So is the latest version 2.3.5 (ie: 2.3.15? I think?) or 2.3.3? And do you need to deodex prior to installing it, or does it deodex as part of the install?
Also, is it available without the app? I don't like apps like blackhat's and rom manager really... If so, where is the latest version?
Thanks, and sorry for the redundancy - I just can't make out the information through all the noise these past few days
fyi the newest version of TranQ is 2.3.5rc, and yes you do need to deodex before installing it or you will have issues.
I'm not sure it is posted yet tho. Only place I have seen it so far is in TBH's app. Which mind you gets there stuff a few days prior to it being posted online so others can get it for free.
Edit: for refernce there is a thread discussing it being done.
http://www.mydroidworld.com/forums/...ty-2-3-5rc-completely-deodexed-ota-2-2-a.html
will2live said:
fyi the newest version of TranQ is 2.3.5rc, and yes you do need to deodex before installing it or you will have issues.
I'm not sure it is posted yet tho. Only place I have seen it so far is in TBH's app. Which mind you gets there stuff a few days prior to it being posted online so others can get it for free.
Click to expand...
Click to collapse
You are correct you do need to be deodexed prior to installation. If not as stated you will have issues.
2.3.5 is based off 2.3.15
I have a rooted stock Rom, but with UCLA kernel and radio. Thinking of dumping the kernel as battery life isn't great and would like to under-clock. It's a Roger's Rom and also have CWM.
I notice these three kernels, know that the first kernel does oc/uc, so does the second, not sure about the third. The first one is version 10b, doesn't show on the first page of the thread, but people are having good success with it.
1. Skyrocket[2.6.35.14](v009)OC~1.73GHzGPU OCOTGUVSLQBBLN_herc-kernel-010b1
2. [Kernel]_faux_skyrocket-kernel-009m
3. Stock-ish 0.3 BLNUSB-OTGNFSFUSEinit.dadb rootboot animation_kernel-att-bln-0.3
Any suggestions?
Bump... Please!
idle on 10b1 is good, but I know for sure 009m is stable while the other is a beta. I'm undervolting at -100 mV and loving it
Also as a side note, please don't be so impatient, wait at least a day before bumping
What do you mean by Idle is good.
I did find the one you mentioned:
[Kernel]_faux_Skyrocket[2.6.35.14](v009)OC~1.73GHzGPU OCOTGUVSLQBBLN_herc-kernel-010b1
Click to expand...
Click to collapse
But it says Hercules at the end, and I read one post in the thread that said not to put it on a Skyrocket. So I don't think I can use it for my phone.
Am I right here?
read the thread and look for my post near the end, I put up q direct link to the skyrocket compiled version awhile back. By idle I mean when the phone is sitting and not in use. "Deep sleep," proper term.
Found your link to the Skyrocket one. Thank you.
I did not create "this" and I'm not taking credit for it. This is an awesome kernel created by an awesome dev. I have seen a lot of people asking about where to find this kernel so I asked the dev if I could make this thread to help everyone out over here. I do plan to keep this updated as he updates his OP over on Rootz.
LINK TO ORIGINAL POST ON ROOTZWIKI
This is a kexec Touchwiz test kernel. Use his thread to report bugs, etc.
WARNING: If you're on full stock, you must install busybox first.
DOWNLOAD
latest beta kernel: flashable zip
to return to stock kernel: flashable zip
INSTRUCTIONS
Make sure you're on a recovery that supports auto-flash (any CWM compatible recovery should work - I use v6.0.1.0).
Make sure your ROM has busybox installed properly (otherwise it will bootloop).
Download and flash the zip file in recovery (yup that's it).
Reboot (it will appear to boot twice after that and at every boot).
FEATURES
Unnecessary components removed for lean and fast kernel.
Compiled using latest Linaro compiler with additional optimizations.
Latest Linux updates applied (currently up to 3.0.39).
Ramdisk optimizations.
Kexec (credit goes to Mike Kasick, Austin Dicken, etc.)
OC'ed to 1.9Ghz (limited to 1.51Ghz at boot, use an app to change max freq)
SIO I/O scheduler default
Fast Charge (toggle via the "ffc" script - open terminal, type ffc then enter, plug in phone via USB)
On-demand governor backported from Linux 3.5
CHANGELOG (BETA)
v0.1 (b31fd85c46133f21d3e83d2a5c7d6f94) - initial beta release. Changes from test v12.2.
CHANGELOG (TEST KERNEL)
v10.4 - initial test release
v11.1 (0a169bbc58f7f5b14315f6e2dad47226) - leaner kernel, ondemand governor backported from Linux 3.5, latest interactive governor (not recommended yet)
v12 (8d31143328f19a6183ce6ed50d3f2f76) - fixed default max frequency (really set to 1.51ghz), custom boot animation support, init.d support, Linux 3.0.39 update
v12.2 (3640421cf043e4bdb88de3162c9984fa) - fixed blue LED issue at boot for some ROMs.
TODO
This is alpha/test kernel. More development will come.
Remember this is just a repost of his OP. To get support from the dev you will more than likely have to go over to Rootzwiki to get it. All of the links in this post redirect to the OP on Rootzwiki and not to download links. You will have to go to his OP to download the kernel.
Disclaimer said:
Me and this dev are not responible for you not reading the entire post on either site and bricking your device or anything else you might want to blame either of us for.
Click to expand...
Click to collapse
How do I use USB Fast Charge?
1) Unplug from USB cable.
2) Open Terminal Emulator, type "ffc" (without quotes) and enter. This command will toggle your fast charge state.
3) Plug it back in.
Note: running the same command again will disable fast charge.
Also, when fast charge is enabled USB communication will be disabled.
Why KEXEC?
I actually had my own hybrid recovery/kernel method, which was kinda cool. No special kernel modification was necessary, simpler boot hijack, etc. But it did mean that recovery was modified and required flashing into recovery partition for every new version. Plus all the cool cats were using kexec.
I don't mean to be a jerk or step out of place, but ,there really isn't any development here since everything is centered at Rootz. I can certainly understand a DISCUSSION thread in General, but all the actual development is over at Rootzwiki. Why not create a discussion thread in General and allow Imo to make his own thread in development if he so chooses to do so?
That's my 2 cents. Mods feel free to nuke my thoughts here if you'd like.
bobloblaw1 said:
I don't mean to be a jerk or step out of place, but ,there really isn't any development here since everything is centered at Rootz. I can certainly understand a DISCUSSION thread in General, but all the actual development is over at Rootzwiki. Why not create a discussion thread in General and allow Imo to make his own thread in development if he so chooses to do so?
That's my 2 cents. Mods feel free to nuke my thoughts here if you'd like.
Click to expand...
Click to collapse
I didn't want it to get lost in General and I asked him if he wanted me to make one or if he could make one over here for us and he told me to go ahead. I see where you are coming from though.
EDIT: If mods feel this should be elsewhere feel free to move it. I just figured this would be the best place to put it.
Yah i think it will be useful since half of the Rom threads are all about this kernal anyways there taking up way to many pages. There does need to be a seperate thread for it so good ups.
If you did not development nor can support it then it does not belong in Development
Thread moved
Also please show where the original developers authorized you to copy their material and links
Thanks
FNM
kennyglass123 said:
If you did not development nor can support it then it does not belong in Development
Thread moved
Also please show where the original developers authorized you to copy their material and links
Thanks
FNM
Click to expand...
Click to collapse
Sent you a PM with screenshots of imo and I's conversation.
Does anyone know how to get the phone to charge while it's off on this kernel? My phone will just vibrate but won't charge while off.
d1ez3 said:
Does anyone know how to get the phone to charge while it's off on this kernel? My phone will just vibrate but won't charge while off.
Click to expand...
Click to collapse
I have never tried to charge with the phone off. Beta just released about 20 minutes ago. Try that and see if it fixes it.
EDIT: Might have found the answer over on Rootz.
http://rootzwiki.com/topic/31329-imoseyon-beta-leankernel-tw-88-v01-kexec/page__st__260#entry870710
thanks, trying the beta now
No problem. I have the beta on my phone and it seems really solid so far.
this has already been covered in my guide...i think having multiple guide threadz for each and every rom/kernel is silly and confusing. which is why i made a all in one guide that covers all develpment and tweaks...what not. part of the reason i link to the original dev threads so users can keep up on the lastest there but ask questions in my thread.
droidstyle said:
this has already been covered in my guide...i think having multiple guide threadz for each and every rom/kernel is silly and confusing. which is why i made a all in one guide that covers all develpment and tweaks...what not. part of the reason i link to the original dev threads so users can keep up on the lastest there but ask questions in my thread.
Click to expand...
Click to collapse
I didn't realize there was a link to Imos kernel anywhere except inside of ROM threads so I figured I would duplicate his post here so people here would see. There is a whole lot of people who posted in the Synergy thread that they didn't know where his kernel was or where to find it and things like that. I figured the easiest way would be to have a post on XDA devoted to his kernel. If we had a mega thread of all the root methods, tools, ROMs, kernels, and themes then that would probably be better than this to help people find anything they may need for their phone with very little effort.
I'm assuming this wont work on the cm10 nightlies?
Will kexec kernels still work with an unlocked bootloader
Sent from my SCH-I535 using xda app-developers app
vx2ko said:
Will kexec kernels still work with an unlocked bootloader
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
yes. in their current form your device will still boot like 3 times though. There will be no change. In the next few days devs will be unpacking their zips and removing the kexec process. Now they just need to copy over any modules and dd the kernel to mmcblk0p7. But yes, these kernels will still work fine right now.
When the devs repackage them, however, you will no longer have to bootloop 3 times before booting with your custom kernel. it will load on first boot everytime, until you dd the stock kernel back to mmcblk0p7
When I flash nothing happens?
I just put on the Psycho ROM on my i9300 today and wanted to test this kernel out to see what 1.9Ghz feels like. I downloaded both the experimental and stable build.
I flashed the experimental build first, but my Siyah kernel still showed up. So I tried it again, but to no avail. Same incident with the stable build.
I notice when it flashes it seems like less than a second... I downloaded the experimental build v1.7 a few days ago, and its stable build today.
Any ideas?
Heatshiver said:
I just put on the Psycho ROM on my i9300 today and wanted to test this kernel out to see what 1.9Ghz feels like. I downloaded both the experimental and stable build.
I flashed the experimental build first, but my Siyah kernel still showed up. So I tried it again, but to no avail. Same incident with the stable build.
I notice when it flashes it seems like less than a second... I downloaded the experimental build v1.7 a few days ago, and its stable build today.
Any ideas?
Click to expand...
Click to collapse
Ask in the proper section this is for Verizon GS3.
Sent from my Galaxy SIII
Still getting WiFi drops on HD based Roms? Thats the only stopping me from using LK
TokedUp said:
Still getting WiFi drops on HD based Roms? Thats the only stopping me from using LK
Click to expand...
Click to collapse
Nope. Imo says not to use the latest (October 27) release on anything newer than G1.
Sent from my SCH-I535 using xda app-developers app
I'm just wondering what it means by Nightly.
I think I understand that, small updates will be released like right now it's at r75
How do we install them? Do we need to wipe?
Or do we just use CWM and install?
I recently had this question too. I was under the impression that a new ROM was put out every night and after reading the synergyrom thread I figured out that the ROM only changes when the number advances, e.g. r73, r74, r75.
Each day you'll see a new ROM link listed with the r##. If its still for example r73, then nothing has changed.
Someone else can correct me if I'm wrong but I believe nightlies give the dev's the liberty to keep tweaking it without having to update the original post all the time. Instead you can see a changelog if you visit the dev's github.
Just reference the first post and you'll find the links for the ROM download page and even the changelog page.
If you are not coming from a recent synergyrom build I'd fully wipe and then flash this in CWM.
Happy Flashing!
Sent from my SCH-I535 using xda premium
I recently updated mt elementalx kernel to version 3.14 through the app, but it appears to make the camera not work with any application.
For now i've downgraded back to 3.06 and the camera works fine. Does anybody know why it's happening or is it just a bug that's gotta be fixed?
MachCoyote said:
I recently updated mt elementalx kernel to version 3.14 through the app, but it appears to make the camera not work with any application.
For now i've downgraded back to 3.06 and the camera works fine. Does anybody know why it's happening or is it just a bug that's gotta be fixed?
Click to expand...
Click to collapse
Read the thread and make sure it's compatible with your update (such as March if that is what you're on).
Folks, I realize that this is an older thread, but it wasn't brought to my attention until recently, so I've sent the posts to their rightful place and will be locking this one.