need to know if i bricked my nexus one - General Questions and Answers

i had n-xtreme rom flashed on my nexus one, i downloaded and tried to flash cyanogen 6 and gapps. while doing that the flash for cyanogen went fine, when i went to flash gapps it clicked on leo's froyo rom instead and flashed that. i reflashed cyanogen and gapps and rebooted, it went to the screen with the android and the arrow pointing to the box. i powered it down and when i tried to reboot it does nothing. i've tried pulling the battery. i've tried the hard reset and rebooting to the bootloader and nothing works

Related

CM9 20130120 will not boot after turning off phone

Installed cm920130120p505.zip and gapps-ics-20120429-signed.zip
The cm9 install went well. Rebooted well. Everythings appears to work fine, make and receive calls, WIFI & G3 works. Turned off the phone and it would not reboot. Just a blank screen. Tried to reboot into recovery. Won't work. Removed battery and waited. Tried recovery again. Won't work. Tried again, this time it rebooted into recovery! I then went ahead and flashed gapps thinking maybe it needed gapps. Turned off phone and it will not reboot. I sweet talked the phone into recovery and went back to Gingerbread 2.3.4.
I did the normal procedure for flashing. Wiped and formated, cleared the cache and wiped battery stats. Flashed the rom, rebooted. Everything looked great. Turned off the phone and tried to reboot into recovery and got the blank screen. You have to try rebooting into recovery by removing the battery and reinserting it and try the boot process maybe 2 or 3 times before it will work.
My Phone Stats: LG-P505, Android version 2.3.4, Kernel version 2.6.35.7-perf, Build number GRJ22, Software or Base Band version LG-P505-V20f - I am unlocked and rooted.
I did install the wrong gapps at first but I figured I could just reflash the correct one afterward and it would get rid of the old gapps. To make sure, I cleared the ROM of everything and started over from scratch 2x. Same result.

[Q]- Help! Odin "passed" but phone will not boot up completely!

Hi guys,
I have run into a problem when trying to revert my phone back to stock using odin. Here is the backstory. I was rooted running CM 10.2. Decided to try a 4.3 ROM. Flashed the new ROM successfully but noticed it was really janky when I was setting it up (clean install) and decided to flash my backup of CM 10.2. When flashing the backup, the flash only partially completed and booted into a non-functional version of my 10.2 ROM.
At this point I decided to use Odin and go back to completely stock. Ive used this a few months ago and it worked successfully. I used a tar.md5 of VRBLK3. Odin says "passed!" but when the phone tries to boot up, it gets to the verizon 4G animation and sits there cycling through that animation indefinitely.
I'm at a loss as to what to try next. Ive tried re-doing the odin flash with the same results. Thanks for any help!
Edit: Ive tried booting into the recovery and doing factory rest/wipe cache partition with no luck
Edit: Tried booted into recovery and it worked! I think im good from here.
Clear Cache
I had something similar happen several months ago. I believe the solution for me was to boot into recovery and clear out the cache.
amotamatapia said:
Hi guys,
I have run into a problem when trying to revert my phone back to stock using odin. Here is the backstory. I was rooted running CM 10.2. Decided to try a 4.3 ROM. Flashed the new ROM successfully but noticed it was really janky when I was setting it up (clean install) and decided to flash my backup of CM 10.2. When flashing the backup, the flash only partially completed and booted into a non-functional version of my 10.2 ROM.
At this point I decided to use Odin and go back to completely stock. Ive used this a few months ago and it worked successfully. I used a tar.md5 of VRBLK3. Odin says "passed!" but when the phone tries to boot up, it gets to the verizon 4G animation and sits there cycling through that animation indefinitely.
I'm at a loss as to what to try next. Ive tried re-doing the odin flash with the same results. Thanks for any help!
Edit: Ive tried booting into the recovery and doing factory rest/wipe cache partition with no luck
Edit: Tried booted into recovery and it worked! I think im good from here.
Click to expand...
Click to collapse
athensjohn said:
I had something similar happen several months ago. I believe the solution for me was to boot into recovery and clear out the cache.
Click to expand...
Click to collapse
If you didn't get it fixed, pull battery, boot into recovery and factory reset. This will clear data and cache from previous installed ROM. Odin doesn't do this for you.
Sent from my SCH-I535 using Tapatalk

HTC Desire HD - CM11 Boot Problem

Hello,
i had an old Custom Rom on the Desire HD from my girlfriend and now I tried to flash cm-11-20140916-UNOFFICIAL-M10-ace.zip. I had an old version of 4ext and tried to flash the rom. Did not worked, so i used the 4ext recovery updater to update to the newest version (v1.0.0.6 RC2). I tried to flash the rom again and it worked. I did the customisation at the beginning, that appears, when you start the rom the first time or do a factory reset. After that i installed all apps and shut down the phone. I tried to restart it and get stuck after the HTC Logo. There is only a black screen, that is lightened. I have to remove the battery to shut it down again. Tried it some times, but it did not worked. So I did full wipe and flashed cm-11-20140804-UNOFFICIAL-M9-ace.zip. I got the same problem after restarting. Does anybody know how to fix my problem?
btw, I also flashed GAPPS 4.4 PICO.
EDIT: This time I tried it without gapps and it did not work, too. I flashed CM7 and there the reboot works fine.

Phone keeps rebooting to TWRP but the ROM works

Not really sure where I should have put this but have a weird issue. I have a droid turbo xt1254 that I have rooted and flashed many times. The most recent, today, I accidentally did a full system wipe and when I went to reflash the rom already in twrp, it gave me an error.
I then tracked down cm13 for my phone, which had worked previously and reinstalled it but every time I reboot the phone, it goes straight into twrp.
I have found that If I reboot into the bootloader, I can choose factory and whichever rom I have installed works until I reboot.
Can anyone help me stop this and get it to boot straight into the rom?

NEED HELP! Twrp load screen flashing!

Unlocked my note 6 a few days ago. Was miui 10. Flashed Lineage os. Switched to AOSIP didnt like the bugs so flashed Havock 9.0. It failed flashing so I cleared cache and rebooted system. Once back in AOSIP said sd card was corrupt and couldn't be used with my device. I powered down back to recovery and I'm stuck on a flashing TWRP loading screen. It flashes 2 quick back screen lights then the TWRP screen then back off. I've tried reflashing recovery through fastboot/ different recovery......same result. Ive tried flashing a new rom to system through fastboot ect. When i restart device it will go straight to fastboot. Please help. Thanks
Flashed the recovery from this thread in Fastboot working great now!https://forum.xda-developers.com/re...guide-how-to-root-install-twrp-redmi-t3867146 None of the others I tried would work. IDK why.

Categories

Resources