I need a tester that is unable to wipe SD-Ext when doing a ROM install with a data wipe. Please contact me on IRC:
http://webchat.freenode.net/?channels=koush
Related
Hello, I'm just trying to gather as much information as I can and be clear about everything before I install a custom ROM. I have already rooted the nexus s.
The ROM I'm interested in is this CyanogenMod 7.
In their installation instructions it says
- Format the system, data & cache partitions of your device.
- Perform a factory reset.
From another guide (AddictiveTips) they just tell us to do the following
- Select wipe factory/data reset.
- Now, wipe cache and dalvick cache.
The xda thread tells us to format system, data, and cache partitions. But the AddictiveTips guide only seem to tell us to format the data & cache partitions.
So my question is, does the system partition automatically get formatted while installing the new ROM, or do you have to manually format it by going to mounts and storage > format system before installing the ROM?
Also, do you guys recommend to format all the required partitions by going to mounts and storage or by selecting wipe factory/data reset and wipe cache from the main menu? Thanks in advance.
...anyone?
Wipe factory/data reset (this will obviously also wipe the caches)
Install zip from SDCard (ROM)
Reboot.
Greetz
plz help...i was complted installation biftor v4.7 ..when the first bootup it stck on samsung log...help plzzzzzzzzzzzzzz..wht i can do..also wipe data by given biftor super scrip..wht can i do..anyone help
First install v4.0 and then flash v4.7
To install v4,0 and then v4.7 read the opening post.
Steps:
Goto recovery
Backup the existing ROM (Just In case). Also backup the /efs folder (just in case)
wipe dalvik cache (in advanced)
wipe cache
wipe data
format /system (optional - read below)
install the superwipe
install the 4.0
wipe cache
wipe dalvik cache
reboot.. till the rom boots..
Then Flash v4.0
then turn off (no need to complete the setup procedure - you can do this after installing v4.7)
install the 4.7
instal the market zip
wipe cache
wipe dalvik cache
fix permissions
then reboot!
I usually also do a format /system to ensure a clean install. Prevents some force closes later
Please verify the md5 of the files you downloaded to ensure they are not corrupted.
v4.0 (MD5): 990bf3ddb2a3a1374995d1ff5946bf9c
v4.7 (MD5): eb934715f441bd5ce6d747493ca91a38
I also installed v4.7 yesterday. Worked great! No issues so far
anshad666 said:
plz help...i was complted installation biftor v4.7 ..when the first bootup it stck on samsung log...help plzzzzzzzzzzzzzz..wht i can do..also wipe data by given biftor super scrip..wht can i do..anyone help
Click to expand...
Click to collapse
ritz28 said:
First install v4.0 and then flash v4.7
To install v4,0 and then v4.7 read the opening post.
Steps:
Goto recovery
Backup the existing ROM (Just In case). Also backup the /efs folder (just in case)
wipe dalvik cache (in advanced)
wipe cache
wipe data
format /system (optional - read below)
install the superwipe
install the 4.0
wipe cache
wipe dalvik cache
reboot.. till the rom boots..
Then Flash v4.0
then turn off (no need to complete the setup procedure - you can do this after installing v4.7)
install the 4.7
instal the market zip
wipe cache
wipe dalvik cache
fix permissions
then reboot!
I usually also do a format /system to ensure a clean install. Prevents some force closes later
Please verify the md5 of the files you downloaded to ensure they are not corrupted.
v4.0 (MD5): 990bf3ddb2a3a1374995d1ff5946bf9c
v4.7 (MD5): eb934715f441bd5ce6d747493ca91a38
I also installed v4.7 yesterday. Worked great! No issues so far
Click to expand...
Click to collapse
ya its workd....
thanx alotzzzz
ritz28 said:
First install v4.0 and then flash v4.7
To install v4,0 and then v4.7 read the opening post.
Steps:
Goto recovery
Backup the existing ROM (Just In case). Also backup the /efs folder (just in case)
wipe dalvik cache (in advanced)
wipe cache
wipe data
format /system (optional - read below)
install the superwipe
install the 4.0
wipe cache
wipe dalvik cache
reboot.. till the rom boots..
Then Flash v4.0
then turn off (no need to complete the setup procedure - you can do this after installing v4.7)
install the 4.7
instal the market zip
wipe cache
wipe dalvik cache
fix permissions
then reboot!
I usually also do a format /system to ensure a clean install. Prevents some force closes later
Please verify the md5 of the files you downloaded to ensure they are not corrupted.
v4.0 (MD5): 990bf3ddb2a3a1374995d1ff5946bf9c
v4.7 (MD5): eb934715f441bd5ce6d747493ca91a38
I also installed v4.7 yesterday. Worked great! No issues so far
Click to expand...
Click to collapse
There's nothing left to be explained ....
You covered it all.....great job:thumbup:
@op pls press thanks for the guy who helped you... it also avoids posts saying just thanks...
Peace
Sent from my Xperia Neo V using Tapatalk 2
Hello guys,
I want clean my store but not my ROM. I have Maximus custom ROM.
With TWRP shold I choose Wipe cache?
Cheers
In TWRP wipe cache, dalvik cache. It's safe.
Or, you want to format SD card?
Dears,
please suggest to me which kernal should be installed for the following.
[ROM][PORT][JB 4.2.2][iPhone iOS7 ROM for][A110][STABLE]
for CWM users:
Wipe data
Wipe cache
Wipe dalvik cache
Wipe android secure
Format system
Install ROM
Wipe cache
Wipe dalvik cache
Reboot
Thanks
Thunderzap will do the thing
Nameless​
Screenshots
How to install:
Download rom
reboot to recovery
create full backup
wipe data, cache, dalvik
flash rom
reboot to system
Download
can you make disable internal memory? thanks
please help for the GPS