Restore current key mapping (with end key) - Touch Cruise Android Development

Hi
Thanks all developers to build Super Froyo.
I am using Incubus26jc's Super Froyo (RLS10) with all lang version. After I re-flash new nbh file (polaimg-panel3-320-froyo-15-07-10.nbh), the key mapping restore to current one.
Very Nice

If watch on key-thread you can find it right after the image in all possible version...

Related

Replacing KB File

Hi,
Got my Snap recently. Love it but i want to change the some KB functions like
Original:
Long press "z" ===> "Z"
Request:
Long press "z"====> "7"
Found the thread and file at
http://forum.xda-developers.com/showpost.php?p=4206197&postcount=14
but can't seem to replace the file since its a "ROM" file (Total commander). I'm using 6.1 stock ROM...Anyway i can replace the file w/o re-flashing to custom rom? Or is flashing it to 6.5 my option to customisation? Thanks.
any 1??????
I modified one for the Ozone and simply replaced it with My Mobiler. See my thread here. http://forum.xda-developers.com/showthread.php?t=553997
Does not seem to much interest in this feature, but I absolutely love it...
P
edmax said:
Hi,
Got my Snap recently. Love it but i want to change the some KB functions like
Original:
Long press "z" ===> "Z"
Request:
Long press "z"====> "7"
Found the thread and file at
http://forum.xda-developers.com/showpost.php?p=4206197&postcount=14
but can't seem to replace the file since its a "ROM" file (Total commander). I'm using 6.1 stock ROM...Anyway i can replace the file w/o re-flashing to custom rom? Or is flashing it to 6.5 my option to customisation? Thanks.
Click to expand...
Click to collapse
You need to copy (replace) after you made a backup of your file.
You will find the file in My device/Windows.
After replace the file, reboot the device. It will work, it was made from a 6.1 stock ROM.
hi,
got it to work as suggested. Thanks all

[PATCH][07/15] Spanish hardware keyboard for G1/Dream

Ok guys, I was a little tired of copying again and again my slide hardware keyboard layout files for the G1 in every ROM I flashed using terminal.
So I made a little zip file that you can patch right after your favourite ROM directly from recovery.
This patch will work (I've tested it) on every Android version from 1.5 to current 2.2, be it official or cooked ROM (tested it on KingXClick, CM, Cannon at least).
Just copy the attached file to your sd-card root and flash it out from recovery after flashing your ROM-of-choice.
Cheers!!!

Keyboard Mapping

Hello All,
I have a chinese Android phone model e1060 running 2.2.1 I can't tell you what make it is because I don't know !!! It has a built in QWERTY keyboard
that I want to change how it works. I have read that I have to modify the .bin
file in the /system/usr/keychars directory, but there are 3 files, mt6516-kpd.kcm.bin qwerty.kcm.bin and qwerty2.kcm.bin I have already rooted
the phone. Is there a way to determine which of these files I need to modify?
Thanks in advance,
Dave.

[Q] Italian keyboard mapping with HTC Rhodium100 and CM7.2 Android

Hi,
I've tried to install CM7.2 with Android 2.3.7 (http://forum.xda-developers.com/showthread.php?t=1566955) on my HTC Rhodium 100 (Italian version).
The initial installation starts with physical keyboard in US layout.
I've google like mad to find a way to change this with no success. Here's what I did:
1- unzipped the original CM7.2.0-RC1-rhodium-20120424 files
2- from /system/etc/keymaps I copied the following files:
-- rhod100_it_microp-keypad.kcm.bin in /system/usr/keychar
-- rhod100_it_microp-keypad.kl in /system/usr/keylayout
-- rhod100_it_navi_pad.kl in /system/usr/keylayout
For these files, I left them as they are and also substituted the original generic (same file name without "rhod100_it_")
3- I've hex edited qwerty.kcm.bin and qwerty2.kcm.bin to match Italian keyboard layout.
4- rezipped back to original ZIP file
5-followed install instructions as per http://forum.xda-developers.com/showthread.php?t=1566955
Result: always US keyboard layout
What should I do?
Thanks,
-Paolo

[Q] Samsung Galaxy Chat (B5330) keyboard problem

Hi, today i updated my Samsung Galaxy Chat (B5330) to 4.1.2 jellybean, and then rooted it.
All works good, but the problem, i got an azerty keyboard, and it's writing like qwerty, soo when i press a, it's writing q.
I need help quickly beaucause it's really ennoying me, thanks all of you for your help !
bigbossclk said:
Hi, today i updated my Samsung Galaxy Chat (B5330) to 4.1.2 jellybean, and then rooted it.
All works good, but the problem, i got an azerty keyboard, and it's writing like qwerty, soo when i press a, it's writing q.
I need help quickly beaucause it's really ennoying me, thanks all of you for your help !
Click to expand...
Click to collapse
Go to keyboard settings maybe?
I'M BATMAN
-DarkKnight- said:
Go to keyboard settings maybe?
I'M BATMAN
Click to expand...
Click to collapse
I already did, but it's aldready showing as azerty, but writing in qwerty ://
Try clearing data(factory reset)
I'M BATMAN
-DarkKnight- said:
Go to keyboard settings maybe?
I'M BATMAN
Click to expand...
Click to collapse
-DarkKnight- said:
Try clearing data(factory reset)
I'M BATMAN
Click to expand...
Click to collapse
Not working..
Soo can anyone help me ?
Sent from my GT-B5330 using xda app-developers app
bigbossclk said:
Soo can anyone help me ?
Sent from my GT-B5330 using xda app-developers app
Click to expand...
Click to collapse
Up, help please.
bigbossclk said:
Up, help please.
Click to expand...
Click to collapse
Up ...
bigbossclk said:
Hi, today i updated my Samsung Galaxy Chat (B5330) to 4.1.2 jellybean, and then rooted it.
All works good, but the problem, i got an azerty keyboard, and it's writing like qwerty, soo when i press a, it's writing q.
I need help quickly beaucause it's really ennoying me, thanks all of you for your help !
Click to expand...
Click to collapse
what firmware did u flash. the only problem in newest JB form spain region is just about the symbol but the layout is still in qwerty. To fix this, you shoul edit it manually or just take layout from keyboard from your ics rom to your newest JB rom.
samsung galaxy chat
n0ak said:
what firmware did u flash. the only problem in newest JB form spain region is just about the symbol but the layout is still in qwerty. To fix this, you shoul edit it manually or just take layout from keyboard from your ics rom to your newest JB rom.
Click to expand...
Click to collapse
I have the same problem. I have update my samsung galaxy chat with an offical rom to jelly bean 4.1.
But my physical slide keyboard has changed from azerty to qwerty.
I have change my screen keyboard but change my physical keyboard didn't work.
Help me please???
kasper7777 said:
I have the same problem. I have update my samsung galaxy chat with an offical rom to jelly bean 4.1.
But my physical slide keyboard has changed from azerty to qwerty.
I have change my screen keyboard but change my physical keyboard didn't work.
Help me please???
Click to expand...
Click to collapse
I Don't know about azerty keyboard layout, cause i'm using qwerty .
But u can change the key characters of physical keyboard layout on system/csc/Your region code(for spain it's PHE)/system/usr/keychars/bcm_keypad_v2.kcm.
edit it and change it using your virtual keyboard. OR you can use ICS bcm_keypad_v2.kcm from old rom (if you have your backup).
That's it. You will get your old layout keyboard and will fix forever.
============
JUST PRESS THANKS IF I HELP YOU
============
n0ak said:
I Don't know about azerty keyboard layout, cause i'm using qwerty .
But u can change the key characters of physical keyboard layout on system/csc/Your region code(for spain it's PHE)/system/usr/keychars/bcm_keypad_v2.kcm.
edit it and change it using your virtual keyboard. OR you can use ICS bcm_keypad_v2.kcm from old rom (if you have your backup).
That's it. You will get your old layout keyboard and will fix forever.
============
JUST PRESS THANKS IF I HELP YOU
============
Click to expand...
Click to collapse
And how u do that? I don't have much experience i change the key characters. Do u have to root your mobile Phone?
kasper7777 said:
And how u do that? I don't have much experience i change the key characters. Do u have to root your mobile Phone?
Click to expand...
Click to collapse
Of course you should. How can you edit your system without Root? Just edit the key i mention above. Before that click on screen keypad on the "language and input setting". And then just take look for chars that you think miss, then fix it using your virtual keyboard.
You can use root explorer to do that.
Hope this will help you. Press thanks if yes.
Solution
You can replace original bcm_keypad_v2.kl with the file you find at link http://ge.tt/4nhbXzg/v/0?c
You can push it into windows file manager and the use for example Root Explorer (yes, root before your phone) to copy it to system>usr>keylayout
The button to access to chatON don't run. If you want set it, before open the file and replace CUST1 with CHATON.
warrell said:
You can replace original bcm_keypad_v2.kl with the file you find at link http://ge.tt/4nhbXzg/v/0?c
You can push it into windows file manager and the use for example Root Explorer (yes, root before your phone) to copy it to system>usr>keylayout
The button to access to chatON don't run. If you want set it, before open the file and replace CUST1 with CHATON.
Click to expand...
Click to collapse
small tutorial to change galaxy chat b5330 keyboard layout from spanish to english or other
so
you have customer customization files, that means folder /system/csc
here you can find all keyboard layouts
CPW folder contains custumization data for britain
for other layouts check it yourself
in PHE are the spanish
now you can:
a:
delete from PHE keylayout and keychars folder contents and /system/usr/keylayout and keychar files will be active
b:
move keylayout and keychars folder contents from CPW(or your layout) to PHE folder
it works... after reboot
at least for me
and you can play with the keyboard layout now as described in other tutorials, you can simulate DPAD too, if you make one key CTRL or META, but it's not working in many apps, on launcher i can navigate
and you can add some buttons to wake up device, not to kill power key
dzsemx said:
small tutorial to change galaxy chat b5330 keyboard layout from spanish to english or other
so
you have customer customization files, that means folder /system/csc
here you can find all keyboard layouts
CPW folder contains custumization data for britain
for other layouts check it yourself
in PHE are the spanish
now you can:
a:
delete from PHE keylayout and keychars folder contents and /system/usr/keylayout and keychar files will be active
b:
move keylayout and keychars folder contents from CPW(or your layout) to PHE folder
it works... after reboot
at least for me
and you can play with the keyboard layout now as described in other tutorials, you can simulate DPAD too, if you make one key CTRL or META, but it's not working in many apps, on launcher i can navigate
and you can add some buttons to wake up device, not to kill power key
Click to expand...
Click to collapse
Hi dzsemx, I would like to ask something regarding in your reply. Is it possible to set ALT+SPACEBAR to wake my device? And also i want to use 0(zero) to open google search app. Please give me a step by step procedure if this is possible. Please? Thanks in advance!
hi
you can try to install a firmware from LUXEMBOURG
i had the same problem so i have downloaded this firmware from sammobile
My Method
I had the same problem with the keyboard, anda after a few attempts I finally bring it back to a good configuration.
1-. Root the phone of course
2-. Download a file manager and go to system/csc
3-. Here we find the hole stuff from the available countries in phone's configuration. It's important to know which is the sale code of our firmware (For example, my firmware's code is ITV, and is from Italy)
4-. Now we have to look for the correct file for our keyboard to work properly. The best solution is know the sale code of our language (For example, I have a spanish keyboard, and the sale code of spain is the Phone House España PHE).
5-. Now that we know the sale code, we go to system/csc/XXX(Sale Code)/system/usr/keychars, where we can find a file called "bcm_keypad_v2.kcm". This is the supposed correct file for our keyboard. If we dont trust, we can open it as a text file and edit with a text editor. If chracters match with sysmbols inside the file, that means that it is the correct file.
6-. We copy bcm_keypad_v2.kcm and go back right to system/csc. Now we look for the sale code of the firmware that we have flashed (ITV, in my case) and go to system/csc/YYY(Sale Code)/system/usr/keychars, and replaced the file there with the other one that we copied before.
7-. Finally, go to system/usr/keychars and there again we replaced the bcm_keypad_v2.kcm file there with the other one that copied before.
8-. Now reboot and try typing if the keyboard works right or continue working wrong. At least for me works :laugh:
My theory is that when we flash a rom, the country from where it comes their csc files are taken to system, and we have to replace both keyboard file in the csc repository and keyboard file in the current system.
I hope this will help you :good: Good luck!
darkyyto said:
I had the same problem with the keyboard, anda after a few attempts I finally bring it back to a good configuration.
1-. Root the phone of course
2-. Download a file manager and go to system/csc
3-. Here we find the hole stuff from the available countries in phone's configuration. It's important to know which is the sale code of our firmware (For example, my firmware's code is ITV, and is from Italy)
4-. Now we have to look for the correct file for our keyboard to work properly. The best solution is know the sale code of our language (For example, I have a spanish keyboard, and the sale code of spain is the Phone House España PHE).
5-. Now that we know the sale code, we go to system/csc/XXX(Sale Code)/system/usr/keychars, where we can find a file called "bcm_keypad_v2.kcm". This is the supposed correct file for our keyboard. If we dont trust, we can open it as a text file and edit with a text editor. If chracters match with sysmbols inside the file, that means that it is the correct file.
6-. We copy bcm_keypad_v2.kcm and go back right to system/csc. Now we look for the sale code of the firmware that we have flashed (ITV, in my case) and go to system/csc/YYY(Sale Code)/system/usr/keychars, and replaced the file there with the other one that we copied before.
7-. Finally, go to system/usr/keychars and there again we replaced the bcm_keypad_v2.kcm file there with the other one that copied before.
8-. Now reboot and try typing if the keyboard works right or continue working wrong. At least for me works :laugh:
all working good.. thanks for the tutorial
My theory is that when we flash a rom, the country from where it comes their csc files are taken to system, and we have to replace both keyboard file in the csc repository and keyboard file in the current system.
I hope this will help you :good: Good luck!
Click to expand...
Click to collapse
all working good.. thanks for the tutorial :good::good:
Thanks for the helpful tutorial!
This fixed my wrong keyboard layout and the shortcuts buttons.
Now only one issue still remains for me..
The "Sym" button used to switch my keyboard language but now pops up the symbols window.
This way I need to have the on-screen keyboard enabled in order to switch through languages.
Any idea which button mapping I should change to enable language switching on the "Sym" button?
I have root access so I only need to know which file and button mapping option I should change to fix this.

Categories

Resources