but i'll see iwhat can i do...
Click to expand...
Click to collapse
It is working . You dont have to set permisions if you flash the zip . Can you make a flshable zip with this and portrait retouch ?
darthxa said:
ok, but why did you wanna edit video bitrate on cellphone?
Click to expand...
Click to collapse
To improve the quality of the video
The intensity of the flash
I managed easily to change in flashled calc parameters.cfg
the only Thing left is to change the bitrate
NexusGTS said:
It is working . You dont have to set permisions if you flash the zip . Can you make a flshable zip with this and portrait retouch ?
Click to expand...
Click to collapse
as i said to iedafarha, i'm at work and my workstation doesn't have SDK, so what can i do for you right now is upload the files and tell how to do...
it's not complicated
copy all files and folders to respective places (except SyncHub), set the right permissions (0755 for folders and 0644 for files), after that install as a normal apk the SyncHub, then go to data/app/com.sonymobile.synchub1
and paste all the content of the lib file set the right permissions and done!!
reboot and enjoy!
Download HERE
david azzz said:
To improve the quality of the video
The intensity of the flash
I managed easily to change in flashled calc parameters.cfg
the only Thing left is to change the bitrate
Click to expand...
Click to collapse
i'll see what can i do about this.
Man you are genius darthxa you mad my week
You should post in cross device section you will mad portal news soon