Related
I purchased the tether feature through ATT and had it working with the ATT ROM because there was a MODEM or something icon in my connections program group.
With the HTC ROM I don't see that? How do I setup to tether using the HTC ROM?
Thanks
To set up your device as a USB modem
1. On your device, tap Start > Programs > Internet Sharing.
2. In the PC Connection list, select USB.
3. In the Network Connection list, select the name of the connection that your device uses to connect to the Internet.
4. Plug in the USB cable between your device and the computer.
5. Tap Connect.
To end the Internet connection
On the Internet Sharing screen, tap Disconnect.
To set up your device as a bluetooth modem
1. On your device, turn on Bluetooth and set it to visible mode.
2. Initiate a Bluetooth partnership from your device
3. Tap Start > Programs > Accessories > Internet Sharing.
4. Select Bluetooth PAN as the PC Connection.
5. From the Network Connection list, select the name of the connection that your device uses to connect to the Internet.
6. Tap Connect.
7. On your computer, set up a Bluetooth Personal Area Network (PAN) with your device:
For Windows Vista:
a. Click Start > Control Panel > Network and Internet > Network and Sharing Center.
b. Click Manage network connections and then under Personal Area Network, double-click Bluetooth Network Connection.
c. In the Bluetooth Personal Area Network Devices dialog box, select your device, then click Connect.
For Windows XP:
a. Tap Start > Control Panel > Network Connections.
b. Under Personal Area Network, click the Bluetooth Network Connection icon.
c. Under Network Tasks, click View Bluetooth network devices.
d. In the Bluetooth Personal Area Network Devices dialog box, select your device, then click Connect.
8. On the Internet Sharing screen on your device, check if a connected status is displayed, which indicates that your computer has been successfully connected to the Internet using your device as a Bluetooth modem.
DUH, thanks that was easy.
Um, it would seem that I don't have to use the dial-up options like I did with the ATT ROM. Does this mean they can't track whether my data is being used for my phone or my computer therefore not needing to pay extra to "tether"?
Thanks
I just have the $40 unlimted pda connect plan and I have been using ICS for over a year now with now problems with cingular now AT&T
OK, so just got off the phone with att rep. Explained to me that I had the ENTERPRISE PDA w/TETHER (we looked at the chart together online) and told me that ENTERPRISE packages meant I could get my business's e-mail included for free. She didn't really know what that meant exactly so I was like "you mean have exchange server e-mail forwarded to my PDA?" she said- yeah something like that.
SO, I was like, what about this PDA PERSONAL MAX plan. She said it's still unlimited data, with 1500 text messages (which was NOT included in the PDA ENTERPRISE plan) and minus the business e-mail account forwarding (whatever that is)...
SO she switched me to the non-tethering PDA PERSONAL MAX $39.99 unlimited data, 1500 messages.
If I use connection sharing as described above I should be good to go right? It's a non-dial connection so I don't see how they ever could trace it.
It's amazing how little ATT reps (including the store rep that set me up with the $59.99 plan) know about these data plans. They are horribly ambiguous. A crime if you ask me.
Thanks for your help. I'll try using the connection sharing over the next month and see if it does anything crazy to my bill...
h0mersimps0n said:
OK, so just got off the phone with att rep. Explained to me that I had the ENTERPRISE PDA w/TETHER (we looked at the chart together online) and told me that ENTERPRISE packages meant I could get my business's e-mail included for free. She didn't really know what that meant exactly so I was like "you mean have exchange server e-mail forwarded to my PDA?" she said- yeah something like that.
SO, I was like, what about this PDA PERSONAL MAX plan. She said it's still unlimited data, with 1500 text messages (which was NOT included in the PDA ENTERPRISE plan) and minus the business e-mail account forwarding (whatever that is)...
SO she switched me to the non-tethering PDA PERSONAL MAX $39.99 unlimited data, 1500 messages.
If I use connection sharing as described above I should be good to go right? It's a non-dial connection so I don't see how they ever could trace it.
It's amazing how little ATT reps (including the store rep that set me up with the $59.99 plan) know about these data plans. They are horribly ambiguous. A crime if you ask me.
Thanks for your help. I'll try using the connection sharing over the next month and see if it does anything crazy to my bill...
Click to expand...
Click to collapse
Did you ever confirm whether AT&T could track our usage? I used to use PDANet for tethering, but PDANet doesn't work with WM6. They indicated that they don't have any immediate plans to accommodate WM6 users. Unless you guys and gals have heard differently.
Works great
Hello guys,
works great ! As soon as I understood that I needed to set up a Network pairing on my PC first...
YES !
Thanks guys
maiahsdad said:
Did you ever confirm whether AT&T could track our usage? I used to use PDANet for tethering, but PDANet doesn't work with WM6. They indicated that they don't have any immediate plans to accommodate WM6 users. Unless you guys and gals have heard differently.
Click to expand...
Click to collapse
I work for At&t myself and they are not tracking whether or not the usage came from your phone or computer they are just tracking the usage itself. They know how much usage a phone is capable of doing in a month and if your going over that then they know your doing something your not supposed to and can actually terminate your service.
I work for At&t myself and they are not tracking whether or not the usage came from your phone or computer they are just tracking the usage itself. They know how much usage a phone is capable of doing in a month and if your going over that then they know your doing something your not supposed to and can actually terminate your service.
Click to expand...
Click to collapse
Doing something your not supposed to do? What would that be?
I have never tethered to a PC. My device usage last month was nearly 7GB. I am sure most of the usage was streaming video (live TV) and video podcast downloads. All content was viewed exclusively on the Tilt, much in real time.
"Connecting me to my world"
I have a PDA Max plan at 39.99 a month with 1500 text messages and unlimited data, and I tether via internet sharing just fine.
DONT pay ATT for the Tethering plan, as you can do this all for free.
homer, you're right the rep didn't know much about data plans, media max plans are technically for non-pda phones. If you need to tether, I wouldn't download too much. I can see at&t eventually trying to change people from the 39.99 data and text plan if they have a pda. I don't even get 3g where I live, so 39.99 is the most I'd pay.
According to AT&T's official data policy, any users transmitting over 5GB/mo on their network run the risk of being "monitored" for potential abuse. If you frequently tether (which I do), just be careful not to exceed 5GB/mo more than 3 months in a row.
AT&T does not track whether a person is tethering via USB/Bluetooth, or just browsing the net and downloading a sh*t-ton of data directly on the phone. However, they can tell if your data is being used for their internal services such as AT&T TV and the like.
In true Wikipedia form, here's my reference for the 5GB limit. ComputerWorld.com
Does anyone know if the PDAMax limits your ability to use isp.cingular as opposed to wap.cingular; or is in anyway more limited than the PDA Connect Unlimited plan that I've been holding onto?
Hello PDAnet 2.0 does indeed work with wm6. I have it for both my 8525 and my 8925. It works just great.
tilt/tytn2/kaiser usb tether wth vista
<insertwittyusernamehere> said:
To set up your device as a USB modem
1. On your device, tap Start > Programs > Internet Sharing.
2. In the PC Connection list, select USB.
3. In the Network Connection list, select the name of the connection that your device uses to connect to the Internet.
4. Plug in the USB cable between your device and the computer.
5. Tap Connect.
To end the Internet connection
On the Internet Sharing screen, tap Disconnect.
To set up your device as a bluetooth modem
1. On your device, turn on Bluetooth and set it to visible mode.
2. Initiate a Bluetooth partnership from your device
3. Tap Start > Programs > Accessories > Internet Sharing.
4. Select Bluetooth PAN as the PC Connection.
5. From the Network Connection list, select the name of the connection that your device uses to connect to the Internet.
6. Tap Connect.
7. On your computer, set up a Bluetooth Personal Area Network (PAN) with your device:
For Windows Vista:
a. Click Start > Control Panel > Network and Internet > Network and Sharing Center.
b. Click Manage network connections and then under Personal Area Network, double-click Bluetooth Network Connection.
c. In the Bluetooth Personal Area Network Devices dialog box, select your device, then click Connect.
For Windows XP:
a. Tap Start > Control Panel > Network Connections.
b. Under Personal Area Network, click the Bluetooth Network Connection icon.
c. Under Network Tasks, click View Bluetooth network devices.
d. In the Bluetooth Personal Area Network Devices dialog box, select your device, then click Connect.
8. On the Internet Sharing screen on your device, check if a connected status is displayed, which indicates that your computer has been successfully connected to the Internet using your device as a Bluetooth modem.
Click to expand...
Click to collapse
also, while setting up your phone for connection thro a usb, go to "network and sharing center" > "local area connection" (the one from your kaiser) >> properties >> CHECK everything (sharing, ipv6, ipv4.. ) . no other changes needed (no need to disable usb on your laptop or kaiser, no need to disable 'advanced network functionality' under usb to pc. just enable internet sharing from comm manager and it works.
first off - i tried searching but could not find any solid info, from start to finish, how to make tethering work
i've never had to tether till now.. tried enabling Internet Sharing and connecting it both via USB and Bluetooth - no success.. i'm using Media Net $15 a month data plan, if that makes a difference (wap Vs gprs in user name but i did try both)...
is anyone using their phone as a modem? what settings do you have? please point the noob in the direction of a step-by-step guide if one is available (i did try to search but nothing than enabling Network connection via registry edit - not relevant)..
thanks a bunch to anyone who could help!
I'm online using the "internet sharing" connection now (in Florida cleaning up after a flood) (Yes, I need to get back to work . . . .).
I also have a Fuze and am using EnergyROM 2.0. Haven't changed any settings since installing the new ROM. Works like a charm for me.
Make sure the proxy box under the MediaNet settings is NOT checked.
vovan75 said:
first off - i tried searching but could not find any solid info, from start to finish, how to make tethering work
i've never had to tether till now.. tried enabling Internet Sharing and connecting it both via USB and Bluetooth - no success.. i'm using Media Net $15 a month data plan, if that makes a difference (wap Vs gprs in user name but i did try both)...
is anyone using their phone as a modem? what settings do you have? please point the noob in the direction of a step-by-step guide if one is available (i did try to search but nothing than enabling Network connection via registry edit - not relevant)..
thanks a bunch to anyone who could help!
Click to expand...
Click to collapse
Open up taskmanager and make sure that activesync is not running on the phone. this will not allow internet sharing to work. what does the phone say when you open internet sharing and click connect?
download a registry editor (i use total commander, and it works just fine).
open it up, go to \plugins\registry\HKLM\Comm\InternetSharing\Settings\ForceCellConnection and simply delete the contents of the value so that it's empty. Go ahead and do a soft reset and open up the internet sharing app. From there, select the Media Net connection and hit connect. Voila, good to go!
Enjoy!
ps I've gotten 2+ Mbps speeds via tethering
Dane Austin said:
Open up taskmanager and make sure that activesync is not running on the phone. this will not allow internet sharing to work. what does the phone say when you open internet sharing and click connect?
Click to expand...
Click to collapse
I keep activesync enabled so that i'm able to receive corporate email when on the road.
I was able to tether via USB (was doing nothing different from last night when i was unable to internet share via USB, however I noticed when shutting down that BT stack crashed); internet sharing app came up automatically once I selected internet sharing right after hooking up the cable to my laptop, and MediaNet was there by default (I guess it's all cooked into the ROM; did not have to delete any registry keys; kudos to NRGZ)... was able to get close to 1Mb/s download speed (upload is really slow however, less than 50Kb/s) - not too bad overall
Still have problem connecting via Bluetooth
maybe i'm having problem pairing laptop and Fuze? is there a pre-defined code/pass key that i'm supposed to use for the Fuze?
i was just using my security/lock code.. when laptop starts dialing (is dial up number *99# correct?), i get the following error box:
------------------------------------------------
Error Connecting to BluetoothConnection
Dialing *99#...
Error 678: The remote computer did not respond. For further assistance, click More Info or search Help and Support Center for this error number.
-------------------------------------------------
Anybody had this issue? or can share their connection settings for Bluetooth?
thanks everyone who responded!
vovan75 said:
I keep activesync enabled so that i'm able to receive corporate email when on the road.
I was able to tether via USB (was doing nothing different from last night when i was unable to internet share via USB, however I noticed when shutting down that BT stack crashed); internet sharing app came up automatically once I selected internet sharing right after hooking up the cable to my laptop, and MediaNet was there by default (I guess it's all cooked into the ROM; did not have to delete any registry keys; kudos to NRGZ)... was able to get close to 1Mb/s download speed (upload is really slow however, less than 50Kb/s) - not too bad overall
Still have problem connecting via Bluetooth
maybe i'm having problem pairing laptop and Fuze? is there a pre-defined code/pass key that i'm supposed to use for the Fuze?
i was just using my security/lock code.. when laptop starts dialing (is dial up number *99# correct?), i get the following error box:
------------------------------------------------
Error Connecting to BluetoothConnection
Dialing *99#...
Error 678: The remote computer did not respond. For further assistance, click More Info or search Help and Support Center for this error number.
-------------------------------------------------
Anybody had this issue? or can share their connection settings for Bluetooth?
thanks everyone who responded!
Click to expand...
Click to collapse
now, i just tried leaving User Name and Password fields blank on the Bluetooth connection wizard, and using dial-up number *99***1#, like they suggest here: Answer Center - Create a Windows XP Dial-Up Networking Connection for a Bluetooth Device , and got a new error:
------------------------------------------------
Error Connecting to BluetoothConnection
Dialing *99***1#...
Error 777: The connection attempt failed because the modem (or other connecting device) on the remote computer is out of order.
-------------------------------------------------
this is just getting funnier but kind of frustrating...
nhshah7 said:
download a registry editor (i use total commander, and it works just fine).
open it up, go to \plugins\registry\HKLM\Comm\InternetSharing\Settings\ForceCellConnection and simply delete the contents of the value so that it's empty. Go ahead and do a soft reset and open up the internet sharing app. From there, select the Media Net connection and hit connect. Voila, good to go!
Enjoy!
ps I've gotten 2+ Mbps speeds via tethering
Click to expand...
Click to collapse
tis fixed my tethering issue... thank you!
Damn AT&T trying to force people to pay more for tethering... shame!
smittyofdhs said:
tis fixed my tethering issue... thank you!
Damn AT&T trying to force people to pay more for tethering... shame!
Click to expand...
Click to collapse
smitty, do you tether via bluetooth or usb? i have no problem with usb now but still get the same "error 678: the remote computer did not respond..." i wonder if my BT driver is corrupt or i'm blacklisted by at&t
if anyone is able to connect using bluetooth and Internet Sharing app on Energy or any other similar ROM, can you share your dial-up settings with me?
after i start Internet Sharing app, with PC Connection = Bluetooth PAN and Network Connection = MEdia Net, and then right click my Bluetooth Modem in Dial-up Network Places on my laptop, the icon shows "connecting" for about 5 seconds (and the data icon H on the phone starts rotating) and then the error comes up on computer screen.. i can't believe no one else has had the same issue, i must be something with my laptop
vovan75 said:
smitty, do you tether via bluetooth or usb? i have no problem with usb now but still get the same "error 678: the remote computer did not respond..." i wonder if my BT driver is corrupt or i'm blacklisted by at&t
if anyone is able to connect using bluetooth and Internet Sharing app on Energy or any other similar ROM, can you share your dial-up settings with me?
after i start Internet Sharing app, with PC Connection = Bluetooth PAN and Network Connection = MEdia Net, and then right click my Bluetooth Modem in Dial-up Network Places on my laptop, the icon shows "connecting" for about 5 seconds (and the data icon H on the phone starts rotating) and then the error comes up on computer screen.. i can't believe no one else has had the same issue, i must be something with my laptop
Click to expand...
Click to collapse
I haven't been able to get my HP laptop to pair via bluetooth with my Fuze yet so I was doing USB. With regards to your issue, do you ahve one or two pull down menus in INternet Sharing app? If you have 1, then your registry needs to be hacked. AT&T used a registry key to force Internet Sharing app to only use the isp.cingluar access point (instead of wap.cingluar). If you pay the extra bucks for the full unlimited with tehtering then your account is setup to use isp.cingluar as well as wap.cingluar. If you just have the normal unlimited w/o tehtering option (which is not unlimited it caps at 5GB/month) then you only can use wap.cingluar. THis is how AT&T is going more easily find people using the cheaper plan with thethering and of course charge them up the butt for violation of the TOS (that they keep changing). Removing the registry key, fixes the issue.
smittyofdhs said:
I haven't been able to get my HP laptop to pair via bluetooth with my Fuze yet so I was doing USB. With regards to your issue, do you ahve one or two pull down menus in INternet Sharing app? If you have 1, then your registry needs to be hacked. AT&T used a registry key to force Internet Sharing app to only use the isp.cingluar access point (instead of wap.cingluar). If you pay the extra bucks for the full unlimited with tehtering then your account is setup to use isp.cingluar as well as wap.cingluar. If you just have the normal unlimited w/o tehtering option (which is not unlimited it caps at 5GB/month) then you only can use wap.cingluar. THis is how AT&T is going more easily find people using the cheaper plan with thethering and of course charge them up the butt for violation of the TOS (that they keep changing). Removing the registry key, fixes the issue.
Click to expand...
Click to collapse
sounds like we are in the same boat here - i can tether my HP laptop with Fuze via USB no problem now using Internet Sharing app, but no luck with Bluetooth whatsoever... i don't think there is an issue with the registry ever since i switched to Energy 2.0 ROM which must have the settings customized (so yes, I do have 2 pull down menus, and I have Media Net selected in the second one). So, I tried to use both wap.cingular and isp.cingular APN's (both [email protected] and [email protected] for User Name, CINGULAR1 for password; then I tried leaving User Name and Password fields blank...) with no success... nothing works, damn it!!!
looks like it gets paired up briefly, then starts dialing and gets the error in a couple of seconds.. the problem must be with the bluetooth dial-up settings for AT&T, because: 1) i have no problem tethering via USB; 2) Fuze is being paired up with my laptop and trying to use HSPDA data connection (as indicated by rotating H on the phone for a few seconds while my laptop tries to dial up).
by the way, have you tried dialing *99# or *99***1# (i tried both numbers as well as *99***3# for Samsung phones) from your Fuze, did you get any modem dial tone??
thanks!
I was able to connect to internet through bluetooth by using the following settings.
After pairing the bluetooth on both Fuze and laptop:
On my Fuze: open 'Internet Sharing' then select Bluetooth PAN and choose the appropriate network connection (in my case TZones) then tap 'Connect'
On the laptop: open bluetooth neighborhood then 'discover service' or 'explore' on the Fuze device. You should see 'Network Access Point on [Fuze]' and then double click on it.
Done.
ICS on AT&T HTC Fuze Cut Off (NRG Rom Series 2.0)
AUTiger83 said:
I'm online using the "internet sharing" connection now (in Florida cleaning up after a flood) (Yes, I need to get back to work . . . .).
I also have a Fuze and am using EnergyROM 2.0. Haven't changed any settings since installing the new ROM. Works like a charm for me.
Make sure the proxy box under the MediaNet settings is NOT checked.
Click to expand...
Click to collapse
I've been using ICS with no problems with a ThinkPad T43 for a few weeks at work to circumvent the proxies and reach out to my home machine via RDP. The RDP app for the Fuze just doesn't cut it with its whopping 640x480 screen. Turns out that AT&T in NY/NJ is somehow monitoring the connections. I was watching a bunch of videos to pass some downtime, and I guess I triggered some kind of alert on their end. ICS will connect to MediaNET with no problems (settings read wap.cingular), ICS status shows connected (I am connecting over USB) and my ThinkPad network connection shows a private IP address handed to it by the phone (192.168.0.x range). However when I am trying to connect to something, I'll get timeout errors. Running a simple ping comes back with no DNS capabilities as I can't even ping google.com... Has this happened to anyone on the forum? Can anyone offer some advice? I am thinking of just calling AT&T and playing dumb, saying that I was watching videos, as well as moving lots of music from my home computer via FTP ... Any advice appreciated. I pay for the $40/month PDA plan... I don't see the point of paying for tethering when you're already paying for data. Yes, before people start flaming me, I was stupid by using the connection to watch a bunch of videos, but you're able to watch youtube on your phone anyway....
--UPDATED 7-31-09 3:03PM --
So I downloaded ICS Control v0.21, which by the way is an awesome program. I went through the config, was able to connect my laptop to my HTC Fuze via WiFi. That was easy. As palringo (win xp version) was connecting in the background, I was able to do a test google search and get back results. Ran a continuous ping on google (ping google.com -t). Turns out that after about 25 ping replies or so, just about the time it took me to do a few web searches, the requests start timing out. Directing the ping at another website shows that the ping request couldn't find the host... basically the same problem I had tethering over USB. It's as if the AT&T network is determining that the request is coming from a PC and not the PDA and not passing the DNS requests... Either way, I tried to ping google via 74.125.45.100 and got back a request timed out. I am now wondering whether or not this may have to do with the packet MTU and whether or not the PDA packets differ from regular PC/WinXP packets. I just don't know enough about networking to be able to know. I am able to ping the Fuze gateway (for all-intensive purposes set to 192.168.2.1) and get back replies within 2-4ms. I really would love to hear from someone to whom this has happened before. I haven't called AT&T yet as the data connection on the phone itself works just fine, and I am able to load pages on the phone just fine. It's just any form of ICS that's beat...
Come on XDA-Dev, I know the collective intelligence can come up with something here.
I didn't think ATT could detect the difference between tethered requests and ones that originate on the phone, that would be bad though, if that were the case. Since the previous poster was watching videos, it seems to me the bandwidth would be the comparable to watching videos with the YouTube app on the Fuze, which I'm sure is within the terms of service contract.
My experience is closer to vovan75's. ICS works fine via USB, but does not work via Bluetooth. The strange thing is with the BT connection, I can ping the gateway, and even do nslookup with the default DNS, and sometimes if I get lucky, the connection works for a few seconds, allowing a page to load, totally random.
I thought everything worked using the original ATT rom, so I have a feeling culprit is something in the NRG rom, or maybe a radio incompatibility. I might re-flash to the old official rom just to try this, before the next time I update to the latest NRG build.
My setup:
Fuze with EnergyROM (July 22 build)
Radio: 1.14.25.35 (from official HTC 6.1 update)
Notebook with Windows 7 RTM
Windows calls this "Bluetooth Network Connection" (I don't see a reference to DUN, at least not in Win7)
ICS using BT (not working):
IPv4: 169.254.46.56
Gateway: 169.254.247.172
ICS using USB (working):
IPv4: 192.168.0.102
Gateway: 192.168.0.1
Windows 7 calls this "Remote NDIS based Internet Sharing Device"
DSLReport speed test (Flash) - down: 696Kbs, up: 336Kbs (varies quite a bit, much better at night of course)
Okay, figured it out. The DHCP setting for the bluetooth PAN should be off (I know, counter-intuitive). I found this by diff'ing the entire HKLM-Comm registry branch of the last EnergyROM build (Sept 6) vs the official ATT 6.1 rom (5.11.502.2WWE), which did work after all.
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Comm\BTPAN1\Parms\TcpIp]
"EnableDHCP"=dword:00000000
BTW, you don't need to setup Dial-Up Networking when using the Internet Sharing application (IntShrUI.exe). DUN needs to be configured on the PC when using the phone's modem bluetooth service, and AFAIK, needs to be provisioned by AT&T before it will work. The Internet Sharing app acts like an uplink for paired devices in the bluetooth personal area network (PAN).
rasterX, you rock! That little illogical registry fix is all I needed... I'd been banging my head against this Bluetooth DUN thing for days.
Thanks!
I know that the CM 6.1 supports the USB Keyboard/mouse, but what are the odds of getting the Bluetooth DUN tethering support ported over from the Archos 101 and 70 devices? Would love to hear some insight from the devs about the feasibility of having such a feature. I would love to leave my EVO tethered to the GTab over Bluetooth instead of Wifi. It would be a huge battery saver when I'm away from home/office wifi connection.
Also, USB Keyboard/mouse as a part of TnT? Possible? Worth it? Not worth it?
I second the above. BT stays on 24/7 on my phone, it would be much easier, and ideally we could eventually come up with some sort of on-demand script or app that keeps the BT DUN profile active, without battery drain on the cell.
With this in place, the gTab could connect and disconnect to the cell phone as needed, just like DUN should be. Best case scenario is to not even have to do anything on the phone, just enable BT on the gTab (or leave enabled as desired) and do some activity that accesses the internet. This would trigger a BT DUN connection to the phone, which disconnects after a certain period of inactivity (or manually, as desired).
If I knew a damn thing about how to program, this is what I would be trying to create.
That said, I'm a willing guinea pig.
Really? No one else is interested in this?
I know one of you guys out there has a rooted phone with wireless tether. I'm just starting down the root road. I have a Dinc, but it's been factory since I got it... and will be until the weekend, the gTab has whetted my whistle for root freedom.
What happens when you try to pair your gTab with your phone while it's got BT Tether activated? Any BT DUN profile goodness?
P_6 said:
What happens when you try to pair your gTab with your phone while it's got BT Tether activated? Any BT DUN profile goodness?
Click to expand...
Click to collapse
I'll try it out and let you know.
Bluetooth Tethering a High Wish List Item
For me, getting the tablet to tether via bluetooth to my Blackberry Tour would be a high priority wish list item. I am completely in the dark with this stuff but I can tether my PC to my Blackberry so I should in theory be able to tether and use the network connection. I realize that most folks here probably have an Android-base smartphone, but my company makes me carry around their smartphone (and has the decency to pay for unlimited data plan). If I could get the tablet to work from the BB's network connection I would be almost complete on my wish list. I have gotten to the point of paring the two devices (but can't seem to get them to connect). I am using tnt lite 2.02 and my 9630 device has v 4.7.1.40 with 3G, CDMA connections.
Indeed, the hope would be that the BT stack within the gTab can take advantage of BT Dial up networking or Personal area networking profiles. Then we would be good to go. If not now, hopefully we can find a way to get that to work.
Really? No one care about Bluetooth Tether on this device?
You don't have to ask me twice Oops, you did.
I am extremely interested in a Bluetooth tethering solution for the gtab. It's the only way I will be able to get a 3G connection from my phone that won't be policed at work (non-corporate wifi hotspots are monitored).
I have a Nexus One Adnroid phone (running Froyo 2.2.1). I use the Wifi hotspot feature when I want hop online with my G-Tab (my work monitors wifi, as well but I only turn it on as I need it.) I can't speak for BlackBerry phones but any "rooted" Android phone should be able to act as a 3G/4G hotspot.
Wifi tethering should be faster, but USB tethering and keyboard & mouse support are needed and should work in the first place. (keyboard and mouse support at least should).
Need a program like http://android.gval.biz/ or ibluever for iphone/itouch then the g tablet would be my laptop replacement for traveling .
nicholas621 said:
Need a program like http://android.gval.biz/ or ibluever for iphone/itouch then the g tablet would be my laptop replacement for traveling .
Click to expand...
Click to collapse
I've tried to run this on VEGAn ROM, configured but at the moment when It suppose to scan for Channels, it exits of message "Failed To connect to SDP server on device Blackberry 9000".... ideas?
nicholas621 said:
Need a program like http://android.gval.biz/ or ibluever for iphone/itouch then the g tablet would be my laptop replacement for traveling .
Click to expand...
Click to collapse
Are you looking for DUN over BT? If so, have you tried this:
http://www.appbrain.com/app/pdanet/com.pdanet
Jim
I believe PDAnet requires client windows/mac software, and they haven't written client Android software.
I haven't seen anyone port the Archos home-grown BT tether to any other brand. BT tether isn't part of Android (I'm betting the cellcos in OHA demanded it not be built).
My wife has Joikuspot on her phone, so she wifi tethers on the G-tab.
I have unlimited bluetooth data, so I bought an Archos.
ml_boston said:
I believe PDAnet requires client windows/mac software, and they haven't written client Android software.
Click to expand...
Click to collapse
You are right PDANet wont work as no client for Android, but from my experience listed above blackberry refusing connections.... or may be GTab just doesn't opening connection properly.
When I check GTable BT device property from Blackberry side it can do only:
Handsfree Audio Gateway
Headset Audio Gateway
Object Push
AV Remote Control Target
.... there is no DUN in the list, so I suspect it just not supported by BT stack on device.... but also I have in same my laptop listed as well which doesnt have DUN in its services
Hi,
I'm currently running a stock Desire S and whilst I'm generally very happy with it there's one glaring omission - Bluetooth DUN tethering. I want to use my phone with the Mercedes Comand Online system, which uses Bluetooth DUN to connect to the internet. The default answer seems to be to use PdaNet, but I have tried the latest version 3.02 and it doesn't work. I know PdaNet works in as much as I can connect my laptop over DUN, but it won't connect through the car. I did wonder if it was because my phone is set up to use a proxy server on its connection but there's nowhere to enter this in the car - having said that, though, I did no configuration on my laptop and it just worked. I emailed June Fabrics who say they will try to support this in some future release, but in the mean time is there any other option?
Cheers,
Tim
Hi,
I'm new to this forum, but was looking all over the place to check how to get full bluetooth support with the DUN profile on my stock HTC Desire S.
Like tj80, I'm also keen to connect my Desire to my car (Toyota with the new Touch&Go system, which has DUN/PAN support).
Any ideas are welcome
I have the exact same issue with my merc as well. pdanet just doesn't work.
I don't really want to use a blackberry
Sent from my GT-I9100 using Tapatalk
I emailed JuneFabrics about PDA Net and also MobileStream about Easy Tether - both said they "might" implement full DUN but it's not a priority. I really don't understand why nobody thinks it's important given that it's the standard way of connecting mobile phones to other devices for data - TomToms for live traffic, lots of car manufacturers, etc, there was even an article on the BBC website today about how connected cars were the next big thing!
Cheers,
Tim
Download BlueDUN Trial app from Google Play, it works fine for Mercedes Benz Comand OnLine and also for Toyota Touch&Go (from version 1.12 )
New version was tested for Tom Tom Rider too
Thanks MikiBest. You made my day! Glad I could be of help
I am using ARHD ROM (with Bricked Kernel).
My car can access and read out RSS threads and has a lot of interactive media functions, including being able access the internet via my bluetooth enabled phone. But I can't seem to get it to work fully, and really don't know if it is a ROM / Kernel / Phone issue or a car issue. I just don't know enough about the various bluetooth protocols etc, and as much as I research it, I keep going around in circes.
The car will connect to the phone and work fine as a bluetooth headset for telephone calls. It will also display the caller picture without issue and will access and read out my emails (using stock sense Mail client) and SMS messages. It also seems to connect to audio OK (although I never use it as it has a USB port that will accept a pop drive, so all my music is on the dashboard).
But the internet connection doesn't seem to work. I have looked into this and can't work out if it is a PAN or DUN profile issue. Soemtimes I can get the phone to show an internet connection being available to the car, sometimes it doesn't depending on which ROM I use and I can't seem to get any to work regardless.
Looking on the website, it claims the following:
How can I configure my mobile device for internet or BMW TeleServices usage?
In the operating manual of your mobile device you will find instructions on configuring “Access Point Name (APN)”; other names for this may be “Internet Settings”, “Modem Settings” or “Tethering Settings”. The required settings are available from your service provider. Please note that most Sony Ericsson mobile devices only recognise the first entry in the APN list, so it is recommended that all other APN configurations be deleted.
Can somebody please help me with this. I really am baffled as to how to get this to work.
Sent from my HTC Sensation Z710e using Tapatalk
Bump. Anybody?
Sent from my Motorola DynaTAC using Tapatalk (feels like it at times with this phone)
It has been a year or 2 since I got bluetooth networking going. Today I tried to get my phone to connect to my windows 7 desktop and.... it couldn't even connect sadly enough. Anyways this is from memory so it may or may not be correct. I don't like posting incorrect stuff because you never know who will read/flame.
1. pair your phone to the other device
2. connect via bluetooth your phone to the other device
3. I used the app in the link below to turn on bluetooth tether. Your kernel needs to support this feature. Just a note, there are 2 apps off the link. One is wifi only, the other does bluetooth and wifi. Assuming you get this app, turn on bluetooth tether. I don't know if you should turn tether on then connect bluetooth. Maybe it doesn't matter.
4. This step I don't quite understand. The bluetooth tether should "offer" a network service to the remote device. The remote device in turn must recognize the service and use it. DHCP is the easiest to auto configure everything. If you need a name server, use 8.8.8.8 since that is a public dns server by our google overlords.
http://code.google.com/p/android-wifi-tether/