I just got my OTA update w/new radio and software #
also, the PRL updated to 60667....
dsarch21 said:
I just got my OTA update w/new radio and software #
also, the PRL updated to 60667....
Click to expand...
Click to collapse
can you post all the info from about phone software versions?
pri?
baseband: 2.05.00.06.10
software 1.47.651.1
prl 60067
pri 1.34_003
my Wifi signal seems much stronger...not sure of any other changes.
some widgets needed to be reloaded, but all is well now.
So they didn't do anything worthwhile like lift fps cap?
Did it break root?
hopefully this does not break root.
Ill be the test dummy....backing everything up now. will let you guys know how it works out in about 15 minutes
don't know if it broke root or not, i went back to stock a week ago
It breaks unrevoked. I haven't tested for frame rate, but it does get rid of that "grounding" issue. Also system is much more responsive. before when I tried to add a widget it took a good 5-10 seconds for it to appear on screen, now it's instantaneous. Also opening up manage applications is a good 30 seconds faster than it was for me before and it can scroll through the list much faster. Downloading fps2d now. Multitouch visualizer 2 still shows a bit of a lag, so I can't notice much of a difference there than from before.
Edit: Yes 30fps cap still there.
there is a recovery.img included in the firmware.zip within the package that will likely overwrite any custom recovery you've installed already.
I'd be interested in if this breaks nand rooting given that there is a raido update included as well. Anyone given this a look yet?
frankenstein\ said:
there is a recovery.img included in the firmware.zip within the package that will likely overwrite any custom recovery you've installed already.
I'd be interested in if this breaks nand rooting given that there is a raido update included as well. Anyone given this a look yet?
Click to expand...
Click to collapse
md5sums are different on 3 files - http://forum.xda-developers.com/showpost.php?p=6981144&postcount=27
RADIO:
the radio is updated through a radio.diff.
SYSTEM:
no system/app files are changed - my initial glance was wrong, there is a LOT going on here ...
updated files:
wifi module - BCM4329B1_002.002.023.0396.0402.hcd
android.hardware.camera.flash-autofocus.xml
android.hardware.telephony.cdma.xml
ton of framework files
libCamera_donut.so
libCamera_eclair.so
joeykrim said:
md5sums are different on 3 files - http://forum.xda-developers.com/showpost.php?p=6981144&postcount=27
RADIO:
the radio is updated through a radio.diff.
SYSTEM:
no system/app files are changed
updated files:
wifi module - BCM4329B1_002.002.023.0396.0402.hcd
android.hardware.camera.flash-autofocus.xml
android.hardware.telephony.cdma.xml
ton of framework files
libCamera_donut.so
libCamera_eclair.so
Click to expand...
Click to collapse
So does running the update break Toast's root? I have been holding off on getting the update.
Don't ever push an OTA update from Sprint if you want to keep root. There's a chance it's going to break it everytime.
Let the XDA mages cast improved .zip on the update so you can flash it from recovery.
Or wait until one of the ROM devs integrates the fixes into their ROMs and flash those. I know TrevE is already putting them into DamageControl.
well my first post. All other post have been helpful. For the update it does give much better connection on 4g. Was able to download rate near 5Mb. Prev. I was able to download around 3.2 - 3.5
warnotes said:
well my first post. All other post have been helpful. For the update it does give much better connection on 4g. Was able to download rate near 5Mb. Prev. I was able to download around 3.2 - 3.5
Click to expand...
Click to collapse
Does it do anything for 3G?
So.....is anyone going to drop the radio .zip?
Sounds like some good stuff.
Cant wait for the Devs to start integrating these improvements into their ROMS!
Sorry i dont have any info on 3g before so i dont know but due to weather now could not trust current result but i get less on download then upload. Both less then half .
3G is the same crap it was before the update... not worth the flash.
well you will lose recovery. im about to finish the update.zip for everything except radio. i recommend you wait for me or someone to put out an update.zip before flashing.
Calkulin already released an update for everything except the radio.
Related
MotoBlur 0.2 for HTC Magic 32a
Extremely experimental, try at your own risk, no support offered at all.
This was taken from Drizzy's earlier BetaBeta that I had a play with a few days ago and decided I might as well release it - he's added dream fixes, but not much of it applies to us so far from what I can see so haven't bothered updating it. Thanks should go to Drizzy for his work on getting this to start with tho!
It was a quick repack I made just to have a play with it and see what it was like - so I've added little to it.
Update: 0.2 now with a BFS303 kernel
If something's broken, don't expect me to fix it - my knowledge of the internals of it all is pretty small, but if you know HOW to fix it, feel free to let me know and if its' worthwhile I may even package it again
What's not working:
Wireless
Bluetooth
Laggy initially when the MotoBlur setup is running, but it speeds up once it's finished syncing.
Enjoy!
Downloads
MotoBlur 0.1 for 32a FULL INSTALL from:
http://www.megaupload.com/?d=DBJIDJAU
MotoBlur 0.2 for 32a UPDATE only!
(ie. you still need to install 0.1 first, then apply this!):
http://www.megaupload.com/?d=TFW1LR3Y
Enjoy!
I might try it just for checking it out. But wont just jump the wagon now that you don't seem to dedicated to make updates for it
Anyway thanks for sharing!
Just flashed it and it boots fine
Too bad that it looks like i cant connect to motoblur's servers. I get an error which is something like "blur service seems to be busy" and i'm not able to register:\
can someone port it for 32A the rom made by Drizzy at the dream forum. He seems to able to fix many things. http://forum.xda-developers.com/showthread.php?t=557982
It's not that I dont' want a working rom - I'm just new to this and don't know how to fix all of it without a lot of trial and error
As for Drizzy drake - his one hasn't really fixed the main problems much either - which are wifi/bt and speed.
I really rushed with 0.1 - hadn't realised this wasn't cupcake and was donut and that gives me a bit more incentive to fix it.
I've started on a 0.2 release with a BFS 303 kernel, working modules, xbin and if I can, wifi working - will let you know if/when I am successful.
Let me know if you see any easy fixes in here - I'm still learning my way around a rom like this and would appreciate any help.
Cheers,
Radix999
Thanks a lot for posting the rom! You made my day!
I really see a big potential in the MotoBlur OS, it just need speed and wifi
Hope you can get it fixed
Sorry i'm a bit confused here, maybe i missundestand something but in your first post you write:
And I don't even remember which kernel I put in.. think it was a 2.6.27 one as this is cupcake not donut.
Click to expand...
Click to collapse
but in 2nd post:
Hadn't realised this wasn't cupcake and was donut and that gives me a bit more incentive to fix it.
Click to expand...
Click to collapse
Can you please clear out my confusion
Radix999 said:
MotoBlur 0.1 for HTC Magic 32a
Extremely experimental, try at your own risk, no support offered at all.
It was a quick repack I made just to have a play with it and see what it was like - so I've added little to it.
I forget where I got this from, and I don't even remember which kernel I put in.. think it was a 2.6.27 one as this is cupcake not donut. I was asked to upload this just so other ppl could play.
If something's broken, don't expect me to fix it, but if you know HOW to fix it, feel free to let me know and if its' worthwhile I may even package it again
Enjoy!
Download 0.1 from:
http://www.megaupload.com/?d=DBJIDJAU
Click to expand...
Click to collapse
I cant open this url. a mirror please?
This is an update to the above rom - just updates the kernel to 2.6.29-6-BFS303.
It improves the experience a bit, but it's still very sluggish and I've not been able to get wifi/bt working:
Just download the update.zip below and apply on top of an existing motoblur 0.1 install:
MotoBlur 0.2 for 32a update:
http://www.megaupload.com/?d=TFW1LR3Y
If anyone can help me
a) mount the sqf files correctly,
b) work out what's wrong with wlan and BT
I'd appreciate the help!
nubcake said:
Just flashed it and it boots fine
Too bad that it looks like i cant connect to motoblur's servers. I get an error which is something like "blur service seems to be busy" and i'm not able to register:\
Click to expand...
Click to collapse
like you
Radix999 said:
MotoBlur 0.2 for HTC Magic 32a
Extremely experimental, try at your own risk, no support offered at all.
It was a quick repack I made just to have a play with it and see what it was like - so I've added little to it.
Update: 0.2 now with a BFS303 kernel
If something's broken, don't expect me to fix it - my knowledge of the internals of it all is pretty small, but if you know HOW to fix it, feel free to let me know and if its' worthwhile I may even package it again
What's not working:
Wireless
Bluetooth
Laggy initially when the MotoBlur setup is running, but it speeds up once it's finished syncing.
Enjoy!
Downloads
MotoBlur 0.1 for 32a FULL INSTALL from:
http://www.megaupload.com/?d=DBJIDJAU
MotoBlur 0.2 for 32a UPDATE only!
(ie. you still need to install 0.1 first, then apply this!):
http://www.megaupload.com/?d=TFW1LR3Y
Enjoy!
Click to expand...
Click to collapse
Please 32b!!!!
I'm just wondering - would wifi work if I flashed MotoBlur 0.2 and then flashed the newest kernel for CM ?
neojonax said:
Please 32b!!!!
Click to expand...
Click to collapse
Take a look at the one over at the Dream forum - http://forum.xda-developers.com/showthread.php?t=557982
Briix said:
Take a look at the one over at the Dream forum - http://forum.xda-developers.com/showthread.php?t=557982
Click to expand...
Click to collapse
Ok,THANKS!!!!!
Briix said:
I'm just wondering - would wifi work if I flashed MotoBlur 0.2 and then flashed the newest kernel for CM ?
Click to expand...
Click to collapse
They should be the same except for the ramdisk really.. I used the same kernel I compiled for CM 4.1.999 w/ BFS303
I guess you could always try it and if no luck then flash my 0.2 update afterwards
Thanks it's working
Thanks, it's working on my magic. (v0.1) I like to see how Motorola made it. I really enjoy.
BTW, how can I switch it off?
It does not respond to red Power switch. I saw Motorola's android phone had fewer switches.
I will "adb sync" few times, and pull out the battery...
and I will apply v0.2 after download.
Damm, i tried to flash it again.
I still get the following error whenever i try to register a MOTOBLUR account:
"The Blur service has indicated it is busy".
May it be that they are blocking my region or my mobile operator blocking any connection to their servers? These are the only things i can think about
setupr said:
BTW, how can I switch it off?
It does not respond to red Power switch. I saw Motorola's android phone had fewer switches.
Click to expand...
Click to collapse
Haha.. yeah, I did that too - I discovered that you can also use adb shell and 'toolbox reboot' to turn the phone off.
The Cliq has no end call button, hence why it's not assigned to do anything.
nubcake said:
Damm, i tried to flash it again.
I still get the following error whenever i try to register a MOTOBLUR account:
"The Blur service has indicated it is busy".
May it be that they are blocking my region or my mobile operator blocking any connection to their servers? These are the only things i can think about
Click to expand...
Click to collapse
I managed to sign up a couple of days ago when I first created this rom - but I think too many people have signed up and their phones aren't even out yet so they've blocked new users from signing up or something - I dunno.
Radix999 said:
Haha.. yeah, I did that too - I discovered that you can also use adb shell and 'toolbox reboot' to turn the phone off.
The Cliq has no end call button, hence why it's not assigned to do anything.
Click to expand...
Click to collapse
Haha. I was checking the Dream forum - http://forum.xda-developers.com/showthread.php?t=557982 . They are same situation.
Someone was writing about [Home]+[Menu]+[Power] switches. Is this "Reset" or "Shutdown"? If it is "Reset", it is same like "pull out the battery"....
Also, does "toolbox reboot" shutdown system properly? at least, I expect it does sync file system.
I did in adb shell "toolbox reboot", while pressing [Home] switch. It did not reboot but switched off.
How to switch off with Motorola Cliq ? There must be a proper way of shutting down the system.
Radix999 said:
I managed to sign up a couple of days ago when I first created this rom - but I think too many people have signed up and their phones aren't even out yet so they've blocked new users from signing up or something - I dunno.
Click to expand...
Click to collapse
In the Dream forum, there was a post http://forum.xda-developers.com/showthread.php?p=4677405#post4677405
jaygajay said:
> Is't it possible to jump over Blur account to Homescreen?
You have to delete Setup.apk
If you have adb installed on ur computer plug in your phone and do
Code:
adb root
adb remount
adb shell rm -r /data/app_s/Setup.apk
adb shell reboot
Click to expand...
Click to collapse
The end button issue I think has been resolved by Twisted over the dream forum as mentioned by Drake in Moto v0.5 change log, Can someone install that fix and confirm.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thread has shed some light on new issues and some other fantastic developers have chimed in with a lot more insight into this issue than I had originally anticipated when I started this thread. Please read the below post in FULL, and skip to page 31 for where this discussion picks up. ~> http://forum.xda-developers.com/showthread.php?t=1128135&page=31
DaKlown said:
First I would like the thank the OP for bringing some attention to the issue. This thread seems to have started going in the wrong direction so I will make an attempt to clear some things up and shed some light on the situation with my findings. In my tests so far I cannot really find a combination of radios and pri to solve any of the problems mentioned in this thread. All my findings are using and testing aosp roms. Cm7 really but most aosp roms are based off of cm so this post should be helpful if you use an aosp rom and are having a unreleased pokelock caused by the dialer and/or high android system in the battery usage after phone calls. If you use a sense rom I do not recommend any of these fixes for you. If you use these on a sense rom you will probably mess something up and/or experience boot loops and lots of other problems. That being said lets get started:
Problem 1: The pokelock not being released after a phone call is made or received. This problem comes from the phone app and not the radios as far as I can tell from my tests.
Solution: http://www.mediafire.com/?xzw0zhonmnjw1xs
This file is a flashable zip of a new phone app that releases the wakelock after making a phone call the way its supposed to. I take no credit for this new phone app. It was made by Scott Brady (The same dev that fixed the mms problems on the evo in the cm nightlies about a month ago). I just got this from him. We haven't thoroughly tested it yet so please FLASH AT YOUR OWN RISK. Make a nandroid. I will say this though. In my current tests I have made about 40 calls with no pokelock and it seems to work wonderfully. The only reason I'm posting it early is because if you're like me and you know something is wrong then you want an immediate fix. Also using the killall command in terminal emulator or adb after every call can get tiresome... I have also tested with multiple radios In case anyone was wondering.
Problem 2: Android system spikes in the battery use in settings after a phone call is made or received.
Solution: I'm close but not finished yet...
Please read what I am about to say all the way through. What I have found is that the current proximity drivers for the evo are causing the android system in the battery use to go bonkers. I'm not really sure how much it affects your battery because it seems that it causes all your apps to not even show up in your battery stats. Proof? I have supplied two files in a zip:
http://www.mediafire.com/?mxks9k60shlckk5
THIS IS NOT A FLASHABLE ZIP. USE AT YOUR OWN RISK. One file is "sensors.supersonic.so" where I edited it so that android cannot find the drivers for your proximity sensor so it never comes on. The second file is "sensors.supersonic.so.bak" which is a backup of the original .so file that you can use if you want to turn your proximity back on. When I edited my sensors.supersonic.so file so the proximity wouldn't come on android system no longer spiked in my battery stats after a phone call!!! Also I tried to add a command to the build.prop first to disable the proximity sensor which would have been better practice but the command didn't work. Not sure if that's because cm overrides it or what. I can pretty much guarantee that this is an aosp problem and not a sense problem so if you use a sense rom you don't even need to worry about this. I doubt HTC has faulty proximity drivers on a stock rom... I could be wrong but I doubt it, they have screwed up in the past...
So what now? Well if you're on an aosp rom and the current proximity drivers work for you then you know what they say, "If it ain't broke don't try to fix it." For the rest of us I am in the process of trying to find some proximity drivers that don't make battery stats go haywire. Lets try to keep the thread relevant to findings so that we as a community can come closer to a fix instead of all the repetitive questions and things that don't help us get closer to a true fix... Don't forget the thanks button if you found this useful =P
Thanks for your time.
Edit: I would also like to add that I am on the most current radios, nv, and pri with no wakelock or spike in my android stats. And If you flashed the combo from the Calkulin thread you are probably missing the newest NV file because its not in there.
Click to expand...
Click to collapse
I have left the previous OP in-tact so if you would like to follow from the beginning you may. At this time, I can no longer recommend the below steps!!!, but I can still let you know that the GPS driver files below are pretty damned awesome.
~J
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I believe I have FINALLY figured out how to solve the infamous "Wake-Lock" or "Keep Awake" of Android OS that seems to drain the battery on end. It took several hours of reading forum posts, several DAYS of testing on 5 different EVO's (I work at Sprint) and have tested the fix across a multitude of ROM's, including Sense.
I will post a short history of the issue as I know it here for those of you hitting this thread for the first time, skip below for the solution I have found.
Requirements:
-Radio S-OFF
-AmonRA Custom Recovery
-Android System always at or near the top in your battery usage
History
To the best of my knowledge the issue first started to appear in AOSP ROMS when the Cyanogen team stopped using HTC Blobs to control the driver for the GPS, As a great many custom roms utilize cyanogen for many of their own enhancements and fixes the problem began to propagate out to the community at an alarming rate. Restoring your system back was a hit or miss on if it actually solved the issue or not, and more RADIO files were getting leaked/posted online and many people were flashing a multitude of firmwares to their handset making the issue confusing and seemingly with no correlation on handsets with the people having issues.
I came across ViRuS Kingdom ROM and read about 1000 pages of posts and the conclusion from their team was that the PRI needed to be downgraded to 1.77 and behold, it worked......(mostly)......
I wondered how the PRI had anything to do with the fix, and mixed that with many, many other forums I have read on the issue realized myself that there was a correlative cause and that we all did indeed have something in common. Everyone was on a different radio/pri/nv/wimax combination. I decided to run some tests myself as I have access to ****loads of handsets being a Sprint employee and here is what I have found.
I have found exactly 1 combination that has fixed the issue on every single handset I have tried it on, hands down across the board on a great cross-section of ROMS.
-Cyanogen
-Kingdom
-MIUI
-SavagedZen
-Synergy
-Mik's
-Sense 3.7 build
-Sense 4.22 build
-FreshEVO 3.5
-FreshEVO 4.1
______________________________________________________________
THE FIX!
The fix is a combination of...
Radio: 2.15.00.05.02
PRI: 1.77_003
NV: 1.90_003
WiMAX: 27243
GPS: HTC VISION GPS ".so" file
-Download the below PC36IMG.zip It is a custom Combo Radio installation I created that will set your Radio/Pri/NV/WiMAX to the above settings
-Move the PC36IMG.zip file to the root of your SD-Card and reboot the phone into bootloader. It will load the file and prompt you for an update, you will see on the left 3 items that will be upgraded on your handset. Hit volume up to accept
-Reboot the phone after the Radio update, go ahead and remove the PC36IMG.zip file from the sd-card and put it in a safe place
-Download "GPS_FIX_Flashable_Vision.zip" and put on your SD-Card
-Reboot into Recovery (I highly recommend AmonRA 2.3)
-Wipe Cache & Dalvik Cache. Now wipe them again just to be safe
-Choose "Install zip file from SDCard"
-Navigate to GPS_FIX_Flashable_Vision.zip and choose install
-Once installed go down to "Other" and "Fix UID mismatches"
-Reboot the phone
______________________________________________________________
Now heres the weird and tricky part so listen closely. At this time you will still see the Android System in your battery stats. This is normal. To see the fix, you need to charge your phone fully to 100%.... and honestly give it an extra 10-15m on the charger after it says its full. Now..... REBOOT the phone when you pull it off the charger. Use the phone a little bit, make a phone call... it may still pop up around 5%.... again this is normal..... after 2-3 hours however it will be gone, completely and utterly gone... it will never show up again.
I have tested this on 5 handsets hardware revision 0002 0003 & 0004, and about 6-7 ROMS both AOSP & Sense and have yet to see Android OS re-appear. This is not to say that it will work for everyone, but I think that after my testing, there's an excellent chance that this will work for you.
Please leave feedback if this works or does not work for you please so that everyone can benefit from your experience, either good or bad. Please, please please, follow the final instructions carefully, it does literally take a few hours to test and get the old stat to wipe from the battery history, that is why I started this, literally 2 weeks ago, and am just posting now. I tried TONS of combination's and this is the one that struck gold, then I needed to test this combination on all of the phones I had sitting in the back for this. If mirrors are needed please let me know, and I will upload.
Good Luck!
PC36IMG.zip
Radio: 2.15.00.05.02
PRI: 1.77_003
NV: 1.90_003
WiMAX: 27243
http://www.multiupload.com/HJOWHOLW4G
Qualcomm Vision GPS Driver
Sense GPS Driver File from Qualcomm Vision
http://www.multiupload.com/11IWQ99VKH
EDIT:
A few reports on certain ROMS of excessive CPU usage after Android OS has dropped off the list
Please use one of the two below GPS drivers if you experience 100% CPU usage (Source: http://forum.xda-developers.com/showthread.php?t=1132412 )
~>AOSP<~
CyanogenMOD 7 Nightly 39 GPS Driver (HTC Blob File Compiled)
http://www.multiupload.com/NIJEKWGDEQ
~>SENSE<~
KingdomROM GPS Driver FIX
Sense GPS Driver File from EVO 3D aka "Kingdom"
http://www.multiupload.com/ZMOXSDJBOE
EDIT: It has come to my attention from a few members in PM, that the issue doesn't always "take" right away. People have reported that it can take 2 or 3 attempts, and 9 different people have reported that they have run the 1.77_003 NV after flashing the radio, and then running the GPS to resolve the issue.
---------------If the above fails for you after a 2nd attempt. Please follow these Modified Instructions
-Download the below PC36IMG.zip It is a custom Combo Radio installation I created that will set your Radio/Pri/NV/WiMAX to the above settings
-Move the PC36IMG.zip file to the root of your SD-Card and reboot the phone into bootloader. It will load the file and prompt you for an update, you will see on the left 3 items that will be upgraded on your handset. Hit volume up to accept
-Reboot the phone after the Radio update, go ahead and remove the PC36IMG.zip file from the sd-card and put it in a safe place
-Download "GPS_FIX_Flashable_Vision.zip" and put on your SD-Card
--MODIFIED STEP-- Download "EVO_NV_1.77_003" ~> http://www.mediafire.com/file/i1p436188iw0iqb/EVO_NV_1.77_003.zip (source: http://forum.xda-developers.com/showthread.php?t=715485) & put the file on your SD-Card
-Reboot into Recovery (I highly recommend AmonRA 2.3)
-Wipe Cache & Dalvik Cache. Now wipe them again just to be safe
-Choose "Install zip file from SDCard"
--MODIFIED STEP-- Navigate to EVO_NV_1.77_003.zip and choose install, once installed you will see a note at the bottom to reboot the phone. Choose the "Reboot Phone" option in AmonRA and let the phone reboot
-You will see the screen blink, go into recovery and hang, this is completely normal, just wait about 30 seconds and the phone will Automatically put you back into your recovery
-Choose option Flash zip file from SD-Card
-Navigate to GPS_FIX_Flashable_Vision.zip and choose install
-Once installed go down to "Other" and "Fix UID mismatches"
-Reboot the phone
Pickup the rest of the steps from above. PLEASE REPORT back your experience!
++++++++++++++++++++++++++++
wow sounds like it could work but im too busy with work...hopefully this thread will get more people to try this fix and see if it works for them....my fingers are definitely crossed!
thanks for this.. i will try it out.. i currently allready have the 1.77 on my phone.. dont know bout the radios.. last time i tried to flash radios i had net closing issues..
dgrobe2112 said:
thanks for this.. i will try it out.. i currently allready have the 1.77 on my phone.. dont know bout the radios.. last time i tried to flash radios i had net closing issues..
Click to expand...
Click to collapse
I have had issues like this as well, but only when I do the radio's through the recovery partition. That is why I enclosed it as a PC36IMG.zip file so that it could be done by the "official" HTC update method. I have had no issues doing it this way. Good luck, looking forward to hearing that your issue is resolved.
Fails to install Can't find update script... any ideas??
CM7.0.3.1
JBabey said:
I have had issues like this as well, but only when I do the radio's through the recovery partition. That is why I enclosed it as a PC36IMG.zip file so that it could be done by the "official" HTC update method. I have had no issues doing it this way. Good luck, looking forward to hearing that your issue is resolved.
Click to expand...
Click to collapse
i dont have to reflash my rom do i?
downloading now, should i clear battery stats?
glennpettit said:
Fails to install Can't find update script... any ideas??
CM7.0.3.1
Click to expand...
Click to collapse
Use AmonRA, the update script is not in EDIFY (I may have to fix that later)
downloading now, should i clear battery stats?
Click to expand...
Click to collapse
You shouldn't need to. If you are clearing your battery stats, do that for the reasons its intended, and make sure you follow the top off/drain instructions when doing so or it could lead to false readings.
i dont have to reflash my rom do i?
Click to expand...
Click to collapse
No, you are only updating your radio and thus will not lose your data or have to reflash your ROM. Please remember to follow the short instructions at the end for charging/reboot/2 hours before reporting back here please.
flash the virus gps fix even if your not on the kingdom rom ?
I am using RA.
might give this a shot later, don't have high android OS, but might be interesting none the less
glennpettit said:
I am using RA.
Click to expand...
Click to collapse
I re-uploaded the zip file, please redownload and lemme know if this one works for you.
Thanks!
might give this a shot later, don't have high android OS, but might be interesting none the less
Click to expand...
Click to collapse
If it aint broke..... lol (granted this will put you on the latest radio)
And.. I have found my GPS locks to be instantaneous on this driver.
flash the virus gps fix even if your not on the kingdom rom ?
Click to expand...
Click to collapse
I personally use CyanogenMOD Nightly 100 at the moment and it works like gangbusters on this ROM.
CheesyNutz said:
flash the virus gps fix even if your not on the kingdom rom ?
Click to expand...
Click to collapse
I used the GPS drivers provided by Vaelpak...and it worked! I'm using Salvage-Mod v1.2.1 GB 2.3.3 and my GPS pickup is now instant!
And to the OP, I haven't had this issue...but great work!!!
What is acceptable for Android System usage? I'm at 23% right now and it's third on my list behind Cell Standby and Phone Idle. Is 23% high? I know I've seen it higher before. I am interested to hear more feedback on this fix.
I assume when flashing a new nightly, I would need to reflash the GPS driver again?
That's not even the problem for me, I'm on hardware 4 and with any of the 2.3.3 Roms the highest thing draining my battery is the display any ideas on how to reduce that. It's between 50%-right now at 86%. I have turned off auto display and notifications. Thanks in advance for any help.
Sent from my PC36100 using XDA Premium App
I had major issues with bat life and wake (android system) after flashing calkulins radiosfrom the ota 4.2.2 release. I downgraded radios to
Baseband 11.19
Pri 1.77
NV 1.77
Wimax 27167
Still have issues though. Is it safe to flash radios that many times. I have heard it can scree stuff up so should I flash your combo. Also my GPS works fine using cm 7.0.3.1 do I stool need to flash your GPS fix.
Cm 7.0.3.1
Sz 2.1.0 Cfs havs sbc
V0003
I did this for the hell of it even though I wasn't having too many issues on Virus revo 1.3 however this fixed my intermittent wifi issue and seems to have improved my battery too. Thanks a lot
Flashing it now while I'm at work (its slow today)
i am finished with the install of the zips, and rebooting now.. you said 2 hours.. i will post back my findings.. to let you know what is going on..
also.. as others have mentioned.. i havent been having any issues with the kingdom revo 1.3 rom.. other than battery drainage.. i dont have wake issues.. but wanted to see if this fixes anything.. will give updates..
With Sunshine unlocking droid Turbo Bootloader I will be moving on to making ROM's not just an img. please see my Forum on XDA here and my Website Computerfreek.com Here for more info.
I will continue to do MOFO support for the next month or so as users make the switch.
Computerfreek274_Turbo_lollipop (SU4TL-44)
Also On my website Computerfreek.com Now has updated help and support how to setup stuff like adaway,Boot anamation, Dpi and more. Also I will be posting Pre-Released images there days be for there on XDA. There will also be images some custom images that will not ever be listed on here on XDA for I will not support them. So please check out the site it is still a work in progress but it is getting there. As of right now I did not get custom IMG listed and the newest ver is still 1.6 and it is listed below.
This Firmware upgrade to 5.1 SU4TL-44 from 4.4.4! VIA Mofo.
If you took the OTA 5.1 update you out of luck as you where told not to on here over and over. Go check out sunshine root maybe coming soon for locked 5.1 users.
If this software somehow kills your phone I am not to be held liable.
PLEASE BACKUP YOUR DATA 1st For the best speed and no bugs if you are coming from 4.4.4 for the 1st time I recommend that you backup your photos,music and other data. and when you get to step 3 wipe Data and cache. It is not a must but for me to give you support this is a must.
Thanks to @firstEncounter for his great post and images. Thank you @mattlgroff for his help and everyone who sent me links to the OTA and Full ver.
Thanks to http://motofirmware.center/files/ for hosting stock lollipop IMG's so I an update missing or outdated system files I had.
Big Thanks for PON-3 Audio mod from @mrchezco1995 and his forum is here
Please support better battery stats and give a big thanks over on there forum here. The better battery stats companion app installed in 1.4 will only work with paid ver of bbs from google play.
Thank you guys so much.
Features:
Stable! - I don't publish images without exhaustively testing them. If you have any issues to report, reply to this post and either myself or the community will rally to help fix the issue.
Much better battery life! - This image focuses on battery savings without compromising performance. Your phone will last much longer while running this system image.
Multiple versions - Custom version from DPI dpi higher resolution to Custom fonts
Fast! - This image is lean, fast, and enhanced for performance.
No bloat! - All bloat that is available on the Play Store has been removed. Extra files (like help videos and help audio files) have also been removed.
Optional adblocking! - Adblocking via AdAway that can be toggled on and off.
Now with Pon-3 Audio/ V4A - Increase the volume and the quality of audio output from the Droid Turbo by enabling VIPER4Android which comes bundled in this system image.
Enabled for XPOSED Updated to newest ver. - This system image has been enabled for the XPOSED framework as well as includes BusyBox.
For better support I have removed old versions on here my focus is to have better support for all of you starting from 1.5+
Please Read! If your not on Kernel Version 3.10.40-perf-g90ddf4a Sept 1st 2015 Please Download and flash all .IMG files in this zip here. To find the kernel build go to settings > About phone. Most of you guys will need to update!
Computerfreek274_TurboPop_1.6 Update. 11/07/2015
Now With Turbo 2 Command Center. Screenshot
Download 1.6 Here
Change Log.
Updated .img files in 1..6 No need to download Img pack when upgrading from KK or to update your kernel,modem,etc... all files are updated 1.6 Zip.
Cleaned up some more junk from system
Updated some apps.
Removed music2 aka google music.
Samsung Sans Font IMg's has the IOS9 emojis.
Turbo 2 Command Center
Download 1.5B Here Updated 10/16/2015 Base on SU4TL-44
Download 1.5 Here 10/5/2015
Custom fonts in 1.4 I will update 1.5 as needed.1.4 Download Here.
All Files and IMG's files that are needed to install my IMG are Zipped with all my system images from ver 1.3 and up Just download 1.4 or 1.3 and unzip open the help file and do a step by step install.
Please Read 09/12/2015 For Android Pay support and Setup please see Post #3
You can still download 1.3 and 1.3A here.
[/URL].
1.5B Change Log 10/16/2015.
Updated to SU4TL-44
Updated Xposed
Boosted overall audio and mixer profile updated
Fix Pon-3 audio buffer for large audio high bit rate files buffer from 32m to 48m
Few other tweaks also see 1.5 for more info. This has all the tweaks from 1.5 and 1.5 is the best battery and fast running ver to date.
1.5 Change Log 10/5/2015
Removed more junk like maps and stuff as you have updated ones from market.
Added for more Tweaks for faster GPU and CPU and more memory.
In call VOL boosted default was max 3 now max 10.
Better GPS.
Battery Seems much better with memory fixes.
1.4 Change Log 6/12/2015
Android Pay Support Please see post #3 For more info.
Custom Fonts There will be 1.4 img with custom fonts. More to come check one of the last post for more info.
Some Of the changes listed here is from 1.3A
PowerSave Is in all from 1.3A and up.
Removed some more bloat.
SuperSU is the stable ver.
Xposed to newest ver Please uninstall your old xposed.apk be for you flash.
HDR Camera setting is fixed as of 1.3A
Updated some system files.
Tweaked GPS a bit for faster lock.
PON-3 updated
Fixed audio profiles for PON-3 to match are turbo for a more stable PON-3 audio.
Updated Mixer Profiles for better audio.
mixer_paths updated louder audio as we had in my ver of KK. 09/02/2015 I had to make a new one for Lollipop as the old mods did not work.
updated to work better with the turbo Pon-3.
There is now a set of 1.4 Pure/MAX IMG's also for none Verizon users only.
More help and support can be found on my website at Computerfreek.com for full install and updates Or read below.
How to install
See Post number 2. http://forum.xda-developers.com/showpost.php?p=61636340&postcount=2.
To setup DPI,Adaway and more.
To install system img via mofo see post 2.
Setup Adaway Install AdAway from Play Store. Run AdAway (don't download hosts files yet) and go to settings - preferences. Check 'allow redirections' and under 'target hosts file' select '/data/host Then go back and hit update host files.
Xposed In Pre-installed and setup just install the mods you like to use.
On Pon-3 V4A Open Pon 3 and check the sound devices you like to enable.
Setting up an custom boot animation place bootanimation.zip under /data/local/moodle/bootanimation.zip for more info or watch this small video on how to. https://www.dropbox.com/s/lom6zduant...rding.mp4?dl=0
For 493 Builds to fix the ambient display being off set you must install xposed MOD app settings found here or download it from inside of xposed. and set moto diplay to 640 DPI. If you need more help check the forums here.
Flashing from KitKat to Lollipop
This is a nice well written guide by @Purpeltendire Thank you @Purpeltendire Thank you for this great guide.
If you are new or upgrading and need more help I updated help and info on my website also at computerfreek.com
Steps to flash from KitKat to Lollipop - This assumes that you're currently using a rooted KitKat image already, and have used mofo to get root.
BACK UP ANY DATA YOU DO NOT WISH TO LOSE.
YOU ARE ULTIMATELY RESPONSIBLE FOR ANY LOST FILES OR DEVICE PROBLEMS.
Make sure you have a good hour or two set aside, at the minimum. It’s probably not a great idea to try this right before work or class.
Install mofo, ADB, and fastboot on your computer if you haven't already. On Windows, I like using this for ADB/fastboot.
Download the image of your choice.
Download 5.1_images.zip. Extract the files, and put them into the same directory as fastboot. Next, boot into your phone's bootloader (turn the phone on by holding power and volume down), and flash each file seperately using fastboot:[/FONT]
Code:
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash radio radio.img
fastboot flash recovery recovery.img
fastboot erase ddr
Now open mofo_gui.bat, and flash the system image you downloaded:
Code:
mofo flash Your_imagename_here.img
Once that finishes, you want to try to boot the phone. Select Boot to System from the bootloader and then go grab a snack - chances are, it will sit at the Motorola boot screen for some time. After about five minutes, press and hold power to turn the phone off.
Next, boot into the bootloader again and select Recovery. You will likely get a "Dead Android" screen with "No Command." To bypass this, hold power and tap volume up (if that method does not work after a few tries, hold volume up and press power).
Now that you're in recovery, you're wiping both data (factory reset) and cache. Wipe cache first - this may take a very long time (20-30 minutes), especially if you've never done it before. Wipe data/factory reset second. If you're feeling paranoid, wipe everything again.
From recovery, boot to the bootloader. From bootloader, boot to system. This first boot might take some time as well.
Assuming all went well, you should see a Lollipop setup screen within 10-15 minutes. Congratulations!
Remember that your device is now in “like new and improved” mode. You’ll need to restore your apps and settings from wherever you backed them up to, and you'll still need to get the APKs for Xposed and AdAway. Again, nobody else is responsible for any of your lost data.
[FONT=Arial[/FONT]
For more help see Computerfreek.com
Android Pay Setup and Support. 9/28/2015
Update The updated android pay from google market is no longer working with root so if you flash back to an rooted img after setting up this one android pay will stop working.
9/30/2015
For Working android play and info please go to this forum I have made an IMG with tweaks and more here with working android pay.
Tomsgt said:
just talked with the dev behind moforoot and he said that mofo was patched in android 5.1 but he may look into other ways to get around it.
Click to expand...
Click to collapse
This was stated in another thread. I don't know if you heard, but I'm holding on that there's still hope. Is there still a possibility to be able to make a rooted image? I'm really hoping that we'll be able to have root with lollipop, but at the same time, I don't want you to put in all this time and effort for nothing.
Sent from my XT1254 using XDA Free mobile app
There's a lot of places with the ota, try one of them
Jaocagomez said:
There's a lot of places with the ota, try one of them
Click to expand...
Click to collapse
he needs the firmware img's
Michaelmansour1997 said:
he needs the firmware img's
Click to expand...
Click to collapse
Those will be released in the following days
Jaocagomez said:
Those will be released in the following days
Click to expand...
Click to collapse
noooo i need them today to fix my paperweight
Ahhhhh! I can barely wait!
Downloading the update NOW.. How do I get a dump and copy of the firmware OFF the turbo? Where is it located.. Using ES File Explorer to access /
MoPhoMike said:
Downloading the update NOW.. How do I get a dump and copy of the firmware OFF the turbo? Where is it located.. Using ES File Explorer to access /
Click to expand...
Click to collapse
I am far from the skill level of any rom creator but every google guide I've found seems to indicate root (even temporary root) is required to do a system dump. Is temporary root possible on the lolipop update? If theres another way, please post a guide @computerfreek274 so one of the people who has updated is able to easily help us out and get the ball rolling.
Correct me if I'm wrong, but can't you simply extract the system.img from the OTA zip using this method? http://forum.xda-developers.com/showthread.php?t=2497883
TheSt33v said:
Correct me if I'm wrong, but can't you simply extract the system.img from the OTA zip using this method? http://forum.xda-developers.com/showthread.php?t=2497883
Click to expand...
Click to collapse
Yes but I like to get ahold of a system dump. I been working on the ota today.
Pretty stoked!
Sent from my XT1254 using Tapatalk
siegesoldier said:
I am far from the skill level of any rom creator but every google guide I've found seems to indicate root (even temporary root) is required to do a system dump. Is temporary root possible on the lolipop update? If theres another way, please post a guide @computerfreek274 so one of the people who has updated is able to easily help us out and get the ball rolling.
Click to expand...
Click to collapse
If you Google it there was a way to do it without root. I do not care if it is a system.img dump like that. If you can just copy the system folder to your sd card i do not think you will need root for that use es file man and send it my way that will be great.
Want to make sure so if you have root via MOFRO then you should wait and not install the OTA and wait for new System Image from the Freek!!!
computerfreek274 said:
Yes but I like to get ahold of a system dump. I been working on the ota today.
Click to expand...
Click to collapse
Gotcha. Well unless someone has had luck with Kingroot (early reports said that it didn't work), I don't think that will be possible.
EDIT: Nevermind. It's totally possible. I'll try to track down someone who can get it to you.
computerfreek274 said:
If you Google it there was a way to do it without root. I do not care if it is a system.img dump like that. If you can just copy the system folder to your sd card i do not think you will need root for that use es file man and send it my way that will be great.
Click to expand...
Click to collapse
Pulling /system with adb should be easy and noob-proof.
Sent from my LG-E400 using XDA Free mobile app
TheSt33v said:
Correct me if I'm wrong, but can't you simply extract the system.img from the OTA zip using this method? http://forum.xda-developers.com/showthread.php?t=2497883
Click to expand...
Click to collapse
there are no system img's in the ota, its a flashable zip not an xml
Is this what we're looking for?
http://forum.xda-developers.com/droid-turbo/general/lollipop-5-1-coming-23-11-38-t3146663/page4
I have the restore firmware ... where should I host it?
VRZ_XT1254_SU2-12_12_1FF.xml.zip
Click to expand...
Click to collapse
http://forum.xda-developers.com/droid-turbo/general/droid-turbo-lolipop-firmware-t3147979
http://androidbiits.com/n920tuvu1bo...boh6-t-mobile-samsung-galaxy-note-5-sm-n920t/
Just got it this morning
Got mine too. I wonder what the improvements were. I guess we'll find out later.
Sent from my SM-N920T
I also received the update. Chicago
I guess we will figure out the improvements later.
BOH6 for anyone that didn't get it or are wondering.
B0H6 got it this morning. Activated my samsung pay framework and stuff so i just activated my BOA card, fixed some bugs also apparently.
Just updated myself.
Got mine this morning too, but haven't installed it.
Sent from my SM-N920T using Tapatalk
I shouldn't complain about receiving frequent updates...
Do you guys know if there's a way I can create a script or something to automatically swap out some system files, delete some system APKs, etc between flashes?
When BOH4 came out, I had to Odin flash the stock rom to get the modem update, then flash a deodexed + rooted BOH4, wipe cache + ART cache, manually de-bloat again, replace the sysem/media/ files for PowerOn and PowerOff, and delete the default ringtones/alarms/alerts sound files to get everything back to the way I had it (I prefer using CM's sounds over Samsungs and especially T-Mobile's).
I would assume there's got to be some way I can automate at least some of that process since I'm working with the same files every time, right?
Anywho - if anybody knows what they 'fixed' with BOH6 please let us know!
Kalm_Traveler said:
I shouldn't complain about receiving frequent updates...
Do you guys know if there's a way I can create a script or something to automatically swap out some system files, delete some system APKs, etc between flashes?
When BOH4 came out, I had to Odin flash the stock rom to get the modem update, then flash a deodexed + rooted BOH4, wipe cache + ART cache, manually de-bloat again, replace the sysem/media/ files for PowerOn and PowerOff, and delete the default ringtones/alarms/alerts sound files to get everything back to the way I had it (I prefer using CM's sounds over Samsungs and especially T-Mobile's).
I would assume there's got to be some way I can automate at least some of that process since I'm working with the same files every time, right?
Anywho - if anybody knows what they 'fixed' with BOH6 please let us know!
Click to expand...
Click to collapse
You could create your own update flashable zip to do what you are wanting. If you are replacing files with the exact same name or just adding new files it is easy. You can delete specific files that you don't use and make it as complex as you need or like. If you don't know how to work with the updater-script this would be a good project to learn on. Do some research on making a flashable zip and have some fun with it.
i also got this update in morning. it only brings improvement to video calling.
New Features: NA
Improvements: Video Calling UI updates
Source: https://support.t-mobile.com/docs/DOC-23225
Well that explains the quick update from the last one. Don't use the feature but an update is exciting anyway. New kernel and baseband is a welcomed addition also even though I get great service in my area
Sent from my SM-N920T using XDA Free mobile app
Here is another link to BOH6 firmware. Sammobile server seems to be down ATM
http://samsung-firmware.org/download/Galaxy Note5/0kO8/TMB/N920TUVU1BOH6/N920TTMB1BOH6/
Sent from my SM-N920T using Tapatalk
I received two updates this morning one after another. Both were successful.
Why don't we post to the stickied posts about these updates?
Sent from my SM-N920T using Tapatalk
I just got the OH6 update anyone know what this one is for?
KingMarkous said:
I just got the OH6 update anyone know what this one is for?
Click to expand...
Click to collapse
Samsung Pay enable on mines, plus a couple bug fixes. New kernel and baseband also.
My memory management has gotten better or worse, more free ram.
beep
I took the update without even thinking about root. I guess I can't root yet. Now the wait begins!!
Currently here is the system dump. Working on kernel first just not what I normally do so it's playing with me lol.
First off this is built off the LG Aristo LGMS210 from Metro PCS.
This is going to stay as a stock base NOT ASOP.
OTAs are always last. It's nice to have a good strong base then update as needed so it won't have security patches from the OTAs 10min after the release. Right now I did not update before doing a system dump.
The system dumps or roms can be used by others just please give credit. If someone makes a kernel give them credit also please after asking them.
YouTube - http://bit.ly/2mnD9iH
FaceBook - http://bit.ly/2m73eSh
Twitter - https://twitter.com/real_DC13
Instagram - https://www.instagram.com/the_real_dc13/?hl=en
Slack - https://ti-xdevelopment.slack.com/
Change Logs
System Dump - Dump of the system out of the box.
Roms are currently getting worked on kernel is not liking being flashed if you are good in that end let's pair together. Will provide dumps to test kernel on modded ROM till it boots then will switch to no dumps.
Stock ROM - Just as the name says fully stock but rooted ROM.
Modded ROM -
Added
Pixel Launcher
Deleted
LG launchers
LG Themes
Google Play Apps
Updated
None yep
Downloads
Google Drive - https://drive.google.com/folderview?id=0B1TAdEWXjajpczNUcWswU0J1VFU
This is just a spare just in case I get board now to clean this up
Thank you!
Glad to see this device get some attention, it's a decent phone and we already have root, twrp, and nougat. Just missing tweaks here and there.
Im just having kernel issues hoping someone can get us a custom one. So far I have deleted a bunch copied pixel launcher and this thing is amazing now. Even going to make a car puter version on this phone.
Works but looks bad but got Samsung Gear VR working on this thing. Lol. Once we get another kernel we can get that flashed on everyones phone not doing my way.
How can I make this system dump a usable rom?
Umm you can't it's for another device to. Really install pixel launcher. Make a system backup. Copy pixel launcher folder from data app to system priv app not delete all the launchers and apps I can post what I have then you factory reset your phone then once booted you will have pixel launcher and the feel of how my phone will feel till I can get a kernel and flash that way.
So it just adds the pixel launcher as a system app?
I goofed
Is there anyway you could upload just the mixer_paths.xml file located in system/ect by chance? Went to go try to increase headphone volume and sneezed and fubard the file somehow.... Now i have no sound at all on anything amdthe phone dont even detect headphones. Id download the dump/or rom but my internet speeds are just too darn slow to get at 960 mb file. *metro slows it down below 20k a second*
Install pixel launcher and anyother app you need when you do a factory reset it will let you boot just fine.
Xeratais167 said:
Is there anyway you could upload just the mixer_paths.xml file located in system/ect by chance? Went to go try to increase headphone volume and sneezed and fubard the file somehow.... Now i have no sound at all on anything amdthe phone dont even detect headphones. Id download the dump/or rom but my internet speeds are just too darn slow to get at 960 mb file. *metro slows it down below 20k a second*
Click to expand...
Click to collapse
I will upload a raw dump in a bit tonight.
Can someone make a how to video on this
In for updates lol
Made a how to video rendering now ill upload it tomorrow and you guys can follow it to get a similar out come as if you were using my rom. Till we get a kernel.
Is there any way I can assist?
williamschromebook said:
Is there any way I can assist?
Click to expand...
Click to collapse
If you want to get a kernel thats all we are missing.
Till then we have something we can get the similar feel.
https://youtu.be/PhvYEtboTc4
This will allow you to get the feel of my rom with out some of the updates.
dc13 said:
If you want to get a kernel thats all we are missing.
Till then we have something we can get the similar feel.
This will allow you to as wasthe feel of my rom with out some of Qthe updates.
Click to expand...
Click to collapse
Has anybody had a chance to look at my GPS issue? Even when I open it up in the secret menu it tells me that there isn't gps
Sent from my HTC 0PJA2 using XDA Labs
williamschromebook said:
Has anybody had a chance to look at my GPS issue? Even when I open it up in the secret menu it tells me that there isn't gps
Click to expand...
Click to collapse
Have you tried a factory rest did you disable a setting. Might have a dead gps since we dont really have roms.