i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?
and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><
Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.
thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.
thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!
um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..
No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.
i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?
make hard reset after flash firmware!
yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.
llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.
Safe
Thanks guys, you saved my S200
Matos
Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!
Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope
hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice
hi all...i'm new here and also i don't know much (almost nothing to be honest) about smarphones even if i have 3
my question is...what i can do to fix this problem if i can't connect the phone to pc through activesync??
here's my problem...or how my problem apear
1. i have wm 6.5 on my asus p565 (worked fine from last year...except few little issues i didn't care) and wanted to install few programs...some i knew and some i didn't and wanted to see what they do...until i got to " nimbuzz " and after i installed it it asked me to restart my phone in order to work...now the problem is that after that all i can see is the asus logo from start when the phone open and from when wm shoul start it stay black and can't do nothing
2. also can't connect to activesync and from what i have heard i need to activate this first from my phone in order to work...in other words i can't install nothing and with this i mean especially firmware/roms
hope someone can help me with this...if anyone need more info about anything let me know and i'l give you all you need thanks to all in advance for all the help
PS...sorry if my english is not so good and hope you all understand what i said...and if my post is in wrong "place" sorry...move it where u think it should be
~~~~~~~~~~~~~~~~
FIXED ..all working now...so no more help needed
Mortymen said:
hi all...i'm new here and also i don't know much (almost nothing to be honest) about smarphones even if i have 3
my question is...what i can do to fix this problem if i can't connect the phone to pc through activesync??
here's my problem...or how my problem apear
1. i have wm 6.5 on my asus p565 (worked fine from last year...except few little issues i didn't care) and wanted to install few programs...some i knew and some i didn't and wanted to see what they do...until i got to " nimbuzz " and after i installed it it asked me to restart my phone in order to work...now the problem is that after that all i can see is the asus logo from start when the phone open and from when wm shoul start it stay black and can't do nothing
2. also can't connect to activesync and from what i have heard i need to activate this first from my phone in order to work...in other words i can't install nothing and with this i mean especially firmware/roms
hope someone can help me with this...if anyone need more info about anything let me know and i'l give you all you need thanks to all in advance for all the help
PS...sorry if my english is not so good and hope you all understand what i said...and if my post is in wrong "place" sorry...move it where u think it should be
~~~~~~~~~~~~~~~~
FIXED ..all working now...so no more help needed
Click to expand...
Click to collapse
I hav the same problem... Can u help me..?
Hello Guyz , I am newbie , sorry in addvance for mistakes .
My problem is , My Nexus s internet not working , I have wifi modem connected to my main Antenna Modem ,
Laptop , Iphone etc. getting internet because they are able to connect Main modem threw wifi modem .
but nexus s connect to wifi modem , but not main antenna modem .
if i open 192.168.1.1 nexus s opens wifi modem config page ,
but laptop , and iphone open main modem's connect page ....
............
please guyzzz get me out of this problem , my modem is open no security , infact i have tried to put password on , but nothing worked . i have reset my phone twice , reset modem , Nothing working guyzz ...
waiting for your replies
hope u guyz reply soon
______________________
see this rough graph so u can understand the problem ...
Just for the fun of it, have you tried using another channel on your wifi router?
Just tapped in on my Nexus..
thnx buddy but not working stll
i tried on my friends home , he have phone line internet . Broadband . phone internet works fine there.
but not my home ,
Hi there,
I downloaded Insertcoin ICS rom for HTC Sensation & flashed it . everything seems to be ok & the rom working very good .
i have only 2 unsoloved issues about the rom .
1. if i use the mobile internet from the "quick setting" and after this i want to switch off the mobile internet it sometimes stuck and the only way to shut it done is in the "setting" panel and not in the "quick setting" .
2. when i tried to do reset to the phone it stuck and the only way to turn on the phone was to take off the battry & put it back again .
is anyone had the same issues ?
http://forum.xda-developers.com/showthread.php?t=1198684
this's the link to the rom treads .
Probably just some issues since it is in earlly build. Should get better with work.
Please hit the thank you button if i helped!
hello
I have installed the ICS rom on my mobile i have some problems
1- i can't connect to wireless network , i can't find any wifi network after turning on wifi the screen keep displaying Turning Wi-Fi on
2- trying to disable the cell broadcast but after restarting the phone it's enabled automatically.
3- arabic is supported but im looking for keyboard
plz i need help asap my device is useless now
im using the rom from this thread
http://forum.xda-developers.com/showthread.php?t=1526496
also update the frimware from this
http://forum.xda-developers.com/showthread.php?t=1459767
thanks
/facepalm
10 char
O_mardini said:
hello
I have installed the ICS rom on my mobile i have some problems
1- i can't connect to wireless network , i can't find any wifi network after turning on wifi the screen keep displaying Turning Wi-Fi on
2- trying to disable the cell broadcast but after restarting the phone it's enabled automatically.
3- arabic is supported but im looking for keyboard
plz i need help asap my device is useless now
im using the rom from this thread
http://forum.xda-developers.com/showthread.php?t=1526496
also update the frimware from this
http://forum.xda-developers.com/showthread.php?t=1459767
thanks
Click to expand...
Click to collapse
Hi,
I suggest you go to THIS THREAD ,and start again...
try it for the third time and still same im getting same problem