Database Info

I have no Radio

Hello everyone..Im newbies here.I lost my radio when trying to upgrade to cotulla`s rom.Here is brief explanation on what i have gone through.
-i use magician(02 xda ii mini)with default wm2003se and 1.11 radio.
1.I try to upgrade to cotulla`s 03 wwe where its need 1.12 radio version
2.I flash the radio using MusikMonk instruction in upgrd radio 1.12x thread.
3.1st i use usb flashing method and receive annoying 141 error.
4.I move to SD flashing method where i notice the radio have lost from my device.(red text in start screen show only wwe info istead of other before/there is no radio info in device information in os)
5.I try all other radio installation in ftp and receive same 141 error.
6.follow MusikMonk advice by backup the current os using romupdateutility and got the .nb1 file.-read using ntrw in cmd.
7.copy the 416byte header and edit to radio (.nb1) file attached in MusickMonk instruction.write to sd card but when try to flash in bootloader receive section=1 not allow update!.
8.Try same method with different radio file i found in ftp(I convert .nbf to .nb1 using nbfdec)
9.again stuck when flashing(section=1 not allow update!.)
10.try to update with shipped rom but receive 141 error(stuck in 50%/step 1:updating radio.Since i think i have no radio this error occur)
11.still going around with other radio file->convert->edit->flash->stuck...
I still browsing around this forum to find solution.Got fever because its exhausting me..i need to done this fast since this is the only phone i have and cant afford other.
So.I really need everybody expertise and advice especially for those have experience with this problem..Really need all of u.Thanks for view.
p/s:thanks for kind guys,MusikMonk who help me much in his thread..

plis forum expert,i need your help..

you try download WWE_04 include radio 1.12 and flash this rom.

Look http://forum.xda-developers.com/showthread.php?t=514864.

there is where i lost my radio daley.Upgrade with wwe 01,02,04 still wont work.stuck in 141 error.(i have no radio,i think what the heck can those rom upgrade?)

before wwe3.03 installing your pda call normal? but with 2003SE and r1.11 shiprom, radio still work? try other no success. I think you have a pda with damage radio hardware

before it try to flash the radio,my magician work normally as it is..

Hi,
is your battery ok? I've just the same problem to flash a radio... the battery seams OK, but it's too old. I've inserted a new one from my other xda mini, and the flash works well.
Try again with a new battery...
So long,
MrFX

mistereffiks said:
hi,
is your battery ok? I've just the same problem to flash a radio... The battery seams ok, but it's too old. I've inserted a new one from my other xda mini, and the flash works well.
Try again with a new battery...
So long,
mrfx
Click to expand...
Click to collapse
谢谢!谢谢!谢谢!谢谢!

[ROM][32A] CursorSense32A-1.2.6.1 - NOW CM UPDATER FRIENDLY! [01-30-10]

CursorSense 32A
This ROM just keeps getting better and better! This has turned out to be a lot of fun!
This is a 1.5 Cupcake Sense UI ROM based on the official 3.05 Rogers HTC RUU for people who need a stable ROM with all the features working.
If you enjoy my work, and appreciate the time spent, please consider a donation!
ENJOY!
Thanks goes to:
- Amon_RA for the Hero recovery
- MoDaCo for finding the 1.76.2007 SPL for Hero that works on Magic too.
- Teknologist for the new kernel that I'm using (DAMN!!! This is fast!)
- MLIGN for the framework-res.apk from MLIGN v3.3 (Nice battery icons!)
- Many more as well, please let me know if I've used part of your work and have not credited you. I'm not here to make enemies.
** YOU MUST HAVE RADIO 6.35.07.29 OR HIGHER AND SPL 1.76.2007 ENG BEFORE FLASHING THIS ROM. THIS ROM CANNOT BE FLASHED ON A DEVICE WITH PERFECTED SPL 1.76.0007!
** MAKE SURE YOU ARE 100% SURE THAT YOU HAVE THE RADIO UPDATED TO 6.35.07.29 OR HIGHER BEFORE APPLYING THE NEW SPL!!!!
** DO NOT APPLY THESE UPDATES TO A 32B MAGIC/SAPPHIRE OR A HTC DREAM/G1. YOU WILL BRICK YOUR DEVICE!!
Because of the size of the /system partition, this ROM will not flash onto any Sapphire 32A with the 1.33.20XX Eng SPL.
You will need to have the 6.35 radio and 1.76.2007 SPL, and the Hero (not Magic/Sapphire) Recovery from Amon_RA to flash this ROM. Follow the directions at http://forum.xda-developers.com/showthread.php?t=605239 to flash the new radio, SPL and recovery.
Once you have the new SPL, Radio and Recovery, then you can apply CursorSense32A like any other ROM update.zip file.
If you don't know what I'm talking about here, please do not attempt to flash this ROM, or change your radio/SPL/recovery. Actually, if you don't already have an Eng SPL 1.33, this ROM is not for you.
Frequently Asked Questions
Read this before posting any questions!!!
CM Updater Information
Version 1.2.4 or higher is now CM Updater friendly! These versions include CM Updater 4.5.2.
Within CM Updater, scan this QR Code, or type in the update address: http://www.theandroidkitchen.com/updates.json
CM Updater can only download updates as of right now, you need to move them to the root of your SD and apply manually.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to Cyanogen and garok89 for the CM Updater!
Changelog
Always create a nandroid backup before applying a new update.
Custom Recovery RA-Magic32A-6.35-v1.6.2
Mounts SD card immediately, based on RA-Sapphire-v1.5.2H
Highly recommended!
Flash through FASTBOOT
Code:
fastboot erase recovery
fastboot flash recovery recovery-RA-Magic32A-6.35-v1.5.2.img
fastboot oem powerdown
CursorSense32A-1.2.6.1 Incremental Update / MD5SUM
REQUIRES 1.2.4 be installed first.
CursorSense32A-1.2.4 / MD5SUM
Note: If you don't want CM Updater to ask you to install a Cyanogen ROM, use the instructions above.
Apps Pack
Apply as update to version 1.2.3 or higher, do not wipe before.
Only has to be applied once since version 1.2.5
Standard Default Lockscreen (Any version)
Apply as update to any version, do not wipe before.
Only has to be applied once since version 1.2.5
Nexus Bootscreen Mod
Apply as update to any version, do not wipe before or after
Will not work on versions older than 1.2.3
Only has to be applied once since version 1.2.5
CIME Pack is no longer supported.
Other CIME packs for Hero work, so you can try those.
Please feel free to make suggestions or ask any questions you may have.
I'm not a professional Android developer, more of a hobbyist.
If you like my work and appreciate the time I spend to create this ROM, please consider a donation.

REQUEST
hey m8 just wondering if u have a working g-sensor and if so can i have a dump ? i have messd op my own when using compass from market while in SU mode "debugging" ..lots others dudes have had their g-sensor smashed by the publisher of COMPASS plz nandroid plz...
great rom ...but the rapid share link is ONLY working if your on a landline ... mobiles is sharing ips
thx m8 ....

Please click Reply instead of Quote next time. We don't need that whole pile of text all over again.
Here's my system.img. Stock 3.03 image.
http://rapidshare.com/files/313044556/system-3.03.990.6-32A.zip

request
thx ill post response about it later
thx

Hey cursordroid, nice upload, thx.
(1) Is the radio u supplied with this rom compatible with Rogers 19003G and Fido 8503G?
(2) can this SPL be flashed over 1.33.2005 SPL?
(3) Can I flash back to other roms after flashing 1.76.2007 SPL
thanks in advance

Dave778 said:
Hey cursordroid, nice upload, thx.
(1) Is the radio u supplied with this rom compatible with Rogers 19003G and Fido 8503G?
(2) can this SPL be flashed over 1.33.2005 SPL?
(3) Can I flash back to other roms after flashing 1.76.2007 SPL
thanks in advance
Click to expand...
Click to collapse
(1) Yes, I'm running this radio on my Rogers 3G right now. (850/1900)
(2) This SPL can only be flashed over 1.33.20xx. Make sure you do it in the right order by following the instructions in the post.
(3) You would need to revert back to your 3.22.20.17 radio and 1.33.2005 SPL. This is easy though.
If you like the Sense UI and widgets and want a fast and incredibly stable ROM, this is the one to use!

THX! jus what I needed to hear when reverting back to 2005 spl and 3.22.20.17 radio do I have to use goldcard or can I jus flash over with amons recovery?

I'd like to try out this rom but I really don't know about radio and SPL
So this is my situation:
HBOOT -1.33.0008 (SAPP10000)
RADIO-3.22.20.17
Untill now I've tryed every rom I could... So help me out
Thanks

Dave778 said:
THX! jus what I needed to hear when reverting back to 2005 spl and 3.22.20.17 radio do I have to use goldcard or can I jus flash over with amons recovery?
Click to expand...
Click to collapse
Even though these instructions are for flashing to 32A radio from 32B radio, they work the same for downgrading from the 6.35 radio to the 3.22 radio.
http://forum.xda-developers.com/showthread.php?t=544761

thx again! will flash at work when nobody is around ;-)

ive never flashed my spl or radio..how can i find out which version i have?
im running mygd's senseui rom..do you think its worth an upgrade?
edit: your links seem to have a very strict limit. if its not much trouble do you mind uploading them on a mirror?

I use a European unbranded HTC Magic 32A with support for 900/2100 MHz 3G bands, but not for the Rogers/AT&T 850/1900 Mhz bands. Will the radio work on my phone? Wouldn't want to brick it....

manuroc said:
I use a European unbranded HTC Magic 32A with support for 900/2100 MHz 3G bands, but not for the Rogers/AT&T 850/1900 Mhz bands. Will the radio work on my phone? Wouldn't want to brick it....
Click to expand...
Click to collapse
the radio.img doesn't control the actual frequencies that the phone uses. That's controlled through what type of hardware antenna is in the phone.
This radio.img is safe to flash for any 32A.

grimey01 said:
ive never flashed my spl or radio..how can i find out which version i have?
im running mygd's senseui rom..do you think its worth an upgrade?
edit: your links seem to have a very strict limit. if its not much trouble do you mind uploading them on a mirror?
Click to expand...
Click to collapse
I'm on limited bandwidth, so I can't mirror these.
RapidShare can be annoying at times, but stick with it, you'll get the files downloaded.

its working now, all i needed was a little patience.
since ive been flashing my phone a lot lately to find a decent rom, my phone is pretty much fresh..so i dont mind flashing again..
ill test this and get back to you..ahhh i hope i dont brick it..this will be my first time updating the radio and spl

rooted?
Language included Chinese?
Sorry, my English is very poor。

mumazz said:
rooted?
Language included Chinese?
Sorry, my English is very poor。
Click to expand...
Click to collapse
well,you have to install a software called "more local"
it contains Chinese language.
well, change HTC-CIME to HTC-IMC is not good for chinese user, but we can install other Chinese input software.
that's ok

grimey01 said:
its working now, all i needed was a little patience.
since ive been flashing my phone a lot lately to find a decent rom, my phone is pretty much fresh..so i dont mind flashing again..
ill test this and get back to you..ahhh i hope i dont brick it..this will be my first time updating the radio and spl
Click to expand...
Click to collapse
ok back..
i was able to flash the SPL and the ROM..while the radio and boot both gave me a signature verification fail..
however, i was going through a bootloop since the radio isnt there..so i just flashed it back to the old rom i was using..
EDIT: i tried to flash the radio again through fastboot..right now its saying "writing 'radio'..."
its been like that for a few minutes..anything wrong?
EDIT 2: uhm..still same msg ..and for the phone, the screen is still black with the light on. could this be due to having the spl already updated before the radio?
EDIT 3: everything is okay now..will get back to you after going through the rom for a day or so..THANKS!!
EDIT 4: noticed theres not much free space on the phone..might wanna remove useless stock apps for your final release.

grimey01 said:
ok back..
i was able to flash the SPL and the ROM..while the radio and boot both gave me a signature verification fail..
however, i was going through a bootloop since the radio isnt there..so i just flashed it back to the old rom i was using..
EDIT: i tried to flash the radio again through fastboot..right now its saying "writing 'radio'..."
its been like that for a few minutes..anything wrong?
EDIT 2: uhm..still same msg ..and for the phone, the screen is still black with the light on. could this be due to having the spl already updated before the radio?
EDIT 3: everything is okay now..will get back to you after going through the rom for a day or so..THANKS!!
Click to expand...
Click to collapse
Could you already tell us if it is faster then GyD's Sense rom? ;-)

magicdroid said:
Could you already tell us if it is faster then GyD's Sense rom? ;-)
Click to expand...
Click to collapse
its actually pretty good so far..havent run it too long to really tell..
the thing is im sitting on 30mb of free ram (but i do have a lot of programs open, most of which are auto-start..not sure if theyre important or not so i dont wanna remove anything) and i have 90mb free space..yet its still smooth..
one thing id like to see is the transparent lockscreen. it can be added on your own if youd like. im going to try to do that right now

Rooting the SPL 1.76.0009

Hey everyone..
U need to thank Orange_24 for this..
It took me a WHILE (3 hours of seaching intense) to find out how to root the 1.76.0009 so i thought i would make a new thread to help people .. but i found it deep in a forum in here
RUU:
4shared.com/file/MjOxJBX0/RUU_Sapphire_HTC_Europe_305401.html
Recovery RA-Hero
rapidshare.com/files/360227978/recovery-RA-hero-v1.6.2.img
Engineer's SPL 1.76.0007
4shared.com/file/211145376/3da88b40/update-hboot-1762007-signed.html
THIS METHOD WILL DELETE ALL DATA ON YOUR PHONE! Proceed at your own risk!
1. Download RUU linked above.
2. Install update using RUU.
3. Turn on phone and connect to computer.
4. Get RA recovery and SPL also linked above and drop them to sdcard root directory.
5. Run SDK: adb shell
6. Install recovery: flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img
6. Turn off phone and turn on again holding Power+Home. RA Recovery should appear.
7. Flash zip from sdcard.
8. Use file: update-hboot-1762007-signed
9. Done. PSPL broken.
10. Build a shrine for orange_24
I did this to mine and it worked ..
Bowing before the community
EDIT:
since many people have problems with windows 7 an windows 7 x64 i will thank the LayZeeDK for writing this so i dont have to ..
First install HTC Sync. Then try these drivers: http://www.multiupload.com/RJRAYM75A2
Start > Devices and Printers > Right click 'Android Phone' > Properties > Click 'Hardware' tab > Press the one with 'Disk drives' type > Properties > Update Driver... > Browse my computer for driver software > Let me pick from a list of device drivers on my computer > Have Disk... > Pres 'Browse...' > Browse to the drivers in the folder 'Vista_x64' to which I linked above e.g. 'C:\Users\Lars\Desktop\Vista_x64' > OK > Choose 'My HTC' or whatever it shows
Seems that the drivers in Vista_x64 worked for USB/Sync/RUU connection and the drivers in USB_MODEM_VISTA works for ADB connection. ADB is changed through Device Manager (Right Click 'Computer' > Manage > Device Manager).
TO ROGERS
mbk.2k3 wrote this so all credit goes to him! ..
to help the rogers folks: i had updated using the official Rogers update and thought i was stuck with the perfected SPL
I used the following method to get back my root (http://rootyourmagic32a.blogspot.com...htc-magic.html).
follow every step carefully.
then i downgraded radio and got an engineering SPL on using the following method (http://forum.xda-developers.com/showthread.php?t=605239)
i used adb shell heavily. it was daunting at first but once i got into it, it was smooth sailing and you build your confidence quickly (good for noobs like us)

will this get signature off so that i may use fastboot commands?

..
if u cant use fastboot commands it means you have a perfected SPL
this will root and and change SPL to an Engineers SPL
with an Engineer's SPL there will be no limitations

ah because i found people wich said that had a rooted phone with a sPL like the Eng but had Sig off. I already found some issues of some people here in XDA wich had that problem. It would be nice to encounter a solution for that.

..
i don't exactly know what u mean but this certainly works.. an i have used fastboot several times with it

How about for HBOOT-1.76.0007?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

it dont work for me

It does work. Its old news.
You are doing something wrong.

This works, I did it on a friend's 32A that had the 1.76.0009 perfected SPL a few days ago. This info was taken from the first post of the huge thread of people trying out methods for rooting the 1.76.0009 SPL. Good idea making a new thread, that last one was a clusterfuck and the first post had missing links lol.
BTW, you didn't need a goldcard for this? I went through the trouble of making a goldcard because the old thread's instructions included making a goldcard. That coulda saved me a bit of time, lol. And I used Cursordroid's custom 32A recovery image, so this method works with that recovery as well.
Also, typo: "Engeeneers SPL 1.76.0007" should be "Engineer's SPL 1.76.2007"

eyegor said:
It does work. Its old news.
You are doing something wrong.
Click to expand...
Click to collapse
Very long ago, thanks Orange_24

i did something wrong, it did work now

hade154 said:
i did something wrong, it did work now
Click to expand...
Click to collapse
translated my tutorial
http://translate.google.pl/translat.../showpost.php?p=94518&postcount=1&sl=pl&tl=en
Click to expand...
Click to collapse

..
Very long ago, thanks Orange_24
Click to expand...
Click to collapse
yea i just did this to maybe save some people from going thru the extra hours of searching ..
Also, typo: "Engeeneers SPL 1.76.0007" should be "Engineer's SPL 1.76.2007"
Click to expand...
Click to collapse
yea thanks for correcting the typo btw
BTW, you didn't need a goldcard for this?
Click to expand...
Click to collapse
i didn't make goldcard .. thats why i did the long search for finding a method that didn't require me to do it
Very long ago, thanks Orange_24
Click to expand...
Click to collapse
as i said.. just to make new thread with it and lower the search time.. that's why there was put in the Build a shrine for Orange_24 in there

This is not the way to breaking the SPL for all Countries - just in case.

I guys Im from Australia and I accidentally update my magic to the 3.05.861.2 rom which had the perfected 1.76.0008 SPL im am happy to say that this method actually root the spl which in favour lets you go back to either 1.33.2010 or 1.76.2007 whichever you prefer

glad that you found my thread then ^^..
yea.. but i dont know why u should go back to the 1.33?
1.76 are for the new rom's

^^ your right its better to stay on 1.76.2007 but i decided to try out CyanogenMod CM5.0.7 and i'm loving it

madshabz said:
^^ your right its better to stay on 1.76.2007 but i decided to try out CyanogenMod CM5.0.7 and i'm loving it
Click to expand...
Click to collapse
yea you are right. CyanogenMod are some very good roms. but when he removed market from his newer roms i went over and found some other roms

Rogers
The Rogers update uses this perfected SPL correct? If so glad that a workaround has been found finally.
Question though: can I go back and forth freely? ie. if i follow the steps, root my phone, try a new ROM, and later want to go back to the Rogers update.
Thanks in advance!

hey
The Rogers update uses this perfected SPL correct? If so glad that a workaround has been found finally.
Question though: can I go back and forth freely? ie. if i follow the steps, root my phone, try a new ROM, and later want to go back to the Rogers update.
Thanks in advance!
Reply With Quote
Click to expand...
Click to collapse
yea u can go back and foward between the roms. don't know if rogers are perfected spl but if it is u have to do this every time you want to switch away from rogers

HTC Magic , bricked, known solution?

Hello everyone. I need some assistance since i've tried everything and nothing is beeing possible. I've got a friend with a phone , he run the oficial HTC Magic Vodafone update, and happened that the system blocked at the update of system.img.
It had before acccording to the owner HTC RUU 1.88.531 Vodafone Edition (Do you know where i can find this RUU? )
Appeared this image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to root with orange root method, but doesnt let pass the system.img
i tried to reflash, doesnt pass the system.img
Tried to downgrade rom, doesnt get past the system.img.
Tried in fastboot (not possible perfect SPL)
Tried a ROM of another country same brand. Not possible either.
Doesnt let me flash from Hboot on SD card either. (Havent tried goldcard method yet)
Any suggestions? Thank you!

Far as 'brick' its not a true brick until you can no longer get into fastboot and also can't get into recovery. But far as RUU, not sure never had to deal with that, was it originally a vodaphone?
Exact details on what the device originally was may help, as opposed to trying everything in sight and risking actually creating a real brick.

I might be wrong, but that looks like an HTC Magic prototype.

jgcaap said:
Tried in fastboot (not possible perfect SPL)
Click to expand...
Click to collapse
According info at screen can you post image when you use fastboot commands
Try download Amon_RA recovery last version for 32A magics
go to fastboot-mode (Turn off, then turn on by pressing Back + Power)
run:
Code:
fastboot flash recovery recovery.img
where recovery.img - last version of Amon RA recovery H (H = 32A)

http://forum.xda-developers.com/showthread.php?t=659403
A bunch of RUU's.

Doenst let me flash hboot but i'll try flash recovery again. I'll ask my friend to try this, but i remembered to he try go into the android recovery mode, when he presses home+power, it appears this screen. But we'll try again =p
Accoridng to my friend , he bought this phone to another person. I can provide anything you might need to help analyse, such as SN etc.
He said this was a Vodafone Magic from Portugal, a 32A. (I personaly ever saw a DVT 32A , only 32B, and in my opinion he flashed wrong ROM beside of letting beeing flashed when goes to flash the system.img it gives an error saying isnt possible to writte).
I tried to download from the RUU list 3 Roms, none of them worked, all gave id error. I tried from HTC portugal, there are 2 situations:
1) flashing a 3.405xx , he flashes Hboot, radio, but at system, he gives error
2) Flashing a 2.3xx rom , he flashes System.img and stays there at 0 %
3)Flashing a 1.88.xx ROM he stays at 0 %
I was considering a brick .. but i'll wait your opinion thank you for this wonderfull assistance

I have exactly the same problem and I2m also stuck in the RUU screen. Moreover I also tried the goldcard method and it doesn't work either. I guess there is no solution yet for this problem. I even suggested 50 USD donation but still no solution.
http://forum.xda-developers.com/showthread.php?t=682444. This is my thread if there is a solution you may see there.

This usually happens when a 32B is flashed with the 1.76 SPL. Has been posted numerous times.
JTAG fixes this
Wrong forum by the way

one question, i know is possible to convert 32 A to 32B but not 32 B to 32A. But in wich conditions does this change the name in the bootload? Thank you

I had a similar heart stopping situation. I used a euro RUU (I'm on a Canadian Magic) with a gold card to fix it. From there I could root and flash back to what I wanted. Choose your RUU carefully and you can get it back.

thank you for your help i'll try this method tomorow Great support as always!

jgcaap said:
D
1) flashing a 3.405xx , he flashes Hboot, radio, but at system, he gives error
Click to expand...
Click to collapse
What exactly error did you have?
Note: If you are using RUU, it is creating log on computer (i forgot folder-name, something with ruu)

the phone is not mine i have to check once i'm with him. If creates a log, do you know wich folder is in?

jgcaap said:
the phone is not mine i have to check once i'm with him. If creates a log, do you know wich folder is in?
Click to expand...
Click to collapse
C:\ruu_log

I would love to know how to fix this too. Im in the exact same boat and everything. I know this is an old thread but seems this is the only person who has the same problem as me. Has there been a fix yet? Lets keep this alive and figure out how to fix this.

This morning I experienced the same thing, looking like a picture that you upload.
My solution is to install again via the PC with the correct RUU for your devices and my magic WORKED again..
you must be know your the correct RUU for your device

N204life said:
I would love to know how to fix this too. Im in the exact same boat and everything. I know this is an old thread but seems this is the only person who has the same problem as me. Has there been a fix yet? Lets keep this alive and figure out how to fix this.
Click to expand...
Click to collapse
What kind of phone do you have? Is it a 32A, 32B or does it have a 3,5mm audio jack on top? Please post your fastboot info here!
Go to http://shipped-roms.com/shipped/Sapphire/ and find the right RUU for your phone. Check if the RUU is for your phone! There's a thread on this forum explaining which ROM is for which phone - http://forum.xda-developers.com/showthread.php?t=659403
It might also be a good idea NOT to use a goldcard, so that you don't install the wrong one.

I have a mt3g with the 3.5mm jack and ive pretty much tried every RUU under the sun and nothing seems to make any head way. It keeps saying model ID error, and nothing ever starts loading. It will load the RUU onto the phone but dosent unpack anything
And everytime i try to do a fastboot boot of the RUU.zip it just stays there and says booting and nothing happens. It will show the green bar on the side of the phone when it loads and then nothing.
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-6.35.10.18
OCT 21 2009, 22:33:27

Oh, there's your problem: you're using the new radio (6.35) on a device that only works with the 32B one No wonder it won't boot!
Borrow a friend's phone, make a goldcard and follow the tutorial at http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
Without a goldcard I'm afraid you're pretty much stuck, sorry!
Bonus points: make a goldcard and use a RUU that's actually made for your phone to fix it Find the right RUU at http://forum.xda-developers.com/showthread.php?t=659403 under "T-Mobile myTouch 3G 1.2". This will take you back to the stock ROM, unrooting your phone.

So is the phone i need to make a gold card on just need to be running the android system or does it need to be an HTC or the exact same phone. I got a buddy with a moto backflip on at&t , wonder if i can do it on his

Vodafone UK HTC MAGIC Android 2.2.1 UPDATED Using Official AOSP 2.2 OTA Update

UPDATE : ISSUED YESTERDAY , i think i put the pressure on VodaFone in UK Forum HAHA http://forum.vodafone.co.uk/t5/Magic/Vodafone-UK-HTC-MAGIC-Android-2-2-1-UPDATED/td-p/513125/page/2
Android 2.2.1 (Froyo) is now available to Vodafone HTC Magic customers
Android 2.2.1 will give customers a number of improvements including: latest Gmail and Android Market clients; ability to save applications directly onto an SD card; support for USB tethering so the phone can be used as a modem; improved support for Active Sync Exchange (email, contacts and calendar sync); enhancements to Bluetooth; and enhancements to the camera. The update also includes the latest Google security patches.
How will customers get the latest software?
Customers' devices will receive an automatic notification when the update is available for their handset. They can then choose to accept the update by following the on screen prompts or perform it later.
The roll out of the software is phased, so not all customers will receive this notification at once.
Because it is quite a large update, we’d recommend customers carry it out over WiFi, although it is possible to download it over 3G or GPRS.
The update is a two step download which will be triggered by automatic notification to the customer's handset. The first step will change the bootloader. The second step will install FroYo after the phone has rebooted.
Checking software versions
To check which version of software the HTC Magic has:
1. Press the menu key, then touch "Settings", scroll down to and touch "About phone"
2. The software version will be displayed here
SOURCE: http://vodafoneuk.lithium.com/t5/Latest-Vodafone-News/Android-2-2-1-for-HTC-Magic/m-p/630265#M25
PLEASE CLOSE /DELETE THIS THREAD NOW AS IT IS NO LONGER REQUIRED AND HAS SERVED IT's PURPOSE.
FOR THOSE WHO USED THE METHOD BELOW TO UPGRADE PLEASE FEEL FREE TO DOWNGRADE VIA YOUR NANDROID BACKUP AND INSTALL VODAFONE UK UPDATES TO 2.2.1
Vodafone UK HTC MAGIC Android 2.2.1 UPDATED
I have had a successful Vodafone UK HTC MAGIC Android 2.2.1 UPDATE Using My Touch 3G Official AOSP 2.2 OTA Update and 2.2.1 OTA
METHOD :
Install Android SDK and ADB (Android Bebug Driver) Driver and enable usb debuging on your Magic (Menu Button> Settings> Applications> Development> USB Debugging[x] )
http://developer.android.com/sdk/win-usb.html
[ handy video that details most of the stages to give you some idea before hand (this is not a howto for this post but is to fimiliarise you with some of the same stages ) http://www.youtube.com/watch?v=1o2ujqazjcY ]
Root phone , so many ways just search here or google or follow that video above but remember our device is 32B
http://www.google.com/cse?q=htc+mag...ub-2900107662879704:fs7umqefhnf&ie=ISO-8859-1
Install recovery-RA-sapphire-v1.7.0G.img
http://forum.xda-developers.com/showthread.php?t=530492
I used flash_image on magic via terminal application installed on the phone method,Just google to find out how to add it.
Copy recovery-RA-sapphire-v1.7.0G.img to the root of your sdcard
start the terminal app on your phone
type su to get root
then type flash_image recovery /sdcard/recovery-RA-sapphire-v1.7.0G.img
or /system/bin/flash_image recovery /sdcard/recovery-RA-sapphire-v1.7.0G.img
depends where you put flash_image really
Made Nandroid backup via Recovery ( Power down phone, Home+Power button then Home and Power button to get menu)
Make sure you test your recovery is working, i made several just to be on safe side
Installed an engineering (s-OFF) SPL
http://forum.xda-developers.com/showthread.php?t=529019
I used Engineering SPL 1.33.2004
Checked via Fastboot that SPL was installed okay ( Power down phone, Power on + Back Button )
Check out this thread in case you have a perfected SPL (fastboot remote: not allow).I remember my first messing with my Magic a good while back and found i had this problem and had to make a gold card,but there are other methods
http://forum.xda-developers.com/showthread.php?t=548218
Followed My Touch 3G DOWNGRADE TO DONUT OTA:
http://forum.xda-developers.com/showthread.php?t=807899
Then Official AOSP 2.2 OTA Update from begining of this post also http://forum.xda-developers.com/showthread.php?t=807899
and after that once i setup Wifi an OTA 2.2.1 Popup box came up telling me there was an update so i said yes
Looks weard not seeing Vodafone Logo on boot now, seeing My Touch 3G Logo instead and My Touch 3G in any settings
MABEY someone who has the time can write a proper HOWTO UPDATE UK VODAFONE HTC MAGIC via this info
Lastly root your New Vodafone (now My Touch 3G) UK HTC Magic http://forum.xda-developers.com/showthread.php?t=803682
Install recovery-RA-sapphire-v1.7.0G.img
http://forum.xda-developers.com/showthread.php?t=530492
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cool Quadrant score ,now to try angrybirds without laggggggg
still a little lag but time to overclock and get faster class sd card plus whatever anyone else suggests to speed things up, i am new to android so suggesgions helpful

Could be that I'm silly, but how can it be an official Vodafone update if your phone is now called a My Touch 3g??

So, how does Angry birds perform?

Follow instructions , it is a method,not 1 file
gremsems said:
Could be that I'm silly, but how can it be an official Vodafone update if your phone is now called a My Touch 3g??
Click to expand...
Click to collapse
I didn't say it was an official Vodafone update but rather i said it was a method using official Updates,they just happen to be for My Touch 3G

2 x faster
eyegor said:
So, how does Angry birds perform?
Click to expand...
Click to collapse
2 times faster without any speed fixes or overclocking,still a little lag but much better

Oke, call me thick if you want, but I still don't understand why this is any more special than the other phones that have flashed 2.2.1
The means of getting the update on none mytouch phones was already known. What have changed, or not changed for that matter?
Sent from my T-Mobile myTouch 3G using XDA App

WHERE
gremsems said:
Oke, call me thick if you want, but I still don't understand why this is any more special than the other phones that have flashed 2.2.1
The means of getting the update on none mytouch phones was already known. What have changed, or not changed for that matter?
Sent from my T-Mobile myTouch 3G using XDA App
Click to expand...
Click to collapse
Where i have no seen any posts for Using Official AOSP 2.2 OTA Update on a UK HTC MAGIC
Google search " Official AOSP 2.2 OTA Update on a UK HTC MAGIC" and you will get tis post
No One has said anything on Vodaphone UK Forums about this for UK HTC MAGIC !!
Except ME

hagisbasheruk said:
Where i have no seen any posts for Using Official AOSP 2.2 OTA Update on a UK HTC MAGIC
Google search " Official AOSP 2.2 OTA Update on a UK HTC MAGIC" and you will get tis post
No One has said anything on Vodaphone UK Forums about this for UK HTC MAGIC !!
Except ME
Click to expand...
Click to collapse
Good for you.
EVERYONE already knows that a 32b magic could be updated to 2.2 because it is already stated so on page 1 of the 'official 2.2' thread! The fact that this is a UK Vodafone doesn't matter for on bit as it is a 32b, and so could be updated by anyone which had looked through de thread weeks ago!!
Great that you brought UK Vodafone updates to everyones attention, but like I said before, it's NOTHING new!!

if i have a stock soft rooted (universal androot) magic from vodafone, do i need to flash all those thinkgs before flashing the 2.2.1 official update???

em666 said:
if i have a stock soft rooted (universal androot) magic from vodafone, do i need to flash all those thinkgs before flashing the 2.2.1 official update???
Click to expand...
Click to collapse
Yes, as you need recovery-RA-sapphire-v1.7.0G.img installed via an engeneers SPL so you can do a Nandroid backup incase you want to go back or mess things up and as it complain's about signature, so you need to have engineers SPL so you can downgrade to the My Touch 3G DONUT OTA also
Add me @msn.com if you want help,
Back to studies, msg at weekend for help

Hey, looking for a bit of help.
Im new to all this kinda stuff but ive followed your guide up to installing an engineering SPL. Im having a bit of installing it. Ive moved the file to my sdcard and have tried to flash the zip via recovery but get hit with the following message:
-- Install from sdcard..
Finding update package...
Opening update package...
Verifying update package...
Installing update...
E:Error in /sdcard/update.zip (status 0)
Installation aborted
Click to expand...
Click to collapse
as i say im new to this.Am i making an obvious mistake here? I would appreciate it if you could give me an idiots guide

upthemorning said:
Hey, looking for a bit of help.
Im new to all this kinda stuff but ive followed your guide up to installing an engineering SPL. Im having a bit of installing it. Ive moved the file to my sdcard and have tried to flash the zip via recovery but get hit with the following message:
as i say im new to this.Am i making an obvious mistake here? I would appreciate it if you could give me an idiots guide
Click to expand...
Click to collapse
Add me to msn and i will go over each part with you
My username @msn.com
If you used Engineering SPL 1.33.2004 check the update.zip MD5 is : 1B49F0A53E147171E7C51F08510CF95F
http://www.winmd5.com/ WinMD5Free is a tiny and fast utility to compute MD5 hash value for files. It works with Microsoft Windows 98, Me, 2000, XP, 2003, Vista and Windows 7.
Check out this thread in case you have a perfected SPL (fastboot remote: not allow).
http://forum.xda-developers.com/showthread.php?t=548218

hi im on standard 1.6 firmware..... plz help me upgrade to 2.2....im totally new to this...

mod_786 said:
hi im on standard 1.6 firmware..... plz help me upgrade to 2.2....im totally new to this...
Click to expand...
Click to collapse
Add me to msn and i will go over each part with you
My username @msn.com

Thanks SO much for all your help!
Got my vodafone magic running 2.2 and i have to say im very impressed so far!! My handset seems to be running about twice as fast as it was with 1.6.
Id highly recommend anyone looking in doing this to their Vodafone magic. It seriously feels like a new handset!
Thanks again OP!

No Problem

how's battery in this rom?

change you splash screnn
i have a vodafone htc magic also, now that you have the ota why not change the ugly vodafone red splash screen look here
http://ostebaronen.dk/change-splash-screen-on-htc-magic/
also this rom i find is fast and the best so far
http://forum.xda-developers.com/showthread.php?t=848791

Thanks for the INFOs
fender1964 said:
i have a vodafone htc magic also, now that you have the ota why not change the ugly vodafone red splash screen look here
http://ostebaronen.dk/change-splash-screen-on-htc-magic/
also this rom i find is fast and the best so far
http://forum.xda-developers.com/showthread.php?t=848791
Click to expand...
Click to collapse
Thanks for the links , oh and by the way it's an Ugly Green MyTouch 3G logo now but not for long.
Will give the [ROM] [32b] [Themed] T-Mobile myTouch 3G OTA Froyo 2.2.1 ROM
A blast later, thanks whats the prerequisites for installing and method of install ?

Awesome
nutweevil said:
how's battery in this rom?
Click to expand...
Click to collapse
Awsome , fully charged @ 6pm and @ 8am went my alarm went off 96% left
Now @ 5.30 PM next day 67% and i have made loads of long calls /wifi and 3g data