Related
hi there, could anyone tell me if is posible flash rom on my uni if i have windows vista on my laptop.
Ps:is posible control laptop with desktop remote? how to set it up?
thanks
zatkojuraj said:
hi there, could anyone tell me if is posible flash rom on my uni if i have windows vista on my laptop.
Click to expand...
Click to collapse
Read this thread, please.
http://forum.xda-developers.com/showthread.php?t=313001
Vista 64 and flashing
Does anyone have 64 bit drivers for the Universal so I can flash with my Laptop?
I'm also having problem....
moeaboelela said:
Does anyone have 64 bit drivers for the Universal so I can flash with my Laptop?
Click to expand...
Click to collapse
and
duanes said:
O.k. for everyone who's traying to Flash in Vista
Donwload the files from this link: http://rapidshare.com/files/38401715/Manual_and_files.rar.html
and extract them in a new created folder like for example your desktop. Extract the USB Modem Vista in a different folder on your desktop (easy to find)
- put your device in bootloader mode (press and hold power, light and softreset button)
- connect the MDA to your computer.
- open computer management (devicemanager) in vista, rightclick computer in startmenu and select manage (see step 1)
- in computermanager open devicemanager (step 2)
- follow step 3 and 4.
After step 4 browse to the folder where you extracted the USB Modem Vista and choose next.
It will install the active sync drivers to vista and you will be able to flash.
I attached a exit bootloader file to exit bootloader mode (you can also install drivers without flashing the device)
YOU ALWAYS HAVE TO EXIT BOOTLOADER MODE!!!! EVEN BEVORE FLASHING!!!!
If you do it properly it will be done in less than 4 minutes.
Good luck.
Duanes
excuse my poor english
Click to expand...
Click to collapse
i've tried these process and no luck it says letest version is already installed and i'm running vista 64 bit and if there is any other way i'll be greatful and any help will be appriciated......
Its always better on XP
But Vista method works just great
Can you Share the method to do it...
orb3000 said:
Its always better on XP
But Vista method works just great
Click to expand...
Click to collapse
Can you please tell me which way coz i can not flash with Vista. i also tried some methods listed above but no luck.... if you know any methods then can you share , i and lots of people here will be greatful....
Thanx
rajivshahi said:
Can you please tell me which way coz i can not flash with Vista. i also tried some methods listed above but no luck.... if you know any methods then can you share , i and lots of people here will be greatful....
Thanx
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=313001
Thread since 2007
Just do a little searching
Good luck,
Sorry but i have already tried this
orb3000 said:
http://forum.xda-developers.com/showthread.php?t=313001
Thread since 2007
Just do a little searching
Good luck,
Click to expand...
Click to collapse
hi i have tried that almost 30-40 times with no luck... everytime i try it says it couldnot be installed as the latest version is already installed....
i'm running vista home premium and 64bit processor...
Am i suppose to uninstall WMDC before this procedure or what ????
Sorry again for disturbing you...
rajivshahi said:
hi i have tried that almost 30-40 times with no luck... everytime i try it says it couldnot be installed as the latest version is already installed....
i'm running vista home premium and 64bit processor...
Am i suppose to uninstall WMDC before this procedure or what ????
Sorry again for disturbing you...
Click to expand...
Click to collapse
Try to unistall WMDC and then reinstall and then do the sync in that order
Hope it helps,
Driver for Vista 64bit
Here is the driver for Vista 64 bit..
http://www.filedropper.com/x64wce
cheers
Rajiv
is there a way to install the sdk phone tools on xp? I have the 6.1v and visual studios 2010. But when i try to install it says i have to have win7 or vista, and i cant put win7 on machine cause it only has 128m ram. I have a patch file that is suppose to let ya install but haven figured out how to yet.
There are ways to get it installed but the emulator requires Directx 10 so that's not going to work. Without the emulator all you can do is write and compile code but not test to see if it works or not. Not very useful.
XP barely runs on 128mb of RAM so I imagine Visual Studio would be absolutely miserable to use if usable at all.
If you wanna develop for WP7 I guess its safe to say it time for an upgrade.
i would say so as well. even a netbook has more capabilities than that
Im not much of a developer in some ways so as for now all im wanting to do is use the toms installer or the reg sdk deployment tool witch i have but when i try to launch program i get this error:
Could not load file 'Microsoft Smart Device.Connectivity,10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its
dependencies. The system cannot find the file specified.
Then when i try to install the Microsoft XNA Game Studio 4.0 windows phone from the WPDT_RTM_en_iso
i get this error: Microsoft xna game studio4.0 phone ex require visual 2010 or WPDT. install the required app and then relaunch setup. " witch i have the visual studio 2010 installed"
and i have a win7 netbook but have managed to have a kid that spilled tea on it so am trying to figure out the way to do this untill
i can afford to get another netbook.
Thanks for the help and replies guys, very appriciated!!
Ok so I got the xna game studio 4 to install but still getting the phone device connectivity error, is there something I can download to get by this and use the deployment
guess no solution huh
i don't believe so. the way i did it was to use a virtual machine so i could get the phone emulator working on an xp machine (virtual machine has windows 7 on it). but you don't have enough ram for that. you need at least 1.5gb dedicated to the virtual machine alone.
You can try this solution here http://forum.xda-developers.com/showpost.php?p=9618980&postcount=81. I just couldn't get it to install still as I kept getting an error saying could not install the following component .NET Framework 4 Multi-Targeting Pack.
i finally found a iso file and downloaded it then opened up the baseline.dat file and edited it according to the patch settings and everything works just like it does on win7 netbook, just wanted to see if it was possible and it is!
Thanks for the replies.
Could you share that info? Ive been dying to get SDK tools on my XP... Thanks
jasontac said:
i finally found a iso file and downloaded it then opened up the baseline.dat file and edited it according to the patch settings and everything works just like it does on win7 netbook, just wanted to see if it was possible and it is!
Thanks for the replies.
Click to expand...
Click to collapse
Can you please share that? I have 4 XP computers at home and neither of them can run it. It would be great as I need the SDK to run Chevron unlocker! Thanks!
Link pleaseee
I so desperately need this also
for those that want the tools on windows xp, here you go: http://blogs.msdn.com/b/astebner/archive/2010/05/02/10005980.aspx
I finally got it to install on XP!
Here's what I did,
Download the .iso file (it's at the bottom of the page) :
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=04704acf-a63a-4f97-952c-8b51b34b00ce
After, make a new folder on your desktop and extract the ".iso" file into the folder.
Next, I grabbed the ".zip" file from here, : http://forum.xda-developers.com/showpost.php?p=9618980&postcount=81
Take the baseline.dat from the .zip file and replace it in the one with the extracted .iso files. Then just run setup.exe from the file. It should work! But make sure you have about 3 gb free from your hard drive. And emulator doesn't work, but I'm sure its fine if your not a developer.
Remember to hit the thanks button if it worked for you!
Do not use these instructions anymore, Microsoft FINALLY fixed it, look here
....
HTC Driver Install Instructions
Go to Desktop, press Windows key + R, type in "shutdown.exe /r /o /f /t 00" and click OK.
Now click on Troubleshoot, then click Advanced Options then Start Up Settings.
Now click Restart. Let the PC restart and press either the number 7 or F7.
Download this and install it.
Wait for it to finish and then reboot and enjoy
Make sure you plug your phone into a USB 3.0 port EVERY Time when using Fastboot
....
If you have any problems with your USB 3.0 port afterwards and want to return it to original driver, follow these steps to return to your original driver
Press Windows key + R, type in "devmgmt.msc" and click OK.
Expand Universal Serial Bus Controllers.
The USB 3.0 port is listed as "AMD USB 3.0 Host Controller", double-click on it and select the Driver tab, click "Roll back driver" and select Yes.
Restart your computer
Thanks for sharing
Sent from my HTC One S using xda app-developers app
dd98 said:
Today I present to you a fix for fastboot on Windows 8.1 x64 on Intel and AMD machines with USB 3.0. This will NOT work on USB 2.0. This should work if you follow instructions exactly. I am not responsible if anything goes wrong and/or breaks. The Intel fix is NOT mine I'm just posting it here for convenience (Original Intel tutorial here)
All credits for the Intel solution go to the people here
Please hit the thanks button if it helped
Click to expand...
Click to collapse
im getting an error when extracting the amd fix zip
try 7zip or winrar to extract
dd98 said:
try 7zip or winrar to extract
Click to expand...
Click to collapse
Went nuclear and am installing Ubuntu as we speak... But as soon as it's done I'm going back to try this... I simply used whatever decompressor is in win explorer, even though I have both 7zip and winrar..... (Forehead smack) :silly:
i uploaded folder to mega so here you go: https://mega.co.nz/#F!C0gQSQCC!VixiF0rMM71qXVzXeWS5KA
dd98 said:
i uploaded folder to mega so here you go: https://mega.co.nz/#F!C0gQSQCC!VixiF0rMM71qXVzXeWS5KA
Click to expand...
Click to collapse
i truly appreciate you taking the time to do that for me.. truly!
however, since going to dualboot linux ive solved all those problems... have new ones now though
No radio, no firmware it seems... have a rom that boots but no way to connect..
Achieved S-OFF trying to fix it but no... nothing works... should i be using a sense rom?
thanks again!
you shouldnt need a sense rom, why dont you download amd fix.zip in ubuntu, extract it and move the files to your windows partition and then try to fix your usb then try running an ruu
try to fix adb on linux try this
1. Open terminal
2. type this: sudo gedit /etc/udev/rules.d/51-android.rules and hit enter
3. considering your phone is htc type in the following on the text editor window: SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", MODE="0666", GROUP="plugdev"
4. save the file and restart your computer
or if this didnt work try this: http://androidonlinux.wordpress.com/2013/05/12/setting-up-adb-on-linux/
Morning gents,
Got my ONE yesterday and obviously trying to unlock when I hit this roadblock. I tried the intel fix above earlier this morning and last night. I was able to get the intel drivers to take, but lost all of my usb ports in the process and had to roll back. As soon as I accept the first intel driver for the eXtensible controller, all peripherals are dead. Am I missing the obvious here??
I've spent more time trying to get my old pc (with Win 7) up and going than trying to fight 8.1 into submission. Naturally the HDD on that unit is dead now. CURSES!
What is the forecast for a solution on this? Is it a windows update or just waiting for an HTC driver update?
Thanks for any guidance.
thanks a ton worked wonders :laugh:
Microsoft knows about this, but doesn't seem willing to provide a general fix. Ultimately the problem is that Microsoft added an extra validation to device registration that HTC devices don't seem to honor. They're releasing an update to fix particular devices, but we don't yet know if end users will be able to edit the white list.
http://blogs.msdn.com/b/usbcoreblog...8-0-but-fail-on-windows-8-1-with-code-43.aspx
Sent from my One S using xda app-developers app
I have windows 8 32 bit. I would like to know if i will have problem when i will update windows to 8.1 32 bit. My computer have only usb2.0 ports
The problem exist only with usb3.0 port or i wil have it also with 2.0?
thanks
The problem exists with USB 2.0 ports as well. The reason that the "fix" posted works for USB 3.0 ports is because it uses Intel's USB 3.0 drivers for Windows 8 to work around the problem. There's also "fixes" floating around that involve rolling back to Microsoft's Windows 8 USB drivers to make it work.
If you don't have another PC that you can use to do things in fastboot, stick with Windows 8 until a proper fix is available.
Thanks... Finally I can Fastboot on Win 8.1... :good:
I can't install the driver update...getting an error that states "The system cannot find the file specified".
are you sure you read the note at the start and followed the instructions EXACTLY
dd98 said:
are you sure you read the note at the start and followed the instructions EXACTLY
Click to expand...
Click to collapse
The only thing I did any differently was to download the files before the reboot. I can't imagine that makes a difference but please correct me if I'm wrong. I validated all aspects of the initial note, still no luck. Again, I'm trying the AMD fix.
Likeachampion3 said:
I can't install the driver update...getting an error that states "The system cannot find the file specified".
Click to expand...
Click to collapse
Same problem here
Hi,
I have uploaded a working version of Win86emu 0.6 ready for working in Windows RT 8.1 with jailbreak: http://www45.zippyshare.com/v/iMffGf8P/file.html
Instructions:
1. Extract all files to c:\ (it will create a x86node folder)
2. Execute c:\x86node\install\x86node.reg
3. Run c:\x86node\windows\postinstall.exe
4. For Windows 8.1, copy c:\x86node\Install\Windows 8.1\x86node\Windows\SystemNT\ntdll.nt.dll to c:\x86node\Windows\SystemNT\ntdll.nt.dll and override the current dll.
After this, you can run c:\x86node\windows\launcher.exe and choose a x86 exe to run (e.g. c:\x86node\windows\regedit.86.exe)
Edit: I forgot step 4
Attempting to run anything results with this error
The procedure entry point RtlConvertUiListToApiList could not be located in the dynamic link library C:\x86node\Windows\SystemNT\ntdll.nt.dll
This error comes up a few times after clicking through the application may actually run but wont function as intended.
Winamp 2.95 Installs, runs and plays Mp3's
CPU usage is around 13% idle 260MB ram usage
VLC 0.7.2 installed, runs in a command line only, wont play anything.
aq3e said:
Attempting to run anything results with this error
The procedure entry point RtlConvertUiListToApiList could not be located in the dynamic link library C:\x86node\Windows\SystemNT\ntdll.nt.dll
This error comes up a few times after clicking through the application may actually run but wont function as intended.
Winamp 2.95 Installs, runs and plays Mp3's
CPU usage is around 13% idle 260MB ram usage
VLC 0.7.2 installed, runs in a command line only, wont play anything.
Click to expand...
Click to collapse
Yes, I forgot the forth step. I have edited the info.
lots of unhandled exceptions when I try to run exe files
Qiangong2 said:
lots of unhandled exceptions when I try to run exe files
Click to expand...
Click to collapse
Have you tried to run the included regedit.86.exe file?
yopablo said:
Have you tried to run the included regedit.86.exe file?
Click to expand...
Click to collapse
Yes, It works fine
Qiangong2 said:
Yes, It works fine
Click to expand...
Click to collapse
Then, win86emu should be working ok. Not every app is supported. Check this thread http://forum.xda-developers.com/showthread.php?t=2259449 for compat suggestions
I know, but it would be nice if you could include msu.dll that's the main problem (if it's possible to include)
Is this still being based off of ReactOS?
Edit: yes it is, too bad we couldn't get mamaich back on board to continue their development of this.
[Removed]
The game.com emulator works perfectly on win86emu I don't know if I'm allowed to post it, but you can find the emulator on google with all of the roms and the instructions to use it have fun!
windows rt sound
Someone knows how to run cubase with a Emu??? Please help me
Error
I can't open .exe files on my RT 8.1 I have done as was shown.....
Hi,
I am getting an error : "Windows cannot verify he digital signature for this file" .
Does anyone know of a solution??
NinaLaRebel said:
I can't open .exe files on my RT 8.1 I have done as was shown.....
Click to expand...
Click to collapse
Jailbreak or enter test mode.
hey guys,someone know how to run starcraft with win86emu? When i try i get error
---------- Post added at 09:59 PM ---------- Previous post was at 09:55 PM ----------
Hey guys,someone know how to play starcraft with win86emu?
Hi, i have a lumia with windows rt, i am trying to run chrome or firefox or opera but the compatibility set is to old (windows xp sp3), do you know how to properly change reg entries for a newer compatibility?
Thank you for this, it works surprisignly well.
Hello, I've downloaded the files and tried moving them around and have encountered a couple of issues that stop me from going forward.
1. I wasn't able to move all the System32 dll files. It said I didn't have permission.
2. After running the after install file I was told that the file ""Windows cannot verify he digital signature for this file" .
My boss wants to get Google Chrome on the Windows RT. I think I've seen in a video that a guy was able to get Chrome on his RT, but he didn't elaborate on the process.
Any and all replies are appreciated. Thank you
Ikupasuy said:
Hello, I've downloaded the files and tried moving them around and have encountered a couple of issues that stop me from going forward.
1. I wasn't able to move all the System32 dll files. It said I didn't have permission.
2. After running the after install file I was told that the file ""Windows cannot verify he digital signature for this file" .
My boss wants to get Google Chrome on the Windows RT. I think I've seen in a video that a guy was able to get Chrome on his RT, but he didn't elaborate on the process.
Any and all replies are appreciated. Thank you
Click to expand...
Click to collapse
Chrome does not run on RT and it never will
Welcome to my tutorial !
You can find others tutorials related to the Cube i6 :
Update your EFI BIOS
Install Android 4.4.4 (Stock & RemixOS)
Disclamer: This process might contain ROM hacking, this is for advanced users.
Software included may be subject to copyright.
Flash your device at your own risk. Developer is not responsible for what you do on your device.
What you need:
Cube i6 Air (3G or Wifi)
2 Flash Drives (1Gb or more, and 4Gb or more)
OTG cable
USB Hub (3 Ports recommended)
WinPE for Win10 (Downloadable on my drive)
Win10 32 bits ISO (link in tutorial)
THIS IS THE LINK I'M REFFERING TO WHEN SAYING "THE DRIVE"
https://drive.google.com/folderview?id=0B8YPw4HjmqNCZktOZy1OTEN2ZVE&usp=sharing
What to do :
1.) Start by plugging the first usb drive (1Gb or more) into your computer, and format it to FAT32 using any formatting tool,
MAKE SURE YOU CHANGE PARTITION TABLE STYLE TO GPT, EITHER YOU WILL END UP WITH ERROR ON WINPE INSTALL
2.) Now you need to download WinPE from the drive, go to your device folder, then go into the windows folder, and download it.
Once you downloaded it, uncompress. You will find a "WinPE_XX" folder inside, take all of its content, and extract it to your freshly formatted drive.
Heres what looks like the root of your key:
3.) Your USB Install Drive is ready. You can plug it off and save it for later.
You now need to download a 32Bits ISO version of windows, if you already have one, it should work, if you don't, you can download it from Microsoft Website
4.) Now take your downloaded ISO, and mount it with either windows, daemon tools, PowerISO, or any Disk Image Manager.
Once mounted, you need to navigate to the X:\sources\ folder, and extract "Install.wim" anywhere on your PC. Thats the windows system we will install.
5.) Go to the drive, into your device folder, go to windows folder, and download the "Image_Recovery_Extra.zip" you can find there.
It contains recovery + Files mandatory for install (because the Windows PE we're using is hacked from Cube).
6.) Take your second USB Drive (of 4Go minimum, it needs to hold windows), and format it to NTFS Filesystem with any formatting tool.
Now you can extract the "images" folder of the previously "Image_Recovery_Extra.zip" downloaded (KEEP THE IMAGES FOLDER THIS TIME)
And also copy inside that "images" folder your previously extracted Install.wim image file.
7.) You're good to go ! You can unplug the keys from your PC, and start working on the tablet as of now !
You need to boot to BIOS settings, using "ESC" key at startup of tablet. Once there, go to SCU Settings, the bottom right square.
You need to set your primary boot to "Windows" in the boot tab, or the key won't boot. If it is already, you can exit SCU and start step 8.
If it is not, just select it, then press F10. Tablet should reboot. Press ESC again at startup, and start step 8.
8.) Now everything is straightforward: Just select "Boot from EFI File", select your USB key in the list, and go to EFI folder, then go inside BOOT folder, and select "Bootia32.efi"
The tablet should boot to a command prompt (it lags much, but we will install drivers later) and it should install windows automatically then shut down.
If install fails, update your BIOS and try again or post here for some help.
Preparation looks like this:
Working device looks like this:
9.) Now you can get rid of the installation USB keys, you only need mouse and keyboard. Fire up your tablet freshly flashed, it should boot to a chinese logo with a circle under it. it might reboot a few times, it is actually expanding filesystem and populating your win10 install. Wait until you end up in language screen. if it shuts down, put it on again if it does not automatically.
10.) Windows is ready, now follow the instructions, language, set your name, until you end up on the windows desktop. When you are here, you need to download from the drive the Driver Package for windows 10, which is located inside the driver folder, inside the windows folder of your devices folder. It sould be named "Z37XX_CPU_Chipset.zip"
Extract it on the tablet, and run the included "Setup.exe". When finished, reboot your tablet.
you can also find various driver i added for os switch and gyrometer
Congrats! You successfully Installed Windows 10!
I do not guarantee it works on every device, nor with every windows version, but it works in my installation with a regular Win10 x86 Pro.
There might be some upgrades to do, as I personnally hacked the WinPE that is available on Cube's site, with Windows 10 ADK WinPE,
so feel free to report bugs, enhancements to this method. and report cube for not doing this so far !!!
Regards,
Max.
Top! Thank you!
I had exactly the same issue and want to fix it this weekend. My I6 arrived on Thursday. Now I follow your instructions to update to Windows 10.
Hi, glad it is helping! tell me if you are having issues, or if some steps aren't detailed! i'll upload some photos later. if you need something for this tablet feel free to ask
regards
stalker2106 said:
Hi, glad it is helping! tell me if you are having issues, or if some steps aren't detailed! i'll upload some photos later. if you need something for this tablet feel free to ask
regards
Click to expand...
Click to collapse
Hey Max,
now I have the first problem.
On my Windows 10 Image I do not have any install.wim file. There is only a install.esd (about 2GB) file in the \sources\ folder. But this file is not possible to extract with 7zip. The only *.wim file in the directory is the boot.wim. What have I to do?
scharrrfi said:
Hey Max,
now I have the first problem.
On my Windows 10 Image I do not have any install.wim file. There is only a install.esd (about 2GB) file in the \sources\ folder. But this file is not possible to extract with 7zip. The only *.wim file in the directory is the boot.wim. What have I to do?
Click to expand...
Click to collapse
Alright, i don't know what ISO of windows 10 you have, but i found a tutorial on how to convert esd to WIM, so no worries (http://www.intowindows.com/how-to-easily-convert-install-esd-to-install-wim/) furthermore, i would recommend using PowerISO for extracting the file, as i'm not aware of how to extract from ISO with 7zip
Okay, thank you. With this it works
But I have some error when I boot the WinPE on step 8. I get the message: "The boot configuration data for your PC is missing or contains errors" File: \EFI\Microsoft\Boot\BCD Error code: 0xc000000f""
On this point the tablet do not recognize any keyboard command.
scharrrfi said:
Okay, thank you. With this it works
But I have some error when I boot the WinPE on step 8. I get the message: "The boot configuration data for your PC is missing or contains errors" File: \EFI\Microsoft\Boot\BCD Error code: 0xc000000f""
On this point the tablet do not recognize any keyboard command.
Click to expand...
Click to collapse
What is that \EFI\Microsoft\Boot\BCD you are trying to boot from ?
You should select \EFI\Boot\bootia32.efi. If it does not work make sure your BIOS is at version 206 (its my case, so i guess it can be this) and if not, upgrade it with the provided tutorial, maybe you'll have more luck with that ? You can check its version on android by going to device info in settings and check IFW Version.
EDIT: The WinPE media might be trying to access your hard drive EFI folder to use its BCD configuration, check that too, maybe you can format that EFI partition before booting to winpe ?*
EDIT2: Check BCD integrity maybe, 262 144 bits is what it weights on my side
stalker2106 said:
What is that \EFI\Microsoft\Boot\BCD you are trying to boot from ?
You should select \EFI\Boot\bootia32.efi. If it does not work make sure your BIOS is at version 206 (its my case, so i guess it can be this) and if not, upgrade it with the provided tutorial, maybe you'll have more luck with that ? You can check its version on android by going to device info in settings and check IFW Version.
EDIT: The WinPE media might be trying to access your hard drive EFI folder to use its BCD configuration, check that too, maybe you can format that EFI partition before booting to winpe ?*
EDIT2: Check BCD integrity maybe, 262 144 bits is what it weights on my side
Click to expand...
Click to collapse
I do not know, why it says \EFI\Microsoft\Boot\BCD. I selected the correct .efi-file.
But I think my tab is now gone. I have try the bios update from 203 to your 206. It have flash completed to 100% and turns the tablet off. I wait a few minutes and then I try to turn it on again for another try to install Windows 10. But it will not turn on again. It does also not recognize the charger anymore. I think I brick the i6 with the 206 Bios. What a bother!
scharrrfi said:
I do not know, why it says \EFI\Microsoft\Boot\BCD. I selected the correct .efi-file.
But I think my tab is now gone. I have try the bios update from 203 to your 206. It have flash completed to 100% and turns the tablet off. I wait a few minutes and then I try to turn it on again for another try to install Windows 10. But it will not turn on again. It does also not recognize the charger anymore. I think I brick the i6 with the 206 Bios. What a bother!
Click to expand...
Click to collapse
Ok, if the process went 100%, then there is a high probability it is not bricked.
Remember that still, you can boot using DnX mode holding power and volume +.
What do you mean by "it does not recognize the charger" ? when you plug it, the charging led does not light up ?
Thats very odd. because its not controlled by bios but only hardware derivation I guess.
please keep me tuned in on that !!
Edit: FYI I used the exact same BIOS on my model, which is a i632GB15378650186.
stalker2106 said:
Ok, if the process went 100%, then there is a high probability it is not bricked.
Remember that still, you can boot using DnX mode holding power and volume +.
What do you mean by "it does not recognize the charger" ? when you plug it, the charging led does not light up ?
Thats very odd. because its not controlled by bios but only hardware derivation I guess.
please keep me tuned in on that !!
Edit: FYI I used the exact same BIOS on my model, which is a i632GB15378650186.
Click to expand...
Click to collapse
DnX mode does also not work. And yes i mean, that the LED does not light up at all.
My model is i632GB15224920293. I think it is an older one.
scharrrfi said:
DnX mode does also not work. And yes i mean, that the LED does not light up at all.
My model is i632GB15224920290. I think it is an older one.
Click to expand...
Click to collapse
Wow. You mean there are older model with other BIOS System ?
I'm so unhappy to hear your story. I hope i can help to fix it !
Whatsoever, how can any BIOS accept flashing itself if its not corresponding ?
Good thing you point out there, but c'mon, how can your tablet be bricked if the process went OK...
Maybe you can contact cube about it ? Maybe if you hold power long enough it will turn off ?
Once the tablet did this to me, had to hold power 10s to get it back off !
EDIT: good thing I remember is that i had it shipped with 205 BIOS, so i guess you're right and its an older model you have. Still, I have spare BIOS Firmware 204 that I flashed for testing purposes that also worked flawlessly !
EDIT2: found that there might be tons of differents models like raspberry pi, look this one does not match with any of ours : http://winphonetech.com/wp-content/uploads/2015/08/cube.jpg or maybe it is just a serial number generated from the # produced or the current date of prod ?
stalker2106 said:
Wow. You mean there are older model with other BIOS System ?
I'm so unhappy to hear your story. I hope i can help to fix it !
Whatsoever, how can any BIOS accept flashing itself if its not corresponding ?
Good thing you point out there, but c'mon, how can your tablet be bricked if the process went OK...
Maybe you can contact cube about it ? Maybe if you hold power long enough it will turn off ?
Once the tablet did this to me, had to hold power 10s to get it back off !
EDIT: good thing I remember is that i had it shipped with 205 BIOS, so i guess you're right and its an older model you have. Still, I have spare BIOS Firmware 204 that I flashed for testing purposes that also worked flawlessly !
EDIT2: found that there might be tons of differents models like raspberry pi, look this one does not match with any of ours : http://winphonetech.com/wp-content/uploads/2015/08/cube.jpg or maybe it is just a serial number generated from the # produced or the current date of prod ?
Click to expand...
Click to collapse
Yes, I think you are right, that the last numbers are any kind of a serial number. Do you have another Bios file? On the web I found only the 201. I can try to buy an ISP programmer and reflash the tablet.
And I have tried different buttons combinations on hold in hope that the tablet wake up again. But still nothing
scharrrfi said:
Yes, I think you are right, that the last numbers are any kind of a serial number. Do you have another Bios file? On the web I found only the 201. I can try to buy an ISP programmer and reflash the tablet.
And I have tried different buttons combinations on hold in hope that the tablet wake up again. But still nothing
Click to expand...
Click to collapse
Thats some freaking bad news ...
I uploaded 204 BIOS to the drive... cheers, fingers crossed.
It's a great news that the I6 Air is possible to upgrade to Win10 now. But before taking action, I have one question to clarify. After the upgrading, is the Android system still there and can switch over freely as before?
dahuzi said:
It's a great news that the I6 Air is possible to upgrade to Win10 now. But before taking action, I have one question to clarify. After the upgrading, is the Android system still there and can switch over freely as before?
Click to expand...
Click to collapse
Yeah, windows fill the partition space that is already configured, it means even if you resized your android to a 8 Gigs partition, the windows will not erase it !
For the switching process, it is even better because YOU install the switcher, and configure it the way you want (dektop shortcut, taskbar button, ...)
I can bring windows screenshots on purpose if needed
regards,
Stalker2106.
stalker2106 said:
Yeah, windows fill the partition space that is already configured, it means even if you resized your android to a 8 Gigs partition, the windows will not erase it !
For the switching process, it is even better because YOU install the switcher, and configure it the way you want (dektop shortcut, taskbar button, ...)
I can bring windows screenshots on purpose if needed
regards,
Stalker2106.
Click to expand...
Click to collapse
Thanks for clarification, another question, how about the system activation? Will the system become activated automatically?
And moreover, the drive folder you provided has no more WinPE available. Please check.
Thanks again.
dahuzi said:
Thanks for clarification, another question, how about the system activation? Will the system become activated automatically?
And moreover, the drive folder you provided has no more WinPE available. Please check.
Thanks again.
Click to expand...
Click to collapse
Hi, bad manipulation yesterday led me to delete archive from drive, but its uploading again !
I tried again the tutorial because of the problem of " scharrrfi" to check if its not broken in any manner, and it worked flawlessly !
Furthermore, the system is yours, and therefore, is not activated by default, it asks for a serial key !
Files should be on the drive later today
EDIT: The files are up on the cloud !
Now I wait for my ISP programmer. But I know, why I get first the message "The boot configuration data for your PC is missing or contains errors" File: \EFI\Microsoft\Boot\BCD Error code: 0xc000000f"". I found the solution in another forum. There was a problem with the formatting of my USB stick. I have to format it with an partitioning tool to GPT. And then it should work.
If I know this before, I have not to try to flash the bios...
scharrrfi said:
Now I wait for my ISP programmer. But I know, why I get first the message "The boot configuration data for your PC is missing or contains errors" File: \EFI\Microsoft\Boot\BCD Error code: 0xc000000f"". I found the solution in another forum. There was a problem with the formatting of my USB stick. I have to format it with an partitioning tool to GPT. And then it should work.
If I know this before, I have not to try to flash the bios...
Click to expand...
Click to collapse
Yeah, I admit that was kind of my fault telling you that upgrading your bios would change anything in your boot configuration, i'm so sorry
Let's hope this will work, still hope, windows 10 will make its way to your tablet no worries !
After some days of using it i report some glitches though:
Orientation sometimes get rekt, i dont know why but you have to set it manually...
Also the tablet is not as responsive as it is on android, but I guess power consumption is higher on windows, as it heats much more !
Sometimes i touch the part near the lens and it feels really hot !
Btw when on low battery, the power saver settings got me doubling my battery time, which is nice !
And on idle, locked, the battery charge way faster than on android.
Hi I have an other error - if I boot with the bootia file I got short 4 error messages: UEFILINUX ERROR [uefi_get_battery_status:121] Failed to get battery status - und error 160, 121 again and 149, all error with the battery. I haved update the firmware from 201 to 206. The battery is over 90% full in windows. Have you an idea whats wrong?