Database Info

Stuck at Smart Mobility Screen!

I used the rom cooking kitchen to make some of my favorite roms even better. Basically I just deleated some of the programs I dont use and deleated some of the extra sounds. Everything went through without any problems and now after I flashed it the smart mobility screen comes up and shows the radio and other info but then freezes there. How can I fix this or go back to a different rom? HELP. Thanks again

hollywood said:
I used the rom cooking kitchen to make some of my favorite roms even better. Basically I just deleated some of the programs I dont use and deleated some of the extra sounds. Everything went through without any problems and now after I flashed it the smart mobility screen comes up and shows the radio and other info but then freezes there. How can I fix this or go back to a different rom? HELP. Thanks again
Click to expand...
Click to collapse
try and get the ship rom that came with ya phone i had the same prob with a o2 xda/mda wizard i got the rom whitch was 1.05 ok now
hope this helps

How can I install it, my usb wont connect to the device?

hollywood said:
How can I install it, my usb wont connect to the device?
Click to expand...
Click to collapse
read the hard spl manual
*MICROSD FLASHING*
***IMPORTANT***
Please make sure you have HardSPL on your device.
1. Get a 128MB MicroSD card (or whatever size you like) and format it (***please make sure you format it, but not just delete all contents on it)
2. find the ROM image you would like to use, normally namede RUU_Sign.nbh, and rename it to "KAISIMG.nbh"
3. Plug the card into the phone, then enter boot loader mode by pressing down the Power and Camera buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears. (taken from Wiki)
4. You will first see a tri-color screen then the information on the card. Press power button to start flashing.
5. After all these are done, press the reset button located at the bottom of the phone to reset the device.

Thank you very much, back to normal!

Impossible to access bootloader mode !

The problem was solved by replacing the camera button See last post
Hi,
I've a big problem : I get stuck on the first bootscreen "Smart mobility"
Impossible to enter in bootloader by press and hold the camera button end reset...
Now it's impossible to use the phone. The last thing what I do is to flash with the Pcarvalho last build but the system became very very slow
Is anybody can help me because I searched many forums but I found nothing...
Thanks in advance.
Cheers.

manu33xtro said:
Hi,
I've a big problem : I get stuck on the first bootscreen "Smart mobility"
Impossible to enter in bootloader by press and hold the camera button end reset...
Now it's impossible to use the phone. The last thing what I do is to flash with the Pcarvalho last build but the system became very very slow
Is anybody can help me because I searched many forums but I found nothing...
Thanks in advance.
Cheers.
Click to expand...
Click to collapse
have you flashed via Memory Card? if not, try it...

pcarvalho said:
have you flashed via Memory Card? if not, try it...
Click to expand...
Click to collapse
No, I try directly by USB and it works.... But the system was very slow and I decided to flash again. But no way by USB because the loading process has not been through (is stuck well before setting screen)...
So I tried by the bootloader mode : not be accessed
And for flash with SdCard you need to enter in this mode ...
Thanks for your help if you can.
For your information, I flashed a lot between your version and android, this is the first time in several years that I have this problem.
Cheers.

manu33xtro said:
No, I try directly by USB and it works.... But the system was very slow and I decided to flash again. But no way by USB because the loading process has not been through (is stuck well before setting screen)...
So I tried by the bootloader mode : not be accessed
And for flash with SdCard you need to enter in this mode ...
Thanks for your help if you can.
For your information, I flashed a lot between your version and android, this is the first time in several years that I have this problem.
Cheers.
Click to expand...
Click to collapse
Check this...
http://forum.xda-developers.com/showthread.php?t=425922

[email protected] said:
Check this...
http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
Hi,
Thanks for the link. I looked for and try but no effect... In fact my phone is blocked in the first bootscreen and can't mount usb drive I think...
The big problem is I can't access to boot mode by press and hold camera button and I don't know why
Thanks again.
Cheers

Hello, I had the same problem and I solved re-flashed the hard-spl.

adrenalynik said:
Hello, I had the same problem and I solved re-flashed the hard-spl.
Click to expand...
Click to collapse
Yeah... But how ? I can't see the phone in my PC and I can't enter in boot mode... Impossible to get WM6.5 because the boot sequence is stopped a few secondes after reset
Anyway thank you
Cheers.

manu33xtro said:
Yeah... But how ? I can't see the phone in my PC and I can't enter in boot mode... Impossible to get WM6.5 because the boot sequence is stopped a few secondes after reset
Anyway thank you
Cheers.
Click to expand...
Click to collapse
have you Hard Reseted the device?

pcarvalho said:
have you Hard Reseted the device?
Click to expand...
Click to collapse
Hi pcarvalho,
Oh yes, many times... I press and hold the camera button and reset but no effect... Impossible to see the color screen And the phone is blocked in the "smart mobility" view.
Maybe another configuration of button ??

manu33xtro said:
Hi pcarvalho,
Oh yes, many times... I press and hold the camera button and reset but no effect... Impossible to see the color screen And the phone is blocked in the "smart mobility" view.
Maybe another configuration of button ??
Click to expand...
Click to collapse
Remove the battery for 10 seconds than insert it and press camera botton and power botton.

manu33xtro said:
Hi pcarvalho,
Oh yes, many times... I press and hold the camera button and reset but no effect... Impossible to see the color screen And the phone is blocked in the "smart mobility" view.
Maybe another configuration of button ??
Click to expand...
Click to collapse
I had the same problem with my first device.....unfortunately no solution....

adrenalynik said:
Remove the battery for 10 seconds than insert it and press camera botton and power botton.
Click to expand...
Click to collapse
Alas, no effect...

kostas244 said:
I had the same problem with my first device.....unfortunately no solution....
Click to expand...
Click to collapse
****... Sorry but if it is really broken...
Are you sure ? Hope is vital
Thanks.

manu33xtro said:
****... Sorry but if it is really broken...
Are you sure ? Hope is vital
Thanks.
Click to expand...
Click to collapse
I tried almost everything....still now i can't pass the first boot screen...so...i can't go into bootloader mode or make a hard reset....too bad..

kostas244 said:
I tried almost everything....still now i can't pass the first boot screen...so...i can't go into bootloader mode or make a hard reset....too bad..
Click to expand...
Click to collapse
OK. maybe I'll find a way to fix it I hope
Thanks again for your help.
Cheers

manu33xtro said:
OK. maybe I'll find a way to fix it I hope
Thanks again for your help.
Cheers
Click to expand...
Click to collapse
If you find something usefull , pm me please.....thanks and good luck

kostas244 said:
If you find something usefull , pm me please.....thanks and good luck
Click to expand...
Click to collapse
Of course
A glimmer of hope, sometimes, when I boot my phone and press and hold camera button, and connect with USB : my PC detect it but just one time and can't mount really
And I will also inquire if there is not a solution for the dismantling and see...

Is your phone security unlocked ? If so press the power button and the green (send) button to put your phone into diag mode.You will need the motoQ drivers "just search for motoQ or diag drivers".Your screen will be black but you will be able to use mtty commands ie info 8 (check for bad blocks) cego (boot windows).
You will have to connect mtty via com port.
Be careful with mtty it can kill your device.

meknb said:
Is your phone security unlocked ? If so press the power button and the green (send) button to put your phone into diag mode.You will need the motoQ drivers "just search for motoQ or diag drivers".Your screen will be black but you will be able to use mtty commands ie info 8 (check for bad blocks) cego (boot windows).
You will have to connect mtty via com port.
Be careful with mtty it can kill your device.
Click to expand...
Click to collapse
I tested your solution but ... no way ...
I find the plan to remove and also the procedure for entering diagnostic mode but without result so (capture button plus power button : no effect).
It's incredible

This solution will only work if you have hard spl mfg installed,It could be a faulty camera button.

[Q] HTC HD2 won`t go in to bootloader mode

Dear all,
I have two big problems!
1st on is that my phone HD2 won`t start. It just freeze on the white screen with HTC logo and ROM numbers.
2nd is that when I tried to put it in bootloader mode it won`t go. I tried to press down volume key and power key but it happen`s teh same like in the 1st paragraf.
Can you maybe help me???
Thanks in advance.

take the battery out and do a hard reset. Hold volume up and down at the same time and press power button.

I also tried to do that and nothing happens! It just show`s white screen with htc logo.

My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile

rsimiao said:
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
Click to expand...
Click to collapse
Rsimiao, any luck getting your phone into bootloader mode? I have the same problem.

Have same problem
my hd2 won t go in bootlaoder mode, impossible to see spl and wont be flash by hspl 3
impossible to hard reset it
its saying that sd card fail to copy something
is there a solution ??

no usb loading in bootlaoder
Hi I have problem with loading usb in bootlaoder mode.....
When I turn on the phone everything is ok working fine
I'm trying to put a new Rom but I cant because can not find usb
can anyone help me please.....

Dont go to Bootloader (Tricolor Menu)
Hello HD2 Experts,
yesterday i wanted to reboot my HTC HD2 with Android (SD) on it, and after this it hanging on the HTC logo and cant boot.
It goes only to the MAGLDR but not to the Bootloader ( Tricolor Menu) if i press VOLUME DOWN AND POWER...
I installed via USB FLasher on MAGLDR the Windows 7 Phone and it was working perfectly without problems (Just Wlan/Wifi dont working). After this i tried to install 5 different NAND Android on my HD2 and every of this is hanging on this HTC Logo!!! I am sure that all this 5 were working before this...
My Problems:
1. Cant install (NAND) Android.
2. Cant join to the BOOTLOADER (Tricolor).
3. On WIndows 7 PHone no WLAN working.
I'm done with the nerves!!! Can anybody help me?
Best Regards, Mike

Take bettery out, then try again
it will work

i tried EVERYTHING! but it dont help
and battery too!

Having the same problem I have SPL-3.03 HSPL & trying to downgrade to SPL 1.66 but won't go into Bootloader. I've tried an 8gb, 4gb & now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen. Pressing reset button & holding end call & Vol down button.
This is the right file to rename from HTC?
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship

Make sure you are not using the USB cable while trying to enter bootloder. I had the same problem, but once unplugged the cable all was fine.

I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!

HTC HD2 won`t go in to bootloader mode
Junks666 said:
... now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen.
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Click to expand...
Click to collapse
Hi Junks,
The THREE COLOUR SCREEN is BOATLOADER this is FIRST BOOT LOADER or (I Think) the name is H-BOOT. You have to correct ROM for HTC HD2, but CMIIW the rom is for HTC HD2 T8585 (WWE) with 516 Internal Memory. Is your HD2 this Model or another Model famous with name TMOUS (T-Mobile Edition) with 1024 Internal Memory. I believed if you still have tricolor screen easier to "wake up" your phone.

Im haveing the same problems please someone help... a Demonoid invite code is all I have to offer here

DJ Legless said:
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
Click to expand...
Click to collapse
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up

x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!

kris29440 said:
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
Click to expand...
Click to collapse
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"

x1123 said:
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
Click to expand...
Click to collapse
I usely use SD Builds, but I installed DFT_LEO_MAGLDR113_DAF,HSPL4,MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M,NexusHD2-Gingerbread_V2.7_NAND__Android-2.3.4__update and wifi-calling-htcleo-gb-20110518 ( Yes I just copy and paste the file names lol) My phone was working fine (Not sure about the bootloader/Tri-color screen) untill a few days ago my android build boots in safe mode I did find a remedy for that and thats by pressing and holding the Call (green), Home and Windows keys down while the android boots, but I have to do that all the time now. What I am trying to do is restore it back to fatory settings. Oh yeah BTW the AMAGLDR bootloader dose boot and also CWM Recovery but while In the aMAGLDR I have to hold the back key to press vol. up and down other wise it will keep moveing back to the top of the list (Its been like that sence I installed MAGLDR) but I do not have any problems with the vol up and down key in any other programs. I am also able to use USB Flasher and any other mode besides Windows Mobile Device Center (Windows 7). I also tried gettng into Sync by installing Windows phone 7 (witch installed fine with USB flash (Useing MAGLDR) but not luck with syncing back to WM6.

x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
Hi. I've tried that combination of keys & I just get the O2 Welcome screen. The only key combination that works is when I power up with the Vol Down key held. I then get the tri-colour screen.
Don't know if this helps but.....
When I get the tri-colour screen, I have the following text:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0X05
CotullaHSPL 0x40

[Q] LG P920 3D briked!!!...HELP please...

help me please. I rooted my P920 with oneclick root and everithing was ok. than I installed the r2 patch from this site ,to improve performance,with cwm recovery and it was ok. than after a restart, I flashed another patch r1 I think, to use ext3 partition. after the zip installation the phone is turn off by it self and now it's dead. if I push power and volume up for 10 second my pc plug and unplug it in loop. what can i do? I made a backup befpre the crash but now i cant do nothing with my phone.....please help me
UPDATE 13 oct 2011.
the phone is still in lg hands...nobody knows anything about when and if it will come back
incredible...

cool down
it's really hard to brick a phone...
read the guide for flashing via pc and it will work again.
i'm not shure but think the o3d has also a downloadmode (volume down+power)
if the downloadmode also doesn't work it's really ****ed up
but as i said i'm not shure if there is a downloadmode...
edit: ok sorry... at the moment there is no way to update the phone via pc without a running os. sorry but you'll have to w8 till there is a way. (like odin from samsung)
edit2: found a solution!
but it's in german...
http://www.android-hilfe.de/anleitu...23075-how-lg-3d-notfallwiederherstellung.html
you can translater it via google and if you don't understand everthing i can help you ->austira

Flash KDZ or use LG's recovery to go back to normal. Boot it up on download mode for this.
This is what happens when you start flashing crap from 2X.
Probably since partitions are different, you've just formatted what you shouldn't have.

tnk everybody but it don't go in download mode! or maybe i wrong something....how should i try to go in download mode? with key combination it don go! please help

Try this:
1. Remove battery
2. Press volume up
3. While it is pressed, insert the usb cable
Should enter download mode I think.
If it doesn't, try the same thing but with volume down.
Afterwards, you can let go of the key, and go to LG mobile tools and on the menu click recovery. It'll ask for your IMEI, put it there and press ok. Wait for the process to finish.

but...KDZ is a us odin is for samsung? this is the first lg i have...maybe the last too

I try but after i inpout emai and product code, the download never start and a error messege appear

Try to flash a KDZ then.

how to flash a KDZ? what sw do I need?

I've try to flash a kdz but the problem is the same than before. the pc don't see the phone. I've try without battery pushing vol up and plug usb but it begin to feel the phone andg give error message sound continuosly like a loop. if i look the hardware in PC proprity it appear snd disappear with the sound tha i told before. it is like if I plug the phone 1 time for second...the pc reveak and reject it...I'm in a **** situation

Did you install the drivers?

yes of course..as I wrote on first message I've had allready root the phone with oneclick when everything happened...so the pc was allready pared with the phone...I really don't know what to do! that's a bad day for me

Non abbandonatemi vi prego

lilatommy said:
Non abbandonatemi vi prego
Click to expand...
Click to collapse
Spero che tu sia piu fortunato di me... ti spiego in inglese se no mi cazziano.
Connect usb cable, the telephone start automatically.
Press and hold power button to shutdown the telephone (ca 5 seconds)
Press Power button and volume up (hold the key for 10 seconds).
You can hear the usb sound from your operating system.
Repress power and volume up for another 10 sec.
You can hear usb sound, don't remove finger from two buttons, waiting another sound.
Now you can use lg software to try to restore the original firmware.
The problem for my telephone is the "upgrading firmware" page don't start... any time I power up the telephone I see the upgrading firmware page but the progress bar don't move.
I hope you have more lucky
(sorry for my bad english)

This is a little guide on optimus 3d, for reset to factory settings
Get updater if you don't have go here http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
After the installation start the updater and follow these steps.
1 Install the correct drivers
2 select the top right option and select your model phone from list “LGP920”
3 after the drivers are installed extract the battery and shut-down, then while holding volumUp button insert the usb cable in to pc.
4 Once your pc finds the phone let it install the drivers
5 Once done your phone will display “S/W Upgrade”.
6 now in the updater go to >support go to >select disaster recovery.
7 before recovery starts enter imei and serial number of the phone.
Wait until the process finishes and everything is completed, remove the usb cable insert the battery and start normally.
Hope this helps.

ok but it don't start and don't power off...it's dead. the battery icon never come!

Try having a read through this thread to see if any of the advice there might help,
http://forum.xda-developers.com/showthread.php?t=1174842
I faced a similarish problem, though a little different to what you describe. I wasn't quite able to get my phone working again, and the store I bought it from are exchanging for a replacement, but perhaps something in there can help you out.

lilatommy said:
ok but it don't start and don't power off...it's dead. the battery icon never come!
Click to expand...
Click to collapse
I was in the exactly same situation but I managed to recover the phone. Check this post.

m33ts4k0z said:
I was in the exactly same situation but I managed to recover the phone. Check this post.
Click to expand...
Click to collapse
ok I will try this way. Hope to be lucky this time

No way! Nothing to do it is dead. I have only one possibility. Official customer support now it is better pay something than loose everything. Thank everybody help me. I ll update when device will back. Sorry for my bad and approximately English
Sent from my GT-I5500 using XDA Premium App

[Q] can i unbrick my phone ?

Hi everyone,
i have a Haipai X720D, and after few errors i've make, i decided to reinstall it
i have download an flash it with http://forum.xda-developers.com/showpost.php?p=36025676&postcount=4
but my phone won't boot anymore, and i cannot connect it to the computeur
i think i've heard a method like pushing the volume+ button while power it on but i can't find it...
any help would be appreciate

up

- If you hold down HOME button + POWER button + volume UP button you will get into Recovery Mode.
- If you hold down HOME button + POWER button + volume DOWN button you will get into Download Mode.
If you want to flash a customROM go into Recovery mode, there you can find something like MOUNT USB or MOUNT SD. If you do that you will be able to connect to your computer.
When you're connected you can kopie your custom ROM .ZIP file into your Internal SD card after downloading it. If you did that you go back to Recovery Mode. There you can choose instal ZIP from SD card. Instal your previous downloaded .ZIP file from your customROM and there ya go.

Thanks for the help i will try tonight.
but home button is sensitive, it's not a physical button, i hope it will work !

hi,
whatever i try, my phone is'nt detected ....
i heard about a solution, by removing the screw, see :
http://forum.xda-developers.com/showpost.php?p=37014952&postcount=6
can someone explain me the secondn sentence
"2 - with a piece of wire to ground the point KCOLD connecting to a screw of the case"
thanks for the help

Nitrogin said:
hi,
whatever i try, my phone is'nt detected ....
i heard about a solution, by removing the screw, see :
http://forum.xda-developers.com/showpost.php?p=37014952&postcount=6
can someone explain me the secondn sentence
"2 - with a piece of wire to ground the point KCOLD connecting to a screw of the case"
thanks for the help
Click to expand...
Click to collapse
hello
can you tell me where is the point KCOLD? i have the same problem on my X720D.:highfive: