Related
Hey guys,
I just used a flashtool to upgrade to android 2.1 today since the official upgrade isn't available yet. Everything is working well, except i'm not able to use 3g. Is there anyone out there who might be able to help me remedy this problem, or at least tell me what I probably did wrong? I'd really appreciate it.
The official upgrade is out there. Plug your phone into your computer and update from the se software
Sent from my X10i using XDA App
I have the X10a. and whenever I plug it in to use the PC companion for upgrade it said my phone was up to date even with android 1.6. Was I missing something?
Alright i figured it out. I just needed to add the att apn infornation to the phone. Aftet that it worked like a charm
Helllp!
I have been trying to root my x10a. I managed to get to the point where superuser is on the phone but it does nothing. I tried to update the superuser as the message went something about 'bin v su' and update but the update failed. I tried to use superone click and got it to state that root files are in the phone now, but I tried to use titanium backup and it says must be rooted. I spent the last few days forum hopping to find a solution, downloaded SDK setup and all platforms and tried to manually put in code from the cmd.exe and it gives me something about adb is not recognized as a command. I googled the error and tried some of the recommended fixes at sxeveral sites, but I have had no luck with instituting superuser to full function. I am sure I am doing something wrong but I know I'm close. HEY YOU GUYS! (electric company on PBS)
KelvinMead said:
The official upgrade is out there. Plug your phone into your computer and update from the se software
Sent from my X10i using XDA App
Click to expand...
Click to collapse
The official upgrade is not out there in all markets. SE is setting a record for the time frame required to diseminate an upgrade globally. Comical.
You have to input the APN Settings for your carrier manually.
I do not understand and I intend upon putting 2.1 in it after its rooted, but it tells me that I need to flash into recovery for SU, but I can't back up the phone without proper root...or can I? Please more info. I generally do not ask for help, but I am in up to my nostrils with this and I want to succeed. I have tried superone click, I downloaded androot, but i CAN'T EVEN GET THAT TO RUN. Several others and manual. So do I flash from here? with no back up? and if so, how to flash to recovery, please. thanks.
cellphonedestroyer said:
I do not understand and I intend upon putting 2.1 in it after its rooted, but it tells me that I need to flash into recovery for SU, but I can't back up the phone without proper root...or can I? Please more info. I generally do not ask for help, but I am in up to my nostrils with this and I want to succeed. I have tried superone click, I downloaded androot, but i CAN'T EVEN GET THAT TO RUN. Several others and manual. So do I flash from here? with no back up? and if so, how to flash to recovery, please. thanks.
Click to expand...
Click to collapse
If you are on 1.6, then SuperOneClick will not work. You need to be up to 2.1 for SuperOneClick to work. I do not know Androot though.
Thanks I will search how to input the APN and check in from here.
OK, I am trying to root my X10 and this is the first time that I have tried to do something like this. I am on step 2 of a guide which is to enable USB debugging and run 2_root_system, but every time I try to do it, it says "Error: Device not found" please help as I did the flash downgrade to start the process and my phone is really basic right now.
Thats very similar to the issue I'm having. Its related to the USB driver. However, I can't seem to find the USB driver to talk to the phone so that the root can be sideloaded to the phone.
im from india, i hav an unlocked at&t grey market piece. It shows on my PC companion dat d latest software is installed on d fone. how do i g8 it from 1.6 to 2.1 o betta?
Hey guys,
So today I decided to root my phone. I want to be able to use WiFi tethering without paying their ridiculous monthly fee, so I came here and read all I could about rooting my phone.
I downloaded the "Charge Kit V2" and proceeded with the instructions to install the "EE4stock_DXC.tar.md5" file to my phone. Everything worked as advertised and was completed in less than three minutes. I boot the phone, select the reboot option, and everything appears exactly as I left it.
Thinking I was rooted I downloaded the Android WiFi Tether app, but the thing won't work! So I go back to the FAQ and read that I could check to see if I were rooted by downloading a terminal emulator and typing "SU" into it. I did, and got "Permission Denied". I'm thinking this means I'm not rooted...
Am I rooted? If not, what did I do wrong? If so, why won't my WiFi tether work?
Thanks everyone!
ON edit: Just downloaded a root checker...apparently I'm not rooted. What could have gone wrong? Is the file I installed not rooted?
TomB985 said:
Hey guys,
So today I decided to root my phone. I want to be able to use WiFi tethering without paying their ridiculous monthly fee, so I came here and read all I could about rooting my phone.
I downloaded the "Charge Kit V2" and proceeded with the instructions to install the "EE4stock_DXC.tar.md5" file to my phone. Everything worked as advertised and was completed in less than three minutes. I boot the phone, select the reboot option, and everything appears exactly as I left it.
Thinking I was rooted I downloaded the Android WiFi Tether app, but the thing won't work! So I go back to the FAQ and read that I could check to see if I were rooted by downloading a terminal emulator and typing "SU" into it. I did, and got "Permission Denied". I'm thinking this means I'm not rooted...
Am I rooted? If not, what did I do wrong? If so, why won't my WiFi tether work?
Thanks everyone!
ON edit: Just downloaded a root checker...apparently I'm not rooted. What could have gone wrong? Is the file I installed not rooted?
Click to expand...
Click to collapse
I don't think that package is rooted, or at least it didn't root you when flashed (which happens sometimes).. use odin to flash CWM, boot straight into it and flash the superuser apk, when you boot up update the superuser app in the market and update the binary, after that you'll be rooted no problems
http://db.tt/4b3IK0C <--- superuser
blazing through on my 4G Droid Charge
Thanks for the reply!
Is there a good page with instructions on how to do this? I'm paranoid about bricking my phone and very new at this! Does the CWM load the same way the other.tar.md5 loaded?
What is a CWM?
Tried searching and didn't come up with much.
Thanks!
TomB985 said:
Thanks for the reply!
Is there a good page with instructions on how to do this? I'm paranoid about bricking my phone and very new at this! Does the CWM load the same way the other.tar.md5 loaded?
What is a CWM?
Tried searching and didn't come up with much.
Thanks!
Click to expand...
Click to collapse
this: http://forum.xda-developers.com/showthread.php?t=1160580 is a pretty good info thread on how to flash and what everything is though it's a little dated and most of the roms/CWM files are older, everything else like drivers and Odin versions are fine... CWM is short for ClockWorkMod recovery and along with Odin is what we use to flash roms/kernels/etc. to our phones, and yes in Odin it goes in the same PDA spot as a rom and flashes like normal... however since you don't have a custom kernel to make CWM 'stick' in your system its one time use after you flash it in Odin and you will have to Odin flash it again every time you want to use it, making it perfect if all you want to do is simply root the phone
Please use the Q&A Forum for questions Thanks
Moving to Q&A
THANKS!!!
After tinkering with it a few times, as well as a scare with a failed flash and temporarily bricked phone, I got it to work! I'm now rooted and have successfully run the tethering app with no errors.
Thank you for your time, you made this easy! And I didn't destroy my shiny new phone!
TomB985 said:
After tinkering with it a few times, as well as a scare with a failed flash and temporarily bricked phone, I got it to work! I'm now rooted and have successfully run the tethering app with no errors.
Thank you for your time, you made this easy! And I didn't destroy my shiny new phone!
Click to expand...
Click to collapse
nice glad to hear it, its a piece of cake after you do it once and learn it
blazing through on my 4G Droid Charge
I don't know why ADB is not working while normally booted! It works when in recovery, please help me. I am using Senseless version 3.7.1
cwest31 said:
I don't know why ADB is not working while normally booted! It works when in recovery, please help me. I am using Senseless version 3.7.1
Click to expand...
Click to collapse
Read this entire guide.
blackknightavalon said:
Read this entire guide.
Click to expand...
Click to collapse
koooooooooooool
reinstalled sdk following instructions carefully! its not an sdk problem
cwest31 said:
reinstalled sdk following instructions carefully! its not an sdk problem
Click to expand...
Click to collapse
ADB is part of the SDK.
Sent from a message in a bottle.
cwest31 said:
I don't know why ADB is not working while normally booted! It works when in recovery, please help me. I am using Senseless version 3.7.1
Click to expand...
Click to collapse
There is literally no information in this posting that someone can use to help you.
Blackknightavalon's direction to the SDK webpage is about as helpful of a reply as you can expect to solicit with the information you have provided.
This is like going to a car forum, and saying " I have a blue camaro. It won't start. I tried turning the key. Help please"
What commands are you trying to run through adb?
What errors are you getting, if any?
What do you see when you type "adb devices"
What operating system are you running on the computer you are trying to connect from?
Have you turned on "usb debugging" in the options menu on the phone?
There are a whole lot of things that can be your problem, and we'd love to help, but we can't help you if you don't tell us what's wrong.
Doubtless someone else will get back to you before I get a chance to, since my time is very limited these days online, but posting some more information about your problem will elicit a response that may actually help you.
Best of luck!
Blue6IX said:
There is literally no information in this posting that someone can use to help you.
Blackknightavalon's direction to the SDK webpage is about as helpful of a reply as you can expect to solicit with the information you have provided.
This is like going to a car forum, and saying " I have a blue camaro. It won't start. I tried turning the key. Help please"
What commands are you trying to run through adb?
What errors are you getting, if any?
What do you see when you type "adb devices"
What operating system are you running on the computer you are trying to connect from?
Have you turned on "usb debugging" in the options menu on the phone?
There are a whole lot of things that can be your problem, and we'd love to help, but we can't help you if you don't tell us what's wrong.
Doubtless someone else will get back to you before I get a chance to, since my time is very limited these days online, but posting some more information about your problem will elicit a response that may actually help you.
Best of luck!
Click to expand...
Click to collapse
Make sure you have current adb drivers for your phone. It will show android composite in device manager. Fastboot will show fastboot device. Seeing a yellow question mark is bad.
Make sure your pathing is set up right.
Typing "adb devices" and if you see your device. If so you're ready to roll.
I usually get fastboot errors like this when I don't have drivers installed right.
sent from my Agent Orange MT4G Slide using xda premium
Droidmoder said:
Make sure you have current adb drivers for your phone. It will show android composite in device manager. Fastboot will show fastboot device. Seeing a yellow question mark is bad.
Make sure your pathing is set up right.
Typing "adb devices" and if you see your device. If so you're ready to roll.
I usually get fastboot errors like this when I don't have drivers installed right.
Adb is part of the adk. It's to help debug and install things via a directlink to the computer. Its found in platform tools and is considered a dev tool.
sent from my Agent Orange MT4G Slide using xda premium
Click to expand...
Click to collapse
sent from my Agent Orange MT4G Slide using xda premium
I get Error Message with ADB
Hey guys, so I perm rooted with S-OFF my mytouch 4g slide, with theunlockr.com youtube video and guide using revolutionary. then I attempted to install a ROM with ROM MANAGER, and it got stuck on the splash/loading screen. After some searching I found out that this meant that I could have potentially BRICKED the phone, so I followed theunlockr.com's guide to UNROOTING the phone, and it worked, I flashed the original stock tmobile rom, and it loaded fine, I tried to start the whole process again, but now I get stuck in the very beginning, trying to get TEMP root, I start the fr3vo exploit like the guide stated, but then i keep getting error messages on the command line prompt saying that there is an error with ADB, then when I power the phone with volume down and power, the revolutionary is no longer on the top of the screen, but it still says SHIP S-OFF. Does that have to do anything with my problem? is there a way to GET S back to ON, so I can start the process over? or am I better off having S off??? I installed ROM MANAGER and tried to flash a recover image thinking that having S off would allow me to do this, but I get error messages saying there are problems with the permissions. the web site for the guide I used to root is this one incase anyone wants more details into what I did, any help would be greatly appreciated. theunlockr.com/2011/09/09/how-to-permanently-root-and-gain-s-off-on-the-t-mobile-mytouch-4g-slide-revolutionary-method
Use perm root method. Myself I flashed oneclick in recovery, but you can follow the guide the perm root part.
Btw rom manager supports flashing of the new cwm only. I checked the roms in rom manager they aren't supported. You have to go to the cm7 thread here and download and flash cm7 from recovery.
Just redo root process and install cwm from rom manager. Then go to the dev section and flash your favorite rom in recovery. My sig has directions on how to do everything.
Also if you're having permissions error use root explorer on the rom manager apk make sure it has execute checked. Also I think rom manager has a fix permissions button. Its never worked for me.
S off will allow flashing of cwm. However you need to be rooted to flash cwm threw rom manager. My sig has a guide on installing cwm without being rooted.
sent from my Agent Orange MT4G Slide using xda premium
Thanks for the QUICK reply, but I looked at the guide, and it stated I have to have recovery installed, BEFORE I do the perm root method, but I dont have recovery, when I do HBOOT, and I try to boot into recovery, I get a red exclamation mark on the screen and I have to end up taking out the battery. Thats why I was wondering if having S OFF from the beginning now is what is messing me up when I am trying to ROOT again, I mean, I am doing the same steps.... just now I get errors when I try to do the TEMP root step... so I cant continue... and I cant get ROM MANAGER to flash a recovery image... is there a guide or steps someplace that can guide me to root the MT4G slide already having S off?
I found the problem myself, I had to enable USB Debugging.
I had USB debugging enabled.... hmmmm you made me doubt myself... I guess I will try it again, since I flashed stock rom again all settings were reverted... so I cannot VERIFY I had USB debugging on, but I was sure I did... I will try again and post... I am reflashing the stock rom like 5 times a days trying to root again =(
wait... cwest31, you had which same problem? because I was writing about 2 problems: about booting into recovery with S off, but no recovery image (hence I got red exclamation mark), and trying to get ROM MANAGER to flash a recovery image on my phone since I have S off already, but I get error messages (problem with permissions)
RT2023 said:
I had USB debugging enabled.... hmmmm you made me doubt myself... I guess I will try it again, since I flashed stock rom again all settings were reverted... so I cannot VERIFY I had USB debugging on, but I was sure I did... I will try again and post... I am reflashing the stock rom like 5 times a days trying to root again =(
wait... cwest31, you had which same problem? because I was writing about 2 problems: about booting into recovery with S off, but no recovery image (hence I got red exclamation mark), and trying to get ROM MANAGER to flash a recovery image on my phone since I have S off already, but I get error messages (problem with permissions)
Click to expand...
Click to collapse
Umm...did you read the full instructions very carefully? When you get to the part where you flash the Superuser .zip file, you need to try it several times before it'll hold.
blackknightavalon said:
Umm...did you read the full instructions very carefully? When you get to the part where you flash the Superuser .zip file, you need to try it several times before it'll hold.
Click to expand...
Click to collapse
What he said.
Also ROM MANAGER WILL NOT WORK UNLESS ROOTED. Get rooted then try flashing the image. The compendium also has step by step guides using terminal emulator once rooted
sent from my Agent Orange MT4G Slide using xda premium
Also I want you op and the other one to be clear on what s off is and root.
Getting S OFF allows unsigned zips to be flashed. This means you can now flash roms and root. Without s off you cannot root, rom, kernels. S OFF is not root.
Root is gaining admin rights over your phone. this allows programs that require access to the root files to have access to them. ROM Manager, titanium backup, drocap, setcpu will be granted access to the root files and programs which unrooted phones would not be granted access .
This can be a reason why you two are having trouble using rom manager unrooted. Rom manager cannot access the files it needs
sent from my Agent Orange MT4G Slide using xda premium
Please go follow this thread ---> http://forum.xda-developers.com/showthread.php?t=1178606. It tells you how to Permanently root a device that is already s-off.
AWESOME!!! turns out i just had to run revolutionary TWICE, and the second time it figured out it was already rooted and then asked if I wanted to install recovery, I dont know how to do it manually so I clicked yes, and THEN i was able to go into recovery and flash the PERM root ZIP, rebooted and i had SUPERUSER in my app drawer!!!! awesome, now to try to get the version of google talk installed that actually allows for video chat!!! I HATE QIK!!!!!!
DROIDMODER, CWEST31: Thanks so much for the lenghty explanation and help. I have loved android for the ability to customize, and I had the G1, MOTOCLIQ, G2, and now MT4GS, I rooted my G2, but didnt do anything to it because i was scared to F it up, but with the MT4GS I got the balls to do it just because I was SOOOO UPSET that the phone comes with a version of GTALK that does NOT ALLOW FOR VIDEO CHAT!!?!?! WTF!!! whats the front camera for then?! and QIK sucks, not all my friends are on tmobile... i was even more upset when the HTC AMAZE has a version of GTALK that does allow for video chat straight out of the box!!! this is my main push to wanting to root... thanks for letting me vent! lol and thanks for all your great info
RT2023 said:
AWESOME!!! turns out i just had to run revolutionary TWICE, and the second time it figured out it was already rooted and then asked if I wanted to install recovery, I dont know how to do it manually so I clicked yes, and THEN i was able to go into recovery and flash the PERM root ZIP, rebooted and i had SUPERUSER in my app drawer!!!! awesome, now to try to get the version of google talk installed that actually allows for video chat!!! I HATE QIK!!!!!!
Click to expand...
Click to collapse
Your welcome! now procead to install undead's senseless ROM (Best Rom available) and also get rom manager and flash the official CWM recovery! Also proceed to "thank."
mmmm... I tried to install a ROM before and thats what F-ed everything up =/ I am hesitant, I really want a Gtalk version that allows for video chat, does the senseless rom have video gchat capabilities??
As the title says, I have the Samsung Galaxy SII Sprint's variation. I rooted my phone when it was on the version before Gingerbread EL29. I used the SuperOneClick method to root my phone and after doing that, 'Superuser' was installed on my phone. Everything was going fine until I accidentally updated my phone to Gingerbread 2.3.6 EL29 via Sprint's over-the-air update. I know it sounds dumb from me but I really knew that if I updated my phone I could mess up my root privileges, but that pop up update was showing up each 5 minutes, that in one of them I accidentally pressed 'install'. Now I have tried to unroot my phone with SuperOneClick but 'Superuser' is still there and when I access an app that requires root privileges like 'Wireless Tether' it says that my phone is not rooted. I also tried to do a factory reset and root again with 'SuperOneClick' but it freezes up (I guess it's because 'Superuser' is still there?) I was also thinking on installing a rooted rom but I don't know if I can install custom roms (I don't know if I have CWM and if it will mess up because I'm not rooted?..) Right now I just want to get the latest rooted stable release possible.. Sorry for extending myself but I wanted to give all the important details as possible as I am new in handling root phones and also in this forum. I will appreciate any help, thanks!
-James E.
Btw you might want to ask in the epic forums. You will get slot more help. I would use sfhub el29 oneclick
Sent from my BAD A$$ EPIC TOUCH 4G
follow the online tutorial guide below by qbking77...
http://www.youtube.com/watch?v=v7pWjmKCsoc
Thank you PakAttack1994! I watched the video and even though it didn't work at the first time, I was able to ask him my questions and he was able to answer them. If you want to see with the problems that I went through and his replies are on the video comments. I'm the user 'jamesssssss'
lol np, I just pointed you in the right direction. qbking77 deserves a whole heap of credit over me.
Hey there, Just want to thank everyone here in advance for any help and direction they give.
Got a few NOOBish question of course... but please understand ive used Google, and The search option on this forum (and others!!)
I got a Samsung Galaxy S. which im trying to root... These are my issues..
1. When phone turns on, it says VIBRANT, it clearly says Galaxy S across the back of the phone, But person who gave me the phone says its Galaxy S 4g..... I cant tell the difference of which/what phone it is.
2. I Got it a few days ago, so i updated to 2.2 froyo (via kies mini) after i connected it with with tmobile
3. Superoneclick was NOT working ,it kept hanging , and getting errors. Until a few minutes ago it told me it was successful with the root....
Then said it would send a superSU request of some sort to my phone. Then i get a "SuperSU binary needs to be updated,", then i recieve a "installation failed"
NOTE - SuperSU was installed PRIOR to root attempt.
4. Rom Manager said successful flash of CWM (i flashed the galaxy vibrant version) ..
Cant reboot into CWM recovery tho, it goes to Android System Recovery (3e)
5. I tried superSU after rebooting, and i get same error. Also when i type SU into terminal command, i still get "permission denied" (so makes me believe the phone never rooted thru superoneclick ? Obviously ? Or im wrong.... i dunno
... .Other notes, i tried z4root, by manually installing the apk via ASTRO manager, i clicked permanent root, it begins, it gives a notice of "shell being aquired" (i may be wrong on the wording.), then it vibrates the phone and shuts down. Any attempt to click z4root icon again causes a vibration of the phone. Thats all, app stays closed until reboot. Tried a few times, unsuccessfull.
I have checked a few of the other options, one was an update.zip file i found on here, but i got an error also. Then i see alot of forums mentioning flash back to 2.1 using obin, BUT most of those posts are from early 2011 ? Id assume 2.2 is capable of being rooted so much later.
So if any direction can be given, id apprecaite it alot guys n girls. For sure. Also, after root, if anyone knows of some good custom roms , or kernels.. (I do notice the lag on 2.2 BAD.)
I havent ever messed with kernels, but i did jus go thru issues rooting a metropcs wildfire S... OMG dont get me started on that thing of trash !!!....
Thanks again... ill await some responses as i search some more.
Ok so its a samsung vibrant galaxy s
Sent from my SGH-T959 using xda app-developers app
Ok... weird, but i was going thru some apps, and seen CWM needed an update, i updated it , opened it , and was asked superuser permissions.... Then went to terminal, and SU, and got the # sign. So it rooted without having to go back to 2.1 with odin.
So i am rooted now.... If anyone knows of good roms / kernels (im 100 percent unfamiliar with kernels... Roms,, ehhhhhh), for this now ?
Thanks again.
Sent from my SGH-T959 using xda app-developers app
ok.. guess noone can help ?
Did i post wrong ? I mean i did clearly state that i used the search options, and i am doing my own homework on the issue.. but still remain stuck on some of the issues at hand...
anyone ?
You likely would have a lot more responses had this been posted in the section for the device. There are a number of differences in the vibrant and the gs4g. If you still are not certain which you have, you could quickly tell by the battery... the s4g is larger. Look at the amount, google it.
Once you have the correct model, if you are still having issues go post in that section. From reading your posts, it sounded to me like you had it fixed and were now just looking for the best ROM to flash.