Related
I have a sim & security unlocked Sprint phone touch pro 2 that we use on the AT&T network, USA. It works well, and registers with AT&T, but then after a bit it gets dropped, and pops up asking if you want to register with the network again. My friend has the same thing, and we are using different ROMs, and have tried different radios, but we both have this same issue. Does anyone have any idea how to resolve this issue, maybe a registry edit or something?
thanks.
I'm also curious about this. I'm on Verizon and was given the phone to keep from my last employer and my new one uses AT&T. I haven't done enough digging yet but wanted to *bump* this thread as I'm looking to keep my CDMA VZN phone and use it on AT&T permanently and wanted to know if there are others who have done this already.
*Anyone had success with using their CDMA phone with AT&T/Tmobile without GSM disconnecting as the OP mentions?
wooties said:
I'm also curious about this. I'm on Verizon and was given the phone to keep from my last employer and my new one uses AT&T. I haven't done enough digging yet but wanted to *bump* this thread as I'm looking to keep my CDMA VZN phone and use it on AT&T permanently and wanted to know if there are others who have done this already.
*Anyone had success with using their CDMA phone with AT&T/Tmobile without GSM disconnecting as the OP mentions?
Click to expand...
Click to collapse
wooties, I read somewhere where the verizon touch pro2 works for AT&T GSM in the us, but not sure where. Search xda and ppcgeeks. I have the Sprint touch pro 2.
I just answered this one in another thread, so here is a copy and paste...
With your AT&T SIM in you probably need to set to manual network instead of automatic so it stays connected to AT&T and doesn't try to flip back to CDMA - if you've already one this, then someone else will have to jump in, but the settings are:
All Settings > Personal > Phone > Network (tab) > Mode of Operation = GSM/UMTS Only
This should keep it from jumping back to Sprint and then back to AT&T where it asks you to register again...
Remember though, with a CDMA world phone, you will only get 2G coverage here with your data as the 3G radio is a different frequency.
Hopefully that does the trick - and if not, someone else jump in and save them quick!
Can you activate a Sprint Touch Pro2 on PagePlus?
Mine is Security & SIM unlocked, currently using an AT&T SIM card. Wonder about combining it with PagePlus on the CDMA network. That doesn't use a SIM card does it? I switched my network setting to CDMA only, and activated my phone on PagePlus and was told to dial *22890 or *228, but it didn't do anything.
pageplus
Anyone know exactly what you have to do to get a Sprint Touch Pro2 phone to work on PagePlus?
they would have to add the esn or meid to their database and "accept" the phone. good luck soldier.
SouthernAtHeart said:
Can you activate a Sprint Touch Pro2 on PagePlus?
Mine is Security & SIM unlocked, currently using an AT&T SIM card. Wonder about combining it with PagePlus on the CDMA network. That doesn't use a SIM card does it? I switched my network setting to CDMA only, and activated my phone on PagePlus and was told to dial *22890 or *228, but it didn't do anything.
Click to expand...
Click to collapse
You just said its SIM unlocked....Pageplus is CDMA only, cannot use a SIM card phone. Mainly verizon and sprint phones on pageplus
Don't waste your time. Ive been trying since the 13th to get VZW to add my ESN to their DB. your best bet is to do an ESN modification.
Page Plus will activate any unlocked CDMA phone. It can't be that difficult. Email their customer service and see what they say.
ACtivated but no data
Sprint Touch Pro2 now activated on PagePlus, but only text and voice. I've used EPST & QPST to alter settings, but can't get data.
Anyone successful at this?
SouthernAtHeart said:
Sprint Touch Pro2 now activated on PagePlus, but only text and voice. I've used EPST & QPST to alter settings, but can't get data.
Anyone successful at this?
Click to expand...
Click to collapse
Maybe you should flash a cooked ROM on it and do the Verizon provisioning. That might get your data going...
SaltyDawg said:
Maybe you should flash a cooked ROM on it and do the Verizon provisioning. That might get your data going...
Click to expand...
Click to collapse
I am using a cooked ROM, and have loaded Verizon provisioning, I think. Have you done this on yours and got it working? What ROM? Can you give me a link to the provisioning cab you used? That'd be great!
thanks.
SouthernAtHeart said:
I am using a cooked ROM, and have loaded Verizon provisioning, I think. Have you done this on yours and got it working? What ROM? Can you give me a link to the provisioning cab you used? That'd be great!
thanks.
Click to expand...
Click to collapse
No, I haven't done it. I activated a Verizon phone on Page Plus for a friend a while back, but that is the only experience I have with them.
Maybe put one of the cooked ROMs that is made for Verizon on your phone. That would essentially turn it into a Verizon phone, so I don't see what difference there could be.
whoa!!!
SaltyDawg said:
No, I haven't done it. I activated a Verizon phone on Page Plus for a friend a while back, but that is the only experience I have with them.
Maybe put one of the cooked ROMs that is made for Verizon on your phone. That would essentially turn it into a Verizon phone, so I don't see what difference there could be.[/QUO
I guess that is a possibility as both roms are CDMA. I would research it carefully beforehand. If you can get txt and voice there shouldn't be any reason you can't get data. sd
Click to expand...
Click to collapse
leslie50 said:
SaltyDawg said:
No, I haven't done it. I activated a Verizon phone on Page Plus for a friend a while back, but that is the only experience I have with them.
Maybe put one of the cooked ROMs that is made for Verizon on your phone. That would essentially turn it into a Verizon phone, so I don't see what difference there could be.[/QUO
I guess that is a possibility as both roms are CDMA. I would research it carefully beforehand. If you can get txt and voice there shouldn't be any reason you can't get data. sd
Click to expand...
Click to collapse
here is a thread by the way: http://forum.xda-developers.com/showthread.php?t=609863
Click to expand...
Click to collapse
Not sure if this will help but I activated my xv6800 on PagePlus and voice & text worked but not data. Once I changed the Data Connection login to the following, data worked.
username: min
p/w: vzw
Let me know if it works as I just got a Sprint Touch Pro I plan to activate on PagePlus
b.mann said:
You just said its SIM unlocked....Pageplus is CDMA only, cannot use a SIM card phone. Mainly verizon and sprint phones on pageplus
Click to expand...
Click to collapse
The Sprint TP2 (which the OP said he was using) is a CDMA/GSM world phone.
Which means it has a SIM card for the GSM radio in addition to an ESN for the CDMA radio.
Just because the phone takes a SIM card doesn't mean it is GSM only.
Sprint HTC Phones to PagePlus
gamescan said:
The Sprint TP2 (which the OP said he was using) is a CDMA/GSM world phone.
Which means it has a SIM card for the GSM radio in addition to an ESN for the CDMA radio.
Just because the phone takes a SIM card doesn't mean it is GSM only.
Click to expand...
Click to collapse
Hi Guys, Im an old newb but got some info for ya....
First, pageplus info is best found over at HowardForums.com, in the pageplus forums, please go there, and research, tons of info, but off the back, If anyone needs to get a line activated on Pageplus PM me, I can assist with that.
Use these detail, which I obtained from the Sprint HTC Phone to Pageplus Wiki pages over at HoFo: wiki.howardforums.com/index.php/Most_HTC_Devices, mods please let me know if this kind o post is prohibited
PS: the info on XDA is usually so good that I hardly ever need to post... But I would like to be more help to soemone, since so many otherz do the same...
Still yet to find even one person who personally has had success getting data on a SPRINT Touch Pro2 with PagePlus...
No one??
I've gotten dozens of folks who tell me how to do it, but I have yet to see anyone personally accomplish it.
SouthernAtHeart said:
Still yet to find even one person who personally has had success getting data on a SPRINT Touch Pro2 with PagePlus...
No one??
I've gotten dozens of folks who tell me how to do it, but I have yet to see anyone personally accomplish it.
Click to expand...
Click to collapse
Please access the link in the above post...attempt to do it yourself, then you report back...
bull crap
theres no way this can be right. I have tried
Username: min
Password: vzw
Dialup number: #777
The user must set the proxy server to - ppcgw1.vzwreseller.com
Ports must be set to - 8080
i have also tried
Username: qnc
Password: qnc
Dialup number: #777
and i mixed them both! Im pulling my hair out man! there has got to be somebody that knows something.
there is no way we cant find away around this like for metro or cricket. i had a diamond and touch pro with data and mms on metro and pageplus is a very cheap company that doesnt even have a server to begin with. when they activated my phone they got me on file for a samsung flip phone!
I have a sprint touch pro2 what is the deal!
SouthernAtHeart said:
Still yet to find even one person who personally has had success getting data on a SPRINT Touch Pro2 with PagePlus...
No one??
I've gotten dozens of folks who tell me how to do it, but I have yet to see anyone personally accomplish it.
Click to expand...
Click to collapse
I've tried every suggestion I've read here, h.f., ppcgeeks, ...
We need help out there, someone... please.
SouthernAtHeart said:
I've tried every suggestion I've read here, h.f., ppcgeeks, ...
We need help out there, someone... please.
Click to expand...
Click to collapse
I've seen a couple posts on PPC Geeks where people have got Sprint Touch Pro 2's working on Verizon. I would imagine it's probably the exact same process to get it working on Page Plus.
Maybe you should search for people that got it working on Verizon. I would imagine you'll have better luck that way.
Hey people, sorry if there is already a post for this but i'm a little confused about my phone. Is it possible for the verizon touch pro 2 to be used on GSM networks like AT&T? (I think its GSM) or overseas like in europe? A lot of people are saying yes and no, i just want some clarification.
Thanks. Just got my Touch pro 2 like 3 weeks ago and still figuring everything out. lol
The Verizon TP2 has both CDMA and GfSM, The phone is unlocked will work on edge band here in the states on T-Mobile and *((. Overseas without unlocking it will work on some 3G netwiroks depending the bands.
Yes to your question....
Verizon Wireless is not strictly CDMA; it too is GSM 850 in rural areas you expect AT&T to cover, and in fact T-Mobile has roaming agreements with on the 850 spectrum. It's not at all uncommon for VW to have GSM where it's bought a previous GSM territory as it did recently in both Alabama (Unicel) and Louisiana (Centennial Communications); both GSM 850.
ya. it will work. its a quad band phone. so you'll get 3g on t-mobile and att.
I got my SIM unlocked and threw in my buddy's T-mo SIM and made a phone call. The caller ID came up with his #.
yes i worked for me.. i used http://rhodiumw.htc-unlocks.com/ and it was a breeze.. im using a sprint touch pro 2... with Verizon firmware.. on the At&t network..
Only issues i have so far is my internet settings mess everyone once in a while and i have to reapplya At&t internet settings cab i have.. and i cant get 3g to work.. just Edge. and my MMS only sends.. i'm having issues with recieving MMS. Not sure if these issues are fixable but hopefully.
xpressyourcell said:
I got my SIM unlocked and threw in my buddy's T-mo SIM and made a phone call. The caller ID came up with his #.
Click to expand...
Click to collapse
Mine is doing that as well. How can we fix that?
Hey guys, one quick question:
I'm interested in buying tis phone but sadly I cant seem to find one available in Toronto or Markham (Ontario) so i'm thinking of buying one from TELUS (CDMA) since i heard they are sim un-lockable.
This post is merely a request for re-confirmation about that ability.
Will I be able to buy the HTC Touch Pro2 from Telus and sim-unlock it to use on Rogers/Fido Networks? Any limitations/advantages?
Can Telus do that unlock for me or is it a DIY software method?
I'm sorry if come off somewhat noob in my question :x I'm not new to the phone development but I havent been involved in the scene for almost 2 years and jus wanted a nudge in the right direction
Seems like a fun phone, esp with the ability to dual-boot android (i hate wm6...lol). Thanks again
kajiri said:
Hey guys, one quick question:
I'm interested in buying tis phone but sadly I cant seem to find one available in Toronto or Markham (Ontario) so i'm thinking of buying one from TELUS (CDMA) since i heard they are sim un-lockable.
This post is merely a request for re-confirmation about that ability.
Will I be able to buy the HTC Touch Pro2 from Telus and sim-unlock it to use on Rogers/Fido Networks? Any limitations/advantages?
Can Telus do that unlock for me or is it a DIY software method?
Click to expand...
Click to collapse
Yes there is one limitation. If you have the Rogers/Fido Id caller (7$ option), it will not work on the phone.
Instead of showing the caller name and number(even if he is not in your contacts), It will only show the Number.
bteljuice said:
Yes there is one limitation. If you have the Rogers/Fido Id caller (7$ option), it will not work on the phone.
Instead of showing the caller name and number(even if he is not in your contacts), It will only show the Number.
Click to expand...
Click to collapse
wow that sucks :/
so if someone i dont know calls me, (even with the callder ID service) only their number will show up? -_-
no way to get around that? i get a lot of people who call me outside of my contact list and it'd be annoying to not know whos calling lol
thanks for the reply
how can you tell the difference between a normal GSM TP2 and a GSM/CDMA one?
hi i have an htc touch pro 2 tha i bought in usa from sprint and it is boths cdma/gsm but i used here in greece in gsm,i wand to upgrate my rom to 6.5 is there any problem if i put an gsm only greek rom?
bteljuice said:
I got my SIM unlocked and threw in my buddy's T-mo SIM and made a phone call. The caller ID came up with his #.Mine is doing that as well. How can we fix that?
Click to expand...
Click to collapse
i'm pretty sure there is nothing to fix. since are using someone elses sim it is assigned to their phone number. the only sim that would show with your number would probably be the one that came with the phone. (if it did come with one). i have no idea how it would grab your number from the cdma radio but i guess thats how the stock one knows your #. if you put a different sim in it, it will have a different number.
psyman13 said:
hi i have an htc touch pro 2 tha i bought in usa from sprint and it is boths cdma/gsm but i used here in greece in gsm,i wand to upgrate my rom to 6.5 is there any problem if i put an gsm only greek rom?
Click to expand...
Click to collapse
DO NOT put a gsm rom on a sprint touch pro2! your phone is cdma!
well i ran into this problem on my htc fuze that i put a custom rom on for rogers. caller id would only display the phone number and not name. after few days of searching i have found a (rilphone for rogers CNAP.cab this is gsm patch dont try on cdma phone wont work) patch for the radio just install from phone soft reset and caller id with name worked. But that was a gsm phone. i dont know if maybe can work on some radio cab patch that could get this to work as well. Just posting this to see if anyone is up for the challenge.
Hello All,
I hope someone can help me with this.
I have a TP2 (Sprint) and I need to use it for At&t.
The first thing I did was unlock the device using RhodiumWUnlocker from Olipro (and made my donation ).
I did all steps, and everything went fine. No problems. And it detected AT&T
Then I flashed the ROM with EnergyROM Leo Manila 2.5 WM6.5 v 16Feb2010, By NRGZ28. (File: Energy.RHOD500.23529.Leo_MaxManila.16.Feb.2010.rar) - Still all well, no problems.
Then it went back to stock and could not detect AT&T. So I flashed the Radio Version: 4.49.25.91 from this thread: forum.xda-developers.com/showthread.php?t=549939.
Now I cannot turn on my phone at all - No "touchpro2" screen, no bootloader, nothing at all. The phone doesn't react to any combinations of buttons to turn on or load up bootloader. When I connect the phone to the computer (Vista by the way) the charging orange light comes on for about 3 minutes then goes off. Then I press the power button and the light comes back on, but nothing else happens to the phone.
Please help!!! Let me know what's wrong and how I can fix it, please!!! I'll make another donation to fix it.
Thanks!
I'm no expert but it sounds like you may have flashed a CDMA Rhodium with GSM firmware. I had a quick look and it seems the Sprint Rhodium is CDMA, you should have a look at the CDMA Rhodium forum here:
http://forum.xda-developers.com/forumdisplay.php?f=517
I'm not totally sure of the GSM / CDMA thing because I'm not in the U.S. it's not something I need to worry about.
Good luck dude
Yeah the more I look at this, the more I am convinced this is what has happened.
You used CDMA HardSPL (RhodiumWUnlocker)
Then flashed a CDMA ROM (Energy.RHOD500 ...)
but your mistake was to flash a GSM Radio ROM (I followed the URL you gave and up popped the GSM Radio ROM thread)
I don't know if this is recoverable but searching the CDMA forum would be a good start. You can't be the first person this has happened to.
Thanks for the response, but I am certain I flashed the correct ROM.
*I went to the wingster website
*I selected CDMA ROM's
*Clicked on EnergyROM Leo
*Clicked on Download - Hotfile.com
*Selected this ROM: Energy.RHOD500.23529.Leo_MaxManila.16.Feb.2010.rar
When I flashed this ROM, the phone loaded up without any issues. The only problem was that I could not make calls because it could not detect the AT&T SIM card. So I flashed the radio shown on the post from xda, and the PC said congratulations, everything is complete and good. At this time, the cell phone rebooted and it just never came back on.
Thanks for the help!!
Thanks MadBeef, I will research the CDMA forum.
The Main ROM you flashed was fine. It's the Radio ROM you flashed that killed it, because your phone is CDMA hardware but now it has GSM Radio ROM on it. That's my theory anyway, I'm hoping someone a bit more experienced with CDMA will be able to chime in.
If you can get back into the bootloader somehow, you should be able to flash a CDMA Radio ROM.
I only read the first line of your problem...sprint to at&t...it can never happen. Sprint is cdma which has no sim and at&t is a gsm which has a sim. You better have insurance so you can run over your now "speed bump" and get a new one.
shenriquez84 said:
Thanks for the response, but I am certain I flashed the correct ROM.
*I went to the wingster website
*I selected CDMA ROM's
*Clicked on EnergyROM Leo
*Clicked on Download - Hotfile.com
*Selected this ROM: Energy.RHOD500.23529.Leo_MaxManila.16.Feb.2010.rar
When I flashed this ROM, the phone loaded up without any issues. The only problem was that I could not make calls because it could not detect the AT&T SIM card. So I flashed the radio shown on the post from xda, and the PC said congratulations, everything is complete and good. At this time, the cell phone rebooted and it just never came back on.
Thanks for the help!!
Click to expand...
Click to collapse
ROM fine.
Radio ROM = BAD.
RHOD400 and RHOD500 are the model numbers for the Sprint and Verizon TP2s respectively. Other carriers also share these model numbers, but those are the big two.
The Radio ROM you flashed however is for the GSM only TP2, not the combo CDMA/GSM TP2 that you have.
Flashing that Radio ROM was a HUGE no-no. Boom.
akademik_acheeba said:
I only read the first line of your problem...sprint to at&t...it can never happen. Sprint is cdma which has no sim and at&t is a gsm which has a sim. You better have insurance so you can run over your now "speed bump" and get a new one.
Click to expand...
Click to collapse
You should put a little more time into research before jumping in with the flip comments.
1) Sprint does have SIM cards. I've got one in my hand. (No, they're not used in all phones of course, but Sprint does have their own).
2) The Sprint Touch Pro 2 can very well be used on ATT once it is security unlocked and a patched Radio ROM is flashed. To say "it can never happen" is flat out wrong because it's been happening for a few months.
3) The CDMA Touch Pro 2 models (RHOD400 and RHOD500) aren't just CDMA. They are CDMA/GSM/UMTS worldphones, supporting operation in all three modes.
I'm Sorry Gamescan if I did not understand correctly. Does this mean there is no help? There's absolutely nothing I can do to revert this and fix it?
I really appreciate all the help!!
I wanted to reply to Akademik's comment, but I didn't have time. This is not the first phone I flash, but it is the first CDMA/GSM phone. I know this phone is dualmode, else I wouldn't have bought it to use it in AT&T.
Thanks again!
shenriquez84 said:
I'm Sorry Gamescan if I did not understand correctly. Does this mean there is no help? There's absolutely nothing I can do to revert this and fix it?
I really appreciate all the help!!
I wanted to reply to Akademik's comment, but I didn't have time. This is not the first phone I flash, but it is the first CDMA/GSM phone. I know this phone is dualmode, else I wouldn't have bought it to use it in AT&T.
Thanks again!
Click to expand...
Click to collapse
Can you connect to it via a mtty terminal?
I don't know if the SD card flash method would work here. If it were my phone I'd try it, but if it's not getting as far as the bootloader I think the chances are slim Maybe while there is no SIM card in it, give the radio ROM less to do?
Found some CDMA radios here:
http://forum.ppcgeeks.com/showthread.php?t=90342
Sounds like you might be screwed but there's a few ideas you can try. Good luck.
gamescan said:
mtty
Click to expand...
Click to collapse
I knew that would get a mention sooner or later uh oh hehe
Sorry, but what's a mtty terminal? That's new material for me...
and as Madbeef said, I have no access to the bootloader screen. I'm pressing all possible combinations of keys, and nothing.
Thanks again.
gamescan said:
ROM fine.
You should put a little more time into research before jumping in with the flip comments.
1) Sprint does have SIM cards. I've got one in my hand. (No, they're not used in all phones of course, but Sprint does have their own).
2) The Sprint Touch Pro 2 can very well be used on ATT once it is security unlocked and a patched Radio ROM is flashed. To say "it can never happen" is flat out wrong because it's been happening for a few months.
3) The CDMA Touch Pro 2 models (RHOD400 and RHOD500) aren't just CDMA. They are CDMA/GSM/UMTS worldphones, supporting operation in all three modes.
Click to expand...
Click to collapse
shenriquez84 said:
I'm Sorry Gamescan if I did not understand correctly. Does this mean there is no help? There's absolutely nothing I can do to revert this and fix it?
I really appreciate all the help!!
I wanted to reply to Akademik's comment, but I didn't have time. This is not the first phone I flash, but it is the first CDMA/GSM phone. I know this phone is dualmode, else I wouldn't have bought it to use it in AT&T.
Thanks again!
Click to expand...
Click to collapse
this result is based on shenriquez american flag in his pro. basically saying hes in america using an american sprint tp2 and trying to use american att service.
gamescan, if i said it cant be dont its quite obvious ive done research through trials and also working a phone carrier for 3 years before finding a better job...THIS CANNOT BE DONE. the dual mode in the sprint tp2 is ment for when people travel to europe, they can pop their "european sim" in and be on their merry way. european cell towers accept the frequency of the sprint tp2 and establish a connection. the US towers have "locked out" tmo and att from being used in the sprint tp2. the reason why you found att on connection setup was that your phone was basically saying" yes att is here, but your not connecting". shenriquez i followed the link to the radio you flashed before you got "shut off". you shouldnt have flashed a GSM radio on a SPRINT TP2...you are bricked my dude. you gave your phone a seizure man.
shenriquez84 said:
Sorry, but what's a mtty terminal? That's new material for me...
and as Madbeef said, I have no access to the bootloader screen. I'm pressing all possible combinations of keys, and nothing.
Thanks again.
Click to expand...
Click to collapse
Google mtty (or search for it on here).
Short version it's text based, but it's pretty much the lowest level access that a consumer can get to a HTC device without ripping the sucker open, manually desoldering the flash chip and putting in another.
If you're not getting the tri-color bootloader screen, there is still the possibility of saving it via terminal commands, but it's not straightforward (and depending on what happened it is certainly NOT guaranteed).
akademik_acheeba said:
this result is based on shenriquez american flag in his pro. basically saying hes in america using an american sprint tp2 and trying to use american att service.
gamescan, if i said it cant be dont its quite obvious ive done research through trials and also working a phone carrier for 3 years before finding a better job...THIS CANNOT BE DONE. the dual mode in the sprint tp2 is ment for when people travel to europe, they can pop their "european sim" in and be on their merry way. european cell towers accept the frequency of the sprint tp2 and establish a connection. the US towers have "locked out" tmo and att from being used in the sprint tp2. the reason why you found att on connection setup was that your phone was basically saying" yes att is here, but your not connecting". shenriquez i followed the link to the radio you flashed before you got "shut off". you shouldnt have flashed a GSM radio on a SPRINT TP2...you are bricked my dude. you gave your phone a seizure man.
Click to expand...
Click to collapse
Only it can be done.
With the tools mentioned in this here very forum.
Any many people have done it.
Again, you're not doing your research and making claims that are flat out wrong.
1) The Sprint TP2 hardware does support the US GSM frequencies.
2) The Sprint TP2 hardware does not ship with a SIM lock.
3) The Sprint TP2 hardware does ship with the two US GSM frequencies disabled in software.
4) If you pay for the Olinex security unlocker you can easily flash a patched radio ROM which re-enabled the two disabled frequencies.
About the only correct thing said in the post above is that he should not have flashed a radio ROM from a GSM-only TP2 to a CDMA/GSM combo TP2. The two devices do have different hardware so flashing the wrong drivers *IS* a BAD THING(tm).
But, assuming you have paid for the security unlocker, flashing a Sprint TP2 with an updated radio ROM is stupid easy and once you've done that making it work on ATT or TMO in the US requires nothing more than slotting in an active SIM card and switching the phone to GSM mode.
If you don't know the answer to something, please feel free to ASK about it, but don't make unfounded and incorrect statements. When you state an absolute that is false it just spreads misinformation which makes things confusing for other users, especially those new to the device.
gamescan said:
Google mtty (or search for it on here).
Short version it's text based, but it's pretty much the lowest level access that a consumer can get to a HTC device without ripping the sucker open, manually desoldering the flash chip and putting in another.
If you're not getting the tri-color bootloader screen, there is still the possibility of saving it via terminal commands, but it's not straightforward (and depending on what happened it is certainly NOT guaranteed).
Only it can be done.
With the tools mentioned in this here very forum.
Any many people have done it.
Again, you're not doing your research and making claims that are flat out wrong.
1) The Sprint TP2 hardware does support the US GSM frequencies.
2) The Sprint TP2 hardware does not ship with a SIM lock.
3) The Sprint TP2 hardware does ship with the two US GSM frequencies disabled in software.
4) If you pay for the Olinex security unlocker you can easily flash a patched radio ROM which re-enabled the two disabled frequencies.
About the only correct thing said in the post above is that he should not have flashed a radio ROM from a GSM-only TP2 to a CDMA/GSM combo TP2. The two devices do have different hardware so flashing the wrong drivers *IS* a BAD THING(tm).
But, assuming you have paid for the security unlocker, flashing a Sprint TP2 with an updated radio ROM is stupid easy and once you've done that making it work on ATT or TMO in the US requires nothing more than slotting in an active SIM card and switching the phone to GSM mode.
If you don't know the answer to something, please feel free to ASK about it, but don't make unfounded and incorrect statements. When you state an absolute that is false it just spreads misinformation which makes things confusing for other users, especially those new to the device.
Click to expand...
Click to collapse
Prove your lame theory. Links that sprint gsm will connect to US towers. Even links in "this very forum". Different frequencies dude.
My two cents -- as I am new, too -- but I ran into a similar situation trying to update the radio on my Verizon TP2 due to 1X issues. My phone is unlocked as I was running Mighty but decided to return to stock (6.1).
Note: my SIM is not unlocked. If I understand correctly, the SIM needs to be unlocked to be able to install a radio from a different carrier, like Sprint.
[As a side note: I think these forums use the term "radio" a little too loosely because the program to unlock the phone to be able to flash unsigned ROMs is also called a "radio" unlocker.]
Back on topic: I flashed my phone with and unlocked radio 2.23.00WU and the result was similar to what happened to your phone: it did not turn on, orange light was on.
I was able to flash stock ROM back onto the phone using the USB cord and the phone is back to normal. Even though it was basically non-responsive except for the orange light.
My phone is in working order after the wrong radio incident.
I hope this helps.
--
sunNsnow
akademik_acheeba said:
Prove your lame theory. Links that sprint gsm will connect to US towers. Even links in "this very forum". Different frequencies dude.
Click to expand...
Click to collapse
If you believe that you're obviously flat out lying when you make the claim of having worked for a carrier for three years, because no one who worked for a wireless carrier could possibly be this ignorant about how GSM works. It's either that or you're purposely posting false information in a lame attempt to screw with the newbies on this site.
The Sprint TP2 hardware supports all four GSM frequencies - 850, 900, 1800, 1900. You can pull up any spec sheet on the model to see that. This isn't exactly hidden information.
Sprint disables the US frequencies in firmware.
If you are security unlocked you can flash one of the two patched radios in the sticky thread in this forum.
http://forum.xda-developers.com/showthread.php?t=578659
Then you toss an active SIM card into the phone and turn it on while in the US. Set it to GSM mode and bam, you're on a US tower.
Your claim is the equivalent of running around screaming "The sky is GREEN because I say it is! The sky can't be blue. That's false!"
sunNsnow said:
My two cents -- as I am new, too -- but I ran into a similar situation trying to update the radio on my Verizon TP2 due to 1X issues. My phone is unlocked as I was running Mighty but decided to return to stock (6.1).
Note: my SIM is not unlocked. If I understand correctly, the SIM needs to be unlocked to be able to install a radio from a different carrier, like Sprint.
Click to expand...
Click to collapse
The phone needs to be security unlocked to flash a different radio. If it is not security unlocked a unsigned radio will cause the boot sequence to fail. Flashing a carrier provided radio will restore the phone to service.
Security Unlocking means setting the phone to SuperCID. It is different than SIM unlocking.
SIM unlocking allows you to use different SIM cards. It does not allow you to flash unsigned radios.
The Olinex unlocker will both security unlock you (SuperCID) and SIM unlock you (if needed).
if device was security unlocked and is detected by pc, most likely it can be recovered by mtty. unlike my case where device was not sec unlocked but its detected by mtty using usb or serial. bad news is it would be very hard to recover, im doing some jtag research first, at least i found the pins but no pinout.
gamescan said:
If you believe that you're obviously flat out lying when you make the claim of having worked for a carrier for three years, because no one who worked for a wireless carrier could possibly be this ignorant about how GSM works. It's either that or you're purposely posting false information in a lame attempt to screw with the newbies on this site.
The Sprint TP2 hardware supports all four GSM frequencies - 850, 900, 1800, 1900. You can pull up any spec sheet on the model to see that. This isn't exactly hidden information.
Sprint disables the US frequencies in firmware.
If you are security unlocked you can flash one of the two patched radios in the sticky thread in this forum.
Click to expand...
Click to collapse
thats for a radio not rom. find the cdma rom that allows you to use a gsm sim. you cant use the cdma rom over att network...and that link you posted, there are no success stories in it, only complaints. you have no idea what you are talking about. you sit there posting false statements and trying to sound smart with your handy thesaurus. stop posting false statements lame.
Hello,
I have a sprint touch pro 2 its unlocked and im trying to use it with att service and i need to delete the sprint settings for the internet and put atts in but i dont know how and was wondering if someone can please help me..
thanks
unfortunitly the sprint phone works off of a different type of network..
Sprint = CDMA
ATT = GSM
they are not compatable with each other..
how ever there is a member with a ATT touch pro 2, that needs a TP2 that works on a CDMA network... maybe you 2 can work something out and trade?
uncleswoop
http://forum.xda-developers.com/showthread.php?t=699575
johng75 said:
unfortunitly the sprint phone works off of a different type of network..
Sprint = CDMA
ATT = GSM
they are not compatable with each other..
Click to expand...
Click to collapse
ummm the sprint touch pro 2 works on at&t
i'm using my sprint phone on at&t
amanda88 said:
Hello,
I have a sprint touch pro 2 its unlocked and im trying to use it with att service and i need to delete the sprint settings for the internet and put atts in but i dont know how and was wondering if someone can please help me..
thanks
Click to expand...
Click to collapse
i suggest flashing a new rom if you hardspl on your phone and olipro unlocked your phone
did you unlock your phone yourself using the links here or sprint told you it's not locked? your phone is not locked for using outside the us but is locked from using us sims unless you unlocked it with the hardspl and olipro method mentioned. the process is spelled out on these boards and ppcgeeks. after that you need to add the att settings to connect to the internet. i'm sure you can find those settings here or ppcgeeks. i have not done this myself but i've seen enough links on the subject here.
amanda88 said:
Hello,
I have a sprint touch pro 2 its unlocked and im trying to use it with att service and i need to delete the sprint settings for the internet and put atts in but i dont know how and was wondering if someone can please help me..
thanks
Click to expand...
Click to collapse
Friend, you are going to be very happy.... go to this url for detailed instructions for using your sprint tp2 on ATT.
http://pocketnow.com/tweaks-hacks/unlock-the-sprint-touch-pro2-radio-to-get-us-gsm
It worked fine for me
Make sure you pull out any SD card and ensure your AT&T SIM card is installed throughout the process.
No 3G though no one seems to have defeated that roadblock yet.
Make sure you do not flash anything but Hard-SPL until you have succeeded. You might find you are already unlocked by booting the tricolor bootloader mode (power on with down volume depressed) and looking for olinex on the second or third line also look for "Security Unlocked" on the top, otherwise you need to sim and carrier unlock it. The link about gives you all the details.
Best of luck mate
Once you have flashed the radio described at the end of the video, remember to ONLY use CDMA ROMs, a GSM ROM can brick you even though you are using a GSM radio mode, only use ROMs specific for the Sprint CDMA, I recommend NRGs ROM for CDMA after they reboot they setup all your ATT settings for you. What more could you ask for?
Works for me as well, but I'm using the June 11th release of EnergyRom for CDMA phones.
Here's what I did:
1. Hard SPL unlock (free)
2. Flash the ROM of your choice, I used EnergyRom (free)
3. Do the SIM Security Unlock (~$20USD)
4. Then flash a World Unlocked radio to your phone (free)
Once you have a World Unlocked radio flashed, then you can pop in the SIM card of your choice, change the phone to GSM mode, then the phone will pop up a menu to provision settings for that network provider. The CDMA Touch Pro 2's do not have the bands needed to support 3G in the US, so you will be only on 2.5G Edge Net speeds.
Happy hacking