Related
hey Guyz. I have a Tilt that a customer gave me that got bricked while trying to flash one of dutty's roms...Problem is that the genius didn't load up Hard SPL even tho he told me that he did...now He wants me to fix it...even tho he didn't follow my instructions and read the WiKi...I kno that on the Hermes it was able to be unbricked. Is the same for the Kaiser possible? I would greatly appreciate your help as my customers are loving the work you guyz do here in nyc..
Thanks in Advance!
Cristian
What is the current status of the phone?
Can you get into the bootloader at all?
If you can get to the bootloader you should be able to load the AT&T AKU v0.4.4 ROM (the unoffical upgraded AT&T ROM). Once you get that loaded you should flash HardSPL immediately.
Let me know how it goes...
Cheers.
I bricked my tilt when it was less than 24 hours old... I recovered it with a BETA of the ATT rom and THEN redoing the hardspl thingy - worked a treat.
Do a search for tolt bricked and you should find afew threads for it.
The rom is called something like RUU_Kaiser_ATT_WWE....._Internal.exe
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
HTCFAN0923 said:
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
Click to expand...
Click to collapse
If you are at the bootloader screen (Tri-Color) then the phone is not bricked. In the sticky at the top on how to revert back for warranty replacement, it has links for the various roms. Just flash an official AT&T rom on it and you should be good to go. Then do the HardSPL.
Cool that you work for AT&T and hang out here! If you have any other warranty returns, I can give you my address as I wouldn't mind having a backup or two...
BTW: The AT&T ROM for the Tilt is actually quite good in the big picture of things. At least the phone is usable (slower than it should be and less memory than it should have, but its still very usable and stable on the official rom). If you want to ***** about official roms, go back to the 8125 and its official rom. The while the device (at the time) was great, that rom made the phone almost worthless (super slow, battery problems, bad radio, dropped calls, freezing, etc). I can't tell you how many people that run custom roms on the Wizard just can't believe what that phone is actually capable of.
Ok, sorry, got off topic there...
does Hard-SPL needs to be flashed just once on a device or does it need to be installed every tome a new ROM is going to be Flashed onto it?
mfrazzz said:
If you are at the bootloader screen (Tri-Color) then the phone is not bricked. In the sticky at the top on how to revert back for warranty replacement, it has links for the various roms. Just flash an official AT&T rom on it and you should be good to go. Then do the HardSPL.
Cool that you work for AT&T and hang out here! If you have any other warranty returns, I can give you my address as I wouldn't mind having a backup or two...
Click to expand...
Click to collapse
For some reason, it's not being recognized by my Activesync. I got it to recognize it but now it sayz Error 294: Invalid Vendor ID...I'm using the RUU_Cingular_WWE Rom for the Kaiser...so I'm flabbergasted at this point...
Quick Silver said:
does Hard-SPL needs to be flashed just once on a device or does it need to be installed every tome a new ROM is going to be Flashed onto it?
Click to expand...
Click to collapse
Only once! Than you can flash as much as you like!
HTCFAN0923 said:
For some reason, it's not being recognized by my Activesync. I got it to recognize it but now it sayz Error 294: Invalid Vendor ID...I'm using the RUU_Cingular_WWE Rom for the Kaiser...so I'm flabbergasted at this point...
Click to expand...
Click to collapse
ActiveSync will not recognize your device when in BootLoader mode!
The Vendor ID error means the ROM cannot be loaded on the Tilt without HardSPL. You need an original Tilt ROM. (That's what I think about this)
HTCFAN0923 said:
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
Click to expand...
Click to collapse
Oddly enough the "Original" Tilt ROM will not install on a Tilt that does not already have HardSPL on it (to spell it out for you, the CID of the ROM does not match the Tilt's stock SPL). If you check the "reverting back" sticky you'll find all this info already, though it is deep in the thread.
The AKU v.0.4.4 ATT Beta ROM does have the correct CID and will flash on a stock Tilt. SO that is what you are forced to resort to at this point. Once you get the beta ROM installed you can (and probably should) install HardSPL.
After all that, if you decide you want to return or warranty the phone follow the "revert" thread to restore it to "stock" form.
Some additional notes on your problem...
ActiveSync will not connect in Bootloader mode (this is expected). You should see a device show up in Device Manager however, I can't recall the exact description however.
quick flash procedure:
put phone in bootloader
connect usb cable
install ROM
FYI, the problem may not be a bricked tilt... you could try Pof's fix which involves using MTTY.exe to boot the phone, depending on how your "customer" tried to flash it it may just need a kick in the pants to restore it. (search Pof's SSPL for the Kaiser thread for instructions, the thread was closed so you will have to look deep).
<climbing on my soapbox>
Lastly... your use of the word "customer" concerns me... are you charging people for the work you do to their phones? If so, do you donate to the people who make it possible? I'm probably just misunderstanding you, but if you're profiting from others work, perhaps you should contribute (especially if you're coming here to ask for help).
</climbing down>
Good Luck!
Cheers.
Customers as in I work for an AT&T corporate owned Retail location and they have bought Tilts from me. They kno my Tilt has been modded and they usually want to do the same. I don't charge them for doing mods to their Tilts. This still remains a community where we help each other and I cherish that. Greed has no place here.
as far as ur suggestions...It looks like I'm gonna be drunk @ 4am on XDA tonite...lol...
HTCFAN0923 said:
Customers as in I work for an AT&T corporate owned Retail location and they have bought Tilts from me. They kno my Tilt has been modded and they usually want to do the same. I don't charge them for doing mods to their Tilts. This still remains a community where we help each other and I cherish that. Greed has no place here.
Click to expand...
Click to collapse
That's cool... my misunderstanding then. Hopefully no hard feelings .
All in all it sounds like the guy wants a custom ROM so you should probably get the ATT Beta ROM and install that. And then install HardSPL.
Check Kyphur's second post in the thread below for the ROM you want.
http://forum.xda-developers.com/showthread.php?t=343198
Thanks for the info sycho...I'll get to it after work..
Good news! The AKU 0.33 worked! Thanks for ur help sycho!
how can i re-install the window? at tilt 8925
i have wm6.1
i want to reset it so the error message shud gone like Recover ?
@kaal,
It seems what you want to do is a HARD RESET. Please visit Kaiser Wiki and read through. You'll know your phone better that way.
@HTCFan & Sirsycho, Glad you both sort it out in the community spirit Cheers!
sirsycho said:
Oddly enough the "Original" Tilt ROM will not install on a Tilt that does not already have HardSPL on it (to spell it out for you, the CID of the ROM does not match the Tilt's stock SPL). If you check the "reverting back" sticky you'll find all this info already, though it is deep in the thread.
The AKU v.0.4.4 ATT Beta ROM does have the correct CID and will flash on a stock Tilt. SO that is what you are forced to resort to at this point. Once you get the beta ROM installed you can (and probably should) install HardSPL.
After all that, if you decide you want to return or warranty the phone follow the "revert" thread to restore it to "stock" form.
Some additional notes on your problem...
ActiveSync will not connect in Bootloader mode (this is expected). You should see a device show up in Device Manager however, I can't recall the exact description however.
quick flash procedure:
put phone in bootloader
connect usb cable
install ROM
FYI, the problem may not be a bricked tilt... you could try Pof's fix which involves using MTTY.exe to boot the phone, depending on how your "customer" tried to flash it it may just need a kick in the pants to restore it. (search Pof's SSPL for the Kaiser thread for instructions, the thread was closed so you will have to look deep).
<climbing on my soapbox>
Lastly... your use of the word "customer" concerns me... are you charging people for the work you do to their phones? If so, do you donate to the people who make it possible? I'm probably just misunderstanding you, but if you're profiting from others work, perhaps you should contribute (especially if you're coming here to ask for help).
</climbing down>
Good Luck!
Cheers.
Click to expand...
Click to collapse
Because of you folks and this thread, I have a working device as opposed to a paperweight...Thanks!!!
I was trying to follow the many different ways to unlock, Hard SPL, and flash a new ROM but this is just way over my head. I think I may have screwed up my phone. I've been reading for 4 hours and I'm just throughly confused (this was so much easier on th Artemis!). I downloaded the jumpSPL1.56-KAS, ran it from the phone (not the storage card). Then I ran Kaiser-HardSPL-3.56 and that seemed to work fine. Then I tried to run step 1 of the KaiserUnlocker and now it will only show me the AT&T boot screen and nothing else after that. What did I do wrong?
I'm trying to unlock the phone so I can use it on T-Mobile USA and flash a new ROM. I've flashed ROMS before but I just never realized how involved this process was on other devices.
And yes, I can get to the boot loader screen.
shawndh said:
I was trying to follow the many different ways to unlock, Hard SPL, and flash a new ROM but this is just way over my head. I think I may have screwed up my phone. I've been reading for 4 hours and I'm just throughly confused (this was so much easier on th Artemis!). I downloaded the jumpSPL1.56-KAS, ran it from the phone (not the storage card). Then I ran Kaiser-HardSPL-3.56 and that seemed to work fine. Then I tried to run step 1 of the KaiserUnlocker and now it will only show me the AT&T boot screen and nothing else after that. What did I do wrong?
I'm trying to unlock the phone so I can use it on T-Mobile USA and flash a new ROM. I've flashed ROMS before but I just never realized how involved this process was on other devices.
And yes, I can get to the boot loader screen.
Click to expand...
Click to collapse
Ick...this sounds like one of a couple of things...either you really screwed it up (btw, even "really screwed up" has been known to be fixable thanks to the super awesome folks here on XDA Devs) or it's a simple fix. My first suggestion would be to put it back into bootloader (just hold the usualy bootloader buttons and stick the stylus up in the Reset hole OR take the batter out and put it back in, your choice I think) and try rerunning everything EXCEPT the KasierUnlocker (btw, dont quote me but I would almost swear KaiserUnlocker needed a special radio flashed in order to properly work...you may wanna head back to that thread and check it out. I unlocked mine with it and I can about guarantee I had a special radio...) and see if it fixes anything OR find a compatible radio and reflash it (well, first off...get it into bootloader and tell us what the bootloader says on it)
Anyways, first things first would be to see what the bootloader is showing and then work from there. Sounds like a little bug so don't freak out too bad. If you think flashing these babies are hard then you really didnt try flashing G4 versions of the Wizard =P I totally bricked one because it was the pesky G4s and I didn't realize it at the time (complete newbness lol) So yeah, Kaiser's are a LOVELY change for me =] I've flashed mine countless times and loved it since the moment I got it! =D
But yeah, gimme info! =]
Did you use WM6.1 or WM6.0 to unlock the phone? Put in boot loader and flash orginal WM6.0 ROM as the other user suggested. You should be able to flash it if it is not a brick.
If it doesn't work you can use mtty to recover your phone, the needed information you'll find in the Kaiser Wiki.
Hope it helps
I just had this exact problem.
Use the EXE included in the tutorial to flash any windows 6.1 ROM from the bootloader via USB, and you will boot again.
HTCOmega said:
Ick...this sounds like one of a couple of things...either you really screwed it up (btw, even "really screwed up" has been known to be fixable thanks to the super awesome folks here on XDA Devs) or it's a simple fix. My first suggestion would be to put it back into bootloader (just hold the usualy bootloader buttons and stick the stylus up in the Reset hole OR take the batter out and put it back in, your choice I think) and try rerunning everything EXCEPT the KasierUnlocker (btw, dont quote me but I would almost swear KaiserUnlocker needed a special radio flashed in order to properly work...you may wanna head back to that thread and check it out. I unlocked mine with it and I can about guarantee I had a special radio...) and see if it fixes anything OR find a compatible radio and reflash it (well, first off...get it into bootloader and tell us what the bootloader says on it)
Anyways, first things first would be to see what the bootloader is showing and then work from there. Sounds like a little bug so don't freak out too bad. If you think flashing these babies are hard then you really didnt try flashing G4 versions of the Wizard =P I totally bricked one because it was the pesky G4s and I didn't realize it at the time (complete newbness lol) So yeah, Kaiser's are a LOVELY change for me =] I've flashed mine countless times and loved it since the moment I got it! =D
But yeah, gimme info! =]
Click to expand...
Click to collapse
I know. The crazy thing is that I've successfully flashed a G3 and a G4 Wizard and I still find this confusing.
When I go to the boot loader screen I have:
KAIS1*0
SPL-3.56.Hard
CPLD-8
When I reset the device normally I get:
R 1.27.12.11
G 22.45.88.07H
D 1.62.00.00
I didn't try to flash any other ROMS to unlock it. I just went with the hard SPL and then tried the Unlock tool. The phone is stock.
Thanx for the replys. I reflashed the original ROM and now it's working again. This is what I have now:
When I go to the boot loader screen I have:
KAIS1*0
SPL-3.56.Hard
CPLD-8
Now when I reset the device normally I get:
ROM version 1.62.502.0
Radio version 1.27.14.09
Protocal version is 22.45.88.07H
Device info:
Windows Mobil 6
CE OS 5.2.1622 (Build 18128.0.4.4)
Can I go strait to a SIM unlocker and then flash a new ROM?
Well you've got HardSPL 3.56 flashed to it.
Why do you need to sim unlock it? Sim unlocking is not neccesary to flash one of the many Roms avaliable for the Kaiser/Tilt.
Once it's got HardSPL flashed, you're free to flash any type of rom onto it
shawndh said:
I was trying to follow the many different ways to unlock, Hard SPL, and flash a new ROM but this is just way over my head. I think I may have screwed up my phone. I've been reading for 4 hours and I'm just throughly confused (this was so much easier on th Artemis!). I downloaded the jumpSPL1.56-KAS, ran it from the phone (not the storage card). Then I ran Kaiser-HardSPL-3.56 and that seemed to work fine. Then I tried to run step 1 of the KaiserUnlocker and now it will only show me the AT&T boot screen and nothing else after that. What did I do wrong?
I'm trying to unlock the phone so I can use it on T-Mobile USA and flash a new ROM. I've flashed ROMS before but I just never realized how involved this process was on other devices.
And yes, I can get to the boot loader screen.
Click to expand...
Click to collapse
A couple of things:
1) The Kaiser-Unlocker only works on 1.xx hardspl's, so you'll have to put one of those on first.
2) You do need to install the patched radio before you run it.
3) You'll need to flash a compatible radio afterward too, or else your device might not boot all the way.
4) Next time please post these questions in the thread for the unlocker you are using. It makes it much simpler for everyone.
stuff said:
Well you've got HardSPL 3.56 flashed to it.
Why do you need to sim unlock it? Sim unlocking is not neccesary to flash one of the many Roms avaliable for the Kaiser/Tilt.
Once it's got HardSPL flashed, you're free to flash any type of rom onto it
Click to expand...
Click to collapse
But HardSPL 3.56 doesn't SIM unlock the phone from what I understand. I need to use it with T-Mobile SIM. So I need to chenge to a 1.XX Hard SPL to do this?
So I guess I went wrong with flashing 3.56 first and not 1.1
Then I need to patch the radio
Run the unlocker
rinstall the radio
Then flash the ROM
Problem I have now is that I can't seem to go back down to a lower SPL version.
shawndh said:
But HardSPL 3.56 doesn't SIM unlock the phone from what I understand. I need to use it with T-Mobile SIM. So I need to chenge to a 1.XX Hard SPL to do this?
Click to expand...
Click to collapse
You need to read the instructions carefully, and ask questions in that thread. All the experts in unlocking will be there to help you.
First of all please be gentle! I am a complete novice and this is my first post. I have a Touch Pro on a Vodafone contract. I downloaded the recent ROM software upgrade from the Vodafone web site and began the transfer to my phone having followed all the advice. However, the download got stuck at 12% and no matter how many times I start over again it will not go past that point. Worst still the phone is now locked on a red/green/blue/white screen with the message "Upgrade ROM code error Please try again". the error message on the Vodafone software download is No 302. I have tried Vodafone technical help but as I was due for a new phone anyway they have sent me a Touch Pro 2 but don't seem to want to help me resolving the problem with my "old" phone. It is only 5 months old (replacement insurance phone) and in good condition but useless if it can't be made to work.
Can anyone help with simple instructions on how to download a ROM that will work. If not does anyone want to make me an offer for the phone? Currently locked on Vodafone but I am sure you guys out there have the skill to resolve that one.
Many thanks,
Hollybeau
So, they aren't asking you to send it back, I take it? If that's the case, then the first thing I would try would be to flash with the stock rom, if you can find it (not the upgrade that quit on you). If that doesn't work, then just try to flash hard spl. If hard spl goes through ok, you're golden and can flash any raphael rom you want. If it doesn't, the phone is probably toast. You got a new one, so just use the old one as artwork.
Thanks Farmer Ted,
Unfortunately I do not know the orginal stock ROM. It is not on the Vodafone web site and the HTC site keeps telling me that all the likely candidates are "not suitable" ( I assume this is beacuse it is some sort of Vodafone variant). I am afraid that "flash hardspl" means nothing to me - I told you I was a novice! Can you direct me to what and where please.
What bugs me is that here is a phone worth £200? but for a problem caused by Vodafone's buggy software upgrade.
Hollybeau
Start Here.
Best way to find everything you want to know about flashing ROMs.
Lol.
Hard SPL is a bootloader that allows you to flash any rom you want (not just vodaphone). It also has over-write protection, so if you get into the situation you're currently in, the phone won't be bricked. If you can flash it (make sure you flash the gsm version in the raph rom forum), you are fine and dandy.
If you can't find the stock rom online, you may be able to flash the upgraded rom off of your sd card (I believe this will work with a stock rom and stock spl, but am not 100% sure). Re-name the .nbh image file to RAPHIMG.nbh. Format your sd card (1-2 gb works best) to FAT32, and put the image on the root of the card. Go into bootloader (well, you're already there, you may not need to) by holding volume down and soft resetting. Hold vol. down until the tri-color screen appears. At the prompt, press the power button, and let the flash run its course. Soft reset when it says that the update was a success. Let the phone boot up until it gets to the the alignment screen, the hard reset and boot it up.
If you don't have an .nbh file, and instead have a .exe file from vodaphone/htc, then you should be able to extract the contents with either winrar or 7-zip (google) to get at the .nbh image file. I've done this before, and it works fine.
Many thanks to all who have replied. I have fixed the problem. It turns out that it was the download to my PC that was at fault. I downloaded the Vodafone software to my lap top and ran it from there and it has recovered the phone. I now have a spare, and working, Touch Pro. I may try the HardSPL and other ROMS just to use the phone as a test bed. Alternatively, anyone out there want to make me an offer?
Hollybeau
Hollybeau said:
Alternatively, anyone out there want to make me an offer?
Click to expand...
Click to collapse
Ask in market place and you will probably get some takers
Ok...so my tp2 is verizon and I did the whole hardspl thing and somehow got the energyrom leo on my fone, and then wen i tried to update to the new sense 2.1 extreme rom, i dont know wat happened. It said to use this custom ruu thing which i clicked on, and wen it updated my fone, my fone does absolutely nothing now cept loading the start screen where it says Touch pro2
I new something was wrong becus at no point was the .nbh that i extracted used, but no ruu came with the file that i downloaded...sighhh so is my fone dead or wat? I tried hard resetting, and although i am able to get to the hard reset page, wen i actually do it, it still just freezes where touch pro2 screen comes out
dont trip
i've 'bricked' most of my phones i've played with at least once. If your getting anything your ok - go to boot loader mode, reflash the original rom on it, then the one you want. Make sure your battery has a good charge also ^^
starscalling said:
dont trip
i've 'bricked' most of my phones i've played with at least once. If your getting anything your ok - go to boot loader mode, reflash the original rom on it, then the one you want. Make sure your battery has a good charge also ^^
Click to expand...
Click to collapse
ok so im uploading this rom rite now http://forum.ppcgeeks.com/showthread.php?t=91940..the verizon one, once i get that do i have to do the hardspl thing again? btw thanks so much for the bootloader thing, i didnt know how to do it, i kept doing the hard reset..lol
* i got the stock rom back, thanks alot...do i need to hardpl it again? could sum1 help me flash to the another rom as well, i just dont know wat to do wit the nbh
fjgotgame24 said:
ok so im uploading this rom rite now http://forum.ppcgeeks.com/showthread.php?t=91940..the verizon one, once i get that do i have to do the hardspl thing again? btw thanks so much for the bootloader thing, i didnt know how to do it, i kept doing the hard reset..lol
* i got the stock rom back, thanks alot...do i need to hardpl it again? could sum1 help me flash to the another rom as well, i just dont know wat to do wit the nbh
Click to expand...
Click to collapse
it wouldnt hurt. Just pretend youve never done anything to the phone.
Write or type out a list of steps for each phase
print it out and cross them off one by one.
thanks
Thanks my TP2 now is working
orobas said:
Thanks my TP2 now is working
Click to expand...
Click to collapse
sweet
just had the black screen of death - lol was like - THE THREAD OF DEATH CURSED ME :> [all good now of course]
Failed flashing with CustomRUU.exe
Every flash has failed (freezes at "Touch Pro2" boot screen) when I tried to use a ROM that uses CustomRUU.exe (Miri, Cell_Pro, Athine, AF, Shadowline, and others). Flashing ROMs that use ROMUpdateUtility.exe already extracted flash fine. I've even tried first flash the original Sprint stock ROM and then flashing a "CustomRUU" ROM but without success. I've also extracted the files from the CustomRUU.exe and then run it with the nbh file but that doesn't work either. HTC Touch Pro2 (Sprint)
Any suggestions?
-Scott
scottGx said:
Every flash has failed (freezes at "Touch Pro2" boot screen) when I tried to use a ROM that uses CustomRUU.exe (Miri, Cell_Pro, Athine, AF, Shadowline, and others). Flashing ROMs that use ROMUpdateUtility.exe already extracted flash fine. I've even tried first flash the original Sprint stock ROM and then flashing a "CustomRUU" ROM but without success. I've also extracted the files from the CustomRUU.exe and then run it with the nbh file but that doesn't work either. HTC Touch Pro2 (Sprint)
Any suggestions?
-Scott
Click to expand...
Click to collapse
You're flashing CDMA ROMs, right? Not the GSM only ones found here, but CDMA ones from elsewhere, like here? Try flashing one of the CDMA ROMs found at the second link, and see if that works, because I think you may be flashing GSM ROMs onto your CDMA device, which would explain why it flashes, but doesn't boot properly. Hope that helps
DaveTheTytnIIGuy said:
You're flashing CDMA ROMs, right? Not the GSM only ones found here, but CDMA ones from elsewhere, like here? Try flashing one of the CDMA ROMs found at the second link, and see if that works, because I think you may be flashing GSM ROMs onto your CDMA device, which would explain why it flashes, but doesn't boot properly. Hope that helps
Click to expand...
Click to collapse
Apparently, I was flashing a GSM ROM. There really should be better indication of what the ROM is designed for than simply being in a particular form. It wouldn't be any trouble to add a few characters (GSM/CDMA) to the file name to make it clear.
Thanks!
My Verizon tp2 is stuck on the TOUCH pro2 screen when it tries to boot.. It will not hard or soft reset. So it's not being recognized by my pc to do the hardspl thing. I was trying to flash the perfectblack rom but it said it was not for my device...so i tried Energy rom.. it flashed but will not boot.. please help...how do i fix this.
Well...I took it back to Verizon...they are sending me another one. Have to figure out what I did wrong because I truly wanted to try a cooked rom or two.
Back to the drawing board.
defiantone said:
Well...I took it back to Verizon...they are sending me another one. Have to figure out what I did wrong because I truly wanted to try a cooked rom or two.
Back to the drawing board.
Click to expand...
Click to collapse
Wait, you are sending Verizon your phone with a non-booting cooked ROM and the HSPL on it?!?
If they figure that out, there's a good chance you'll be SOL.
dwizzy130
dwizzy130 said:
Wait, you are sending Verizon your phone with a non-booting cooked ROM and the HSPL on it?!?
If they figure that out, there's a good chance you'll be SOL.
dwizzy130
Click to expand...
Click to collapse
Exactly. Even if you have insurance on the TP2, if you sent it back with anything that is not stock, your insurance is probably voided, they probably wont give you your phone back, and you might even have to pay full price for a new one. Good luck man. Definitely should have held out for some responses before you sent it out. If you haven't then that's good, but if you did, your probably out of luck.
defiantone said:
Well...I took it back to Verizon...they are sending me another one. Have to figure out what I did wrong because I truly wanted to try a cooked rom or two.
Back to the drawing board.
Click to expand...
Click to collapse
Why didn't you try what the orginal poster did?
I loaded a GSM rom on my Sprint TP2, I wasn't paying attention to the orginal
Post and just thought oh.. I want this rom..
What I did,
Turn on the device while holding down the Power button and the Volume Down key. If you see Serial and 3-4 colored bars plug in your USB, and reflash with a CDMA Rom.
This fixed my Phone. Credits to the gurus at PPC Geeks. if i find the topic later I'll post it.
*edit: nevermind
*edit: problem resolved
Ive just installed a generic HTC rom over the top of the T-mobile rom pre-installed on the device.
I will check whether the things that everyone is reporting to be missing from the t-mobile rom are now working
UPDATE:
This rom does not seem to add any major features, it pretty much the same but without all the t-mobile branding
**NEW URL**
http://androidfiledepot.com/Storage...io_32.30.00.28U_4.05.00.11_release_121865.exe
so you have root acces?! or can you load an htc rom but no other roms?
where is this generic rom
OK, i take no responsibility if you brick your new phone if you do this
This update will remove all t-mobile branding from your handset. Should you have problems with your handset you will need to find a t-mobile rom to reinstall onto the device before returning to t-mobile for repair.
You will need a Goldcard and the following rom http://androidfiledepot.com/Storage...io_32.30.00.28U_4.05.00.11_release_121865.exe
Once you have created a goldcard insert it into your phone and start it up, then run the exe file listed above.
This will install the HTC rom onto your device and will remove all the t-mobile branding (apart from the sim lock)
Ive only spent about 10 mins testing the device since the update but everything seems fine.
If anyone is:
1. Concerned about the current lack of a t-mobile rom to undo changes this rom would make
2. is unsure of how to install the rom
3. Doesnt see the point of installing this rom
I would recomend that you simply DONT install this rom
PS...For those of you who want the 3d Gallery from the Nexus1 on your Desire you can simply install the 3dGallery.apk in the normal way
Just interested but is this rom newer than the one we are using at the moment, also, I created a Goldcard for my hero a few months back is it the same thing for this, or do you have access to a guide, also doesn't a goldcard technically allow us to install custom roms onto the desire.
What crap have T-mobile installed? =/
I can't see much T-Mobile on mine just when it boots up it says T-Mobile but apart from that the rest of the stuff is sense ui things.
nintendolinky said:
Just interested but is this rom newer than the one we are using at the moment, also, I created a Goldcard for my hero a few months back is it the same thing for this, or do you have access to a guide, also doesn't a goldcard technically allow us to install custom roms onto the desire.
Click to expand...
Click to collapse
The one linked to in my post does indeed appear to be newer, ive noticed a virgin media icon which was easily removed. It seems that although it is listed as a stock ROM its not a fully stock htc ROM after all.
All T-mobile branding is gone obviously.
I just used an old Goldcard that was created for either my Hero or Dream
Jabbypants said:
I can't see much T-Mobile on mine just when it boots up it says T-Mobile but apart from that the rest of the stuff is sense ui things.
Click to expand...
Click to collapse
Sorry My bad, I was meaning all the logos and changed icons and all the changes within senseUI.
Hardly anything T-Mobile on it... Not sure what the benefit of flashing is tbh...
I won't be flashing the ROM, not until there is a clear benefit to actually doing it..
I still don't think there is any T-mobile stuff on it, if it was branded with there crap it would come in a T-Mobile box, as far as i can see its the Desire that i have seen on the net.
The changes in sense is down to htc same with everything else, all these phones are is sim locked imo.
These are the 2 differences I've noticed so far:
T-Mobile Bootup Animation
Browser icon has WNW over it (web n walk)
brummiesteven said:
These are the 2 differences I've noticed so far:
T-Mobile Bootup Animation
Browser icon has WNW over it (web n walk)
Click to expand...
Click to collapse
Yerp - and a new ROM won't remove the T-Mobile boot up screen..
So i think anyone flashing a new ROM is slightly insane - just to remove a w'n'w icon... As it really is very very small.
Nowt else on there T-Mobile wise
thedalmeny said:
Yerp - and a new ROM won't remove the T-Mobile boot up screen..
So i think anyone flashing a new ROM is slightly insane - just to remove a w'n'w icon... As it really is very very small.
Nowt else on there T-Mobile wise
Click to expand...
Click to collapse
Errr. Yes it will remove everything t-mobile as its a full ROM.
Everything changes to HTC's logos
SGTDavePwnage said:
Errr. Yes it will remove everything t-mobile as its a full ROM.
Everything changes to HTC's logos
Click to expand...
Click to collapse
It shouldn't do mate...
I flashed god knows how many ROMs on my HTC Magic - never once did it remove the Vodafone boot logo...
Just seems a lot of hassle just to get htc logos on to me, all that risk for something minor.
SGTDavePwnage said:
Errr. Yes it will remove everything t-mobile as its a full ROM.
Everything changes to HTC's logos
Click to expand...
Click to collapse
Will it? I've flashed dozens of ROMs onto my G1, and I still have the original T-Mobile splash screen every time it boots.
setspeed said:
Will it? I've flashed dozens of ROMs onto my G1, and I still have the original T-Mobile splash screen every time it boots.
Click to expand...
Click to collapse
I think he may be right. Look at the way the desire boot...
[HTC]
[T-Mobile Logo]
Looks like "HTC" is the unremovable splash screen and T-Mobile is the bootload image (like the ANDROID on cyanogen G1).
setspeed said:
Will it? I've flashed dozens of ROMs onto my G1, and I still have the original T-Mobile splash screen every time it boots.
Click to expand...
Click to collapse
Yes, if you flash a FULL rom it flashes everything. The radio, boot logos the lot.
Im not going to be flashing it every day, just the once to get rid of all the logos.
If you dont want to flash it then DONT. At least if people know that they have the option they can decide for themselves.
As for the people moaning about the risk, that's your choice...but I bet your going to flash a similar update in the near future
PS..I find it interesting that ppl are happy to moan at someone who was willing to try installing a new rom that could have included new things, yet most likely wouldn't have attempted the experement themselves
Apart from mentioned did the update change any other icons, or just the web browser and boot logo.