Related
Out of the four cases I have tried for the Charge I think I finally found my favorite. The Trident Aegis has some problems as did all the cases I tried but it is the best. It comes in 5 colors and they look great. I got the blue one and it looks as good in person as it does on the site.
The materials used are very nice and the surface has a great anti-skid finish that provides great in hand grip. The hard plastic outer shell covers all 4 sides of the phone for a tight fit. It is thicker then the Otterbox Commuter at the phones curve at the bottom but I actually like that. It gives the phone a great feel when using it in landscape mode. Even though it is a bit bulky it does fit in pockets easily. The corners of the case are heavily padded for drop protection.
All of the ports are covered to prevent dust, moisture or any other unwanted substance getting into them. I found that the usb port was hard to open at times (I have no finger nails) and that the hdmi cover opens a little to easily. The power button and volume rocker are covered as well and easily accessible. One of the things I really like is the dust filter on the speaker opening. The speaker is loud and clear and will not be getting dust in it. The lip that goes around the screen is not as big as the Otterbox but provides just as good of protection.
The protection this case offers is great. Its not as heavy duty as the Otterbox Defender or the Trident Kracken II but it is good enough for every day use. It comes with a screen protector that I did not use. I would recommend this case without a doubt. While its not perfect its does correct the things that I did not like about the Otterbox Commuter and provides just as good of protection. If I can get access to a camera at some point I will post some pictures to go along with the review.
Thanks for all of the info. both here and via PM.
I want to hold out for the Kraken 2, but my Otterbox is driving me nuts so I might just grab an Aegis.
Rememo said:
I want to hold out for the Kraken 2, but my Otterbox is driving me nuts so I might just grab an Aegis.
Click to expand...
Click to collapse
The Kraken 2 looks pretty beast to be sure but I'm not sure if it's not just too think... Hows the thickness of it compared to the otterbox defender?
Rememo said:
Thanks for all of the info. both here and via PM.
I want to hold out for the Kraken 2, but my Otterbox is driving me nuts so I might just grab an Aegis.
Click to expand...
Click to collapse
What aren't you liking about the Otterbox? I asking because I'm thinking of picking one up for myself.
corys00 said:
What aren't you liking about the Otterbox? I asking because I'm thinking of picking one up for myself.
Click to expand...
Click to collapse
I'll second this...was thinking about doing the same. Otterbox no good?
Sent from my ADR6350 using XDA App
The top and the bottom edges of the Otterbox are not covered by the hard plastic so it is kind of loose. The buttons are also covered which I don't like and the hard plastic is kind of slippery.
corys00 said:
What aren't you liking about the Otterbox? I asking because I'm thinking of picking one up for myself.
Click to expand...
Click to collapse
I don't like how the top of the silicon portion isn't supported by the hard case, so it easily separates from the phone if you lift the phone by that area.
I also find that, while it's nice to slip in and out of your pocket, the hard case is too slippery for my tastes. It slides off of sloped surfaces and I've almost dropped the phone a few times now.
Personally, I like having the hard buttons covered, but the silicon that covers the buttons doesn't seem to fit tight against the screen, so debris can work its way underneath.
I never use the HDMI port, so not having it protected by silicon makes no sense to me.
Don't let my dislikes make it seem like it's a bad case, it's not, but I think the Aegis will fit me better. The Aegis should arrive tomorrow, so we shall see.
I'm thinking of making a short video to show the differences between the cases. I'll let you know when it's up.
Moondrius and Romemo,
Have either of you had the Incipio case before your trident case? I'm wondering how they compare. I'm surprised to see the trident case so slim since I always incorporate trident cases to be monsters.
I had the Incipio double cover and the Feather and both were sent back. The double cover was alright until I noticed it covered the hdmi port. It did seem thin and less bulky. The Aegis is the most bulky of the 3 but in a good way I would say. Its slightly thicker at the bottom. I would say I liked the Double Cover more then the Otterbox but I used it for like 5 minutes. The Feather was complete garbage. Its a shame because I really liked the Feather when I had my Atrix.
Thanks. I have the Incipio double cover. I really like it since I never use hdmi, not sure I can handle anything that would be bulkier.
Pics pl0x?
Sent from my Droid Charge running Humble 1.4
pics? link to site? something
dennis- said:
pics? link to site? something
Click to expand...
Click to collapse
For the Incipio case? It's here:
http://www.myincipio.com/Samsung-Dr...CRYLIC-Hard-Shell-Case-with-Silicone-Core.asp
Does verizon sell the Incipio case for the Charge? If so, how much do they ask for it? I really like the looks of the Incipio case and I am just trying to figure out if a covered HDMI port is worth it. I get 25% off accessories at Verizon so if the price is reasonable I wouldn't mind picking one up to try it out.
So I get my Charge on Monday. I have the cyclops series trident case for the fassy. It felt good. Overall I liked it. So I purchased the aegis. I bought it from the same ebay seller I got the fassy from: cyclopscase.
A good price too 23.33 with free shipping.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260822580193&ssPageName=STRK:MEWNX:IT
My dust cover for the hdmi port ripped off yesterday. I went to go use it and while pulling the tab off of the phone it just ripped right off. That tab is really flimsy and I used very little force around it.
moondrius said:
My dust cover for the hdmi port ripped off yesterday. I went to go use it and while pulling the tab off of the phone it just ripped right off. That tab is really flimsy and I used very little force around it.
Click to expand...
Click to collapse
Yikes... Yeah, that's a definite weak spot. I was thinking that, if I go back to my Aegis, I would just remove that cover.
Is it easy to take in and out of the case? I bought the media dock and the car dock, which leaves no room for a case. So I've been using the zagg shield that covers the entire phone. Problem is with the car dock, the sides have been tearing off due to putting the phone in and out of the dock. It's pretty useless, so I want a real case, but I don't want to buy a new car or media dock for it.
Does the Aegis come off and on pretty easily?
type_2 said:
Is it easy to take in and out of the case? I bought the media dock and the car dock, which leaves no room for a case. So I've been using the zagg shield that covers the entire phone. Problem is with the car dock, the sides have been tearing off due to putting the phone in and out of the dock. It's pretty useless, so I want a real case, but I don't want to buy a new car or media dock for it.
Does the Aegis come off and on pretty easily?
Click to expand...
Click to collapse
IMHO no. The hard outer shell is designed to be a reeeeally tight fit around the soft inside cover. As a current owner I wouldn't want to constantly take it off and put it back on for a car dock. Plus I think it would eventually wear on the buttons and dust covers.
emtee_skull said:
IMHO no. The hard outer shell is designed to be a reeeeally tight fit around the soft inside cover. As a current owner I wouldn't want to constantly take it off and put it back on for a car dock. Plus I think it would eventually wear on the buttons and dust covers.
Click to expand...
Click to collapse
Damn, thanks for the response. I guess I'll be running the sides of my phone naked with the Zagg shield on the front and back
I saw reviews on the Casemate but not the Otterbox Commuter and I was wondering by experience which of the two are better and why?
I never tried the Otterbox but I do have the active Seidio vase and Casemate Tough. The casemate is one solid case. Protection all around and it feels great.
Anyone else have any more thoughts? I was going to post the exact same question until I used the feature to search
joogle said:
Anyone else have any more thoughts?
Click to expand...
Click to collapse
I have the Case Mate "Barely There" and I must say it is exactly what I expected.
Good protection for the phone back, sides & lower part. The upper part (at the power button) is less protected as you can see HERE but for me it will do.
The design is perfect, it fits like a glove; all case openings for camera lens & volume buttons are at the good location, see HERE & HERE!
Also, the cover is very thin (but still plastic so still better protection than rubber) so the design of my precious Sensation isn't ruined by it.
Finally, I'd suggest to use an original HTC screenprotector together with this case. Your phone will last for years that way. I tried an external party screenprotector but that was a waste of money because of the worse fit.
Hope this helped you a bit, as you asked for Otterman comments
I have both of the cases mentioned and i like them both. They both do there job. My only gripes are that with the otter-box case i have to fully disassemble the case to use my desktop dock. I have always been a fan of otter-box and have used there cases since owning my Hd2 and will continue to be partial to them for that reason, just wished there were a kickstand on the commuter series for the sensation when you buy it.
Thanks for the feedback, how are the usb ports on the otterbox and does the flap close well?
Basically between the two you would prefer the otterbox more?
thanks again
snoop101 said:
I have both of the cases mentioned and i like them both. They both do there job. My only gripes are that with the otter-box case i have to fully disassemble the case to use my desktop dock. I have always been a fan of otter-box and have used there cases since owning my Hd2 and will continue to be partial to them for that reason, just wished there were a kickstand on the commuter series for the sensation when you buy it.
Click to expand...
Click to collapse
Case mate tough case is better, otterbox seemed like cap and the silicone surrounding the phone was just bad
Sent from my HTC Sensation using Tapatalk
with my experience with the HTC Sensation Pop! Case is was ok. The silicone warped a little bit on the sides but it was very durable. Be careful when taking the phone out of this case because the silicone popped off the hard part of the case on the top.
are you referring to the case mate or otterbox?
skylinejay88 said:
with my experience with the HTC Sensation Pop! Case is was ok. The silicone warped a little bit on the sides but it was very durable. Be careful when taking the phone out of this case because the silicone popped off the hard part of the case on the top.
Click to expand...
Click to collapse
joogle said:
Thanks for the feedback, how are the usb ports on the otterbox and does the flap close well?
Basically between the two you would prefer the otterbox more?
thanks again
Click to expand...
Click to collapse
the usb ports function well, the flap closes alright a little hard to open and close and i have used case for about four months and the silicone surround is starting to wear a bit but this is because i remove my phone frequently to use with my desktop cradle. I like the design of the otterbox more it is more ergonomic in my book. Here the way i look at it for the money casemate is a just as logical choice as the otterbox. I prefer the otterbox just becasue i like there product and had never used a casemate before. So in my opinion otterbox.
ballistic
try the ballistic case, its awesome, and its cheaper than otterbox, i bought mine off ebay, it has a silicone plus a hard plastic cover on top of it, its very cool
I've got the Casemate Tough on mine. Had it since December, and it's a great case.
Nice and grippy in the hand, but won't stick in your pocket like the silicon ones can.
The only gripes I can have with it are that it's a pain to disassemble to pull the battery or the SD card, and it could do with being in a few different colours.
I always like bright cases on my phones (yellow is a particular fave) because I do a lot of fishing, and it's always easier to see something bright yellow if you drop it or put it down in a hurry!
I'd say it's worth the money.
Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
galaxyhtc said:
Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
Click to expand...
Click to collapse
the otterbox's rubber on its case looked low grade compared to the seidios and case mates. it looked like what trident was using..
i was looking into the naztech but i didnt like how there is a bar on the top of the screen lol. id like to see a review on it. might get the case mate pop
If it helps your decision I had one otterbox which I had to have replaced thru otterbox due to silicone stretches and the phone will actually slide up and down in the case. had the replacement for about a month and just took off the second one today due to complaints of me sounding muffled and any back to the old dependable tpu case even though it is a ***** to get out my pocket and attracts lint it is my fave
Sent from my HTC Pyramid using xda premium
fireishott said:
If it helps your decision I had one otterbox which I had to have replaced thru otterbox due to silicone stretches and the phone will actually slide up and down in the case. had the replacement for about a month and just took off the second one today due to complaints of me sounding muffled and any back to the old dependable tpu case even though it is a ***** to get out my pocket and attracts lint it is my fave
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
yeah.. and if you watch the video reviews on it they didnt seem to pleased either lol. im dispointed in otterbox for this case.
Thanks for the info, i don't know though, was the otterbox easy to get in/out of your pocket.
galaxyhtc said:
Thanks for the info, i don't know though, was the otterbox easy to get in/out of your pocket.
Click to expand...
Click to collapse
Yeah it was super easy due to the hard plastic that covered the silicone layer that is one thin I miss about it and am still on the fence about putting it back on. I will say my phone survived a few high drops ( I am a cable tech and it fell from a ladder about 18 feet to concrete with out a scratch)
Sent From My HTC Sensation 4G powered by Sense-O-Matic
Wow, you just made my decision harder.... !!! Haha thanks though, i'm sure i can't go wrong with either of these cases, but I just want to know which is the best.
OK, I'm pretty sure that the Tough Case and Vertex are out:
Tough Case: I saw that the rubber wraps around the screen on the phone, and can attach lint, also, it does seem a bit bulky.
Vertex: Lack of information is difficult. From the pics I don't think it'll work out for me.
Personally I use zagg skins now. They are seriously epic. I have always hated all phone cases because of the bulk they add no matter how thin. But the zagg skins are tough...real tough. And add essentially no weight/thickness to the device. When I got mine i was trying to scratch the back and screen to no avail. zagg also offers a lifetime warranty, but I have no idea what their limits are on it. Plus you can customize it with any picture you want.
Just my opinion. Good luck with your choice.
I have both Case Mate POP and Otterbox Commuter... otterbox has far better plastic because it cant get scratched at all. The case mate pop looks like it's 10 years old after a week. Still I user POP rather than the otterbox because the rubber on otterbox is like a MAGNET for all the dirt that is around you. I used to clean the rubber, and put it in my pocket, and when I get it out it's entirely covered with dust... I don't even know what were they thinking when they were making it. Another thing about the otterbox is that the earphone jack cover never fits like it is supposed to.
I ordered this a week ago because it looks funny
http://www.case-mate.com/HTC-Sensat...-Sensation-Sensation-SE-Tut-Silicone-Case.asp
I will order the case mate tough also... I hope that will be what I want at last
Wow, thanks for the info! So which one of those has a thinner/less bulky form factor, and is easier to get in/out of your pocket?
Case
I bought a Yoobao case off of Ebay, I love it. It is very tough and thin holds the phone tight.
Ehh, thanks for the info, but I already have a TPU and while it is nice and slim, I want something with a little more protection.
I'll put my two cents in, I just got the vertex and I'm very impressed. I've had the commuter and didn't like it. The plastic seemed cheap to me and was too slick. I also had a tpu case that was ok but I didn't think it would protect very well and made the power difficult to press. The vertex is quality, looks and feels very nice and fits great.
Sent from my NookColor using xda premium
Hi, thanks for the input! Does the back material make it easy to get in & out of pockets easily? And also, is it thinner than your otterbox?
galaxyhtc said:
Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
Click to expand...
Click to collapse
Haven't tried the Case Mates yet, nor the Seidio, BUT:
Naztech is a POS - crappy build, plain & simple.
Otterbox's silicone is too damn loose - quoting others here.
Just saying......
Well, I've been on these forums reading for about 5 months now, but this is my first post...
I've had the Casemate Tough Case for the same amount of time I've had my Sensation; about 5 months.
The tough case's hard backing makes it very easy to slip in and out of your pocket. The only exposed rubber is a small section at the top and bottom of the phone and a very thin rim around the screen, the rest is the hard plastic. I never notice that it's collecting lint\dirt, except when I remove the case, there is a small rim of dust collected under the rubber rim, but you can't see it until the case is off.
The exposed rubber parts always look clean and smooth, same goes for the hard plastic outer shell.
The farthest I've dropped my phone with the case on is off the bar... so maybe 4 feet or so? No damage to the phone or the case.
I haven't tried out any other smartphone cases, so I don't have a large frame of reference, but I haven't had a single issue with the tough case. Hope this helps!
master1454 said:
Haven't tried the Case Mates yet, nor the Seidio, BUT:
Naztech is a POS - crappy build, plain & simple.
Otterbox's silicone is too damn loose - quoting others here.
Just saying......
Click to expand...
Click to collapse
Have you actually tried the naztech case? I'm sitting here right now literally starting at it trying to find a problem with something and I can't. I can't compare it with the tough case but its better than the otter.
Like I said before, and I don't know if this even matters, the naztech has cut outs for all the holes on the back cover, none of the other two piece cases have that feature.
As far as the plastic, the naztech has a rubberized back which makes it easier to hold than the otter but still slides into a my pocket easy.
i think you guys should check momax case....
For what it's worth...
I picked up one of these on Amazon:
http://www.amazon.com/gp/product/B0055DHCKS/ref=oh_o00_s00_i00_details
Inexpensive, fits very well, easy to slip on and off, isn't a lint magnet, reminds me of the great Boxwave slip cover I had on my Nexus One.
Highly recommended.
Hi - was wondering if any one here could shed some feedback on their experience, etc., as to which case to get among these two as I think I've narrowed it down to these two.
I've bought one of those $5.95 Amazon cases which is alright, do I gain anything by buying either one of these.
Thanks
wow 5.95 can you share where to buy it a link please for 5.95
http://www.amazon.com/HTC-SENSATION...UR4W/ref=sr_1_2?ie=UTF8&qid=1327442969&sr=8-2
leoiden said:
wow 5.95 can you share where to buy it a link please for 5.95
Click to expand...
Click to collapse
I also own this case and I will say that unless you want a little bit of extra drop protection then you have nothing to gain. The button design and cutouts on this case are perfect. The case is not bulky and gives the phone some traction so it doesn't feel like it's going to slip out of your hands.
joogle said:
Hi - was wondering if any one here could shed some feedback on their experience, etc., as to which case to get among these two as I think I've narrowed it down to these two.
I've bought one of those $5.95 Amazon cases which is alright, do I gain anything by buying either one of these.
Thanks
Click to expand...
Click to collapse
If you are looking for the best case with the best look, protection, feel and all that, check out the case mate pop. Its a tight fit so taking the phone in and out take some practice. It gets easier with time though. I have the white one.
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Sent from my NexusHD2 using xda premium
waiting for otterbox to come up with a defender case. although might be difficult with the shape of the screen
The Tough is awesome. Good protection, good grip and the fit is nice. Just don't expect it to be pretty. If anything, it reminds me of a tire because of the hard shell's texture lol.
Haven't seen the Otterbox in person, so can't comment on that.
I have the otterbox and the case mate and they are both nice but I prefer the case mate because of the textured back which adds TONS of grip to the back opposed the the slick plastic on the otterbox.
They look the same
Sent from my HTC Sensation Z710e using xda premium
CASE MATE is my favorite I have 5 cases but the Case Mate Tough Case never leaves my phone(unless i am swapping battery or memory card ). Also i have had quite a few (high) drops and it is still running perfect.
what i like about the otter over the case mate is that the ports are all coverd in the otterbox
waiting for otterbox to come up with a defender case
Me too but I don't think it will come out
Sent from my HTC Sensation Z710e using xda premium
I purchased the body glove when i bought the phone, let me say worst 20 dollars i spent ever. The thing broke from the hinge in my pocket. Either one of these to options is better then the BG
Along with amazon, I find ebay to be even cheaper.
Saw and felt the Otterbox Commuter for me its a good case. It has good all over protection of the phone, However the back side of the otterbox is kinda sleeky than the back cover of the sensation.
I personally have the the Otterbox Commuter case for the HTC Sensation, so I cannot comment on the Casemate. I like the Otterbox for the design to protect the phone between the impact case and gel case together for protection, plus the headphone and USB port covers. The hard plastic impact case is not the best for grip, and the gel part of the case is a major magnet for lint from your pocket.
Hope that helps!
Edit: OK, missed something myself. Wanted a charging dock that supports a case, so I bought one. But it won't work very well if there is a USB port cover, so just something extra to consider!
Does anyone know if they updated the Case-mate tough case design, where originally they had the mic above the camera lens covered? I could have sworn I saw a thread where Case-mate said they were going to update their case and just uncover for that one hole. Just curious if anyone has bought it lately and knows.
I got mine in January I think and it still has that hole covered up. Is that hole supposed to be the noise cancellation mic? I'd have to ask my wife if my call quality has gotten worse since getting this case, but knowing her she wouldn't notice anyway lol.
If anything, it's probably not hard to just drill a tiny hole into the casing.
I have the otterbox commutor, and its sad to say. It is the first Otterbox ive owned that im disappointed in. Due to the top and bottom being rounded. After alot of use in your pocket the rubber on top and bottom loosens and sags. I bought the Otterbox the day it came out and overnighted it. I have yet to find a decent replacement.
In no way would i bash Otterbox on this one product. I have owned other cases for Iphone 3gs, Mytouch 4g and Nook Color. ALL cases were some of the best i have seen. Quality if usually above the rest. I think it is the design due to the large about of exposed rubber on top and bottom.
http://www.amazon.com/Seidio-HLSSGNLASC-Surface-Holster-Samsung/dp/B006H4DE8S/ref=sr_1_7?s=wireless&ie=UTF8&qid=1353010277&sr=1-7&keywords=seidio+spring+clip+nexus
Perfect fit for our naked Nexus 4, as I'm rocking one right now.
Interesting -- the N4 is just enough bigger than the GNex to fill up the room that would be occupied by the Surface case, eh? If I hadn't already bought a belt holster, I might well have been interested; I had a Seidio belt clip for my N1 and liked it a lot.. Can you post a photo or two of the phone in the holster? Let us know how it does, i.e., if you have any accidents where the phone springs out accidentally or the like.
wmm said:
Interesting -- the N4 is just enough bigger than the GNex to fill up the room that would be occupied by the Surface case, eh? If I hadn't already bought a belt holster, I might well have been interested; I had a Seidio belt clip for my N1 and liked it a lot.. Can you post a photo or two of the phone in the holster? Let us know how it does, i.e., if you have any accidents where the phone springs out accidentally or the like.
Click to expand...
Click to collapse
I will try to put up some pics tonight..... it honestly fits like a glove inside.... its not going anywhere once inside.
This is great, although by the time my N4 arrives my chinese s cases chould be here. I hope more people report what non N$ cases fit though.
This could be a good option...
galaxys said:
This could be a good option...
Click to expand...
Click to collapse
for those interested, I just received this case in hopes of using it with the nexus4 like the op claims...
it does NOT fit. the holster is much too large for the naked phone
You're right, I really screwed up. I'm terribly sorry.
I have a lot of holsters, and must have confused myself.
I just checked, and it looks like the HTC Sensation Seidio Holster fits the Nexus 4 perfectly, but the Sensation Surface Holster, not the naked.
Really sorry, and hope you can resolve this. Feel terrible.
Zivman3 said:
for those interested, I just received this case in hopes of using it with the nexus4 like the op claims...
it does NOT fit. the holster is much too large for the naked phone
Click to expand...
Click to collapse
Tested with my Active holster for my HTC Sensation and works well with it naked. But not to be a buzzkill, but I do not want my N4 naked in the holster. I have dropped my sensation from this very holster with cases on. I am going to get the Galaxy Nexus Surface holster to see if it fits with a tpu case on or not.
caliber177 said:
http://www.amazon.com/Seidio-HLSSGNLASC-Surface-Holster-Samsung/dp/B006H4DE8S/ref=sr_1_7?s=wireless&ie=UTF8&qid=1353010277&sr=1-7&keywords=seidio+spring+clip+nexus
Perfect fit for our naked Nexus 4, as I'm rocking one right now.
Click to expand...
Click to collapse
I can't believe they want $19 for it, I bought one for my Rezound and it was $4.
Zivman3 said:
for those interested, I just received this case in hopes of using it with the nexus4 like the op claims...
it does NOT fit. the holster is much too large for the naked phone
Click to expand...
Click to collapse
I am getting the Surface holster for the gnex-at the office waiting for me tomorrow am. Anyone know if it'll fit with a tpu case on yet?
Seidio has Surface and Active cases with kickstands that are in development right now in addition to a holster that will work with them both. They don't come cheap though. I have used their products on a number of my phones and I have to say that they are worth every penny. Very protective, the fit is awesome and they even make charging stations that work with the cases on. I reckon by the time I actually get my phone, the Seidio cases will be available.
I'm using my seido active holster (90% sure it is the active holster, the one with a rubber and hard plastic parts for the phone) with my N4 with a tpu case on it and the holster fits almost perfect.
slydog43 said:
I'm using my seido active holster (90% sure it is the active holster, the one with a rubber and hard plastic parts for the phone) with my N4 with a tpu case on it and the holster fits almost perfect.
Click to expand...
Click to collapse
Pics?
I have the Seidio Surface one for the Gnex and it doesn't fit with a tpu case on. It's a little loose with the N4 naked, but that's a no go for me.
Just an update. I am getting the Diztronic Ultra Thin One Piece Hard Shell case as well to see if it will fit the Surface holster. Will report back next week or whenever I get it in.
Here is the linkage to the 'thinner' case. Keep in mind it doesn't cover the bottom or top of the phone. Alas the some of the "thinner" aspects of the case. Remember to use XDA for a promo coupon code if you haven't done so yet. The code can only be used once,and I already used it on my other TPU lol.
http://tpu-cases.com/index.php?main_page=product_info&cPath=46_76&products_id=306
I think I'll be picking up one of the Seidio Surface/Holster combos when they're released. The Nexus 4 is an awesome looking phone, but the back is so slick it ends up sliding away on it's own. This also seems to be one of the only ways to get a good holster for the phone.
http://www.seidioonline.com/lg-nexus-4-surface-metal-kickstand-case-holster-p/bd2-hr3lgn4k-bk.htm