Related
Possibly the fastest phone brick in history... I did everything wrong...
AT&T Tilt, Windows Vista host machine
I ran the SSPL, NOT the Hard-SPL...
16% thru it failed
Rebooted, tri color screen, but not the same extact screen I had seen after running the SSPL on my Tilt.
Hard Reset, said yes take me to factory settings, back to same tricolor screen
Plugged it into a XP box, drivers installed, plugged in USB (it shows USB connection on the screen) Activesync of course wont go green
Loaded both the Kraiser rom and the Cingular rom, both fail at 1% and reboot the device and same invalid device ID..
Any ideas, aside from I'm a r-tard?
I ran the Hard-SPL on my HTC and it worked as it should. I'd say give that a shot, THEN try flashing the ROM of your choice.
-Mc
Problem is, when I run hard spl it expects activesync to be running, but in bootloader mode AS doesnt connect so Hardspl wont load =/
- Disable activesync usb connections
- Connect to bootloader with mtty and type the following commands to know your CID and Model ID:
Code:
Cmd>task 32
Cmd>info 2
Cmd>getdevinfo
Paste the output here, and also tell me which SPL version you have on your device.
Also, does the tri-color shows "RUURUN" or similar in the screen?
You should flash a ROM matching your CID to fix it.
Cmd>task 32
No card inserted
Level = FF
Cmd>info 2
HTCSCWS__001Ùü¤HHTCE
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSKAIS1*00CS_0HTCE
Cmd>
Device screen says
RUUNBH
KAIS1*0
SPL-1.56.0000
CPLD-8
Flash this ROM, should bring it back to life.
I'm leeching it now, 40% done, also FYI, I've posted on the Official ROM forum new links to most utilities and ROMs hosted on my servers off the rapidshare, to share free of charge.
Ahh, life saver =) Thanks, I'll be sure to add that rom to my list of full Kraiser roms on my web server, now to correctly flash it back with the HTC rom.
Thanks!
Same problem as TS. Bigger problem ... does anyone have the Dutch ROM?
Tnx!
I got the same problem as Palmore. After 16%, stuck, then bricked. I am downloading the ROM pointed by POF (thanks man!!) hopefully will unbrick it. Now, how do we get the HTC Kaiser ROM on this thing? Anyone?
It's on my phone. Tell me how do dump it and I ll send it to you.
Wouter
Lukstra said:
Same problem as TS. Bigger problem ... does anyone have the Dutch ROM?
Tnx!
Click to expand...
Click to collapse
ludovich said:
I got the same problem as Palmore. After 16%, stuck, then bricked. I am downloading the ROM pointed by POF (thanks man!!) hopefully will unbrick it. Now, how do we get the HTC Kaiser ROM on this thing? Anyone?
Click to expand...
Click to collapse
Run the Hard-SPL utility on your PC, and follow the instructions (sticky on this forum)
It will allow you to flash any ROM after that, I've flashed the AT&T Rom, the HTC rom and back and forth, pulling cabs out of the AT&T rom for the items I like (IM utility etc)
Palmore said:
Possibly the fastest phone brick in history... I did everything wrong...
AT&T Tilt, Windows Vista host machine
I ran the SSPL, NOT the Hard-SPL...
16% thru it failed
Rebooted, tri color screen, but not the same extact screen I had seen after running the SSPL on my Tilt.
Hard Reset, said yes take me to factory settings, back to same tricolor screen
Plugged it into a XP box, drivers installed, plugged in USB (it shows USB connection on the screen) Activesync of course wont go green
Loaded both the Kraiser rom and the Cingular rom, both fail at 1% and reboot the device and same invalid device ID..
Any ideas, aside from I'm a r-tard?
Click to expand...
Click to collapse
If you are a r-tard, it must be catching - same situation here at 16% and 1% now......
andydempsey said:
If you are a r-tard, it must be catching - same situation here at 16% and 1% now......
Click to expand...
Click to collapse
LIFE SAFVER
nispen said:
It's on my phone. Tell me how do dump it and I ll send it to you.
Wouter
Click to expand...
Click to collapse
Hi Wouter,
I bought a new Kaiser today (yes now I have two of them ).
I will see if I can dump the Dutch ROM myself and see what happens next.
Thanks for your help anywhy!
- Lucas
Bricked
Ok, so here is my situation. I have a Tilt and Vista.
I ran HardSPL and I am at the tri-color screen. I have:
KAIS1*0
SPL-1.JumpSPL
CPLD-8
USB (in the middle of the screen)
I tried disconnecting and reconnecting it several times. I cant get HardSPL to run again (it hangs at the first section looking for ActiveSync) I tried restarting Vista several times. I can NOT turn off my device, as holding down the power button does not appear to work.
I have tried just running a couple of .exe roms (AKU 0.7.0 ROMS) and I get the connection error [264]. I cant re-establish my ActiveSync connection. In device Manager I have Microsoft USB Sync for the mobile device, but I cant get ActiveSync (Mobility Center) to see it.
I have tried opening MTTY to run "boot" but it says USB Port Can NOT be opened.
I just need some direction here, as it seems like everything hinges on my ActiveSync connection. I have been up and down the Wikis for Hermes and all the similar ones, and I think I am SOL.
I WILL GLADLY DONATE if thats what it takes for someone to help me. Thanks guys, I cant wait for my HTC Rom to work.
Vista Problem.
First off, i had the same problem as you so i just found an XP box to use.
Second, even with XP i still managed to **** up because i did not read the directions all the way through. This device is totally different so make sure you read all the directions.
If you have no access to an XP machine then u can just "obtain" a copy of XP and dual boot just for flashing your device.
If you have no idea what I am saying then read some more. the hermes forums have some great information when it comes to flashing via Vista.
For all you guys that just saved between $300.00-$500.00. How about sending POF like %5 or %10 of what he just saved you...
I'm just sayin'
Later, Lew
Have you installed the XP activesync drivers under Vista? The Hermes Wiki mentions somewhere how to do that.
Jabbs19 said:
Ok, so here is my situation. I have a Tilt and Vista.
I ran HardSPL and I am at the tri-color screen. I have:
KAIS1*0
SPL-1.JumpSPL
CPLD-8
USB (in the middle of the screen)
I tried disconnecting and reconnecting it several times. I cant get HardSPL to run again (it hangs at the first section looking for ActiveSync) I tried restarting Vista several times. I can NOT turn off my device, as holding down the power button does not appear to work.
I have tried just running a couple of .exe roms (AKU 0.7.0 ROMS) and I get the connection error [264]. I cant re-establish my ActiveSync connection. In device Manager I have Microsoft USB Sync for the mobile device, but I cant get ActiveSync (Mobility Center) to see it.
I have tried opening MTTY to run "boot" but it says USB Port Can NOT be opened.
I just need some direction here, as it seems like everything hinges on my ActiveSync connection. I have been up and down the Wikis for Hermes and all the similar ones, and I think I am SOL.
I WILL GLADLY DONATE if thats what it takes for someone to help me. Thanks guys, I cant wait for my HTC Rom to work.
Click to expand...
Click to collapse
Best Forum Ever
I
I got it working. I had to pull the battery out of the phone to get it out of bootloadr, it was just plain stuck. Then, in Vista, I needed to F8, disable driver enforcement, I replaced the wceusbh.inf in device manager, and relaunched HardSPL and there she was! Now for the BigStorage.
Thanks to all that helped, I will be donating pof for sure
Hey guys, I am trying to flash Dutty's newest rom, but im having some trouble...
When I double click the RUU.exe file, I put a check in the checkbox, hit continue. then put another check, hit continue, then I get an error saying:
"Error [200]: Invalid update tool"
"Please get newer update utility"
This is odd because I read on the Wikki that you get this error if you don't have HardSPL, but I do. In fact, I have flashed at least 4 or 5 different roms on this phone. Another thing is that my phone isnt in activesync mode, and for some reason when I try to install activesync (directly from microsoft's website and from the CD that came with my tilt) I get an error saying that it wont install... And another weird thing is that this never stopped it before, I have flashed a rom without it being in activesync with the computer...
When I tried to install Microsoft's activesync directly from their website, I double click the setup.msi file, and then it says :
"preparing installation..."
"The wizard was interrupted before Microsoft ActiveSync 4.5 could be completely installed.
Your system has not been modified. To complete installation at another time, please run setup again.
Click Finish to exit the wizard"
And this happens every time I try it... I have tried redownloading the file and I get the same issue... I even checked to see if maybe I downloaded the wrong version (like the vista version or something) but I downloaded the correct one.
Now, when I try to install activesync from the CD that came with my Tilt, I get an error saying that I need to update my Adobe Flash Player, So i click on the link that it gives me, and I updated it. Even though it is currently up to date, I STILL get this error every time I try, even after restarting my computer.
Any ideas?
put the phone in bootloader and tell me exactly what it says there.
jjb007 said:
Hey guys, I am trying to flash Dutty's newest rom, but im having some trouble...
When I double click the RUU.exe file, I put a check in the checkbox, hit continue. then put another check, hit continue, then I get an error saying:
"Error [200]: Invalid update tool"
"Please get newer update utility"
This is odd because I read on the Wikki that you get this error if you don't have HardSPL, but I do. In fact, I have flashed at least 4 or 5 different roms on this phone. Another thing is that my phone isnt in activesync mode, and for some reason when I try to install activesync (directly from microsoft's website and from the CD that came with my tilt) I get an error saying that it wont install... And another weird thing is that this never stopped it before, I have flashed a rom without it being in activesync with the computer...
When I tried to install Microsoft's activesync directly from their website, I double click the setup.msi file, and then it says :
"preparing installation..."
"The wizard was interrupted before Microsoft ActiveSync 4.5 could be completely installed.
Your system has not been modified. To complete installation at another time, please run setup again.
Click Finish to exit the wizard"
And this happens every time I try it... I have tried redownloading the file and I get the same issue... I even checked to see if maybe I downloaded the wrong version (like the vista version or something) but I downloaded the correct one.
Now, when I try to install activesync from the CD that came with my Tilt, I get an error saying that I need to update my Adobe Flash Player, So i click on the link that it gives me, and I updated it. Even though it is currently up to date, I STILL get this error every time I try, even after restarting my computer.
Any ideas?
Click to expand...
Click to collapse
I can't help with the active sync problem (you don't have vista, do you?) but as for flashing...flash from the sd card http://forum.xda-developers.com/showthread.php?t=336158
P1Tater said:
put the phone in bootloader and tell me exactly what it says there.
Click to expand...
Click to collapse
excuse my noobness , but im not sure what that means
jjb007 said:
excuse my noobness , but im not sure what that means
Click to expand...
Click to collapse
OK, with the phone powered on, press and hold the camera button and insert the stylus in the reset hole until the tri-colored screen comes up. This is bootloader. Tell me what it says there, exactly.
jjb007 said:
excuse my noobness , but im not sure what that means
Click to expand...
Click to collapse
After you put your phone in bootloader mode as P1 said, you will see something like this:
KAIS1*0
SPL-1.93.0000
CPLD-8
Once you make a record of what is displayed, reply back with it.
ok, this is what it says (in the top red box):
KAIS1* MFG
SPL-1.0.OliPof
CPLD-8
Then in the white box it says: "Serial"
jjb007 said:
ok, this is what it says (in the top red box):
KAIS1* MFG
SPL-1.0.OliPof
CPLD-8
Then in the white box it says: "Serial"
Click to expand...
Click to collapse
Since you already have it in the boot loader just keep it there and try to flash it, see if you get any errors that way.
What version of Windows is on your computer?
If your running vista you need the mobile device center, not activesync.
Im using windows XP, I will try flashing while it is in bootloader, I edit my post once I see if it is successful or not.
**It did not work when I tried flashing from the bootloader screen, I got the same error
which rom are you flashing your device with?
I am trying to flash Dutty's newest ROM, and right now Dutty's 3rd or 4th newest one is on my phone.
after you put your device in bootloader, and connected it to the pc, did the word "serial" change to "usb"? and were drivers loaded for the device? there should be a htc usb sync or microsoft usb sync in your device manager
XtreMe_G said:
after you put your device in bootloader, and connected it to the pc, did the word "serial" change to "usb"? and were drivers loaded for the device? there should be a htc usb sync or microsoft usb sync in your device manager
Click to expand...
Click to collapse
Yea, I dont see either of those in my device manager...
Sounds like you're missing the drivers. Need to roll 'em back to the XP drivers.
GSLEON3 said:
Sounds like you're missing the drivers. Need to roll 'em back to the XP drivers.
Click to expand...
Click to collapse
Alrighty... so how do I go about doing that?
jjb007 said:
Alrighty... so how do I go about doing that?
Click to expand...
Click to collapse
You use google or XDA search via google. Try ROM flashing with Vista, etc...
Remember, there is a lot of valid data in Hermes forum as well
jjb, I had the same problem the other night on my home computer with XP. Luckily, I did not have the same problem with my work computer, also with xp. Something happended on the home computer to fcuk up the drivers (i'm guessing, as GSLEON pointed out). I had the same install issues with Activestinc. I had these issues in the past (at least 6 months ago) and was able to finally get Activestinc installed after rebooting multiple times. This time I only tried once before I waited to go back to the office and flash. I'm not sure what to do to rebuild(?) the drivers, but you might try a different computer. Also, my google search (for the 200 error) the other night pulled up a different web site that listed a lot of error codes and what they mean. I'm gonna try and figure out my driver issues with activstinc this weekend and I will post if successful.
ptgptg said:
jjb, I had the same problem the other night on my home computer with XP. Luckily, I did not have the same problem with my work computer, also with xp. Something happended on the home computer to fcuk up the drivers (i'm guessing, as GSLEON pointed out). I had the same install issues with Activestinc. I had these issues in the past (at least 6 months ago) and was able to finally get Activestinc installed after rebooting multiple times. This time I only tried once before I waited to go back to the office and flash. I'm not sure what to do to rebuild(?) the drivers, but you might try a different computer. Also, my google search (for the 200 error) the other night pulled up a different web site that listed a lot of error codes and what they mean. I'm gonna try and figure out my driver issues with activstinc this weekend and I will post if successful.
Click to expand...
Click to collapse
Thanks for the input... im going to try re-installing windows when I get the chance and hopefully that will clear up this driver issue.
rather than going through all the trouble trying to solve this problem, i would just flash using the microsd card
Hello,
Today i bought the kaiser and wanted to rom flash it to 6.1
My plan is to flash it to L26KDTLB6 (http://forum.xda-developers.com/showthread.php?p=2574491&posted=1#post2574491) i've followed the instructions here : http://forum.xda-developers.com/showpost.php?p=2261226&postcount=2
and the flash was in progress but cancelled after 14% due to communication problems (????)... now when i resettred my kaiser i see this weird red green blue and white screen.
I am terribly worried i might have ruined my kaiser even before really using it.
I am begging you for help.. i would appreciate any kind of help from you guys.
Thank you so much
MIke.
Wow! Sounds like you are in deep doodoo. I had almost an identical problem last night trying to flash ROMeOS 4.7. I went and read the stickies at the top of this forum and was back up running in no time.
loserp3 said:
Hello,
Today i bought the kaiser and wanted to rom flash it to 6.1
My plan is to flash it to L26KDTLB6 (http://forum.xda-developers.com/showthread.php?p=2574491&posted=1#post2574491) i've followed the instructions here : http://forum.xda-developers.com/showpost.php?p=2261226&postcount=2
and the flash was in progress but cancelled after 14% due to communication problems (????)... now when i resettred my kaiser i see this weird red green blue and white screen.
I am terribly worried i might have ruined my kaiser even before really using it.
I am begging you for help.. i would appreciate any kind of help from you guys.
Thank you so much
MIke.
Click to expand...
Click to collapse
Sounds like you did not HardSPL. The tri color screen you are seeing is called bootloader. It's not as scary as it might seem at first. When you connect yoru device to your computer does it still show the letters "USB" at the bottom? If so, try flashing the stock rom for your device and see if that will fix your problem. After that be sure to make sure you've properly hardspl'd your device before flashing anything else.
loserp3 said:
... i see this weird red green blue and white screen...
MIke.
Click to expand...
Click to collapse
HOW COME YOU KNOW HOW TO WRITE BUT YOU CAN'T READ?
geez...
I had the same problem once. I remember I solved it that I first flashed it back to the OEM that came with it, and then flashed it again. It worked. Hard SPL and CID unlocker helped being that the phone was locked.
If you dont have OEM OS you can always find one here, just use the Search button.
Secondly, you have to follow the steps exactly as instructed because those are the only way to successful flashing. Are you sure that you didnt overlook one of the steps?
Pay special attentiton to the 2nd Q&A and also other Q&A being that there are all the answers.
Happy flashing mate.
Hello all,
I was able to revert back to hTC'S 6.1 rom...So everything was back to normal.
The thing is, i really want to make the kaiser look good with the d3d driver and the touchflo 3d, I'll give the http://forum.xda-developers.com/show...=1#post2574491 rom one more shot this time ill use
SSPL-KAIS.exe (is that ok ?? will that prep my device for rom flashing ??? )
is there another cooked rom that has the touch flo 3d and the d3d drivers ???
appreciate your help
MIke.
loserp3 said:
Hello all,
I was able to revert back to hTC'S 6.1 rom...So everything was back to normal.
The thing is, i really want to make the kaiser look good with the d3d driver and the touchflo 3d, I'll give the http://forum.xda-developers.com/show...=1#post2574491 rom one more shot this time ill use
SSPL-KAIS.exe (is that ok ?? will that prep my device for rom flashing ??? )
is there another cooked rom that has the touch flo 3d and the d3d drivers ???
appreciate your help
MIke.
Click to expand...
Click to collapse
Do NOT flash another rom until you have hard spl'd your device. Make sure you check out the thread at the top of this forum, which you already sited once. You should also consider sim/security unlocking your device as well. You can ONLY use jumpspl to put hardspl on your device. Absolutely do not start flashing roms until you can enter bootloader and next to spl: see "hard spl" somewhere in the title.
Hi
Ok, here's what i've done to prepare the device
1) i ran kaiser-HardSPL.exe and loaded the nbh that came with it
2) I copied SSPL-KAIS.exe to the kaiser and ran it
thats it... i didn't however see hard spl in the title.. i did see JUMPspl though
loserp3 said:
Hi
Ok, here's what i've done to prepare the device
1) i ran kaiser-HardSPL.exe and loaded the nbh that came with it
2) I copied SSPL-KAIS.exe to the kaiser and ran it
thats it... i didn't however see hard spl in the title.. i did see JUMPspl though
Click to expand...
Click to collapse
you are so making this too hard on yourself. Follow these directions to the letter and you'll be fine:
How to Install 3.2x.Hard SPL:
1. Plug the device into your PC
2. Copy Jump/Soft to your device. use JumpSPL If you have the "White Screen" issue, if you don't, you can use SSPL-KAIS.exe.
3. Take out your SD card & SIM Card.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe and flash the SPL
If you have problems with the above process, try this:
1a. download the attached files
1b. pull out the battery and reinsert it (this step *is* important)
1c. connect your PC to phone with a USB cable
2. REMOVE SIM and SD CARDS !!
3. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe
4. after a few seconds "USB" appears on the phone display
5. unplug and replug the usb cable
6. deselect "Allow USB connections" in Activesync connection settings
7. now flash hardSPL (run KaiserCustomRUU.exe from flash-hardSPL.zip on your PC)
Notes:
With the JumpSPL you should *not* flash radio roms, OS roms or full roms. The JumpSPL is only needed to flash a HardSPL (or SPL)
the link to the thread in which this came from is here:
http://forum.xda-developers.com/showthread.php?t=396922
Having just redone this this morning to revert back to 3.29, I can confirm that it works.
In the future, please don't start a thread for this type of porblem. We all starte out by reading. I've been a part of this forum for 3 years and learned all I have from just reading and asking questions that could not otherwise be answered.
loserp3 said:
Hi
Ok, here's what i've done to prepare the device
1) i ran kaiser-HardSPL.exe and loaded the nbh that came with it
2) I copied SSPL-KAIS.exe to the kaiser and ran it
thats it... i didn't however see hard spl in the title.. i did see JUMPspl though
Click to expand...
Click to collapse
you did not read the instructions correctly. Try reading them again.
It says:
How to Install 3.2x.Hard SPL:
1. Plug the device into your PC
2. Copy Jump/Soft to your device. use JumpSPL If you have the "White Screen" issue, if you don't, you can use SSPL-KAIS.exe.
3. Take out your SD card & SIM Card.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe and flash the SPL
You are stopping at step 5. Perform steps 6, 7, & 8. After that time you can soft reset the device while holding down the camera button (that will take you to the tri colored bootloader screen) and it will say "hardspl" if you have done it correctly.
If you don't read more closely you WILL break your phone and nobody here will be able to help you. These procedures are easy enough to follow if you take your time and read. I only say this to save you a great deal of frustration when your phone dies later.
Also, remember in the future that all the information you are seeking is readily available if you look for it. Dont' expect someone to GIVE you the answer, and please please please....post your questions in a thread that is already around rather than starting a new one!
@ Scothua
like the way you think . . .
scotchua,
Thank you for your assistance. i've finally upgraded my rom.
thank you all.
I have an ex-Vodafone, sim unlocked HTC touch diamond and it won't turn on. All I can do is bring it into the tri-colour screen/bootloader. When plugged into my computer the phone screen goes from serial to usb, but thats as far as it gets. Communication with activesync is no longer possible. I have no idea what to try now, I've gone as far as my non-technical mind will go ! help
I'm in the UK. Phone info;
Duttys V2.7 RC2 WWE - 27/10/08
Radio 1.08.25.08
P3700
Bootloader screen reads;
DIAM 100 MFG 64M
SPL 1.40 Olinex
MicroP- Diam (LED) v11
PSOC - Diam STAGE_PVT v0x30
Welcome to forums
Please have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
You´ll find all needed to do a succesfull reflash.
Good luck,
no comms with activesync
thanks for the link. have read the info on flashing my device but my phone no longer communicates with activesync. Is it bricked ? Phone won't go beyond initial 'vodafone' startup screen. i don't know what to do now.
which os in computer do you use ??? if in tri-color boot loader, pc only recognized the HTC driver device, but Activesync won't show the connect. You understand what i mean? Go Flash yourself your device with successfully, I will pretty sure that your device doesn't brick.
yes correct you can run the RUU wrapper while the phone is in the boot loader and itll still flash the rom
i use windows xp home sp2, i don't understand the flash process and can't get further than the tri-colour screen. I think i need a very simple step by step walkthrough if I'm to get any further !
ok
down load the rom of your choice and exract it
in the folder there should be a file called ruu_signed.nbh and a exe file called RUU wrapper or something like that if it doesnt come with the RUU wrapper it should be able to be downloaded from a stickied thread at the top of the diamond rom forum
then u need to connect ur phone to the pc while its in the boot screen the click on the ruu wrapper in the file on the pc and it should install on ur phone
hi, i downloaded the ruu, then connect my phone in boot screen, start the install, it asks me to make an activesync connection. activesync no longer finds my phone so no connection is made. i got this close, what now ? thanks for the help !
Done it finally
after many dime bar moments and weeks of annoyance the touch diamond finally came back to life. expecting this phone to actually work as advertised turned out to be a bridge too far. cheers for the help.
Attached you find all you need to flash cooked ROMs on your Dash3G (Maple).
The sspl/hardspl are confirmed to work fine on the HTC Maple platform (Dash3G, SNAP S520, SNAP S521). Any phone that says MAPL1XX under the battery should work just fine with the sspl and hardspl. This has been tested by oOkBa yesterday night. His cooked roms flash extremely fast and he noticed no problems except for the splash screens. Apparently HTC changed the format slightly. Should be easy to tackle and has nothing to do with the sspl/hardspl.
Now for the bad news ... It will not work on the HTC Cedar platform (GSM/CDMA, HTC Ozone XV6175, Verizon). Running the sspl on an Ozone will definitely brick it. Also the HTC Willow platform (SNAP S511, Sprint) is not supported. Please see this post for more info and how you can help.
There are 2 packages both contain a SSPL, HardSPL, patched ROM updater and the original Maple SPL. The first package is based on SPL 1.17 (tested by oOkBa) and the second is based on SPL 1.19 (tested by Gawain1986)
Instructions:
1. remove SD and SIM cards (don't forget otherwise the sspl is likely not to work!!)
2. connect your device to your pc with a USB cable and wait until it is synced
3. extract the file "Dash3G HardSPL by JockyW.zip" and execute "auto.bat"
4. follow all instructions given on screen: first the sspl is copied to the device and executed. You must confirm running JumpSPL on the device: first time you must click Yes to allow it to run, you also must click the trackball to continue execution of JumpSPL. The device display will turn dark and after that the romupdate tool will install the hardspl on your device. (the identification string in the tri-color bootloader screen is "1.17.hard")
5. if you have difficulties to install 1.17 then try 1.19
6. to test the sspl and the hardspl you can flash the attached splash.nbh
Once the HardSPL is installed on your device you can flash any Maple cooked or original ROM.
Have fun,
JockyW
Excellent work!! JockyW is the man! Please donate to a great cause! This now opens the door to amazing possibilities! Thank you thank you!!
ookba said:
Excellent work!! JockyW is the man! Please donate to a great cause! This now opens the door to amazing possibilities! Thank you thank you!!
Click to expand...
Click to collapse
couldnt of said it better myself..
oo..
my Snap 526 is MAPL110..
should i gib it a shot?
but i need a plan b in case something goes wrong.. any idea how to hard reset the snap with the scrollball?
I have the same mapple, ithink it's ok.
before running this file, do we have to dump the rom? and do we have to use the spl backup kit berfore?
(sorry for all these questions)
First of all, there's really no need to run this yet until there are custom ROMS to flash. If you want to simply test or prep, go for it. I can confirm it works in a MAPL100 so I don't see why any other device with MAPL1XX should be an issue. I will build some factory ROMS as well as some custom cooks in the next days for you guys to play with and test.
see i dont think alot of the new people understand the process.
the spl does nothing more than ENABLE ur device for a rom, thats it!
nothing fantastic, its not a completely diff o.s. on ur device..just preps it for whats to come.
what happend with my device today was a fluke!
i was testing and working at the same time..i could have missed a step, one of my work programs on my laptop could have set something off..i dunno.
Bricking usually isnt a part of getting a SPL for a device..just ALOT of testing. SO now is the another part of the process..the waiting process. Waiting for a rom cooker to successfully establish something, test it, and release it.
in this game..u need patience.
So I;ve been trying this and it seems something is going wrong...
Ik run auto.bat, JumpSPL gets copied and started, the device screen goes black, and when I reconnect the USB cable to get the "Smartphone Sync" driver working, my Windows 7 install tells me that there is something wrong with the USB device.
It will then refuse to use any driver I try to add to the device.
Any thoughts?
PS. It's a SNAP S521 (MAPL110)
EDIT: Windows XP x64 has the same problem.
Gawain1986 said:
Ik run auto.bat, JumpSPL gets copied and started, the device screen goes black, and when I reconnect the USB cable to get the "Smartphone Sync" driver working, my Windows 7 install tells me that there is something wrong with the USB device.
Click to expand...
Click to collapse
First, this has not yet been tested on Win7. Second, it should not be necessary to unplug and replug the cable. Try again and just wait a minute or so to allow Win7 to install the driver. Other thing you can do to make sure the driver is already installed is to put the phone in bootloader mode and connect it by usb cable.
ps: it is normal the display turns dark after running the sspl
ok, i understand there are 3 steps. but I would like to know how to do the first one:
dumping my rom.
First I entered the bootload by holding the volume down button and turning the device on...
It said:
Code:
MAPL110
SPL-1.19.0000
MicroP-Maple (LED) v6
ENGID 0x2
PCBID 0x80
PanelInfo 15-0x2
I connected it to the computer and it recognised the Qualcomm phone immediately and settled on the HTC USB Sync driver.
Then I restarted the phone and connected it again, ran auto.bat... it ran SSPL again and I waited.
So after I tried waiting for 5 minutes, WIndows 7 did not see a new device, it stayed with it's normal RNDIS driver.
So I took the plunge and ran the RUU, which told me it could not connect to the phone.
I unplugged the phone and replugged it and it said there was an error regarding the USB device.
Can it be that because my SPL version is higher than the HardSPL or SSPL, that it's getting into conflict with itself?
Hi,
First thanx for your hard working.
I got some trouble when trying to install the Hard SPL.
My SNAP from france, S521 Mapl100 under the Battery; Just HTC no operator
I launched the auto.bat
The device display turned dark and tri-color bootloader screen said "1.19.hard
The flashing process start and stuck at 0%
Unplugged the USB and the phone restart well.
Is this Hard SPL
Enter bootloader. If you see "1.17.Hard" the HardSPL is succesfully installed and you can flash any cooked and official roms in the near future.
Fabtwone said:
Hi,
First thanx for your hard working.
I got some trouble when trying to install the Hard SPL.
My SNAP from france, S521 Mapl100 under the Battery; Just HTC no operator
I launched the auto.bat
The device display turned dark and tri-color bootloader screen said "1.19.hard
The flashing process start and stuck at 0%
Unplugged the USB and the phone restart well.
Is this Hard SPL
Click to expand...
Click to collapse
Gawain1986 said:
Can it be that because my SPL version is higher than the HardSPL or SSPL, that it's getting into conflict with itself?
Click to expand...
Click to collapse
Please first try it on WinXP before we draw wrong conclusions.
Good work jocky - nice to see you about again
Thread Stuck.
Dave
jockyw2001 said:
Please first try it on WinXP before we draw wrong conclusions.
Click to expand...
Click to collapse
Did that immediately after I posted... it just keeps telling me the USB device is "malfunctioning" somehow...
Gawain1986 said:
Did that immediately after I posted... it just keeps telling me the USB device is "malfunctioning" somehow...
Click to expand...
Click to collapse
Ok, if there are similar problems i can try to build a sspl based on 1.19
Please dump it and attach (see first post for the link to the dump kit)
To anyone who has problems, please look up your current SPL version.
(press volume down and power on).
Is there anyone who succesfully flashed the HardSPL where the old SPL version was 1.18.00 or higher?
jockyw2001 said:
Ok, if there are similar problems i can try to build a sspl based on 1.19
Please dump it and attach (see first post for the link to the dump kit)
Click to expand...
Click to collapse
Here you go...
http://www.mediafire.com/?sharekey=cb564520d236e90090a82c7bb0fad7ade04e75f6e8ebb871
Gawain1986 said:
Here you go...
http://www.mediafire.com/?sharekey=cb564520d236e90090a82c7bb0fad7ade04e75f6e8ebb871
Click to expand...
Click to collapse
Try the attached sspl which is based on your v1.19 SPL.
Run sspl.bat (preferrably in XP)
I'm sorry, but the new 1.19 SSPL is not working either. The phone stays in the black screen and both Windows XP x64 and Windows 7 x86 keep telling me the USB device is malfunctioning.
I have had some experience with unlocking my previous Tornado, VOX, Kaiser and X1 and I'm pretty sure I need to see a tri-color scren when invoking JumpSPL.
So maybe that's the problem?