Is there an apps that auto enforce pair on detect?
It seem my jabra 500 on my car hardly ever auto pair up as soon i enter range.
Seems like an odd question... pairing and connecting are two seperate things... once paired, you don't have to pair again, then connection will happen automatically when you're in range... I would think about replacing your jabra, as it seems to me that it doesn't work...
that, or re-flash your x10, as it's probably just not working properly.
Android seems hopeless and connecting automatically after pairing. Never got it to do it, not with any device of any sort.
Related
So I am running Vegan 5.1(Which I love), and I just got a new Bluetooth headset which I tried to connect to my tablet so i can play music to my headset during class, however to connect you need to set up with a "0000" pin, which my tablet never asks for. It just says "paired, not connected" and will never connect cause it cant without sending the security pin, is there a way to enable this in vegan 5.1?
Well it depends on the bluetooth you bought because some don't need the pairing code if your in pairing mode hopefully it is A2DP compatible because that's the only way to get music to the headset
My motorola s9 headset said paired but not connected then I long pressed it and I got some other options including connect. The next time it paired automatically but my tab is crashing (and it did) so the very next time after that I had to actually type the pair key 0000 after the long press.
I need to wipe and reinstall everything but I am just waiting till it is totally unusable.
gunsjoe said:
My motorola s9 headset said paired but not connected then I long pressed it and I got some other options including connect. The next time it paired automatically but my tab is crashing (and it did) so the very next time after that I had to actually type the pair key 0000 after the long press.
I need to wipe and reinstall everything but I am just waiting till it is totally unusable.
Click to expand...
Click to collapse
I've done long press and i only have 3 options: Connect, Unpair, Options. Options just has Connect and use device for audio options, but neither let teh device connect nor give the option to enter the pin. Any ideas?
I am running vegan mod, so when you click connect it doesn't? That seems odd... removed dumb question.
I realize this thread is a couple of weeks old but I am having a similar problem and wondered if you ever figured it out.
I am able to connect to my headset and use it to listen. However I have a Creative D100 bluetooth speaker that won't work. It will connect but as soon as I close settings and then start playing music or videos it drops the connection.
JoeMofknDot said:
Well it depends on the bluetooth you bought because some don't need the pairing code if your in pairing mode hopefully it is A2DP compatible because that's the only way to get music to the headset
Click to expand...
Click to collapse
or you can use supermono pro
it sends any sound through bluetooth.
i use it for my music and pandora on my phone.
unfortunely my headset wont connect either. what i did to get it to connect is this:
make discoverable
unpair
long press on device and press connect and pair
i can get the pin this way but mine still wont connect. just paired ;(
It is an A2DP speaker. Works great with my Iphone but would love to be able to use it with my gtab for watching Netflix and Hulu through Playon.
It connects fine the connection indicator on the speaker even comes on but as soon as I try to play any type of media the connection drops.
Figured it out. It works fine if I am connected via wifi. If I'm tethered to my phones ad hoc network The bluetooth speaker drops the connection. Guess bluetooth doesn't like ad hoc networks
OK, so I am curious as to whether or not anyone else is having issues with the A2DP performance on this guy. When it works its great, sounds pretty good for BT. But here are two issues I have found.
When playing music over bluetooth, get/make a call it switches to handsfree fine, but when is switches back it the music clips on and off.
2nd. It seems to only pair with one A2DP device. I have a blackberry bluetooth gateway which works great. But when I pair it to my pioneer head unit, it only connects to the hands free profile, not A2DP. My deck works fine on all my other devices. I have to delete both pairings, reboot, and re-pair.
Idk but are they Bluetooth 4.0 compatible?
Hey,
So I do not have my HOX yet but your problem reminds me of another issue with bluetooth on some other phones.
Try this when you set up your pairings make sure you pair it FIRST whit the device you want to do A2DP streaming on (probably your head unit) then set it up with any other devices. Some times some phones or bluetooth head units will only connect A2DP with the first devices that it is paired with (what is some times considered the primary device).
Also when it cuts out on your rather than messing with your phone shut off your head unit or BT mount for like 15 seconds and turn it back on. Also toggle it off on your phone then toggle it on after the units are powered up. I had that bug with music after a call happen a lot in the past but it turned out it was my BT unit on my visor (it needed a firmware update) but still shutting it off would usually fix it.
EDIT
Also see if you can update the firmware on your BT units. If the phone is using 4.0 and they are using 3.0 there could be some comparability issues.
I have issues with my bluetooth also. Sometimes it just won't connect to my car's bluetooth. Usually it seems like it happens when it connects then i turn off the car, then when i go back in the car(like running in to the store real quick then coming back out) and it wont' reconnect unless I restart the phone. Not sure what the problem is.
I have an TF101 running 4.0.3 stock rom, rooted with ViperMOD.
I have a bluetooth speaker, HMDX Audio HX-P230.
It won't pair with my device.
My tablet will see the speaker, but when I try to pair them it gives me an error: cannot communicate with [bluetooth ID].
Now, I know the bluetooth in my tablet works because I use a PS3 control via bluetooth.
I tried resetting my tablet, and disabling and reenabling the bluetooth.
I made ABSOLUTELY sure Sixaxis Controller was not running or started or active in any way.
I know the speakers work because they will pair with my phone.
So why won't they work together?!?!?!?
BornInTheJunkyard said:
I have an TF101 running 4.0.3 stock rom, rooted with ViperMOD.
I have a bluetooth speaker, HMDX Audio HX-P230.
It won't pair with my device.
My tablet will see the speaker, but when I try to pair them it gives me an error: cannot communicate with [bluetooth ID].
Now, I know the bluetooth in my tablet works because I use a PS3 control via bluetooth.
I tried resetting my tablet, and disabling and reenabling the bluetooth.
I made ABSOLUTELY sure Sixaxis Controller was not running or started or active in any way.
I know the speakers work because they will pair with my phone.
So why won't they work together?!?!?!?
Click to expand...
Click to collapse
I'm going to assume that you have tried the pass code of 0000 when pairing the 2 devices. While they are SUPPOSED to work with "all tablets," the majority of the time the manufacturers think ONLY of a tablet as an iPad, instead of the many Android variants out there. Some tablets in the settings you HAVE to enable audio over bluetooth, while others do it automatically.
Also I've found often times when trying to pair devices the one that you want to pair with i/e your speaker, turn it off wait 15 seconds, turn it back on and make sure that the lights are flashing showing it is searching for a host. Then under the tablet settings have the tablet search for the device, and try to pair with it. It will either do 1 of 3 things. Auto pair without prompting for the pass code, or it will put the pairing on hold until you input the pass code, in this case 0000, or it will fail.
You might have to go into your phone and "forget" the pairing connection with the speaker for it to be able to be found and used by another device.
Has anybody else had trouble getting the Z3 to pair with your car's head unit? I have an Alpine CD player with bluetooth which paired fine with my Galaxy S4 but won't connect to the Z3. It fails because of an incorrect pin. However, the phone never prompts me to enter a pin. I've read that this is a known issue with Sony devices where they hard code the pin in as 0000 so if the device you're trying to pair with has it set to 1234 for example it will just fail. I've tried several suggestions such as trying to share a contact to the cd player via bluetooth to force the pairing as well as a couple of apps that try to pair with the device but they all seem to use the system's bluetooth pairing app.
Anybody else having this problem or know of a workaround/solution?
Thanks
Iam not sure if my situation is quiet the same but My bluetooth works fine when transferring pictures but recently tried to play music through bluetooth and although both devices paired up , They dont stay connected? It connects and then disconnects within a second or two!!
I found the solution to my issue in case it helps anybody else. With Alpine (perhaps others) you can only have 3 devices paired at once. My old phones were still stored so I had to clear them. So really it was just a case of terrible error messages. The head unit just said "Failed" when it didn't connect and the phone said incorrect password or pin so neither were helpful.
Guys, I have a BT device in my car that is connected to my car audio system. I've set up my nexus 5 to connect to it, and it works great, but there is one flaw - the phone won't auto connect to it when I turn it on, I will have to turn BT off and back on on my phone for it to discover the car BT and then it will immediately connect to it. *I always leave the BT on on my nexus5 in hopes that it will auto connect but in never does, only auto connected about 4 times out of the dozens of times iv'e used it. any ideas?
omricn said:
Guys, I have a BT device in my car that is connected to my car audio system. I've set up my nexus 5 to connect to it, and it works great, but there is one flaw - the phone won't auto connect to it when I turn it on, I will have to turn BT off and back on on my phone for it to discover the car BT and then it will immediately connect to it. *I always leave the BT on on my nexus5 in hopes that it will auto connect but in never does, only auto connected about 4 times out of the dozens of times iv'e used it. any ideas?
Click to expand...
Click to collapse
I don't know if this is a flaw with your Bluetooth device or your phone. I have some devices that auto-connect and some that don't. I doubt you car BT device will have many options (if any) but maybe check and see (if you haven't already) if it has an auto-connect option or something along those lines.
Do you have any other BT devices you can test connecting and disconnecting to/from like you would your car? Eliminate if it's the stereo or your phone. You could also using something like Tasker and create a profile to do what you want. Just a thought.
Hope this helps.
It's most likely the fault of your cars Bluetooth system. Some just don't reliably autoconnect. Try a kinivo bt module 40 bucks on Amazon, works perfectly.
FourPointedFreak said:
I don't know if this is a flaw with your Bluetooth device or your phone. I have some devices that auto-connect and some that don't. I doubt you car BT device will have many options (if any) but maybe check and see (if you haven't already) if it has an auto-connect option or something along those lines.
Do you have any other BT devices you can test connecting and disconnecting to/from like you would your car? Eliminate if it's the stereo or your phone. You could also using something like Tasker and create a profile to do what you want. Just a thought.
Hope this helps.
Click to expand...
Click to collapse
Hey buddy, thanks for the thoughtful reply, I'll try and see if I can find another BT device to test my phone with. One thing I did test today, that I don't do every day, is to turn my phone BT off and back on BEFORE turning on the BT device I have in my car, then I turned the device on, and it connected immediately.. This shows its more likely to be a fault with the phone..
Lokke9191 said:
It's most likely the fault of your cars Bluetooth system. Some just don't reliably autoconnect. Try a kinivo bt module 40 bucks on Amazon, works perfectly.
Click to expand...
Click to collapse
I'll try and find it on ebay, Amazon does ship to my country but for some reason the shipping cost is the same or sometimes more than the item itself..
my BT device connects to phone on power up, e.g. when start car
Well, today it auto connected, I got in my car with my son, and didn't have a chance to unlock the phone to check if it connected to the BT, but when I checked, about 20 minutes after getting in my car, the BT was connected. this got me thinking maybe there's a connection delay, when I'll leave work today I'll see if it'll connect on it's own after leaving it alone.
omricn said:
Well, today it auto connected, I got in my car with my son, and didn't have a chance to unlock the phone to check if it connected to the BT, but when I checked, about 20 minutes after getting in my car, the BT was connected. this got me thinking maybe there's a connection delay, when I'll leave work today I'll see if it'll connect on it's own after leaving it alone.
Click to expand...
Click to collapse
I use PlayerPro to autostart playing when bluetooth is connected. It's better than PowerAmp.
omricn said:
Well, today it auto connected, I got in my car with my son, and didn't have a chance to unlock the phone to check if it connected to the BT, but when I checked, about 20 minutes after getting in my car, the BT was connected. this got me thinking maybe there's a connection delay, when I'll leave work today I'll see if it'll connect on it's own after leaving it alone.
Click to expand...
Click to collapse
Mine won't auto connect to bluetooth until I've gotten far enough from my house that my phone disconnects from WiFi. Maybe this was what you experienced too? I'm unsure.